976 resultados para Phase-i-ii
Resumo:
The occurrence of HTLV-I/II and HIV-1 coinfections have been shown to be frequent, probably in consequence of their similar modes of transmission. This paper presents the prevalence of coinfection of HTLV among HIV-1 infected and AIDS patients in Belém, State of Pará, Brazil. A group of 149 patients attending the AIDS Reference Unit of the State Department of Health was tested for the presence of antibodies to HTLV-I/II using an enzyme immunoassay and the positive reactions were confirmed with a Western blot that discriminates between HTLV-I and HTLV-II infections. Four patients (2.7%) were positive to HTLV-I, seven (4.7%) to HTLV-II and one (0.7%) showed an indeterminate pattern of reaction. The present results show for the first time in Belém not only the occurrence of HTLV-II/HIV-1 coinfections but also a higher prevalence of HTLV-II in relation to HTLV-I. Furthermore, it also enlarges the geographical limits of the endemic area for HTLV-II in the Amazon region of Brazil.
Resumo:
The number of Hispanic workers in the U.S. construction industry has been steadily increasing, and language and cultural barriers have sometimes arisen on the jobsite. Due in part to these barriers, the number of fatalities among Hispanics at construction sites in 2001 jumped 24%, while construction fatalities overall dropped 3%. This study, which constitutes Phase III of the Hispanic Workforce Research Project, addresses these language and cultural barriers by investigating the most effective way to deliver training material developed in Phases I and II to Hispanic workers, American supervisors, and department of transportation (DOT) inspectors. The research methodology consisted of assessing the needs and interests of potential and current course participants in terms of exploring innovative ways to deliver the training. The training courses were then adapted and delivered to fit the specific needs of each audience. During Phase III of this project, the research team delivered the courses described in the Phase I and II reports to eight highway construction companies and two DOT groups. The courses developed in Phases I and II consist of four construction-focused language training courses that can be part of an effective training program to facilitate integration among U.S. and Hispanic workers, increase productivity and motivation at the jobsite, and decrease the existing high mortality rate for Hispanic workers. Moreover, the research team developed a course for the construction season called Toolbox Integration Course for Hispanic workers and American supervisors (TICHA), which consists of nine 45-minute modules delivered to one construction company over 11 weeks in the summer of 2005.
Resumo:
Background: Cetuximab significantly enhances efficacy of radiotherapy and chemotherapy in head and neck cancer. We investigated the safety and feasibility of adding cetuximab to neoadjuvant chemoradiation of locally advanced esophageal cancer. Methods: Pts with resectable, locally advanced squamous cell carcinoma (SCC) or adenocarcinoma (AC) of the thoracic esophagus or gastroesophageal junction (staged by EUS, CT and PET scan) were treated with 2 cycles of induction chemotherapy (docetaxel 75mg/m2, cisplatin 75mg/m2 q3w and weekly cetuximab 250mg/m2), followed by concomitant chemo- immuno-radiation therapy (CIRT: docetaxel 20mg/m2, cisplatin 25mg/m2 and cetuximab 250mg/m2 weekly five times concomitant with 45 Gy radiotherapy in 25 fractions); followed by surgery 4-8 weeks later. The phase I part consisted of 2 cohorts of 7 patients each, without and with docetaxel during CIRT, respectively. Interpatient dose-escalation (adding docetaxel during CIRT) was possible if < 2 out of 7 pts of the 1st cohort experienced limiting toxicity. Having finished the phase 1 part, 13 additional patients were treated with docetaxel-containing CIRT in a phase II part. Pathological response was evaluated according to the Mandard classification. Results: 27 pts from 12 institutions were included. As of today, results from 20 pts are available (cohort 1: 7, cohort 2: 7, phase ll : 6). Median age was 64yrs (range 47-71). 11 AC; 9 SCC. 19 pts (95%) completed CIRT (1 pt stopped treatment during induction therapy due to sepsis). 17 pts underwent resection (no surgery: 1pt for PD, 1pt for cardiac reasons). Grade 3 toxicities during CIRT included anorexia 15%, dysphagia/esophagitis 15%, fatigue 10%, nausea 10%, pruritus 5%, dehydration 5%, nail changes 5% and rash 5% .1 pt suffered from pulmonary embolism. 13 pts (65%, intention-to-treat) showed a complete or near complete pathological remission (cohort 1: 5, cohort 2: 4, phase II: 4). Conclusions: Adding cetuximab to preoperative chemoradiation for esophageal cancer is safe and feasible in a community-based multicenter setting. Antineoplastic activity is encouraging with 65% pathological responders.
Resumo:
Since the turn of the century, tributaries to the Missouri River in western Iowa have entrenched their channels to as much as six times their original depth. This channel degradation is accompanied by widening as the channel side slopes become unstable and landslides occur. The deepening and widening of these streams have endangered about 25% of the highway bridges in 13 counties [Lohnes et al. 1980]. Grade stabilization structures have been recommended as the most effective remedial measure for stream degradation [Brice et al., 1978]. In western Iowa, within the last seven years, reinforced concrete grade stabilization structures have cost between $300,000 and $1,200,000. Recognizing that the high cost of these structures may be prohibitive in many situations, the Iowa Department of Transportation (Iowa DOT) sponsored a study at Iowa State University (ISU) to find low-cost alternative structures. This was Phase I of the stream degradation study. Analytical and laboratory work led to the conclusion that alternative construction materials such as gabions and soil-cement might result in more economical structures [Lohnes et al. 1980]. The ISU study also recommended that six experimental structures be built and their performance evaluated. Phase II involved the design of the demonstration structures, and Phase III included monitoring and evaluating their performance.
Resumo:
Mixture materials, mix design, and pavement construction are not isolated steps in the concrete paving process. Each affects the other in ways that determine overall pavement quality and long-term performance. However, equipment and procedures commonly used to test concrete materials and concrete pavements have not changed in decades, leaving gaps in our ability to understand and control the factors that determine concrete durability. The concrete paving community needs tests that will adequately characterize the materials, predict interactions, and monitor the properties of the concrete. The overall objectives of this study are (1) to evaluate conventional and new methods for testing concrete and concrete materials to prevent material and construction problems that could lead to premature concrete pavement distress and (2) to examine and refine a suite of tests that can accurately evaluate concrete pavement properties. The project included three phases. In Phase I, the research team contacted each of 16 participating states to gather information about concrete and concrete material tests. A preliminary suite of tests to ensure long-term pavement performance was developed. The tests were selected to provide useful and easy-to-interpret results that can be performed reasonably and routinely in terms of time, expertise, training, and cost. The tests examine concrete pavement properties in five focal areas critical to the long life and durability of concrete pavements: (1) workability, (2) strength development, (3) air system, (4) permeability, and (5) shrinkage. The tests were relevant at three stages in the concrete paving process: mix design, preconstruction verification, and construction quality control. In Phase II, the research team conducted field testing in each participating state to evaluate the preliminary suite of tests and demonstrate the testing technologies and procedures using local materials. A Mobile Concrete Research Lab was designed and equipped to facilitate the demonstrations. This report documents the results of the 16 state projects. Phase III refined and finalized lab and field tests based on state project test data. The results of the overall project are detailed herein. The final suite of tests is detailed in the accompanying testing guide.
Resumo:
This report documents Phase III of a four-phase project. The goals of the project are to study the feasibility of using advanced technology from other industries to improve he efficiency and safety of winter highway maintenance vehicle operations, and to provide travelers with the level of service defined by policy during the winter season at the least cost to the taxpayers. The results of the first phase of the research were documented in the Concept Highway Maintenance Vehicle Final Report: Phase One dated April 1997, which describes the desirable functions of a concept maintenance vehicle and evaluates its feasibility. Phase I concluded by establishing the technologies that would be assembled and tested on the prototype vehicles in Phase II. The primary goals of phase II were to install the selected technologies on the prototype winter maintenance vehicles and to conduct proof of concept in advance of field evaluations planned for Phase III. This Phase III final report documents the work completed since the end of Phase II. During this time period, the Phase III work plan was completed and the redesigned friction meter was field tested. A vendor meeting was held to discuss future private sector participation and the new design for the Iowa vehicle. In addition, weather and roadway condition data were collected from the roadway weather information systems at selected sites in Iowa and Minnesota, for comparison to the vehicles' onboard temperature sensors. Furthermore, the team received new technology, such as the mobile Frensor unit, for bench testing and later installation.
Resumo:
An assay for the simultaneous analysis of pharmaceutical compounds and their metabolites from micro-whole blood samples (i.e. 5 microL) was developed using an on-line dried blood spot (on-line DBS) device coupled with hydrophilic interaction/reversed-phase (HILIC/RP) LC/MS/MS. Filter paper is directly integrated to the LC device using a homemade inox desorption cell. Without any sample pretreatment, analytes are desorbed from the paper towards an automated system of valves linking a zwitterionic-HILIC column to an RP C18 column. In the same run, the polar fraction is separated by the zwitterionic-HILIC column while the non-polar fraction is eluted on the RP C18. Both fractions are detected by IT-MS operating in full scan mode for the survey scan and in product ion mode for the dependant scan using an ESI source. The procedure was evaluated by the simultaneous qualitative analysis of four probes and their relative phase I and II metabolites spiked in whole blood. In addition, the method was successfully applied to the in vivo monitoring of buprenorphine metabolism after the administration of an intraperitoneal injection of 30 mg/kg on adult female Wistar rat.
Resumo:
The state Departments of Transportation (DOTs) of Iowa, Michigan, and Minnesota formed a consortium to define and develop the next generation highway maintenance vehicle. The Center for Transportation Research and Education of Iowa State University provided staff support to the concept highway maintenance vehicle project, which focused on winter maintenance activities. Phase I of the three-phase project focused on describing the desirable functions of a concept maintenance vehicle. Phase II will include the development, operation, and evaluation of prototype winter maintenance vehicles. Phase III is envisioned to be a comprehensive fleet evaluation of prototype winter maintenance vehicles. This report covers the activities of Phase I. Phase I included conducting a literature review of materials related to winter highway maintenance activities, identifying ideal capabilities of a winter maintenance vehicle, inviting private sector equipment and technology providers to join the project and commit equipment and expertise for Phase II, and determining the specific equipment and technology to be included on the three prototype vehicles for the winter of 1996-1997. Phase I concluded by establishing that assembling the three prototype vehicles would be beneficial to the project and to the three state DOTs.
Resumo:
Access management involves balancing the dual roles that roadways must play - through travel and access to property and economic activity. When these roles are not in proper balance, the result is a roadway system that functions sub-optimally. Arterial routes that have a too high driveway density and provide overly extensive access to property have high crash rates and begin to suffer in terms of traffic operations. Such routes become congested, delays increase, and mean travel speeds decline. The Iowa access management research and awareness project has had four distinct phases. Phase I involved a detailed review of the extensive national access management literature so lessons learned elsewhere could be applied in Iowa. In Phase II original case study research was conducted in Iowa. Phase III of the project concentrated on outreach and education about access management. Phase IV of the Iowa access management project extended the work conducted during Phases II and III. The main work products for Phase IV were as follows: 1) three additional before and after case studies, illustrating the impacts of various access management treatments on traffic safety, traffic operations, and business vitality; 2) an access management handbook aimed primarily at local governments in Iowa; 3) a modular access management toolkit with brief descriptions of various access management treatments and considerations; and 4) an extensive outreach plan aimed at getting the results of Phases I through IV of the project out to diverse audiences in Iowa and elsewhere.
Resumo:
Objectives: The aim of the study was to combine clinical results from the European Cohort of the REVERSE study and costs associated with the addition of cardiac resynchronization therapy (CRT) to optimal medical therapy (OMT) in patients with mild symptomatic (NYHA I-II) or asymptomatic left ventricular dysfunction and markers of cardiac dyssynchrony in Spain. Methods: A Markov model was developed with CRT + OMT (CRT-ON) versus OMT only (CRT-OFF) based on a retrospective cost-effectiveness analysis. Raw data was derived from literature and expert opinion, reflecting clinical and economic consequences of patient"s management in Spain. Time horizon was 10 years. Both costs (euro 2010) and effects were discounted at 3 percent per annum. Results: CRT-ON showed higher total costs than CRT-OFF; however, CRT reduced the length of hospitalization in ICU by 94 percent (0.006 versus 0.091 days) and general ward in by 34 percent (0.705 versus 1.076 days). Surviving CRT-ON patients (88.2 percent versus 77.5 percent) remained in better functional class longer, and they achieved an improvement of 0.9 life years (LYGs) and 0.77 years quality-adjusted life years (QALYs). CRT-ON proved to be cost-effective after 6 years, except for the 7th year due to battery depletion. At 10 years, the results were 18,431 per LYG and 21,500 per QALY gained. Probabilistic sensitivity analysis showed CRT-ON was cost-effective in 75.4 percent of the cases at 10 years. Conclusions: The use of CRT added to OMT represents an efficient use of resources in patients suffering from heart failure in NYHA functional classes I and II.
Resumo:
Adenylyl cyclase (AC) isoforms catalyze the synthesis of 3',5'-cyclic AMP from ATP. These isoforms are critically involved in the regulation of gene transcription, metabolism, and ion channel activity among others. Nitric oxide (NO) is a gaseous product whose synthesis from L-arginine is catalyzed by the enzyme NO synthase. It has been well established that NO activates the enzyme guanylyl cyclase, but little has been reported on the effects of NO on other important second messengers, such as AC. In the present study, the effects of sodium nitroprusside (SNP), a nitric oxide-releasing compound, on COS-7 cells transfected with plasmids containing AC types I, II, V and VI were evaluated. Total inhibition (~98.5%) of cAMP production was observed in COS-7 cells transfected with the AC I isoform and previously treated with SNP (10 mM) for 30 min, when stimulated with ionomycin. A high inhibition (~76%) of cAMP production was also observed in COS-7 cells transfected with the AC VI isoform and previously treated with SNP (10 mM) for 30 min, when stimulated with forskolin. No effect on cAMP production was observed in cells transfected with AC isoforms II and V.
Resumo:
El present treball analitza al microscopi òptic i al microscopi electrònic de transmissió el testicle de Sus domesticus (raça Landrace - varietat anglesa) a partir de mascles reproductors porcins adults i sans. L'objectiu principal de tots els centres d'Inseminació Artificial Porcina i de les Explotacions de Selecció i Multiplicació Porcina és garantir una excel·lent qualitat espermàtica al llarg de la vida reproductiva útil d'un mascle reproductor porcí. Així doncs, un millor coneixement dels patrons estructural i ultraestructural normals del testicle permetrà diagnosticar amb facilitat quina ha estat l'estructura o funció testicular afectada quan s'observa una disminució de la qualitat del semen. Les anàlisis seminals i hormonals són certament crucials en la valoració d'aquests mascles, però, no són totalment informatives de les alteracions testiculars, ja que és necessari conèixer l'organització microscòpica. Diversos estudis sobre testicle han demostrat que els marcadors més sensibles per a l'avaluació de la funció testicular són els següents: (1) la grandària testicular, (2) el gruix i l'organització de la càpsula testicular, (3) el percentatge de túbuls seminífers i de teixit intersticial en el parènquima testicular, (4) el diàmetre dels túbuls seminífers, (5) l'alçada i la composició de cèl·lules germinals de l'epiteli seminífer, (6) el gruix i l'organització de la làmina pròpia i, (7) la morfologia i la grandària de les cèl·lules de Leydig. El primer objectiu concret del present estudi ha estat, per tant, caracteritzar tots aquests paràmetres testiculars en mascles porcins sans i adults. L'organització estructural del testicle i les mesures quantitatives utilitzades com a marcadors no mostren diferències significatives ni entres els mascles porcins (P > 0,01), ni entre el testicle dret i l'esquerre (P > 0,01). Els testicles, de 330,80 16,99 g de pes, estan envoltats per una càpsula, de 2.375,13 246,68 m de gruix, la qual es divideix en tres capes: la túnica vaginalis constitueix l'1,82 0,78 % de la càpsula i està composta per una capa mesotelial externa i una capa interna de teixit conjuntiu dens; la túnica albuginea representa el 37,31 3,27 % i és de teixit conjuntiu dens i, la túnica vasculosa constitueix el 64,24 4,40 % i és de teixit conjuntiu lax. En el parènquima testicular els túbuls seminífers i el teixit intersticial representen el 72,44 2,12 % i el 27,46 2,12 %, respectivament. Els túbuls seminífers, de 226,23 18,08 m de diàmetre, es troben fortament recargolats i empaquetats, i estan compostos per la làmina pròpia i l'epiteli seminífer. La làmina pròpia, de 4-4,5 m de gruix, està formada per la làmina basal i dues capes de cèl·lules peritubulars. L'epiteli seminífer, amb una alçada mitjana de 66,11 10,62 m, és columnar i estratificat amb cèl·lules de Sertoli i diferents generacions d'espermatogònies, espermatòcits i espermàtides. El teixit intersticial és un teixit conjuntiu lax amb abundants cèl·lules de Leydig polièdriques fortament empaquetades (ca. 15 x 12 m). El segon objectiu concret d'aquest estudi ha estat estudiar des del punt de vista morfològic i morfomètric (alçada, longitud, freqüència relativa d'aparició i durada) els estadis del cicle de l'epiteli seminífer en els mascles porcins de la raça Landrace (varietat anglesa), classificats d'acord amb el mètode de la morfologia tubular. Els estadis premeiòtics ( I, II i III) ocupen el 31,9 % del cicle espermatogènic i es caracteritzen, principalment, per la presència de cèl·lules en les fase inicials de la meiosi I. Les primeres etapes de la meiosi I no afecten els paràmetres morfomètrics de l'epiteli seminífer ja que els valors obtinguts per l'alçada de l'epiteli seminífer, la freqüència relativa, la longitud i la durada d'aquests estadis són molt variables. Els estadis meiòtics (IV i V) representen el 16,4 % del cicle espermatogènic i estan constituïts, principlament, per cèl·lules en un estat avançat de la meiosi I i /o cèl·lules en meiosi II. Les últimes fases de la meiosi I i també de la meiosi II tenen lloc ràpidament, la qual cosa resulta en una baixa freqüència relativa d'aparició i, per tant, en una baixa durada dels estadis meiòtics. Els estadis postmeiòtics (VI, VII i VIII) ocupen el 50,6 % del cicle espermatogènic. L'esdeveniment més important que té lloc en aquests estadis és la fase de maduració de l'espermiogènesi. En la fase de maduració, les espermàtides experimenten diverses modificacions morfològiques i estructurals que donen lloc, finalment, als espermatozoides. La complexitat d'aquests processos fa que els estadis postmeiòtics presentin valors més grans de freqüència relativa, longitud i durada. El tercer objectiu concret d'aquest treball ha estat descriure a nivell ultraestructural el procés d'espermiogènesi, i relacionar les transformacions que experimenten les espermàtides en fase d'elongació amb els canvis ultraestructurals que tenen lloc en les diferents cèl·lules que constitueixen el testicle (cèl·lules germinals, de Sertoli i de Leydig, principalment). L'espermiogènesi del mascle porcí de la raça Landrace (varietat anglesa) s'ha dividit en 9 passos que vénen definits per 9 tipus diferents d'espermàtides. Al llarg de l'espermiogènesi no s'observen diferències ultraestructurals significatives (P > 0,01) ni entre els mascles porcins ni entre el testicle esquerre i dret en les cèl·lules que constitueixen el testicle.
Resumo:
Introdução. Embora muitas crianças com câncer possam ser curadas, um número significativo têm resposta insatisfatória por ineficácia da terapêutica tornando necessário identificar agentes anticâncer mais efetivos contra tumores refratários ou recaídos. Estudos com Etoposide revelaram uma clara relação entre o tempo de exposição e os seus efeitos citotóxicos, mostrando resultados superiores com o uso de doses fracionadas quando comparado ao uso de uma dose única. Estudos de farmacocinética sugerem que as concentrações plasmáticas ativas de Etoposide se situa entre 1 e 5 μg/ml e que níveis acima de 5 μg/ml determinam uma mielotoxicidade importante. O Etoposide apresenta um bom espectro antitumoral mesmo em pacientes que já foram tratados por via parenteral e uma adequada biodisponibilidade pela via oral, podendo ser administrado com segurança em regime ambulatorial. Portanto, torna-se atraente a busca de esquemas de administração deste agente, os quais produzem níveis de concentração plasmática seguras pelo maior tempo possível. Objetivos. Os objetivos deste estudo de fase I é avaliar o perfil de toxicidade, a toxicidade dose-limitante, a dose máxima tolerada, a farmacocinética plasmática e a dose segura do Etoposide oral recomendada para estudos de fase II em pacientes pediátricos portadores de tumor sólido refratário. Materiais e Métodos. Todos os pacientes eram portadores de tumor sólido não responsivo aos tratamentos estabelecidos. A dose inicial do Etoposide foi de 20mg/m2/dose, a cada 8 horas durante 14 dias seguido de um intervalo de 7 dias antes de iniciar o próximo ciclo. A farmacocinética plasmática do Etoposide foi estudada durante o primeiro dia de tratamento e os níveis de Etoposide determinados pelo método de HPLC. Resultados. Dezessete pacientes foram incluídos no estudo, sendo que em 13 foram realizados o estudo de farmacocinética. O número total de cursos de quimioterapia foi de 64. Nove pacientes foram incluídos no Nível de dose I, sendo que leucopenia grau 2-3 foi observada em 5. A dose foi então escalonada para 25 mg/m2 (Nível de dose II) e fornecida a 8 pacientes subsequentes o que determinou leucopenia grau 3-4 em 4 deles. Este Nível de dose foi então considerado como DMT (Dose Máxima Tolerada). A TDL foi neutropenia. As concentrações plasmáticas máximas de Etoposide nos pacientes incluídos no Nível de dose I e II foram de 2,97 e 8,59 μg/ml, respectivamente, e os níveis da droga >1 μg/ml foi mantido durante cerca de 6,3 horas após a administração da droga em ambos os níveis de dose. Resposta parcial foi observada em 1 paciente e 4 apresentaram doença estável. Conclusões. A administração prolongada de Etoposide oral nas doses de 20 mg/m2 a cada 8 horas durante 14 dias consecutivos, seguidos de 7 dias de repouso, foi bem tolerada e determinou uma toxicidade manejável em crianças e adolescentes portadores de doenças malignas refratárias. A dose de 20 mg/m2 aparentemente preencheu os requisitos farmacocinéticos que objetivam melhorar o índice terapêutico do Etoposide, ou seja, a obtenção de níveis plasmáticos citotóxicos sustentados e abaixo do limite de toxicidade clínica da droga.
Resumo:
ABSTRACT: The occurrence of HTLV-I/II and HIV-1 coinfections have been shown to be frequent, probably in consequence of their similar modes of transmission. This paper presents the prevalence of coinfection of HTLV among HIV-1 infected and AIDS patients in Belém, State of Pará, Brazil. A group of 149 patients attending the AIDS Reference Unit of the State Department of Health was tested for the presence of antibodies to HTLV-I/II using an enzyme immunoassay and the positive reactions were confirmed with a Western blot that discriminates between HTLV-I and HTLV-II infections. Four patients (2.7%) were positive to HTLV-I, seven (4.7%) to HTLV-II and one (0.7%) showed an indeterminate pattern of reaction. The present results show for the first time in Belém not only the occurrence of HTLV-II/HIV-1 coinfections but also a higher prevalence of HTLV-II in relation to HTLV-I. Furthermore, it also enlarges the geographical limits of the endemic area for HTLV-II in the Amazon region of Brazil.
Resumo:
Seed dispersal effectiveness (SDE) is a conceptual framework that aims at quantifying the contribution of seed dispersal vectors to plant fitness. While it is well recognized that diplochorous dispersal systems, characterized by two successive dispersal steps performed by two different vectors (Phase I=primary seed dispersal and Phase II=secondary seed dispersal) which are common in temperate and tropical regions, little attention has been given to distinguishing the relative contribution of one-phase and two-phase dispersal to overall SDE. This conceptual gap probably results from the lack of a clear methodology to include Phase II dispersal into the calculation of SDE and to quantify its relative contribution. We propose a method to evaluate the relative contribution of one-phase and two-phase dispersal to SDE and determine whether two seed dispersers are better than one. To do so, we used the SDE landscape and an extension of the SDE landscape, the Phase II effect landscape, which measures the direction and magnitude of the Phase II dispersal effect on overall SDE. We used simulated and empirical data from a diplochorous dispersal system in the Peruvian Amazon to illustrate this new approach. Our approach provides the relative contribution of one-phase SDE (SDE1) and two-phase SDE (SDE2) to overall SDE and quantifies how much SDE changes with the addition of Phase II dispersal. Considering that the seed dispersal process is context dependent so that Phase II depends on Phase I, we predict the possible range of variation of SDE according to the variation of the probability of Phase II dispersal. In our specific study system composed of two primate species as primary dispersal vectors and different species of dung beetles as secondary dispersal vectors, the relative contribution of SDE1 and SDE2 to overall SDE varied between plant species. We discuss the context dependency of the Phase II dispersal and the potential applications of our approach. This extension to the conceptual framework of SDE enables quantitative evaluation of the effect of Phase II dispersal on plant fitness and can be easily adapted to other biotic and/or abiotic diplochorous dispersal systems.