Microwave Dielectric Resonator Based on Ba[(Bi0.2 D3+0.3)Nb0.5]O3(D3+=Y,Pr,Sm,Gd,Dy,Er)

Dielectric resonator ceramics with composition formula Ba[(D3+0.3 Bi0.2)Nb0.5]O3,where D3+=Y,Pr,Sm,Gd,Dy and Er,were prepared by the conventional ceramic preparation route

Preparation, Characterization, and Microwave Properties of RETiNbO6 (RE = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Y, and Yb) Dielectric Ceramics

Microwave ceramic dielectric resonators (DRs) based on RETiNbO6 (RE = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Y, and Yb) have been prepared using the conventional solid -state ceramic route. The DR samples are characterized using XRD and SEM methods. The microwave dielectric properties are measured using resonant methods and a net work analyzer . The ceramics based on Ce, Pr, Nd, and Sin have dielectric constants in the range 32-54 and positive coefficient of thermal variation of resonant frequency (r,). The ceramics based on Gd, Tb, Dy, Y. and Yb have dielectric constants in the range 19-22 and negative Tf

Synthesis,Characterization and Properties of [REI_xREX]TiNb06 Dielectric Ceramics

Dielectric ceramics based on solid solution phases of [RE1_x= REr]TiNb06, where REI_s = Nd, Pr, Sm and RE' = Dy, Gd and Y, were prepared by the conventional solid-state ceramic route for values of x. The ceramic samples are characterized by X-ray diffraction and microwave methods. Ceramics based on RE (Pr, Nd and Sm) belonging to aeschynite group shows positive value of Tf and those based on RE (Gd, Dy and Y) belonging to euxenite group show negative value of r f. The solid solution phases between the aeschynite and the euxenite group shows intermediate dielectric constant and r f values. The results indicate the possibility of tailoring the dielectric properties by varying the composition of the solid solution phases. The range of solid solubility of euxenite in aeschenite and aeschenite in euxenite are different for different rare earth ions

Microwave Dielectric Properties of RETiTaO6 (RE = La, Ce,Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, Al, and In) Ceramics

Microwave dielectric ceramics based on RETiTaO6 (RE = La, Cc, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, Al, and In) were prepared using a conventional solid-state ceramic route. The structure and microstructure of the samples were analyzed using x-ray diffraction and scanning electron microscopy techniques. The sintered samples were characterized in the microwave frequency region. The ceramics based on Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy, which crystallize in orthorhombic aeschynite structure, had a relatively high dielectric constant and positive T f while those based on Ho, Er, and Yb, with orthorhombic euxenite structure, had a low dielectric constant and negative Tf. The RETiTaO6 ceramics had a high-quality factor. The dielectric constant and unit cell volume of the ceramics increased with an increase in ionic radius of the rare-earth ions, but density decreased with it. The value of Tf increased with an increase in RE ionic radii, and a change in the sign of Tf occurred when the ionic radius was between 0.90 and 0.92 A. The results indicated that the boundary of the aeschynite to euxenite morphotropic phase change lay between DyTiTaO6 and HoTiTaO6. Low-loss ceramics like ErTiTaO6 (Er = 20.6, Qxf = 85,500), EuTiTaO6 (Er = 41.3, Qxf = 59,500), and YTiTaO6 (Er = 22.1, Q„xf = 51,400) are potential candidates for dielectric resonator applications

Spectral and Nonlinear Optical Characteristics of ZnO Nanocomposites

The spectral and nonlinear optical properties of ZnO based nanocomposites prepared by colloidal chemical synthesis are investigated. Very strong UV emissions are observed from ZnO–Ag, ZnO– Cu and ZnO–SiO2 nanocomposites. The strongest visible emission of a typical ZnO–Cu nanocomposite is over ten times stronger than that of pure Cu due to transition from deep donor level to the copper induced level. The optical band gap of ZnO–CdS and ZnO–TiO2 nanocomposites is tunable and emission peaks changes almost in proportion to changes in band gap. Nonlinear optical response of these nanocomposites is studied using nanosecond laser pulses from a tunable laser in the wavelength range of 450–650 nm at resonance and off-resonance wavelengths. The nonlinear response is wavelength dependent and switching from RSA to SA has been observed at resonant wavelengths. Such a change-over is related to the interplay of plasmon/exciton band bleach and optical limiting mechanisms. The observed nonlinear absorption is explained through two photon absorption followed by weak free carrier absoption, interband absorption and nonlinear scattering mechanisms. The nonlinearity of the silica colloid is low and its nonlinear response can be improved by making composites with ZnO and ZnO–TiO2. The increase of the third-order nonlinearity in the composites can be attributed to the enhancement of exciton oscillator strength. This study is important in identifying the spectral range and the composition over which the nonlinear material acts as an RSA based optical limiter. These nanocomposites can be used as optical limiters and are potential materials for the light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.

Spectral and Nonlinear Optical Characteristics of ZnO Nanocomposites

The spectral and nonlinear optical properties of ZnO based nanocomposites prepared by colloidal chemical synthesis are investigated. Very strong UV emissions are observed from ZnO–Ag, ZnO– Cu and ZnO–SiO2 nanocomposites. The strongest visible emission of a typical ZnO–Cu nanocomposite is over ten times stronger than that of pure Cu due to transition from deep donor level to the copper induced level. The optical band gap of ZnO–CdS and ZnO–TiO2 nanocomposites is tunable and emission peaks changes almost in proportion to changes in band gap. Nonlinear optical response of these nanocomposites is studied using nanosecond laser pulses from a tunable laser in the wavelength range of 450–650 nm at resonance and off-resonance wavelengths. The nonlinear response is wavelength dependent and switching from RSA to SA has been observed at resonant wavelengths. Such a change-over is related to the interplay of plasmon/exciton band bleach and optical limiting mechanisms. The observed nonlinear absorption is explained through two photon absorption followed by weak free carrier absoption, interband absorption and nonlinear scattering mechanisms. The nonlinearity of the silica colloid is low and its nonlinear response can be improved by making composites with ZnO and ZnO–TiO2. The increase of the third-order nonlinearity in the composites can be attributed to the enhancement of exciton oscillator strength. This study is important in identifying the spectral range and the composition over which the nonlinear material acts as an RSA based optical limiter. These nanocomposites can be used as optical limiters and are potential materials for the light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.

A STUDY ON SOFTWARE DEVELOPMENT PROJECT RISK, RISK MANAGEMENT, PROJECT OUTCOMES AND THEIR INTER-RELATIONSHIP

This research was undertaken with an objective of studying software development project risk, risk management, project outcomes and their inter-relationship in the Indian context. Validated instruments were used to measure risk, risk management and project outcome in software development projects undertaken in India. A second order factor model was developed for risk with five first order factors. Risk management was also identified as a second order construct with four first order factors. These structures were validated using confirmatory factor analysis. Variation in risk across categories of select organization / project characteristics was studied through a series of one way ANOVA tests. Regression model was developed for each of the risk factors by linking it to risk management factors and project /organization characteristics. Similarly regression models were developed for the project outcome measures linking them to risk factors. Integrated models linking risk factors, risk management factors and project outcome measures were tested through structural equation modeling. Quality of the software developed was seen to have a positive relationship with risk management and negative relationship with risk. The other outcome variables, namely time overrun and cost over run, had strong positive relationship with risk. Risk management did not have direct effect on overrun variables. Risk was seen to be acting as an intervening variable between risk management and overrun variables.

Electroactive Dipyrromethene-Cu(II) Monolayers Deposited onto Gold Electrodes for Voltammetric Determination of Paracetamol

Dipyrromethene-Cu(II) derivatives possessing two dodecane alkyl chains have been used for the modification of gold electrodes. Electroactive host molecules have been incorporated into a lipophilic dodecanethiol SAM deposited onto gold electrodes through hydrophobic and van der Waals interactions (embedment technique). The presence of dipyrromethene-Cu(II) redox centers on the electrode surface was proved by cyclic voltammetry and Osteryoung square-wave voltammetry. The Au electrodes incorporating redox active Cu(II)-dipyrromethene SAMs were used for the direct voltammetric determination of paracetamol in human plasma.

Southern Hemispheric Features and their Teleconnection with Indian Summer Monsoon

This thesis entitled southern hemispheric features and their Teleconnection with indian summer monsoon.Southern hemisphere is entirely distinct from the northern hemisphere in many aspects, which is well reflected in atmospheric and oceanic properties.The thesis consists of eight chapters, in which the first chapter contains an overview of southern hemisphere. In this chapter, variability in southern hemisphere is described along with Indian summer monsoon and its teleconnection. The different types of data sets used and various methodologies adopted in the present thesis were described in Chapter 2. The period of climate shift and the magnitude of anomalies after the climate shift, which extended from troposphere to stratopause level, were investigated in detail and presented in chapter 3. Chapter 4 depicts the recent trend and variability in southern stratosphere. The higher order variability during various months and the frequency of extremity is included in this chapter.Climatology of divergence and convergence after the documented shift is reported in chapter 5.Southern extratropical connection to Indian summer monsoon through the modulation of SAM is presented in Chapter 6.Chapter 7 deals with the modulation of SAM‐Monsoon link through North Atlantic Oscillation.

Comparison of Statistical and Semantic Similarity Techniques for Paraphrase Identification

This paper compares statistical technique of paraphrase identification to semantic technique of paraphrase identification. The statistical techniques used for comparison are word set and word-order based methods where as the semantic technique used is the WordNet similarity matrix method described by Stevenson and Fernando in [3].

Impact of Product Quality, Service Quality and Contextual Experience on Customer Perceived Value and Future Buying Intentions

Recognizing that high satisfaction leads to high customer loyalty, companies today are aiming for total customer satisfaction. This article explains relative impact of product quality, service quality and contextual experience on customer perceived value and intention to shop in the future. The data has been collected using a questionnaire from 205 customers of a national retailer chain. The relative importance of product quality, service quality and contextual experience on customer perceived value and thus on customer preference and future intentions was measured using multiple regression. Also, the contribution of perceived value to preference and thus on future buying intention was also measured. Structural Equation Model (SEM) using Amos 4 was used to find the overall fitness of the model. It was found that product quality, service quality and contextual experience have a major influence on customer perceived value

Wie viele Guppys leben in Santiago? Zur Ubiquität des numerischen Priming beim Ankereffekt

Das wohl bekannteste Phänomen der Urteils- und Entscheidungsforschung im Kontext numeri-scher Urteile ist der Ankereffekt. Dieser bezeichnet die Assimilation einer numerischen Schätzung oder Prognose an einen salienten Wert, dem sogenannten Anker, auch unabhängig von dessen inhaltlicher Relevanz. Die Frage nach den Ursachen von Ankereffekten wird bis zum aktuellen Zeitpunkt kontrovers diskutiert. Die Bedeutung eines Erklärungsmodelles, dem sogenannten numerischem Priming, innerhalb dieser Diskussion ist Gegenstand der vorliegenden Arbeit. Im Theorieteil wird zunächst der Ankereffekt, seine inhaltliche Einordnung und seine Relevanz aus theoretischer wie praktischer Sicht diskutiert. Des weiteren werden die gängigen Erklärungsmodelle zum Ankereffekt vorgestellt. Ein Schwerpunkt hierbei liegt auf einer kritischen Auseinandersetzung mit dem Modell der selektiven Zugänglichkeit (Selective Accessibility Model, kurz: SAM), dem wohl prominentesten Modell aus Sicht der momentanen Forschung. Zwei an den Theorieteil anschließende Fragestellungen sind dann der Gegenstand des empirischen Teils der Arbeit. Zum einen soll überprüft werden, ob Ankereffekte im Standardparadigma, wie bisher angenommen, allein auf den Prozessen des SAM basieren oder ob zusätzlich auch numerisches Priming am Zustandekommen des Ankereffektes in diesem Paradigma beteiligt ist. Zum anderen werden Voraussetzungen für das Auftreten von Ankereffekten durch numerisches Priming untersucht, inbesondere die als relevant eingeschätzte Bedeutung der Aufmerksamkeit gegenüber dem Ankerwert. Beide Experimente verwenden neue, im Kontext von Ankereffekten bisher nicht eingesetzte experimentelle Paradigmen. Um die Bedeutung semantischer Prozesse im Zusammenspiel mit numerischen Prozessen zu untersuchen, wird ein so genannter Objektvergleich eingesetzt. Der Stellenwert von Aufmerksamkeit hingegen wird überprüft, in dem die Ankerwerte subliminal, also unterhalb der Wahrnehmungsschwelle, präsentiert werden. Beiden Experimenten ist jeweils eine Voruntersuchung vorangestellt, die notwendige Bedingungen für die entsprechenden Experimente überprüfen. In der abschließenden Diskussion werden die Ergebnisse der beiden Untersuchungen noch einmal zusammengefasst, und deren Implikationen angesichts der bisher vorliegenden Erkenntnisse aus theoretischer wie praktischer Sicht diskutiert. Des weiteren werden mögliche Forschungsfragen und denkbare experimentelle Untersuchungen hierzu skizziert, die an die innerhalb dieser Arbeit vorgelegten Ergebnisse sinnvoll anschließen könnten.

Synthese und Charakterisierung neuer Schwefel-Tripodliganden für monomolekulare Filme auf Goldoberflächen

Durch Selbstorganisation gebildete monomolekulare Filme spielen eine große Rolle bei der gezielten Funktionalisierung von Oberflächen. Sie entstehen meist durch in situ Adsorption von Adsorbatmolekülen auf Substratoberflächen. Ankergruppen stellen dabei das mit dem Substrat wechselwirkende Molekülsegment dar. Dreizähnig konstruierte Ankergruppen, die über ein vierbindiges Verzweigungsatom im Molekül integriert sind, zeichnen sich durch den Vorteil aus, dass sie eine senkrechte Anordnung der Adsorbatmoleküle zur Substratoberfläche bevorzugen. Die Interaktion von schwefelhaltigen Ankergruppen in Form von Thioether-Einheiten mit Goldsubstraten stellt dabei ein besonders interessantes und vielversprechendes System dar und wurde in dieser Arbeit durch tripodale (Methylthio)methyl-Einheiten realisiert. Die Ordnung der Monolagen kann durch starr konstruierte Moleküle erhöht werden, da rigide Strukturelemente die intramolekulare Flexibilität der Moleküle herabsetzen. Es ist gelungen, im Rahmen dieser Arbeit zwei neue tripodale Thioetherliganden darzustellen. Die Dreizähnigkeit der Liganden konnte auf Basis molekularer Koordinationschemie belegt werden. Durch Synthese der Tricarbonylwolfram-(0)-Ligand-Komplexe konnten pseudo-oktaedrische Chelat-Komplexe eindeutig charakterisiert werden. Desweiteren ist es gelungen, die geordnete Monolagenbildung auf Gold zu bestätigen und vielfältig zu charakterisieren. Zwei neue ferrocenylfunktionalisierte Halogen-Derivate konnten dargestellt werden und erweitern damit die vorhandene Bibliothek dieser Substanzgruppe. Daraus ist in einer nächsten Stufe ein direktes Edukt für die Synthese ferrocenylfunktionalisierter Schwefel-Tripodliganden entstanden. Diese Arbeit war Teil eines Kooperationsprojekts mit der Arbeitsgruppe Experimentalphysik I in Rahmen des CINSaT. Die neu dargestellten Verbindungen wurden in dieser Arbeitsgruppe hinsichtlich ihrer Adsorptionseigenschaften auf Gold(111)-Oberflächen eingehend untersucht und die entstandenen Monolagen charakterisiert (SHG, Ellipsometrie, XPS, STM, FTIR). Ein Zweistufenprozeß der Filmbildung konnte entwickelt werden.

Dipodal Ferrocene Derivatives for Nanostructured Redox-Functionalised Surfaces

Self-assembled monolayers (SAMs) on solid surfaces are of great current interest in science and nanotechnology. This thesis describes the preparation of several symmetrically 1,1’-substituted ferrocene derivatives that contain anchoring groups suitable for chemisorption on gold and may give rise to SAMs with electrochemically switchable properties. The binding groups are isocyano (-NC), isothiocyanato (-NCS), phosphanyl (-PPh2), thioether (-SR) and thienyl. In the context of SAM fabrication, isothiocyanates and phosphanes are adsorbate systems which, surprisingly, have remained essentially unexplored. SAMs on gold have been fabricated with the adsorbates from solution and investigated primarily by X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy. The results of these analytical investigations are presented and discussed in matters of the film quality and possible binding modes. The quality of self-assembled monolayers fabricated from 1,1’-diisocyanoferrocene and 1,1’-diisothiocyanatoferrocene turned out to be superior to that of films based on the other adsorbate species investigated. Films of those absorbates as well as of dppf afforded well-defined SAMs of good quality. All other films of this study based on sulfur containing anchoring groups exhibit chemical inhomogeneity and low orientational order of the film constituents and therefore failed to give rise to well-defined SAMs. Surface coordination chemistry is naturally related to molecular coordination chemistry. Since all SAMs described in this thesis were prepared on gold (111) surfaces, the ferrocene-based ligands of this study have been investigated in their ability for complexation towards gold(I). The sulfur-based ferrocene ligands [fc(SR)2] failed to give stable gold(I) complexes. In contrast, 1,1’-diisocyanoferrocene (1) proved to be an excellent ligand for the complexation of gold(I). Several complexes were prepared and characterised utilising a series of gold(I) acetylides. These complexes show interesting structural motifs in the solid state, since intramolecular aurophilic interactions lead to a parallel orientation of the isocyano moieties, combined with an antiparallel alignment of neighbouring units. The reaction of 1 with the gold(I) acetylide [Au(C≡C–Fc)]n turned out to be very unusual, since the two chemically equivalent isocyano groups undergo a different reaction. One group shows an ordinary coordination and the other one undergoes an extraordinary 1,1-insertion into the Au-C bond. As a sideline of the research of this thesis several ferrocene derivatives have been tested for their suitability for potential surface reactions. Copper(I) mediated 1,3-dipolar cycloadditions of azidoferrocene derivatives with terminal alkynes appeared very promising in this context, but failed to a certain extent in terms of ‘click’ chemistry, since the formation of the triazoles depended on the strict exclusion of oxygen and moisture and yields were only moderate. Staudinger reactions between dppf and azidoferrocene derivatives were also tested. The nucleophilic additions of secondary amines to 1,1’-diisothiocyanatoferrocene led to the respective thiourea derivatives in quantitative yields.

Neue redoxfunktionalisierte Schwefel-Tripodliganden für selbstassemblierende monomolekulare Filme auf Goldoberflächen

Für die Entwicklung selbstorganisierter Monoschichten (SAMs) auf Gold(111)-Oberflächen wurden neue, redox-funktionalisierte Schwefel-Tripodliganden synthetisiert. Um die tripodale Struktur zu realisieren, wurde Adamantan als vierbindiges Zentrum eingesetzt. Die Anbindung an die Goldoberfläche wurde durch Thioethereinheiten ermöglicht, eventuelle laterale Wechselwirkungen durch Alkylseitenketten an den Thioethereinheiten, sowie durch lineare, rigide Spacereinheiten wurden untersucht. Als redoxaktive, funktionelle Einheit wurde ein Ferrocenylrest an den Liganden eingeführt. Gebildete monomolekulare Filme der Liganden auf Gold wurden mit Hilfe von Röntgenphotoelektronenspektroskopie (XPS), Nahkanten-Reflexions-Röntgenabsorptionsspektroskopie (NEXAFS) und Sum-Frequency-Generation (SFG) charakterisiert, um die Filmqualität, die Bindung ans Substrat und Orientierungsordnung im Film zu ermitteln.