Sedimentology and Geochemistry of core sediments from the Ashtamudi estuary and the adjoining coastal plain,central Kerala,India

The evolution of coast through geological time scale is dependent on the transgression-regression event subsequent to the rise or fall of sea level. This event is accounted by investigation of the vertical sediment deposition patterns and their interrelationship for paleo-enviornmental reconstruction. Different methods like sedimentological (grain size and micro-morphological) and geochemical (elemental relationship) analyses as well as radiocarbon dating are generally used to decipher the sea level changes and paleoclimatic conditions of the Quaternary sediment sequence. For the Indian coast with a coastline length of about 7500 km, studies on geological and geomorphological signatures of sea level changes during the Quaternary were reported in general by researchers during the last two decades. However, for the southwest coast of India particularily Kerala which is famous for its coastal landforms comprising of estuaries, lagoons, backwaters, coastal plains, cliffs and barrier beaches, studies pertaining to the marine transgression-regression events in the southern region are limited. The Neendakara-Kayamkulam coastal stretch in central Kerala where the coast is manifested with shore parallel Kayamkulam Lagoon on one side and shore perpendicular Ashtamudi Estuary on the other side indicating existence of an uplifted prograded coastal margin followed by barrier beaches, backwater channels, ridge and runnel topography is an ideal site for studying such events. Hence the present study has been taken up in this context to address the gap area. The location for collection of core samples representing coastal plain, estuarylagoon and offshore regions have been identified based on published literature and available sedimentary records. The objectives of the research work are:  To study the lithological variations and depositional environments of sediment cores along the coastal plain, estuary-lagoon and offshore regions between Kollam and Kayamkulam in the central Kerala coast  To study the transportation and diagenetic history of sediments in the area  To investigate the geochemical characterization of sediments and to elucidate the source-sink relationship  To understand the marine transgression-regression events and to propose a conceptual model for the region The thesis comprises of 8 chapters. The first chapter embodies the preamble for the selection and significance of this research work. The study area is introduced with details on its physiographical, geological, geomorphological, rainfall and climate information. A review of literature, compiling the research on different aspects such as physico-chemical, geomorphological, tectonics, transgression-regression events are presented in the second chapter and they are broadly classified into three viz:- International, National and Kerala. The field data collection and laboratory analyses adopted in the research work are discussed in the third chapter. For collection of sediment core samples from the coastal plains, rotary drilling method was employed whereas for the estuary-lagoon and offshore locations the gravity/piston corer method was adopted. The collected subsurficial samples were analysed for texture, surface micro-texture, elemental analysis, XRD and radiocarbon dating techniques for age determination. The fourth chapter deals with the textural analysis of the core samples collected from various predefined locations of the study area. The result reveals that the Ashtamudi Estuary is composed of silty clay to clayey type of sediments whereas offshore cores are carpeted with silty clay to relict sand. Investigation of the source of sediments deposited in the coastal plain located on either side of the estuary indicates the dominance of terrigenous to marine origin in the southern region whereas it is predominantly of marine origin towards the north. Further the hydrodynamic conditions as well as the depositional enviornment of the sediment cores are elucidated based on statistical parameters that decipher the deposition pattern at various locations viz., coastal plain (open to closed basin), Ashtamudi Estuary (partially open to restricted estuary to closed basin) and offshore (open channel). The intensity of clay minerals is also discussed. From the results of radiocarbon dating the sediment depositional environments were deciphered.The results of the microtextural study of sediment samples (quartz grains) using Scanning Electron Microscope (SEM) are presented in the fifth chapter. These results throw light on the processes of transport and diagenetic history of the detrital sediments. Based on the lithological variations, selected quartz grains of different environments were also analysed. The study indicates that the southern coastal plain sediments were transported and deposited mechanically under fluvial environment followed by diagenesis under prolonged marine incursion. But in the case of the northern coastal plain, the sediments were transported and deposited under littoral environment indicating the dominance of marine incursion through mechanical as well as chemical processes. The quartz grains of the Ashtamudi Estuary indicate fluvial origin. The surface texture features of the offshore sediments suggest that the quartz grains are of littoral origin and represent the relict beach deposits. The geochemical characterisation of sediment cores based on geochemical classification, sediment maturity, palaeo-weathering and provenance in different environments are discussed in the sixth chapter. In the seventh chapter the integration of multiproxies data along with radiocarbon dates are presented and finally evolution and depositional history based on transgression–regression events is deciphered. The eighth chapter summarizes the major findings and conclusions of the study with recommendation for future work.

Desarrollo de un plan estratégico de logística para la empresa Aconquistar S.A.S.

El presente trabajo de grado surgió a partir de una investigación realizada semestres anteriores a la empresa ACONQUISTAR S.A.S., en donde se encontraron falencias logísticas relacionadas con el transporte de mercancías. Por consiguiente este trabajo es el resultado del análisis de la cadena de Abastecimiento y el acercamiento a la creación de un plan estratégico de logística Para dicha empresa. Para el desarrollo del trabajo se establecieron tres frentes de ejecución; la cadena de abastecimiento de la empresa, los operadores logísticos de transporte y los clientes, con el fin de obtener las bases necesaria para lograr trabajar en el diseño del plan estratégico de logística para la empresa. El cual, consistió en la aplicación del Modelo de Referencia de Operaciones para la Cadena de abastecimiento (SCOR).

Perfil de mercado de Corea del Sur

El proyecto Perfil de Mercado en Corea del Sur, es un material de apoyo que facilitará a los exportadores la toma de decisiones gracias a una descripción detallada de cada uno de los productos que registran dentro del ranking de los 50 más importados por Corea del Sur y posteriormente, los 25 más exportados desde Colombia hacia el país objeto de estudio. Este documento, expone el panorama del macro entorno de cada una de las provincias de Corea del Sur y analiza las generalidades, estadísticas y aspectos logísticos de los productos más importados por el país, teniendo en cuenta las actividades de transporte, distribución y almacenamiento para cada uno de ellos. Adicionalmente, se presentan estadísticas históricas desde el año 2008 que permiten conocer el valor de las importaciones por producto y los 25 principales países que proveen a Corea del Sur para cada uno, así como su participación frente al resto del mundo. Finalmente, se profundiza en las 25 posiciones arancelarias con mayores niveles de exportación colombiana hacia Corea del Sur como país de destino, especificando además de los datos ya expresados, sus principales competidores y los documentos o procedimientos requeridos para la exportación.

Plan exportador Ingenio Moda

El presente plan exportador se realizó para una microempresa del programa: Red de empresarios innovadores de la Alcaldía de Bogotá, en conjunto con Maloka. INGENIO MODA es una empresa de confecciones que lleva 5 años en el mercado. Actualmente se especializa en 3 líneas: 1. METALLIK: Ropa causal y formal para mujeres entre 15 y 30 años. Con facilidad de adaptación a cualquier ocasión de uso. 2. POP institucional: Uniformes institucionales, que tienen como objetivo resaltar la imagen corporativa de las empresas. 3. ASESORIA EN DISEÑO: Diseño externo para otras empresas y asesoría en presentación de colecciones. Para el presente trabajo se decidió trabajar sobre blusas de algodón de la línea METALLIK, con posición arancelaria: 611420. En la realización del plan exportador se trabajaron 5 fases: 1. INTELIGENCIA DE MERCADOS: Donde se analizaron los 5 países Latinoamericanos más factibles para introducirse en el mercado. Se analizaron varios aspectos económicos, culturales, facilidad de entrada, costo del país, competencia, entro otros dentro de la matriz de CIDEM (Universidad del Rosario), para escoger junto con el empresario los tres países mas convenientes para abarcar con el producto seleccionado. Para este plan exportador se escogieron: Costa Rica, Chile y México. 2. COSTOS INTERNOS: Esta fase tuvo como objetivo principal estudiar el costo de producción interna del producto seleccionado, para establecer políticas de ventas adecuadas y analizar la competitividad con las demás empresas con presencia en los países seleccionados. 3. PRECIO Y LOGISTICA INTERNACIONAL: Se trabajó sobre el precio del producto puesto en los países. Todos los aspectos necesarios a analizar para trasladar el producto al lugar escogido: Contratación de SIA, escogencia del seguro, del mejor modo de traslado (Naviero o Aire), condiciones de empaque para las condiciones del traslado y por ultimo, comparación de este precio final con los precios existentes en el mercado seleccionado. 4. ESTRATEGIAS COMERCIALES INTERNACIONALES: Después de haber analizado los aspectos técnicos de traslado y venta del producto, es necesario estudiar a los países escogidos en aspectos culturales, climáticos, geográficos, económicos, en fin, todos los aspectos relevantes para hacer al producto atractivo en el mercado a abarcar. De acuerdo con esto, se estructuraron las estrategias mas adecuadas para cada país, esto con el objetivo de garantizar la aceptación del producto. 5. PLAN EXPORTADOR: Por ultimo, teniendo en cuenta toda la información anterior, se realizó el plan exportador mas adecuado para Ingenio Moda. Que tiene como propósito ser una guía para que la empresa pueda abarcar el mercado exterior con éxito.

Caracterización de la exposición ocupacional a los gases, dióxido de azufre (so2), sulfuro de hidrógeno (h2s), y monóxido de carbono (co), y la percepción de salud de los trabajadores, en una empresa del sector hidrocarburo en Colombia

En el proceso de extracción de petróleo (crudo) deben realizarse tratamientos físicos y químicos en estaciones de recolección del hidrocarburo con el fin de garantizar su calidad antes de su entrega para el transporte y comercialización. Para la realización de esta actividad el personal operativo requerido (operadores) debe realizar diferentes actividades, tales como ronda operacional, verificación de sistemas de almacenamiento del crudo, agua residual del proceso e insumos químicos utilizados en su tratamiento y manipulación de facilidades en las estaciones de recolección, entre otras. Como resultados de las actividades rutinarias los operadores están expuestos a factores de riesgo químico asociados a gases y vapores orgánicos generados en los procesos de tratamiento del crudo. En el presente trabajo se realizaron mediciones de calidad de aire e higiene industrial en diferentes estaciones tratamiento de crudo, con el propósito de evaluar los niveles de exposición de los operadores a gases y vapores de hidrocarburos durante el proceso de tratamiento de crudo y dar respuesta a la siguiente pregunta: ¿existe relación entre la exposición ocupacional, las emisiones atmosféricas de gases (SO2, CO, H2S) y la percepción de afectación de la salud de los trabajadores que se encuentran expuestos durante la actividad laboral, en una empresa del sector de hidrocarburos? Se realizó un estudio de corte transversal, mediante la aplicación de cuestionarios sobre las condiciones de trabajo y de salud a 30 trabajadores que laboran en una estación de tratamiento de crudo de una compañía del sector de hidrocarburos. Los operadores objeto de estudio laboran en turnos rotativos, han estado vinculados con la compañía por más de dos años y tienen contrato directo, adicionalmente, se identificaron los factores de riesgos ambientales y ocupacionales para el grupo de trabajadores y se realizó una revisión de los informes de medición de higiene industrial y de calidad de aire de las estaciones donde labora el personal seleccionado con el fin de establecer si los resultados se relacionan. Los resultados obtenidos indican que el 100% de los trabajadores son de género masculino y se desempeñan en cargos de operadores, recorredores de pozos de crudo y supervisores. El 97% de los operadores tiene más de cuarenta años de edad y el 80% de los mismos ha laborado por más de 6 años en la compañía. Acerca de la percepción de los trabajadores sobre su estado de salud el 90% afirma que su salud es buena, el 97% respondió que no presenta problemas respiratorios, el 23% manifiesta que presenta trastornos dermatológicos y el 27% indican que presenta dolor de cabeza constante. De la revisión de los informes de calidad de aire disponibles se encontró que las mediciones de Dióxido de Azufre SO2, Monóxido de Carbono CO se encuentran dentro del rango definido como el de menor impacto para la salud humana. De los datos del informe se puede concluir que la calidad del aire es buena en el 100% de las áreas de influencia de las estaciones de tratamiento de crudo. Según los informes de higiene industrial el 34% de las instalaciones presenta concentraciones de Sulfuro de Hidrógeno (H2S) en el límite permisible para exposiciones crónicas en un promedio ponderado de tiempo (TLV-TWA) y el límite permisible para exposiciones agudas en un límite de exposición a corto plazo (TLV-STEL). Solo el 37% de los trabajadores objeto de este estudio percibe el riesgo por la exposición a factores de riesgo químicos y son claramente consientes que se encuentran expuestos a estos riesgos por la manipulación de productos químicos y exposición a sustancias químicas producto de sus actividades rutinarias, el 73% no percibe el riesgo de exposición por su actividad laboral. Se recomienda que la compañía fortalezca su esquema de vigilancia para generar alternativas que eleven los niveles de consciencia del riesgo del trabajador. Los factores de riesgo ambiental y ocupacional, de los gases y vapores generados se deben al proceso de tratamiento de crudo, están mutuamente relacionados dado que al generarse una emisión y/o escape no controlado como consecuencia se tiene una afectación directa al medio ambiente y a los trabajadores.

Fine sediment delivery and transfer in lowland catchments: modelling suspended sediment concentrations in response to hydrological forcing

Fine sediment delivery to and storage in stream channel reaches can disrupt aquatic habitats, impact river hydromorphology, and transfer adsorbed nutrients and pollutants from catchment slopes to the fluvial system. This paper presents a modelling toot for simulating the time-dependent response of the fine sediment system in catchments, using an integrated approach that incorporates both land phase and in-stream processes of sediment generation, storage and transfer. The performance of the model is demonstrated by applying it to simulate in-stream suspended sediment concentrations in two lowland catchments in southern England, the Enborne and the Lambourn, which exhibit contrasting hydrological and sediment responses due to differences in substrate permeability. The sediment model performs well in the Enborne catchment, where direct runoff events are frequent and peak suspended sediment concentrations can exceed 600 mg l(-1). The general trends in the in-stream concentrations in the Lambourn catchment are also reproduced by the model, although the observed concentrations are low (rarely exceeding 50 mg l(-1)) and the background variability in the concentrations is not fully characterized by the model. Direct runoff events are rare in this highly permeable catchment, resulting in a weak coupling between the sediment delivery system and the catchment hydrology. The generic performance of the model is also assessed using a generalized sensitivity analysis based on the parameter bounds identified in the catchment applications. Results indicate that the hydrological parameters contributing to the sediment response include those controlling (1) the partitioning of runoff between surface and soil zone flows and (2) the fractional loss of direct runoff volume prior to channel delivery. The principal sediment processes controlling model behaviour in the simulations are the transport capacity of direct runoff and the in-stream generation, storage and release of the fine sediment fraction. The in-stream processes appear to be important in maintaining the suspended sediment concentrations during low flows in the River Enborne and throughout much of the year in the River Lambourn. Copyright (c) 2007 John Wiley & Sons, Ltd.

The water quality of the LOCAR Pang and Lambourn catchments

The water quality of the Pang and Lambourn, tributaries of the River Thames, in south-eastern England, is described in relation to spatial and temporal dimensions. The river waters are supplied mainly from Chalk-fed aquifer sources and are, therefore, of a calcium-bicarbonate type. The major, minor and trace element chemistry of the rivers is controlled by a combination of atmospheric and pollutant inputs from agriculture and sewage sources superimposed on a background water quality signal linked to geological sources. Water quality does not vary greatly over time or space. However. in detail, there are differences in water quality between the Pang and Lambourn and between sites along the Pang and the Lambourn. These differences reflect hydrological processes, water flow pathways and water quality input fluxes. The Pangs pattern of water quality change is more variable than that of the Lambourn. The flow hydrograph also shows both a cyclical and 'uniform pattern' characteristic of aquifer drainage with, superimposed, a series of 'flashier' spiked responses characteristic of karstic systems. The Lambourn, in contrast, shows simpler features without the 'flashier' responses, The results are discussed in relation to the newly developed UK community programme LOCAR dealing with Lowland Catchment Research. A descriptive and box model structure is provided to describe the key features of water quality variations in relation to soil, unsaturated and groundwater flows and storage both away from and close to the river.

An assessment of the fine sediment dynamics in an upland river system: INCA-Sed modifications and implications for fisheries

There is a need for better links between hydrology and ecology, specifically between landscapes and riverscapes to understand how processes and factors controlling the transport and storage of environmental pollution have affected or will affect the freshwater biota. Here we show how the INCA modelling framework, specifically INCA-Sed (the Integrated Catchments model for Sediments) can be used to link sediment delivery from the landscape to sediment changes in-stream. INCA-Sed is a dynamic, process-based, daily time step model. The first complete description of the equations used in the INCA-Sed software (version 1.9.11) is presented. This is followed by an application of INCA-Sed made to the River Lugg (1077 km2) in Wales. Excess suspended sediment can negatively affect salmonid health. The Lugg has a large and potentially threatened population of both Atlantic salmon (Salmo salar) and Brown Trout (Salmo trutta). With the exception of the extreme sediment transport processes, the model satisfactorily simulated both the hydrology and the sediment dynamics in the catchment. Model results indicate that diffuse soil loss is the most important sediment generation process in the catchment. In the River Lugg, the mean annual Guideline Standard for suspended sediment concentration, proposed by UKTAG, of 25 mg l− 1 is only slightly exceeded during the simulation period (1995–2000), indicating only minimal effect on the Atlantic salmon population. However, the daily time step simulation of INCA-Sed also allows the investigation of the critical spawning period. It shows that the sediment may have a significant negative effect on the fish population in years with high sediment runoff. It is proposed that the fine settled particles probably do not affect the salmonid egg incubation process, though suspended particles may damage the gills of fish and make the area unfavourable for spawning if the conditions do not improve.

Importance of mycotoxins in food and feed in India

Various food and feed samples including groundnut seed, maize, sorghum, soyabean cake, groundnut cake, cotton cake, poultry feed, buffalo milk, cow milk and milk powders were collected from farmers' fields, farmer's stores, oil millers storage, traders' storage, retail shops and supermarkets. More than 2000 samples were analysed by ELISA and most of the commodities, with the exception of sorghum seed, contained high levels of aflatoxin. Groundnut cake was one of the major cattle feed ingredients in the peri-urban area of Hyderabad (Andhra Pradesh, India) and >75% of the samples contained >100 µg/kg aflatoxin, leading to a high level of aflatoxin M1, in milk samples. Strategies to reduce aflatoxin levels (especially in groundnut) by management interventions at preharvest, harvest and storage, are discussed.

Food for thought: the role of dietary flavonoids in enhancing human memory, learning and neuro-cognitive performance

Emerging evidence suggests that dietary-derived flavonoids have the potential to improve human memory and neuro-cognitive performance via their ability to protect vulnerable neurons, enhance existing neuronal function and stimulate neuronal regeneration. Long-term potentiation (LTP) is widely considered to be one of the major mechanisms underlying memory acquisition, consolidation and storage in the brain and is known to be controlled at the molecular level by the activation of a number of neuronal signalling pathways. These pathways include the phosphatidylinositol-3 kinase/protein kinase B/Akt (Akt), protein kinase C, protein kinase A, Ca-calmodulin kinase and mitogen-activated protein kinase pathways. Growing evidence suggests that flavonoids exert effects on LTP, and consequently memory and cognitive performance, through their interactions with these signalling pathways. Of particular interest is the ability of flavonoids to activate the extracellular signal-regulated kinase and the Akt signalling pathways leading to the activation of the cAMP-response element-binding protein, a transcription factor responsible for increasing the expression of a number of neurotrophins important in LTP and long-term memory. One such neurotrophin is brain-derived neurotrophic factor, which is known to be crucial in controlling synapse growth, in promoting an increase in dendritic spine density and in enhancing synaptic receptor density. The present review explores the potential of flavonoids and their metabolite forms to promote memory and learning through their interactions with neuronal signalling pathways pivotal in controlling LTP and memory in human subjects.

Antioxidant properties of kilned and roasted malts

Compounds possessing antioxidant activity play a crucial role in delaying or preventing lipid oxidation in foods and beverages during processing and storage. Such reactions lead to loss of product quality, especially as a consequence of off-flavor formation. The aim of this study was to determine the antioxidant activity of kilned (standard) and roasted (speciality) malts in relation to phenolic compounds, sugars, amino acids, and color [assessed as European Brewing Convention units (degrees EBC) and absorbance at 420 nm]. The concentrations of sugars and amino acids decreased with the intensity of the applied heat treatment, and this was attributed to the extent of the Maillard reaction, as well as sugar caramelization, in the highly roasted malts. Proline, followed by glutamine, was the most abundant free amino/imino acid in the malt samples, except those that were highly roasted, and maltose was the most abundant sugar in all malts. Levels of total phenolic compounds decreased with heat treatment. Catechin and ferulic acid were the most abundant phenolic compounds in the majority of the malts, and amounts were highest in the kilned samples. In highly roasted malts, degradation products of ferulic acid were identified. Antioxidant activity increased with the intensity of heating, in parallel with color formation, and was significantly higher for roasted malts compared to kilned malts. In kilned malts, phenolic compounds were the main identified contributors to antioxidant activity, with Maillard reaction products also playing a role. In roasted malts, Maillard reaction products were responsible for the majority of the antioxidant activity.

Critical stages of the brewing process for changes in antioxidant activity and levels of phenolic compounds in ale

Samples were taken at each stage of brewing (malt, milling, mashing, wort separation, hop addition, boiling, whirlpool, dilution, fermentation, warm rest, chill-lagering, beer filtration, carbonation and bottling, pasteurization, and storage). The level of antioxidant activity of unfractionated, low-molecular-mass (LMM) and high-molecular-mass (HMM) fractions was measured by the 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfortic acid) radical cation (ABTS(.+)) and ferric-reducing antioxidant power (FRAP) procedures. Polyphenol levels were assessed by HPLC. The LMM fraction (<5 kDa) was responsible for similar to80% of the level of antioxidant activity of the unfractionated malt and beer samples. In the unfractionated samples, significant decreases (P < 0.001) in antioxidant activity levels were observed after milling and beer filtration, with the decrease after beer filtration being accompanied by a significant decrease (P > 0.001) in catechin and ferulic acid levels. Increases in antioxidant activity levels were observed after mashing, boiling, fermentation, chill-lagering, and pasteurization, in line with previous studies on lager. Additionally, increases in the level of antioxidant activity occurred after wort separation and carbonation and bottling and were accompanied by increases in levels of most monitored polyphenols. Data from the ABTS(.-) and FRAP assays indicated that the compounds contributing to the levels of antioxidant activity responded differently in the two procedures. Levels of ferulic, vanillic, and chlorogenic acids and catechin accounted for 45-61% of the variation in antioxidant activity levels.

Potato glycoalkaloids: formation and strategies for mitigation

With the increasing production and consumption of potato and its products, glycoalkaloid (GA) formation and toxicity are likely to become an important focus for food safety researchers and public health agencies. Not only the presence of GA, particularly in the form of a-solanine and a-chaconine, but also the changes occurring as a result of various post-harvest handling practices and storage, are critical issues influencing the quality of stored potatoes. Studies on various factors (pre-harvest, during harvest anal post-harvest) affecting GA have been carried out from time to time, but it is difficult to compare the results of one study with another due to wide variation in the parameters chosen. This review aims to develop a clear understanding of these issues. Published information on the types of GA, their effects on health, their typical concentrations in potatoes, their formation mechanisms, and how their levels can be controlled by following appropriate post harvest practices and storage regimes are critically analysed. The levels of GA in potato can be controlled effectively by adopting appropriate post-harvest practices. Further studies are necessary, however, to investigate best practices, which either check completely or retard substantially their formation. (C) 2008 Society of Chemical Industry.

Vitamin E supplementation, cereal feed type and consumer sensory perceptions of poultry meat quality

Lipid oxidation leads to meat spoilage and has been reported to cause adverse changes in the flavour and texture of poultry meat. Vitamin E has been found to be effective in delaying lipid oxidation. The aim of this study was to determine whether the vitamin E supplementation of chicken feed influences the consumers' perception of the quality of chicken meat under normal display and storage conditions. Untrained consumers (n 32) evaluated cooked breast meat from chickens (both corn fed and wheat fed) supplemented with 75 250 or 500 mg/kg vitamin E and after storage at 4&DEG; C for 4 and 7 d. Factorial analysis found an interaction between vitamin E treatment and storage day upon the perceived juiciness (P = 0.023) and tenderness (P = 0.041) of the chicken meat. Perceptions of quality relative to vitamin E level were more evident on day 4 than day 7. When the two cereal types were compared, the time-related subgroup effects were observed only in meat from corn-fed chickens supplemented with either 75 or 250 mg/kg, which was perceived to be juicier (P = 0.018) and more tender (P = 0.020) than that supplemented at the 500 mg/kg level. These results imply that the two lower concentrations of vitamin E have some advantages over 500 mg/kg, but for optimal consumer acceptance of corn-fed chicken meat, we suggest that 250 mg/kg vitamin E should be added to corn-fed poultry feed. There was no evidence to suggest any advantages in changing the current amount of vitamin E (75 mg/kg) used to rear wheat-fed birds.

Omega-3 polyunsaturated fatty acids and human health outcomes

Current intakes of very long chain omega-3 fatty acids, eicosapentaenoic acid (EPA), and docosahexaenoic acid (DNA) are low in most individuals living in Western countries. A good natural source of these fatty acids is seafood, especially oily fish. Fish oil capsules contain these fatty acids too. Very long chain w-3 fatty acids are readily incorporated from capsules into transport, functional, and storage pools. This incorporation is dose-dependent and follows a kinetic pattern that is characteristic for each pool. At sufficient levels of incorporation, EPA and DHA influence the physical nature of cell membranes and membrane protein-mediated responses, eicosanoid generation, cell signaling and gene expression in many different cell types. Through these mechanisms, EPA and DHA influence cell and tissue physiology, and the way cells and tissues respond to external signals. In most cases, the effects seen are compatible with improvements in disease biomarker profiles or in health-related outcomes. As a result, very long chain omega-3 fatty acids play a role in achieving optimal health and in protection against disease. Long chain omega-3 fatty acids protect against cardiovascular morbidity and mortality, and might be beneficial in rheumatoid arthritis, inflammatory bowel diseases, childhood learning, and behavior, and adult psychiatric and neurodegenerative illnesses. DHA has an important structural role in the eye and brain, and its supply early in life is known to be of vital importance. On the basis of the recognized health improvements brought about by long chain omega-3 fatty acids, recommendations have been made to increase their intake. (C) 2009 International Union of Biochemistry and Molecular Biology, Inc. Volume 35, Number 3, May/June 2009, Pages 266-272. E-mail: pcc@soton.ac.uk