Pressforming of a tray from a pulp sheet

The aim of this thesis work was to verify the possibility to produce tray packages directly from pulp sheets using press forming techniques. The different existing raw materials of pulp, various sources of molded pulp and different methods of production of molded pulp were studied. Nine different raw materials which were used for experimental work were provided by Stora Enso mills, and Stora Enso Research Centre, Imatra, Finland. The laboratory tests were carried out using LUT Adjustable packaging line at Lappeenranta University of Technology. The results prove that long virgin fibres of pine pulp seems to have better formability with high moisture content compared to others. No significant improvements were noticed with conditioned samples, never the less far studies has to be done to find optimal conditions for production. The results indicated the possibility for making pressformed tray from two different pulp qualities (Sunila pulp and Enopine). The method could prove to be beneficiary as the production line could be shortened and investment in board machines could be avoided if the trays were pressed directly from pulp sheets. Also the labour costs would be reduced. However, there is much work to be done before the quality of a tray produced out of a pulp sheet is comparable to a tray produced out of tray board.

Tuotantokoneiden pitoajat meijerialan yrityksessä

Diplomityön tavoitteena on tutkia, millaisia ovat Valion tuoretuotemeijerien tuotantokoneiden toteutuneet pitoajat suhteessa kirjanpidon pitoaikaan ja mikä pitoaikoihin eniten vaikuttaa. Tuotantokoneiksi luetaan tässä tutkimuksessa valmistus- ja pakkauskoneet sekä pakkauskoneiden jälkikäsittelylaitteet. Tavoitteena on selvittää myös eroja eri laiteryhmien ja meijerien välillä, ja mitkä syyt aiheuttavat nämä erilaiset pitoajat. Tutkimus toteutettiin sekä haastattelututkimuksena että taseeseen ja erillisiin konetietoihin tutustumalla. Tärkeimpinä käytettävinä teorioina on hyödynnetty erilaisten pitoaikojen määritelmiä sekä koneiden korvausmalleja sekä muita tutkimuksia pitoajoista. Vanhimmat valmistuskoneet olivat Tampereella ja uusimmat Jyväskylässä. Pakkauskoneista vanhimmat ovat Riihimäellä ja uusimmat vastaavasti Jyväskylässä sekä Tampereella. Jälkikäsittelylaitteista vanhimmat laitteet olivat Tampereella ja uusimmat Riihimäellä. Kokonaisuudessaan laitoksista nuorin on Jyväskylän meijeri, mihin merkittävin syy on koko prosessin uusiminen vuonna 2003. Tutkimuksessa kokonaispitoaika tuotantokoneille oli 10,8 vuotta. Yleisimpiä syitä jonkin laitteen vaihtamiseen meijereillä olivat pelko hygienian riittämättömyydestä, laitteen huonontunut kunto ja varaosien huono saatavuus. Tutkittujen Valion laitoksien tuotantokoneet ovat hyvin samanikäisiä verrattuna muiden tutkimuksien tuloksiin. Jatkossa Valion kannattaisi kehittää pitoaikojen seurantaa ja vuosittaisia tarkastuksia meijereillä.

Conical aluminum can

The current beverage (cylindrical shape) cans are stacked on each other after production, thus consuming a lot of space. Indirectly, this could result to high carbon emission during transportation. The problem is how to minimize the carbon emission based on different contradicting viewpoints. It was suggested that a conical shape of "the beverage can" could be a solution for the space optimization of empty beverage can transportation, thus creating the title for this research “Conical aluminum can”. They would be stacked inside each other before filling. This was based on design for sustainability and the consumer perspective and willingness toward sustainability. However, it was noticed that the industry is unwilling to incorporate this change.

Paperi- ja selluteollisuus: Kestävän kehityksen rooli alalla ja alan tulevaisuus: Delfoi-tutkimus

Tutkimuksen tavoitteena oli hahmottaa paperi- ja selluteollisuuden nykytilaa ja tulevaisuutta kirjallisuuden sekä empiirisen tutkimuksen avulla. Tutkimuksen avulla hahmotettiin erityisesti kestävän kehityksen ja CSR:n merkitystä paperi- ja selluteollisuudessa, paperi- ja selluteollisuuden tämänhetkistä tilannetta sekä kilpailuedun lähteitä ja liiketoiminnan mahdollisuuksia alalla tulevaisuudessa. Tutkimuksen tutkimusmenetelmä oli kvalitatiivinen ja tutkimusmenetelmänä käytettiin Delfoi-menetelmää. Tutkimuksen perusteella voidaan todeta, että kestävä kehitys on tärkeä aihe paperi- ja selluteollisuudessa ja sen voidaan olettaa tulevaisuudessa olevan alalla vieläkin merkityksellisempi. Ympäristöllisistä tekijöistä ja näkökulmista on metsäteollisuudessa puhuttu jo vuosikymmenten ajan ja alan kansainvälistyminen sekä alalla viime aikoina tapahtuneet muutokset ovat nostaneet kiinnostusta kestävää kehitystä kohtaan entisestään. Tutkimuksen mukaan paperi- ja selluteollisuuden nykytilanne on tällä hetkellä haastava ja kilpailu alalla on kovaa. Syitä alan haastavaan tilanteeseen ovat alalla viime aikoina tapahtuneet muutokset ja kilpailun kiristyminen. Tulevaisuuden kilpailuedun lähteinä alalla voidaan nähdä muun muassa kestävään kehitykseen liittyvät tekijät, uudet tuotteet sekä materiaalit, markkinarakojen hyödyntäminen sekä kannattavuuden parantaminen. Uusia liiketoiminnan mahdollisuuksia alalla tulevaisuudessa ovat erikoistuotteet, bioenergia, innovaatiot, sivutuotteiden käyttö, kierrätettävät materiaalit, pakkausmateriaalit sekä biotalous.

Possibility Of Controlling The Atmosphere Inside A Package Using Microperforation

This work focuses on the study of the determination on the possibilities of controlling the required moisture within the inside of film sealed packages. The task is based on the challenges faced by fresh food producers in actualizing a longer product shelf-life coupled with the growing complex desires coming from consumers in the aspect of quality. One way to realize this is by proper evaluation on the use of the flexible plastic films through permeation measurements on the required amount of moisture penetrating through the plastic film with the application of microperforation. A packaging material requires proper interaction on moisture transmission, between the product and the outside environment. The plastic film material that stands between, fresh fruits, vegetables and the outside environment could have appropriate respiration rates through possible micro holes. This work simulates similar process with the aid of water vapor transmission rate (WVTR) experiment using anhydrous CaCl2 as the desiccant, in studying the WVTR values of various perforated film materials at different conditions of storage (standard, fridge, and tropical conditions). However, the results showed absorption rates of water vapor at various conditions in grams of H2O/m2/24h.

The importance of package design to Japanese consumers: The role of visual and informational elements of package design in decision making

The importance of package design as a marketing tool is growing as the competition in retail environment increases. However, there is a lack of studies on how each element of package design affects consumer decisions in different countries. The objective of this thesis is to study the role of package design to Japanese consumers. The research was conducted through an experiment with a sample of 37 Japanese female participants. They were divided into two groups and were given different tasks: one group had to choose a chocolate for themselves, and the other for a group of friends. The participants were presented with 15 different Finnish chocolate boxes to choose from. The qualitative data was gathered through observation and semi-structured interviews. In addition, data from questionnaires was quantified and all the data was triangulated. The empirical results suggest that visual elements strongly affect the decision making of Japanese consumers. Image was the most important element which acted as both, a visual and an informational aspect in the experiment. Informational elements on the other hand have little effect, especially when the context is written in a foreign language. However, informational elements affected participants who were choosing chocolates for a group of friends. A unique finding was the importance of kawaii (cuteness) to Japanese consumers.

Kartongin fysikaalisten ominaisuuksien vaikutus muovautuvuuteen

Työn tavoitteena oli kehittää menetelmä, jolla voitaisiin arvioida veto-ominaisuuksien avulla konvertointikoneen prässäysnopeuden ja muottien lämpötilan vaikutuksia kartongin muovautuvuuteen. Kirjallisuusosassa käsiteltiin kartongin muovautuvuuteen vaikuttavia ominaisuuksia sekä vetolujuuteen vaikuttavia tekijöitä. Lisäksi käsiteltiin kosteuden vaikutusta muovautuvuuteen sekä esiteltiin vuokakonvertointiprosessin periaate ja muovin sekä kartongin käyttäytymisen erot konvertointiprosessissa. Kokeellinen osa jakaantui kolmeen osaan. Esikokeissa tutkittiin laboratoriomittauksilla vetonopeuden ja kosteuden muutosten vaikutusta erilaisten kaupallisten kartonkimateriaalien vetolujuuteen ja murtovenymään. Tulosten perusteella valittiin prässäysnopeudet ja kosteustaso 2D- testauslaitteella suoritettuihin esi-pilot-mittakaavan kokeisiin sekä varsinaiseen pilot-koeajoon. Pilot-koeajossa pyrittiin arvioimaan prässäysnopeuden ja muottien lämpötilan vaikutuksia muovautuvuuteen vetolujuusarvojen avulla. Prässäysnopeudella ja vetolujuuslaitteen nopeudella ei havaittu yhteneväisyyksiä, jotta voitaisiin arvioida kartongin muovautuvuutta. Muovautuvuutta voidaan kuitenkin arvioida epäonnistuneisuusluvulla, jonka laskentapa kehitettiin työn aikana. Epäonnistuneisuusluku kuvaa hyvin kartongin muovautuvuutta ja on menetelmänä helppo, mutta sen heikkoutena on repeämien mittaamisen aiheuttama epätarkkuus. Esikokeissa havaittiin myös muovipäällysteiden veto-ominaisuuksien vastaavan kartongin ominaisuuksia 65 %:n suhteellisessa kosteudessa, jonka valittiin siten olevan optimaalinen olosuhde pilot-mittakaavan koeajoihin.

The influence of the broccoli (Brassica oleracea var. itálica)fill weigth on postharvest quality

Broccoli is a vegetable of important economic value as well as a source of vitamin C and anticarcinogenic property substances. Although it can be minimally processed, this vegetable presents fast senescence, characterized by yellowing, loss of turgescence, development of off-odors, increase in enzymatic activity and reduction of nutritional value. Among the frequently used techniques that can extend the shelf-life of minimally processed broccoli, we have the use of cool storage and modified atmosphere packaging (MAP). Several factors interfere in the efficiency of MAP, influencing the speed and intensity of the changes on atmosphere composition. This work aimed to study the influence of the amount packaged broccoli on its postharvest quality, when stored at 1ºC. Results demonstrated strong influence of the use of MAP compared to control treatment. It was observed that for all packaged treatments there was better vitamin C retention, lower loss of weight, lower peroxidase activity and better turgidity score of broccoli. This study demonstrated that the treatments with higher amounts of product showed the worst performance on vitamin C and aroma evaluation. The peroxidase activity was also influenced, and the best results were found in the treatment with higher amounts, which presented lowest values. However there is a tendency of increase in the activity along the time, especially at the end of the experiment. It was not detected the influence of the fill weight about color evaluation.

Shelf life of minimally processed carrot and green pepper

The postharvest losses of horticultural products justify the use of preservation techniques. The processing not only adds value to the products, but also makes the products more convenient to the consumers. The objective of this research was to define the methodologies for the minimal processing of carrot and green pepper as to the type and intensity of the adoption of conservation techniques, and to monitor the products after processing through microbiological, physicochemical and nutritional analysis. The vegetables were washed and they were immersed in cold (7ºC) water with 100 mg L-1 free chlorine for sanitation, followed by centrifugation for 5 min. The product was put into BOPP/LDPE (biaxially orientated polypropylene/low-density polyethylene) plastic bags, which were sealed under atmospheric air, vacuum and modified atmosphere (2% O2, 10% CO2, 88% N2) and stored at 1ºC±1ºC. The approximate composition of the vegetables stayed stable during the storage period, in the three tested treatments. The contents of vitamin C for the samples of minimally processed carrot and green pepper did not present differences among treatments. The contents of beta-carotene decreased slightly during the storage period for the minimally processed carrot and green pepper. After processing, carrot and green pepper had psychrotrophic counts of 10²-10(5) and 10³-10(6) CFU g-1, respectively. Anaerobic mesophiles and total coliforms were found in green peppers, representing 1.6x10³ - 7.4x10(5) and <10.g-1 - 7.4x10(5), respectively. Total and fecal coliforms, anaerobic mesophiles and Salmonella were not found in carrots. Salmonella was not found in green pepper.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

The Brazilian consumer's understanding and perceptions of organic vegetables: a Focus Group approach

Focus Group is a tool which generates, through interview sessions with a small number of participants, preliminary data to be used in subsequent quantitative stages. Many consumer studies use qualitative research with the aim of obtaining information and opinions on a specific product or situation. The objective of the present study was to obtain knowledge on the opinion, understanding and perception of the Brazilian consumer with respect to vegetables, focusing on organic products, using Focus Group Sessions. Four Focus Group Sessions were held with men and women in different environments, following a previously elaborated interview guide. In this study, it was observed that the consumers demonstrated being interested in having a healthy diet, based on fruit, vegetables and natural products. However, only a few declared consuming organic foods. Some participants did not know what the term organic meant, and most of them think that organic products are still very expensive, are not easily available in the supermarkets, do not have a good appearance, mainly in terms of size and packaging, and their certification is not always trustworthy. Almost all participants stated that they read package labels and among the items most observed were best-before date, nutritional information, production system and price. This study has identified important vegetable attributes perceived by the consumer, favouring the planning of a subsequent quantitative research. The results suggest that more information on the benefits of organic agriculture has to be passed on to consumers in order to contribute to a higher consumption of such products.

Influence of secondary packing on the freezing time of chiken meat in air blast freezing tunnels

Freezing of poultry cuts in continuous convective air blast tunnels is normally performed with the products protected by Low Density Polyethylene (LDPE) as a primary packaging and using Corrugated Cardboard Boxes (CCB) as secondary packaging. The objective of this work was to investigate the influence of these secondary packaging on the freezing of poultry cuts in continuous convective air blast tunnels. The study was performed by replacing CCB with Perforated Metal Boxes (PMB) in order to remove the packaging thermal resistance. The assays, performed in a industrial plant, demonstrated that CCB used commercially for meat freezing have a high heat transfer resistance. Their replacement with PMB can lead to shorter freezing times and spatially homogeneous freezing. Reductions of up to 45% in the freezing times were observed using PMB. The plateau of the temperature curve, related to the freezing time of free water, was significantly reduced using PMB, which is accepted to lead to better product quality after thawing. As the products were protected by the LDPE films as primary packaging, their appearance were not affected. The results presented in this work indicate that replacing CBB with PMB can be an excellent alternative to reduce freezing time and improve freezing homogeneity in industrial air blast tunnels, which could also be applied to other products.

Moisture adsorption characteristics of ginger slices

The moisture adsorption characteristics of dried ginger slices was studied to determine the effect of storage conditions on moisture adsorption for the purpose of shelf life prediction, selection of appropriate packaging materials, evaluate the goodness-of-fit of sorption models, and determine the thermodynamics of moisture adsorption for application in drying. There was a highly significant effect (p < 0.05) of water activity (a w), temperature, and pre-treatment on the equilibrium moisture content (EMC) of the dried ginger slices. At constant a w, the EMC decreased as temperature increased. The EMC of all samples increased as the a w increased at constant temperature. The sorbed moisture of the unpeeled ginger slices was higher than the peeled while those of unblanched samples were higher than the blanched. Henderson equation allows more accurate predictions about the isotherms with the lowest %RMS, and therefore, it describes best the adsorption data followed by GAB, Oswin, and Halsey models in that order. The monolayer moisture generally decreased with temperature for all samples. The isosteric heat decreased with moisture content approaching the asymptotic value or the latent heat of vaporization of pure water (∆Hst = 0) while the entropy of sorption was observed to increase with moisture content.

Quality of minimally processed guava with different types of cut, sanification and packing

The purpose of this project was to evaluate the sanitization effect on the quality of minimally processed guava. Initially, research was carried out with consumers in a supermarket to verify preferences of packaging for guava. Following this, the guava cv. Paluma underwent two sanitization sequences using dehydrated sodium dichloroisocyanurate compound, in 50 ppm concentration, sanitization prior to (S1) and after (S2) being cut; removal of excess water; conditioning in PET packaging and PSPVC and storage at 3 ºC ± 1 ºC. Physicochemical analysis - [pH, total soluble solids (SST), total labeled acidity (ATT), ascorbic acid (AA), total sugars (AT) and reducers (AR)], textural sensorial and microbiological analyses were used to monitor the quality of the products. The consumers preferred the guava cut in halves with pulp and packed in PET, although this packaging promoted condensation of water vapor on the inner surface of the lid, compromising the appearance of the product. The two sanitization sequences and the two kinds of packaging did not significantly affect the pH, SST, ATT, SST/ATT, texture and AA values. The AT and AR tenors increased significantly in the MP guavas stored in the PSPVC package. Both sanitizations were efficient in the bacterial control of the indicators of the hygienicsanitary conditions, although the S1 sanitization proved to be more efficient in the control of autochthonous aerobic microbiota (aerobic mesophylic microorganisms). It can be concluded that guava cv. Paluma packed in PSPVC can be conserved for 6 days when stored at 3 ºC.

Using Computational Fluid-Dynamics (CFD) for the evaluation of beer pasteurization: effect of orientation of cans

In-package pasteurization is the most used method for beer microbiological stabilization. The search for safer and better quality food has created a need to better understand the processes involved in producing it. However, little is known about the temperature and velocity profiles during the thermal processes of liquid foods in commercial packaging, which results in over-dimensioned processes to guarantee safety, decreasing the sensorial and nutritional characteristics of the product and increasing process costs. Simulations using Computational Fluid-Dynamics (CFD) have been used by various authors to evaluate those processes. The objective of the present paper was to evaluate the effect of packaging orientation in the pasteurization of beer in a commercial aluminum can using CFD. A heating process was simulated at 60 ºC up to 15 PUs (a conventional beer process, in which 1 Pasteurization Unit (PU) is equivalent to 1minute at 60 ºC). The temperature profile and convection current velocity along the process and the variation of the PUs were evaluated in relation to time considering the cans in the conventional, inverted, and horizontal positions. The temperature and velocity profiles were similar to those presented in the literature. The package position did not result in process improvement.