Delirium in the elderly: Current problems with increasing geriatric age.

Delirium is an acute disorder of attention and cognition seen relatively commonly in people aged 65 yr or older. The prevalence is estimated to be between 11 and 42 per cent for elderly patients on medical wards. The prevalence is also high in nursing homes and long term care (LTC) facilities. The consequences of delirium could be significant such as an increase in mortality in the hospital, long-term cognitive decline, loss of autonomy and increased risk to be institutionalized. Despite being a common condition, it remains under-recognised, poorly understood and not adequately managed. Advanced age and dementia are the most important risk factors. Pain, dehydration, infections, stroke and metabolic disturbances, and surgery are the most common triggering factors. Delirium is preventable in a large proportion of cases and therefore, it is also important from a public health perspective for interventions to reduce further complications and the substantial costs associated with these. Since the aetiology is, in most cases, multfactorial, it is important to consider a multi-component approach to management, both pharmacological and non-pharmacological. Detection and treatment of triggering causes must have high priority in case of delirium. The aim of this review is to highlight the importance of delirium in the elderly population, given the increasing numbers of ageing people as well as increasing geriatric age.

Accelerated Microstructure Imaging via Convex Optimisation for regions with multiple fibres (AMICOx)

This paper reviews and extends our previous work to enable fast axonal diameter mapping from diffusion MRI data in the presence of multiple fibre populations within a voxel. Most of the existing mi-crostructure imaging techniques use non-linear algorithms to fit their data models and consequently, they are computationally expensive and usually slow. Moreover, most of them assume a single axon orientation while numerous regions of the brain actually present more complex configurations, e.g. fiber crossing. We present a flexible framework, based on convex optimisation, that enables fast and accurate reconstructions of the microstructure organisation, not limited to areas where the white matter is coherently oriented. We show through numerical simulations the ability of our method to correctly estimate the microstructure features (mean axon diameter and intra-cellular volume fraction) in crossing regions.

Latent Class Analysis of Gambling Activities in a Sample of Young Swiss Men : Association with Gambling Problems, Substance Use Outcomes, Personality Traits and Coping Strategies.

The study aimed to identify different patterns of gambling activities (PGAs) and to investigate how PGAs differed in gambling problems, substance use outcomes, personality traits and coping strategies. A representative sample of 4989 young Swiss males completed a questionnaire assessing seven distinct gambling activities, gambling problems, substance use outcomes, personality traits and coping strategies. PGAs were identified using latent class analysis (LCA). Differences between PGAs in gambling and substance use outcomes, personality traits and coping strategies were tested. LCA identified six different PGAs. With regard to gambling and substance use outcomes, the three most problematic PGAs were extensive gamblers, followed by private gamblers, and electronic lottery and casino gamblers, respectively. By contrast, the three least detrimental PGAs were rare or non-gamblers, lottery only gamblers and casino gamblers. With regard to personality traits, compared with rare or non-gamblers, private and casino gamblers reported higher levels of sensation seeking. Electronic lottery and casino gamblers, private gamblers and extensive gamblers had higher levels of aggression-hostility. Extensive and casino gamblers reported higher levels of sociability, whereas casino gamblers reported lower levels of anxiety-neuroticism. Extensive gamblers used more maladaptive and less adaptive coping strategies than other groups. Results suggest that gambling is not a homogeneous activity since different types of gamblers exist according to the PGA they are engaged in. Extensive gamblers, electronic and casino gamblers and private gamblers may have the most problematic PGAs. Personality traits and coping skills may predispose individuals to PGAs associated with more or less negative outcomes.

The First International Workshop on Warning Criteria for Active Slides: technical issues, problems and solutions for managing early warning systems

Early warning systems (EWSs) rely on the capacity to forecast a dangerous event with a certain amount of advance by defining warning criteria on which the safety of the population will depend. Monitoring of landslides is facilitated by new technologies, decreasing prices and easier data processing. At the same time, predicting the onset of a rapid failure or the sudden transition from slow to rapid failure and subsequent collapse, and its consequences is challenging for scientists that must deal with uncertainties and have limited tools to do so. Furthermore, EWS and warning criteria are becoming more and more a subject of concern between technical experts, researchers, stakeholders and decision makers responsible for the activation, enforcement and approval of civil protection actions. EWSs imply also a sharing of responsibilities which is often averted by technical staff, managers of technical offices and governing institutions. We organized the First International Workshop on Warning Criteria for Active Slides (IWWCAS) to promote sharing and networking among members from specialized institutions and relevant experts of EWS. In this paper, we summarize the event to stimulate discussion and collaboration between organizations dealing with the complex task of managing hazard and risk related to active slides.

Optimisation d'une approche pour l'analyse de l'expression de gènes au niveau unicellulaire chez des sous-populations spécialisées de lymphocytes T CD4+ humaines

Chez les patients cancéreux, les cellules malignes sont souvent reconnues et détruites par les cellules T cytotoxiques du patient. C'est pourquoi, depuis plusieurs années, des recherches visent à produire des vaccins sensibilisant les cellules de l'immunité adaptative, afin de prévenir certains cancers. Bien que les vaccins ciblant les cellules T CD8+ (cytotoxiques) ont une efficacité in-vitro élevée, un vaccin pouvant cibler les cellules T CD8+ et CD4+ aurait une plus grande efficacité (1-3). En effet, les cellules T helper (CD4+) favorisent la production et la maintenance des cellules T CD8+ mémoires à longue durée de vie. Il existe un grand nombre de sous-types de cellules T CD4+ et leur action envers les cellules cancéreuses est différente. Par exemple, les lymphocytes Treg ont une activité pro-tumorale importante (4) et les lymphocytes Th1 ont une activité anti-tumorale (5). Cependant, le taux naturel des différents sous-types de cellules T CD4+ spécifiques aux antigènes tumoraux est variable. De plus, une certaine flexibilité des différents sous-types de cellules T CD4+ a été récemment démontrée (6). Celle-ci pourrait être ciblée par des protocoles de vaccination avec des antigènes tumoraux administrés conjointement à des adjuvants définis. Pour cela, il faut approfondir les connaissances sur le rôle des cellules T CD4+ spécifiques aux antigènes dans l'immunité anti-tumorale et connaître précisément la proportion des sous-types de cellules T CD4+ activées avant et après la vaccination. L'analyse des cellules T, par la cytométrie de flux, est très souvent limité par le besoin d'un nombre très élevé de cellules pour l'analyse de l'expression protéique. Or dans l'analyse des cellules T CD4+ spécifiques aux antigènes tumoraux cette technique n'est souvent pas applicable, car ces cellules sont présentes en très faible quantité dans le sang et dans les tissus tumoraux. C'est pourquoi, une approche basée sur l'analyse de la cellule T individuelle a été mise en place afin d'étudier l'expression du profil génétique des cellules T CD8+ et CD4+. (7,8) Méthode : Ce nouveau protocole (« single cell ») a été élaboré à partir d'une modification du protocole PCR-RT, qui permet la détection spécifique de l'ADN complémentaire (ADNc) après la transcription globale de l'ARN messager (ARNm) exprimé par une cellule T individuelle. Dans ce travail, nous optimisons cette nouvelle technique d'analyse pour les cellules T CD4+, en sélectionnant les meilleures amorces. Tout d'abord, des clones à profils fonctionnels connus sont générés par cytométrie de flux à partir de cellules T CD4+ d'un donneur sain. Pour cette étape d'optimisation des amorces, la spécificité des cellules T CD4+ n'est pas prise en considération. Il est, donc, possible d'étudier et de trier ces clones par cytométrie de flux. Ensuite, grâce au protocole « single cell », nous testons par PCR les amorces des différents facteurs spécifiques de chaque sous-type des T CD4+ sur des aliquotes issus d'une cellule provenant des clones générés. Nous sélectionnons les amorces dont la sensibilité, la spécificité ainsi que les valeurs prédictives positives et négatives des tests sont les meilleures. (9) Conclusion : Durant ce travail nous avons généré de l'ADNc de cellules T individuelles et sélectionné douze paires d'amorces pour l'identification des sous-types de cellules T CD4+ par la technique d'analyse PCR « single cell ». Les facteurs spécifiques aux cellules Th2 : IL-4, IL-5, IL-13, CRTh2, GATA3 ; les facteurs spécifiques aux cellules Th1 : TNFα, IL-2 ; les facteurs spécifiques aux cellules Treg : FOXP3, IL-2RA ; les facteurs spécifiques aux cellules Th17 : RORC, CCR6 et un facteur spécifique aux cellules naïves : CCR7. Ces amorces peuvent être utilisées dans le futur en combinaison avec des cellules antigènes-spécifiques triées par marquage des multimères pMHCII. Cette méthode permettra de comprendre le rôle ainsi que l'amplitude et la diversité fonctionnelle de la réponse de la cellule T CD4+ antigène-spécifique dans les cancers et dans d'autres maladies. Cela afin d'affiner les recherches en immunothérapie oncologique. (8)

The Pursuit of Efficient Copyright Licensing : How Some Rights Reserved Attempts to Solve the Problems of All Rights Reserved

This dissertation analyses the growing pool of copyrighted works, which are offered to the public using Creative Commons licensing. The study consist of analysis of the novel licensing system, the licensors, and the changes of the "all rights reserved" —paradigm of copyright law. Copyright law reserves all rights to the creator until seventy years have passed since her demise. Many claim that this endangers communal interests. Quite often the creators are willing to release some rights. This, however, is very difficult to do and needs help of specialized lawyers. The study finds that the innovative Creative Commons licensing scheme is well suited for low value - high volume licensing. It helps to reduce transaction costs on several le¬vels. However, CC licensing is not a "silver bullet". Privacy, moral rights, the problems of license interpretation and license compatibility with other open licenses and collecting societies remain unsolved. The study consists of seven chapters. The first chapter introduces the research topic and research questions. The second and third chapters inspect the Creative Commons licensing scheme's technical, economic and legal aspects. The fourth and fifth chapters examine the incentives of the licensors who use open licenses and describe certain open business models. The sixth chapter studies the role of collecting societies and whether two institutions, Creative Commons and collecting societies can coexist. The final chapter summarizes the findings. The dissertation contributes to the existing literature in several ways. There is a wide range of prior research on open source licensing. However, there is an urgent need for an extensive study of the Creative Commons licensing and its actual and potential impact on the creative ecosystem.

Rationing problems with payoff thresholds

An extension of the standard rationing model is introduced. Agents are not only identi fied by their respective claims over some amount of a scarce resource, but also by some payoff thresholds. These thresholds introduce exogenous differences among agents (full or partial priority, past allocations, past debts, ...) that may influence the final distribution. Within this framework we provide generalizations of the constrained equal awards rule and the constrained equal losses rule. We show that these generalized rules are dual from each other. We characterize the generalization of the equal awards rule by using the properties of consistency, path-independence and compensated exemption. Finally, we use the duality between rules to characterize the generalization of the equal losses solution.

Approximation to the theory of affinities to manage the problems of the groupping process

New economic and enterprise needs have increased the interest and utility of the methods of the grouping process based on the theory of uncertainty. A fuzzy grouping (clustering) process is a key phase of knowledge acquisition and reduction complexity regarding different groups of objects. Here, we considered some elements of the theory of affinities and uncertain pretopology that form a significant support tool for a fuzzy clustering process. A Galois lattice is introduced in order to provide a clearer vision of the results. We made an homogeneous grouping process of the economic regions of Russian Federation and Ukraine. The obtained results gave us a large panorama of a regional economic situation of two countries as well as the key guidelines for the decision-making. The mathematical method is very sensible to any changes the regional economy can have. We gave an alternative method of the grouping process under uncertainty.

Некоторые наблюдения по поводу построения компьютерного морфологического анализатора марийского языка. [Problems in writing a two-level model of Mari morphology]

The article describes some concrete problems that were encountered when writing a two-level model of Mari morphology. Mari is an agglutinative Finno-Ugric language spoken in Russia by about 600 000 people. The work was begun in the 1980s on the basis of K. Koskenniemi’s Two-Level Morphology (1983), but in the latest stage R. Beesley’s and L. Karttunen’s Finite State Morphology (2003) was used. Many of the problems described in the article concern the inexplicitness of the rules in Mari grammars and the lack of information about the exact distribution of some suffixes, e.g. enclitics. The Mari grammars usually give complete paradigms for a few unproblematic verb stems, whereas the difficult or unclear forms of certain verbs are only superficially discussed. Another example of phenomena that are poorly described in grammars is the way suffixes with an initial sibilant combine to stems ending in a sibilant. The help of informants and searches from electronic corpora were used to overcome such difficulties in the development of the two-level model of Mari. The variation of the order of plural markers, case suffixes and possessive suffixes is a typical feature of Mari. The morphotactic rules constructed for Mari declensional forms tend to be recursive and their productivity must be limited by some technical device, such as filters. In the present model, certain plural markers were treated like nouns. The positional and functional versatility of the possessive suffixes can be regarded as the most challenging phenomenon in attempts to formalize the Mari morphology. Cyrillic orthography, which was used in the model, also caused problems. For instance, a Cyrillic letter may represent a sequence of two sounds, the first being part of the word stem while the other belongs to a suffix. In some cases, letters for voiced consonants are also generalized to represent voiceless consonants. Such orthographical conventions distance a morphological model based on orthography from the actual (morpho)phonological processes in the language.

Cost Optimisation of Mobile Advertising Client Data Transfer

Data traffic caused by mobile advertising client software when it is communicating with the network server can be a pain point for many application developers who are considering advertising-funded application distribution, since the cost of the data transfer might scare their users away from using the applications. For the thesis project, a simulation environment was built to mimic the real client-server solution for measuring the data transfer over varying types of connections with different usage scenarios. For optimising data transfer, a few general-purpose compressors and XML-specific compressors were tried for compressing the XML data, and a few protocol optimisations were implemented. For optimising the cost, cache usage was improved and pre-loading was enhanced to use free connections to load the data. The data traffic structure and the various optimisations were analysed, and it was found that the cache usage and pre-loading should be enhanced and that the protocol should be changed, with report aggregation and compression using WBXML or gzip.

Similar problems, different solutions: Comparing refuse collection in the Netherlands and Spain

Local public service provision can vary greatly because of differences in institutional arrangements, public service markets, and national traditions regarding government intervention. In this paper we compare the procedures adopted by the local governments of the Netherlands and Spain in arranging for the provision of solid waste collection. We find that Spain faces a consolidation problem, opting more frequently to implement policies of privatization and cooperation, at the expense of competition. By contrast, the Netherlands has, on average, larger municipalities, resorting somewhat less to privatization and cooperation, and more to competition. The two options - cooperation and competition - have their merits when striving to strike a balance between transaction costs and scale economies. The choices made in organizational reform seem to be related to several factors, among which the nature of the political system and the size of municipalities appear to be relevant.

Ultrafine grinding of FGD and phosphogypsum with an attrition bead mill and a jet mill : optimisation and modelling of grinding and mill comparison

Fine powders of minerals are used commonly in the paper and paint industry, and for ceramics. Research for utilizing of different waste materials in these applications is environmentally important. In this work, the ultrafine grinding of two waste gypsum materials, namely FGD (Flue Gas Desulphurisation) gypsum and phosphogypsum from a phosphoric acid plant, with the attrition bead mill and with the jet mill has been studied. The ' objective of this research was to test the suitability of the attrition bead mill and of the jet mill to produce gypsum powders with a particle size of a few microns. The grinding conditions were optimised by studying the influences of different operational grinding parameters on the grinding rate and on the energy consumption of the process in order to achieve a product fineness such as that required in the paper industry with as low energy consumption as possible. Based on experimental results, the most influential parameters in the attrition grinding were found to be the bead size, the stirrer type, and the stirring speed. The best conditions, based on the product fineness and specific energy consumption of grinding, for the attrition grinding process is to grind the material with small grinding beads and a high rotational speed of the stirrer. Also, by using some suitable grinding additive, a finer product is achieved with a lower energy consumption. In jet mill grinding the most influential parameters were the feed rate, the volumetric flow rate of the grinding air, and the height of the internal classification tube. The optimised condition for the jet is to grind with a small feed rate and with a large rate of volumetric flow rate of grinding air when the inside tube is low. The finer product with a larger rate of production was achieved with the attrition bead mill than with the jet mill, thus the attrition grinding is better for the ultrafine grinding of gypsum than the jet grinding. Finally the suitability of the population balance model for simulation of grinding processes has been studied with different S , B , and C functions. A new S function for the modelling of an attrition mill and a new C function for the modelling of a jet mill were developed. The suitability of the selected models with the developed grinding functions was tested by curve fitting the particle size distributions of the grinding products and then comparing the fitted size distributions to the measured particle sizes. According to the simulation results, the models are suitable for the estimation and simulation of the studied grinding processes.

Optimisation of the lipase-catalysed preparation of a nucleoside prodrug model using an experimental design methodology

The preparation of 2', 3'-di-O-hexanoyluridine (2) by a Candida antarctica B lipase-catalysed alcoholysis of 2', 3', 5'-tri-O-hexanoyluridine (1) was optimised using an experimental design. At 25 ºC better experimental conditions allowed an increase in the yield of 2 from 80% to 96%. In addition to the yield improvement, the volume reaction could be diminished in a factor of 5 and the reaction time significantly shortened.

Trends and strategies of ozone application in environmental problems

Efforts presented by the scientific community in recent years towards the development of numerous green chemical processes and wastewater treatment technologies are presented and discussed. In the light of these approaches, environmentally friendly technologies, as well as the key role played by the well-known advanced oxidation processes, are discussed, giving special attention to the ones comprising ozone applications. Fundamentals and applied aspects dealing with ozone technology and its application are also presented.