718 resultados para Optical fiber testing
Resumo:
报道了一种高精度测量光纤连接器端面几何参量的自动测量仪。叙述了光纤连接器的端面几何参量的测量原理。由光纤连接器端面形貌和纤芯中心坐标,可以高精度得到曲率半径、顶点偏移量、端面倾斜角和光纤高度等影响连接器性能的关键端面几何参量。该仪器体积小,自动化程度高,用户界面友好,使用方便,可测量物理接触、角度式物理接触等类型的光纤连接器端面几何参量。实际测量证明,该测量仪有很好的重复测量精度。该测量仪与美国Dorc公司ZX-1 mini PMS测量仪和Norland公司NC3000测量仪相比,测量精度水平相当。该仪器
Resumo:
理论分析和讨论了基于频域相位共轭技术的交叉相位调制所致信号失真的复原和补偿机理,数值模拟了在交叉相位调制作用下,高斯脉冲在中距相位共轭光纤系统中的传输演化过程.结果表明,频域相位共轭技术能够抑制交叉相位调制对光纤系统中传输信号的损害,复原其所导致的信号失真,并能够同步补偿群速度色散和自相位调制非线性效应所导致的信号失真.合适的初始脉冲时延和初始脉冲啁啾有利于频域相位共轭技术对交叉相位调制所致信号失真的抑制.
Resumo:
光学相位共轭(OPC)技术能够同时且高效地补偿光纤传输过程中色散及非线性效应所导致的信号失真,且该技术同脉冲调制方式无关。从理论上分析了在自陡峭效应(SS)作用下高斯脉冲信号在中距相位共轭系统中的传输演化特性,数值模拟了在其作用下超短飞秒高斯脉冲的动态传输过程,讨论了自陡峭效应对中距相位共轭系统复原性能的影响。结果表明自陡峭效应将导致高斯脉冲信号发生峰值漂移和脉冲后沿变陡,相位共轭系统不能补偿由此导致的脉冲失真和畸变。引入合适的色散可以减小这种信号失真,并使得相位共轭系统能够同时补偿由于色散、自相位调制和
Resumo:
在干涉检验过程中, 被检元件的面形误差检测精度受到干涉仪系统结构的影响, 从而降低测量结果的可靠性。为了得到较高的检测精度, 必须对检测系统进行分析, 建立测量误差和系统结构的关联度。根据菲涅耳衍射近似理论, 就菲佐干涉仪中的准直镜和标准镜面形误差对透过检测的影响进行了研究。通过对波前相位传递情况的分析, 得出波前误差和系统结构参量的相关性, 去除空腔系统误差, 优化结构参量, 并建立准直镜误差容限表达式。经计算得出, 当被检面形变误差为0.2λ时, 测试误差可以达到0.02λ, 而对准直镜的面形误差要求
Resumo:
分析了布里渊分布式光纤传感技术原理,采用自行研制的光纤单纵模分布反馈(DFB)激光器结合电光调制技术,利用相干检测技术,对布里渊微弱后向散射信号进行检测。通过改进滤波放大技术,对微弱后向散射光信号进行有效放大,再用扰偏技术及信号采样平均处理,实现对光纤传感器后向布里渊散射信号在11 GHz高频段直接采集显示。结果表明,探测所得布里渊散射信号峰值功率可达50 mV,能有效降低解调系统信号检测难度,改善了系统信噪比(SNR)。初步实验结果证明了该方案的可行性。
Resumo:
详细描述了用光纤耦合、波长复用的全息光盘仔储光路.指出在全息光盘驱动器即将市场化的今天.由于其光路简单、光学元件较少、性价比高.很有可能成为新的全息光盘驱动器的核心技术之一。由于短波长单模光纤及其双波长光纤分束器件的要求比较高.而用多模光纤进行准单模输出调整.以及用分光棱镜进行光束的分光.同时用对双波长敏感的光致聚合物材料进行存储.其光谱灵敏度均匀.光谱范围互不重叠。实验结果表明.光路结构合理.存储效果良好。
Resumo:
报道了一种基于光时域反射计的全分布式光纤漏油传感器,该传感器能实现分布式实时监测长输油管道,及时发现小型的漏油事件.传感器沿管道铺设,利用光时域反射计实时测量光纤在长度上的损耗变化特点,及时发现并定位管道上的每一处泄漏事件.模拟实验证明了其实际操作的可行性,长期使用的稳定性和各种抗干扰性,能在15min内发现并定位漏油事件,且定位准确度为3m.
Resumo:
探求新的具有优良的热学和光学性能的基质玻璃系统,是获得具有宽带宽和增益平坦的掺Er^3+光纤放大器(EDFA)的一种有效途径。制备了一种新型氧氟碲酸盐玻璃TeO2-BaF2-LaF3,并对其热学性能和光学性质进行了测试。应用乍得-奥菲尔特(Judd-Ofelt)理论计算了Er^3+离子的J-O理论参量和荧光寿命r。探讨了氟化物的引入对碲酸盐玻璃结构的改变的影响,并分析了其对玻璃的热学性质和光学性质的影响。实验发现,获得的氧氟碲酸盐玻璃具有优良的热学稳定性(△T=156.6C),宽的荧光半峰全宽(72nm)
Resumo:
The fluorescence and up-conversion spectral properties of Er3+-doped TeO2-ZnO and TeO2-ZnO-PbCl2 glasses suitable for developing optical fiber amplifier and laser have been fabricate and characterized. Strong green (around 527-550 nm) and red (around 661 nm) up-conversion emissions under 977 nm laser diode excitation were investigated, corresponding to H-2(11/2), S-4(3/2), --> I-4(15/2) and F-4(9/2) --> I-4(15/2) transitions of Er3+ ions respectively, have been observed and the involved mechanisms have been explained. The dependence of up-converted fluorescence intensity versus laser power confirm that two-photons contribute to up-conversion of the green-red emissions. The novelty of this kind of optical material has been its ability in resisting devitrification, and its promising optical properties strongly encourage for their further development as the rare-earth doped optical fiber amplifiers and upconversion fiber laser systems.
Resumo:
分析了掺Er^3+碲酸盐玻璃的热力学稳定性能,研究了掺Er^3+碲酸盐玻璃的吸收和荧光光谱性质;应用Judd-Ofelt理论计算了碲酸盐玻璃中Er^3+离子的强度参数Ω(Ω2=4.79×10^-20cm^2,Ω4=1.52×10^-20cm^2,Ω6=0.66×10^-20cm^2),计算了离子的自发跃迁几率,荧光分支比;应用McCumber理论计算了Er^3+的受激发射截面(σe=10.40×10^-21cm^2)、Er^3+离子^4I13/2→^4I15/2发射谱的荧光半高宽(FWHM=65.5nm)
Resumo:
研究了一种新型掺Er^3+碲酸盐玻璃的光谱性质;应用Judd-Ofelt理论计算了碲酸盐玻璃中Er^3+离子的强度参数Ω(Ω2=4.79×10^-20cm^2,Ω4=1.52×10^-20cm^2,Ω6=0.66×10^-20cm^2),计算了离子的自发跃迁概率,荧光分支比;应用McCumber理论计算了Er^3+的受激发射截面(σe=10.40×10^-21cm^2),Er^3+离子^4I13/2→^4I15/2发射谱的荧光半高宽(FWHM=65.5nm)及各能级的荧光寿命(^4I13/2能级为τrad
Resumo:
Dy3+ doped oxyfluoride silicate glass was prepared and its optical absorption, 1.3 mu m emission, and upconversion luminescence properties were studied. Furthermore, the Judd-Ofelt [Phys. Rev. 127, 750 (1962); J. Chem. Phys. 37, 511 (1962)] intensity parameters, oscillator strengths, spontaneous transition probability, fluorescence branching ratio and radiative lifetime were calculated by Judd-Ofelt theory, while stimulated emission cross section of H-6(9/2)+F-6(11/2)-> H-6(15/2) transition was calculated by McCumber theory [Phys. Rev. A. 134, 299 (1964)]. According to the obtained Judd-Ofelt intensity parameters Omega(2)=2.69x10(-20) cm(2), Omega(4)=1.64x10(-20) cm(2), and Omega(6)=1.64x10(-20) cm(2), the radiative lifetime was calculated to be 810 mu s for 1.3 mu m emission, whose full width at half maximum and sigma(e) were 115 nm and 2.21x10(-20)cm(2), respectively. In addition, near infrared to visible upconversion luminescence was observed and evaluated. The results suggest that Dy3+ doped oxyfluoride silicate glass can be used as potential host material for developing broadband optical amplifiers and laser applications.
Resumo:
We report near infrared broadband emission of bismuth-doped barium-aluminum-borate glasses. The broadband emission covers 1.3 mum window in optical telecommunication systems. And it possesses wide full width at half maximum (FWHM) of similar to 200nm and long lifetime as long as 350 mus. The luminescent properties are quite sensitive to glass compositions and excitation wavelengths. Based on energy matching conditions, we suggest that the infrared emission may be ascribed to P-3(1) --> P-3(0) transition of Bi+. The broad infrared emission characteristics of this material indicate that it might be a promising candidate for broadband optical fiber amplifiers and tunable lasers. (C) 2005 Optical Society of America.