Radiation-Pressure Acceleration of Ion Beams Driven by Circularly Polarized Laser Pulses

We present experimental studies on ion acceleration from ultrathin diamondlike carbon foils irradiated by ultrahigh contrast laser pulses of energy 0.7 J focused to peak intensities of 5×1019  W/cm2. A reduction in electron heating is observed when the laser polarization is changed from linear to circular, leading to a pronounced peak in the fully ionized carbon spectrum at the optimum foil thickness of 5.3 nm. Two-dimensional particle-in-cell simulations reveal that those C6+ ions are for the first time dominantly accelerated in a phase-stable way by the laser radiation pressure.

Methods to objectify reversibility of glaucomatous cupping

Lowering intraocular pressure in adults with glaucoma may be associated with an improvement in appearance of the optic nerve head. The stage of disease, the amount of intraocular pressure reduction, and the age of the patient probably influence the occurrence of this event. The clinical relevance of 'reversal' has not been established with certainty. The reversibility of glaucomatous cupping can be detected by subjective and qualitative means (examination of the patient or of fundus photographs) or by quantitative techniques such as photogrammetry, computerized image analysis, and scanning laser tomography. Clinical and experimental studies are providing new information about the behavior of the optic nerve head tissues in response to changes in intraocular pressure.

Direct, positive feedbacks produce instability in models of interrelationships among soil structure, plants and arbuscular mycorrhizal fungi

Current conceptual models of reciprocal interactions linking soil structure, plants and arbuscular mycorrhizal fungi emphasise positive feedbacks among the components of the system. However, dynamical systems with high dimensionality and several positive feedbacks (i.e. mutualism) are prone to instability. Further, organisms such as arbuscular mycorrhizal fungi (AMF) are obligate biotrophs of plants and are considered major biological agents in soil aggregate stabilization. With these considerations in mind, we developed dynamical models of soil ecosystems that reflect the main features of current conceptual models and empirical data, especially positive feedbacks and linear interactions among plants, AMF and the component of soil structure dependent on aggregates. We found that systems become increasingly unstable the more positive effects with Type I functional response (i.e., the growth rate of a mutualist is modified by the density of its partner through linear proportionality) are added to the model, to the point that increasing the realism of models by adding linear effects produces the most unstable systems. The present theoretical analysis thus offers a framework for modelling and suggests new directions for experimental studies on the interrelationship between soil structure, plants and AMF. Non-linearity in functional responses, spatial and temporal heterogeneity, and indirect effects can be invoked on a theoretical basis and experimentally tested in laboratory and field experiments in order to account for and buffer the local instability of the simplest of current scenarios. This first model presented here may generate interest in more explicitly representing the role of biota in soil physical structure, a phenomenon that is typically viewed in a more process- and management-focused context. (C) 2011 Elsevier Ltd. All rights reserved.

Diamond machining of silicon: A review of advances in molecular dynamics simulation

Molecular dynamics (MD) simulation has enhanced our understanding about ductile-regime machining of brittle materials such as silicon and germanium. In particular, MD simulation has helped understand the occurrence of brittle–ductile transition due to the high-pressure phase transformation (HPPT), which induces Herzfeld–Mott transition. In this paper, relevant MD simulation studies in conjunction with experimental studies are reviewed with a focus on (i) the importance of machining variables: undeformed chip thickness, feed rate, depth of cut, geometry of the cutting tool in influencing the state of the deviatoric stresses to cause HPPT in silicon, (ii) the influence of material properties: role of fracture toughness and hardness, crystal structure and anisotropy of the material, and (iii) phenomenological understanding of the wear of diamond cutting tools, which are all non-trivial for cost-effective manufacturing of silicon. The ongoing developmental work on potential energy functions is reviewed to identify opportunities for overcoming the current limitations of MD simulations. Potential research areas relating to how MD simulation might help improve existing manufacturing technologies are identified which may be of particular interest to early stage researchers.

The Beta Agonist Lung Injury Trial Prevention:A Randomized Controlled Trial

Rationale: Experimental studies suggest that pretreatment with b-agonists might prevent acute lung injury (ALI).

Objectives: To determine if in adult patients undergoing elective esophagectomy, perioperative treatment with inhaled b-agonists effects the development of early ALI.

Methods:We conducted a randomized placebo-controlled trial in 12 UK centers (2008-2011). Adult patients undergoing elective esophagectomy were allocated to prerandomized, sequentially numbered treatment packs containing inhaled salmeterol (100 mg twice daily) or a matching placebo. Patients, clinicians, and researchers were masked to treatment allocation. The primary outcome was development of ALI within 72 hours of surgery. Secondary outcomes were ALI within 28 days, organ failure, adverse events, survival, and health-related quality of life. An exploratory substudy measured biomarkers of alveolar-capillary inflammation and injury.

Measurements and Main Results: A total of 179 patients were randomized to salmeterol and 183 to placebo. Baseline characteristics were similar. Treatment with salmeterol did not prevent early lung injury (32 [19.2%] of 168 vs. 27 [16.0%] of 170; odds ratio [OR], 1.25; 95% confidence interval [CI], 0.71-2.22). There was no difference in organ failure, survival, or health-related quality of life.Adverse events were less frequent in the salmeterol group (55 vs. 70; OR, 0.63; 95% CI, 0.39-0.99), predominantly because of a lower number of pneumonia (7 vs. 17; OR, 0.39; 95% CI, 0.16-0.96). Salmeterol reduced some biomarkers of alveolar inflammation and epithelial injury.

Conclusion: Perioperative treatment with inhaled salmeterol was well tolerated but did not prevent ALI.

Clinical trial registered with International Standard Randomized Controlled Trial Register (ISRCTN47481946) and European Union database of randomized Controlled Trials (EudraCT 2007-004096-19).Copyright © 2014 by the American Thoracic Society.

Modelling and characterization of ultrasonic consolidation process of Aluminium alloys

Ultrasonic consolidation process is a rapid manufacturing process used to join thin layers of metal at low temperatures and low energy consumption. In this work, finite element method has been used to simulate the ultrasonic consolidation of Aluminium alloys 6061 (AA-6061) and 3003 (AA-3003). A thermomechanical material model has been developed in the framework of continuum cyclic plasticity theory which takes into account both volume (acoustic softening) and surface (thermal softening due to friction) effects. A friction model based on experimental studies has been developed, which takes into account the dependence of coefficient of friction upon contact pressure, amount of slip, temperature and number of cycles. Using the developed material and friction model ultrasonic consolidation (UC) process has been simulated for various combinations of process parameters involved. Experimental observations are explained on the basis of the results obtained in the present study. The current research provides the opportunity to explain the differences of the behaviour of AA-6061 and AA-3003 during the ultrasonic consolidation process. Finally, trends of the experimentally measured fracture energies of the bonded specimen are compared to the predicted friction work at the weld interface resulted from the simulation at similar process condition. Similarity of the trends indicates the validity of the developed model in its predictive capability of the process. © 2008 Materials Research Society.

Improving composite damage modelling through automatic placement of cohesive elements

Numerous experimental studies of damage in composite laminates have shown that intralaminar (in-plane) matrix cracks lead to interlaminar delamination (out-of-plane) at ply interfaces. The smearing of in-plane cracks over a volume, as a consequence of the use of continuum damage mechanics, does not always effectively capture the full extent of the interaction between the two failure mechanisms. A more accurate representation is obtained by adopting a discrete crack approach via the use of cohesive elements, for both in-plane and out-of-plane damage. The difficulty with cohesive elements is that their location must be determined a priori in order to generate the model; while ideally the position of the crack migration, and more generally the propagation path, should be obtained as part of the problem’s solution. With the aim of enhancing current modelling capabilities with truly predictive capabilities, a concept of automatic insertion of interface elements is utilized. The consideration of a simple traction criterion in relation to material strength, evaluated at each node of the model (or of the regions of the model where it is estimated cracks might form), allows for the determination of initial crack location and subsequent propagation by the insertion of cohesive elements during the course of the analysis. Several experimental results are modelled using the commercial package ABAQUS/Standard with an automatic insertion subroutine developed in this work, and the results are presented to demonstrate the capabilities of this technique.

Farm animal welfare:Assessing risks attributable to the prenatal environment

An ever-expanding scientific literature highlights the impact of the prenatal environment on many areas of biology. Across all major farmed species, experimental studies have clearly shown that prenatal experiences can have a substantial impact on outcomes relevant to later health, welfare and productivity. In particular, stress or sub-optimal nutrition experienced by the mother during pregnancy has been shown to have wide-ranging and important effects on how her offspring cope with their social, physical and infectious environment. Variation in the conditions for development provided by the reproductive tract or egg, for instance by altered nutritional supply or hormonal exposure, may therefore explain a large degree of variation in many welfare- and productivity-relevant traits. The scientific literature suggests a number of management practices for pre-birth/hatch individuals that could compromise their later welfare. Such studies may have relevance for the welfare of animals under human care, depending on the extent to which real life conditions involve exposure to these practices. Overall, the findings highlight the importance of extending the focus on animal welfare to include the prenatal period, an aspect which until recently has been largely neglected. © 2012 Universities Federation for Animal Welfare The Old School.

Electron-impact ionization of the metastable excited states of Li +

Electron-impact ionization cross sections for the 1s2s 1S and 1s2s 3S metastable states of Li+ are calculated using both perturbative distorted-wave and non-perturbative close-coupling methods. Term-resolved distorted-wave calculations are found to be approximately 15% above term-resolved R-matrix with pseudostates calculations. On the other hand, configuration-average time-dependent close-coupling calculations are found to be in excellent agreement with the configuration-average R-matrix with pseudostates calculations. The non-perturbative R-matrix and close-coupling calculations provide a benchmark for experimental studies of electron-impact ionization of metastable states along the He isoelectronic sequence.

Investigations of ultrafast charge dynamics in laser-irradiated targets by a self probing technique employing laser driven protons

The divergent and broadband proton beams produced by the target normal sheath acceleration mechanism provide the unique opportunity to probe, in a point-projection imaging scheme, the dynamics of the transient electric and magnetic fields produced during laser-plasma interactions. Commonly such experimental setup entails two intense laser beams, where the interaction produced by one beam is probed with the protons produced by the second. We present here experimental studies of the ultra-fast charge dynamics along a wire connected to laser irradiated target carried out by employing a ‘self’ proton probing arrangement – i.e. by connecting the wire to the target generating the probe protons. The experimental data shows that an electromagnetic pulse carrying a significant amount of charge is launched along the wire, which travels as a unified pulse of 10s of ps duration with a velocity close to speed of light. The experimental capabilities and the analysis procedure of this specific type of proton probing technique are discussed.

A Design & Feasibility Study of the Spaced Learning Programme

Objectives There is evidence from neuroscience, cognitive psychology and educational research that the delivery of a stimulus in a spaced format (over time) rather than a massed format (all at once) leads to more effective learning. This project aimed to pilot spaced learning materials using various spacing lengths for GCSE science by exploring the feasibility of introducing spaced leaning into regular classrooms and by evaluating teacher fidelity to the materials. The spaced learning methods will then be compared with traditional science revision techniques and a programme manual will be produced. Design A feasibility study. Methods A pilot study (4 schools) was carried out to examine the feasibility and teacher fidelity to the materials, using pupil workshops and teacher interviews. A subsequent random assignment experimental study (12 schools) will involve pre and post testing of students on a science attainment measure and a post-test implementation questionnaire. Results The literature review found that longer spacing intervals between repetitions of material (>24 hours) may be optimal for long term memory formation than shorter intervals. A logic model was developed to inform the design of various programme variants for the pilot and experimental study. This paper will report qualitative data from the initial pilot study. Conclusions The paper uses this research project as an example to explain the importance of conducting pilot work and small scale experimental studies to explore the feasibility and inform the design of educational interventions, rather than prematurely moving to RCT type studies.

Improving the wellbeing of staff who work in palliative care settings: a systematic review of psychosocial interventions

Background: Staff in palliative care settings perform emotionally demanding roles which may lead to psychological distress including stress and burnout. Therefore, interventions have been designed to address these occupational risks.

Aim: To investigate quantitative studies exploring the effectiveness of psychosocial interventions that attempt to improve psychological wellbeing of palliative care staff.

Design: A systematic review was conducted according to methodological guidance from UK Centre for Reviews and Dissemination.

Data sources: A search strategy was developed based on the initial scans of palliative care studies. Potentially eligible research articles were identified by searching the following databases: CINAHL, MEDLINE (Ovid), PsycINFO and Web of Science. Two reviewers independently screened studies against pre-set eligibility criteria. To assess quality, both researchers separately assessed the remaining studies using the Quality Assessment Tool for Quantitative Studies.

Results: A total of 1786 potentially eligible articles were identified – nine remained following screening and quality assessment. Study types included two randomised controlled trials, two non-randomised controlled trial designs, four one-group pre–post evaluations and one process evaluation. Studies took place in the United States and Canada (5), Europe (3) and Hong Kong (1). Interventions comprised a mixture of relaxation, education, support and cognitive training and targeted stress, fatigue, burnout, depression and satisfaction. The randomised controlled trial evaluations did not improve psychological wellbeing of palliative care staff. Only two of the quasi-experimental studies appeared to show improved staff wellbeing although these studies were methodologically weak.

Conclusion: There is an urgent need to address the lack of intervention development work and high-quality research in this area.

Aplicações das redes de Bragg na biomecânica

O presente trabalho tem como objectivo o estudo, desenvolvimento e aplicações na área da biomecânica de sensores intrínsecos baseados em redes de Bragg em fibras ópticas (FBG). As aplicações são feitas em modelos biomecânicos in vitro tais como: implantes de anca, prótese de joelho, placas de osteossíntese e implantes dentários. A optimização do desenvolvimento de próteses e respectivos elementos de fixação é actualmente dependente da geração e validação experimental de seus modelos computacionais. A validação destes modelos é normalmente feita utilizando-se dados de ensaios não invasivos e invasivos em modelos sintéticos. Em ensaios in vitro os sensores convencionais têm um princípio de funcionamento eléctrico e apresentam por vezes dimensões inadequadas. Existem situações exploradas no presente trabalho, tais como sensoriamento de superfícies irregulares e junções ou ainda análises de deformações internas, onde é recomendável a utilização de sensores FBG, pois apresentam dimensões reduzidas e flexibilidade o que permite efectuar medidas localizadas. O desenvolvimento de um protocolo de utilização de FBG e a sua aplicação no contexto apresentado demonstrou-se mais adequado, pela precisão e segurança futura oferecidas. Foi desenvolvida uma metodologia experimental para medidas de deformações utilizando FBG ao longo de uma placa de osteossíntese metálica aparafusada a um fémur sintético fracturado. Foi efectuada a monitorização da cura do cimento ósseo utilizado como fixador do prato tibial na artroplastia total do joelho através da medida da sua contracção e temperatura. Foi também desenvolvido um sistema refrigerador com resposta às leituras de temperatura com vista a evitar a necrose do osso. Foram efectuados estudos de deformação nesse cimento após a sua cura, como resultado da aplicação de cargas mecânicas estáticas. Foram efectuados estudos da cura de cimento ósseo aplicado a próteses de anca e também de deformações nestas próteses. Foi ainda efectuado o estudo comparativo de vários implantes dentários através da medida da distribuição de deformações como resposta a excitações mecânicas impulsivas. Para a desmodulação das FBG foram inicialmente utilizados sistemas comerciais. Entretanto algumas aplicações não puderam ser implementadas com estes sistemas comerciais devido à baixa reflectividade das FBG utilizadas, mas fundamentalmente devido à necessidade de executar testes com uma taxa de aquisição maior do que os 5 Hz disponíveis (cerca de 15 kHz). Por estes motivos foi desenvolvido um sistema optoelectrónico completo de desmodulação de FBG baseado num filtro sintonizável e que tem como característica principal a alta taxa de aquisição (até 1,2 MHz) mas também se destaca pela facilidade na reconfiguração dos parâmetros de leitura, pela apresentação duma interface de utilizador amigável e pela capacidade de operar com até 5 FBG na mesma fibra óptica.

Ecological interactions in populations facing environmental stress

O zooplâncton, particularmente os cladóceros, são organismos de água doce importantes na regulação da produção primária dos ecossistemas de água doce. No entanto, também podem adaptar-se a condições salobras. Tendo em conta as previsões no âmbito das alterações climáticas, a intrusão salina pode ocorrer a par com a subida de temperatura. As populações de água doce podem ficar vulneráveis aos efeitos interativos da salinidade e da temperatura, de acordo com os seus limites de tolerância e capacidade de adaptação ao stress ambiental. Assim, a presente tese analisou as interações resultantes das alterações destes agentes de stress em populações de cladóceros de água doce. Primeiro, comparou-se a halotolerância de diferentes genótipos de Simocephalus vetulus provenientes de populações de água doce e de água salobra de modo a avaliar a existência de uma componente genética de resistência à salinidade. A sensibilidade aguda dos genótipos variou na mesma gama de concentrações; todavia, todos os genótipos da população salobra, exceto um, foram mais tolerantes do que os de água doce, em termos de tempo à imobilização. Contudo, não foi possível estabelecer uma relação entre a performance reprodutiva em condições salobras e o contexto ambiental de origem destes genótipos. Mais, estes ensaios mostraram que as populações de água doce têm potencial para tolerar incrementos de salinidade. Como tal, pode-se concluir que a seleção a que os genótipos estão sujeitos no seu local de origem foi mais fraca do que o esperado. Segundo, investigou-se a capacidade de aclimatação de Daphnia galeata à salinidade e temperatura, de modo a avaliar a halotolerância de Daphnia a duas temperaturas num cenário de aclimatação multigeracional. O objetivo foi compreender se a pré-adaptação ao stress ambiental (20ºC e 25ºC versus 0 g/L e 1 g/L de NaCl) influenciou posteriormente as respostas a estes agentes de stress. Verificou-se uma tendência para um aumento de sensibilidade ao NaCl, a temperaturas mais elevadas. No entanto, este efeito foi anulado após nove gerações, mas apenas quando os organismos foram aclimatados aos dois agentes de stress em simultâneo (salinidade e temperatura elevada). Terceiro, demonstrou-se experimentalmente que a salinidade interferiu com a competição interespecífica, alterando a composição das comunidades zooplanctónicas. Este conjunto de evidências permitiu-nos refletir nos múltiplos impactos de agentes de stress, particularmente os relacionados com as previsões de alterações climáticas. Em paralelo aos estudos de natureza experimental, e numa perspetiva de Educação para o Desenvolvimento Sustentável (EDS), importa também promover o desenvolvimento de competências necessárias à compreensão de mudanças ambientais globais (e.g., o impacto da salinidade e da temperatura) para implementar estratégias de mitigação e adaptação. Neste contexto, foi realizada uma atividade com estudantes do ensino secundário, que se tornou uma boa oportunidade para a sua aprendizagem e aquisição de competências de interpretação de dados experimentais, assim como de sensibilização para as questões ambientais.

Novel critical phenomena in optimization driven processes on networks

The work presented in this Ph.D thesis was developed in the context of complex network theory, from a statistical physics standpoint. We examine two distinct problems in this research field, taking a special interest in their respective critical properties. In both cases, the emergence of criticality is driven by a local optimization dynamics. Firstly, a recently introduced class of percolation problems that attracted a significant amount of attention from the scientific community, and was quickly followed up by an abundance of other works. Percolation transitions were believed to be continuous, until, recently, an 'explosive' percolation problem was reported to undergo a discontinuous transition, in [93]. The system's evolution is driven by a metropolis-like algorithm, apparently producing a discontinuous jump on the giant component's size at the percolation threshold. This finding was subsequently supported by number of other experimental studies [96, 97, 98, 99, 100, 101]. However, in [1] we have proved that the explosive percolation transition is actually continuous. The discontinuity which was observed in the evolution of the giant component's relative size is explained by the unusual smallness of the corresponding critical exponent, combined with the finiteness of the systems considered in experiments. Therefore, the size of the jump vanishes as the system's size goes to infinity. Additionally, we provide the complete theoretical description of the critical properties for a generalized version of the explosive percolation model [2], as well as a method [3] for a precise calculation of percolation's critical properties from numerical data (useful when exact results are not available). Secondly, we study a network flow optimization model, where the dynamics consists of consecutive mergings and splittings of currents flowing in the network. The current conservation constraint does not impose any particular criterion for the split of current among channels outgoing nodes, allowing us to introduce an asymmetrical rule, observed in several real systems. We solved analytically the dynamic equations describing this model in the high and low current regimes. The solutions found are compared with numerical results, for the two regimes, showing an excellent agreement. Surprisingly, in the low current regime, this model exhibits some features usually associated with continuous phase transitions.