Mhealth entrepreneurship: an exploratory research for a managerial model for mhealth start ups in low and middle income countries

Since some years, mobile technologies in healthcare (mHealth) stand for the transformational force to improve health issues in low- and middle-income countries (LMICs). Although several studies have identified the prevailing issue of inconsistent evidence and new evaluation frameworks have been proposed, few have explored the role of entrepreneurship to create disruptive change in a traditionally conservative sector. I argue that improving the effectiveness of mHealth entrepreneurs might increase the adoption of mHealth solutions. Thus, this study aims at proposing a managerial model for the analysis of mHealth solutions from the entrepreneurial perspective in the context of LMICs. I identified the Khoja–Durrani–Scott (KDS) framework as theoretical basis for the managerial model, due to its explicit focus on the context of LMICs. In the subsequent exploratory research I, first, used semi-structured interviews with five specialists in mHealth, local healthcare systems and investment to identify necessary adaptations to the model. The findings of the interviews proposed that especially the economic theme had to be clarified and an additional entrepreneurial theme was necessary. Additionally, an evaluation questionnaire was proposed. In the second phase, I applied the questionnaire to five start-ups, operating in Brazil and Tanzania, and conducted semi-structured interviews with the entrepreneurs to gain practical insights for the theoretical development. Three of five entrepreneurs perceived that the results correlated with the entrepreneurs' expectations of the strengths and weaknesses of the start-ups. Main shortcomings of the model related to the ambiguity of some questions. In addition to the findings for the model, the results of the scores were analyzed. The analysis suggested that across the participating mHealth start-ups the ‘behavioral and socio-technical’ outcomes were the strongest and the ‘policy’ outcomes were the weakest themes. The managerial model integrates several perspectives, structured around the entrepreneur. In order to validate the model, future research may link the development of a start-up with the evolution of the scores in longitudinal case studies or large-scale tests.

Ensaios sobre mercados artificiais com dois ativos utilizando algoritmos genéticos

A abordagem de Modelos Baseados em Agentes é utilizada para trabalhar problemas complexos, em que se busca obter resultados partindo da análise e construção de componentes e das interações entre si. Os resultados observados a partir das simulações são agregados da combinação entre ações e interferências que ocorrem no nível microscópico do modelo. Conduzindo, desta forma, a uma simulação do micro para o macro. Os mercados financeiros são sistemas perfeitos para o uso destes modelos por preencherem a todos os seus requisitos. Este trabalho implementa um Modelo de Mercado Financeiro Baseado em Agentes constituído por diversos agentes que interagem entre si através de um Núcleo de Negociação que atua com dois ativos e conta com o auxílio de formadores de mercado para promover a liquidez dos mercados, conforme se verifica em mercados reais. Para operação deste modelo, foram desenvolvidos dois tipos de agentes que administram, simultaneamente, carteiras com os dois ativos. O primeiro tipo usa o modelo de Markowitz, enquanto o segundo usa técnicas de análise de spread entre ativos. Outra contribuição deste modelo é a análise sobre o uso de função objetivo sobre os retornos dos ativos, no lugar das análises sobre os preços.

Avaliação microeconômica do comportamento de investidores frente às alterações de condições de mercado : os determinantes da não racionalidade dos investidores no mercado de fundos brasileiros

Neste trabalho buscamos identificar os principais determinantes da demanda por fundos de investimento no Brasil através do modelo Logit, que é bastante utilizado na teoria das organizações industriais. Sempre que possível realizamos “links” com os principais conceitos de finanças comportamentais. Assim, conseguimos aclarar as principais variáveis que impactam as variações de “market-share” na indústria de fundos de investimento. Concluímos que os principais indicadores observados pelos investidores no momento de tomada de decisão são o CDI, a inflação, a taxa real de juros, a variação do dólar e da bolsa de valores, por outro lado a rentabilidade acumulada dos últimos três meses é fator decisivo para que o investidor aplique ou resgate um fundo de investimento. Variáveis de risco e de retorno esperado que imaginávamos ter forte impacto, não se mostraram significativas para as variações de “share”.

Gestao tecnologia: um estudo de caso no setor sucroalcooleiro

PEDRO, Edilson da Silva Pedro. Gestão tecnológica: um estudo de caso no setor sucroalcooleiro. 2004. 145f. Dissertaçao (Mestrado em Engenharia de Producao) - Universidade Federal de Sao Carlos, Sao Carlos, 2004.

Natureza morta...edifício com vida: uma arquitetura sustentável para o Serviço de Verificação de Óbitos

Sustainability in buildings, while reducing the impact on the environment, contributes to the promotion of social welfare, to increase the health and productivity of occupants. The search for a way of build that meets the aspirations and development of humanity without, however, represent degradation of the environment, has become the great challenge of contemporary architecture. It is considered that the incorporation of principles that provide a sustainable building with careful choices of design solutions contribute to a better economic and thermal performance of the building, as well as functional and psychological comfort to its users. Based on this general understanding, this paper presents an architecture project aimed to health care whose the solutions adopted follow carefully the relevant legislation and sets his sights on the theme of sustainability. The methodology began with studies on the themes of verification service of deaths, sustainability and those application in construction developed through research in academic studies and analysis of architectural projects, using them like reference for the solutions adopted. Within the project analysis was performed a visit to the verification service of deaths in the city of Palmas in Tocantins, subsidizing information that, plus the relevant legislation, led to functional programming and pre-dimensional of the building to be designed. The result of this programming environments were individual records with information from environmental restrictions, space required for the development of activities, desirable flow and sustainability strategies, that can be considered as the first product of relevance of the professional master's degree. Finally we have outlined the basic design architecture of a Verification Service of Death SVO/RN (in portuguese), whose process of projecting defined as a guiding line of work four points: the use of bioclimatic architecture as the main feature projectual, the use of resources would provide minimal harm to the environment, the use of modulation and structure to the building as a form of rationalization and finally the search for solutions that ensure environmental and psychological comfort to users. Importantly to highlight that, besides owning a rare theme in literature that refers to architectural projects, the whole project was drawn up with foundations in projective criteria that contribute to environmental sustainability, with emphasis on thermal performance, energy efficiency and reuse of rainwater

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Fator de visão do céu e intensidade de ilhas de calor na escala do pedestre

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Formação e vivências: a representação social do ser professor em comunidades ribeirinhas do Vale do Juruá Acre

Being a teacher is a challenging task, driving action strategies that mobilize technical dimensions of being / doing teaching, but also affection. This research was conducted with teachers / students of the Special Program of formation for Teachers of Basic Education agricultural zone (PROFIR) developed by the Federal University of Acre in partnership with the State Department of Education (SEE) and City Halls of the region; locus typically Amazon and, in this research, comprises five municipalities in the Valley of Juruá - Acre. Northern Brazil. It Aims to capture the social representation of being a teacher in riverside communities. We performed this study from the Theory of Social Representations (MOSCOVICI, 1978, 1990, 2005a, 2005b, 2009, 2011) and (JODELET, 2001), from discussions on teacher formation (LDB No. 9394 of 1996). Work, among others, (TARDIF, 2004), (TARDIF; LESSARD, 2007), (NÓVOA, 1992, 1999), (ARROYO, 2007). We used as a methodological strategy, the multiple classification procedure (PCM), which is organized in two steps: Free Classification and Directed Classification, as well as semi-structured interviews, involving, thus, 137 teachers surveyed. For the analysis of the data, we appealed to software SPSS, version 13.0 for Windows, mapping the elements of the representational content through Multidimensional Analysis (MSA and SSA). Through the different strategies of analysis, we identified from the Free Classification, the regionalization: Beyond forest, teaching Attributes and Mobilized Attributes. With data of the Directed Classification, the analysis was based on the Theory of Facets (BILSKY, 2003) and (BUSCHINI, 2005) and we found: Reference of teacher; Negative Dimension and affective and technicians attributes. Finally, with the Analysis of Content (BARDIN, 2004) e (FRANK, 2005) and of the interviews the categories we found the categories: Urban relation versus agricultural, Knowledge in construction and possible bets. The report of the experiences along the edge of the rivers, in these different methodological strategies and of analysis, demonstrates the existence of symbolic and representational elements that influence and guide the educational conduct and actions of these teachers and that they are deeply anchored and objectified in technical and affective elements of the making teacher. They daily live deeply the concreteness of the Amazonian realism redesigning the Real and the symbolic one as a way to understand themselves as a teacher in adversity of this context. We also observed the historical, social and cultural local marks, framing, thus, the collective personality and generating its guides of action

A formação do enfermeiro na reflexividade

The study proposes an understanding of nurses training in reflexivity and the overcome the limits of biomedical formation model, from the thought of John Dewey, inserted in the panorama of the reflective practitioner introduced by Donald Schön and dialoguing with the perspective of the transforming action of Paulo Freire. We used a qualitative approach to collect empirical data through focus groups conducted with nursing students from 3rd to 5th year in the Faculty of Health Sciences, Trairi / UFRN in the year 2012. Data analysis occurred through the technique of thematic content analysis constituted of three stages: pre-analysis, exploration of the material, treatment of results, inference and interpretation of the material. Thus, the categories formulated by organizing, classifying and aggregating the the content of the speeches to groups who shared opinions approximations of thought generating a set of categories of analysis designed from the contents. The results present the experiences of nursing students and their reflections, demonstrating that the process of reflection permeates the journey of life. It is inferred that the knowledge acquired in these experiences do not always participate in this dialogue in this formative process, reducing previous experiences in the field of exemplification of everyday situations. We conclude that it is necessary to consolidate innovative pedagogical proposals that allow the continuous dialogue with reality, breaking with the decontextualized teaching process from reality insertion of the university. Rethinking of the structures is recommended, reinforcing the break with the biomedical model and the integration of knowledge dynamically

Análise não-linear de treliças pelo método dos elementos finitos posicional

This work presents the positional nonlinear geometric formulation for trusses using different strain measures. The positional formulation presents an alternative approach for nonlinear problems. This formulation considers nodal positions as variables of the nonlinear system instead of displacements (widely found in literature). The work also describes the arc-length method used for tracing equilibrium paths with snap-through and snap-back. Numerical applications for trusses already established in the literature and comparisons with other studies are provided to prove the accuracy of the proposed formulation

Estimativa de safra para a cultura do milho através do filme infravermelho colorido

O sistema tradicional para estimativas de safra utiliza-se de relatórios técnicos de fontes diversas. A coleta de informações, se inicia antes da época do plantio e as estimativas são vendo ajustadas de acordo com o desenvolvimento das culturas. O trabalho em questão, pretende mostrar as possibilidades do filme infravermelho colorido na estimativa de safra para a cultura do milho. As informações quantitativas foram obtidas através da densitometria de transmissão. Os trabalhos foram conduzidos na Fazenda Experimental São Manuel da Faculdade de Ciências Agronômicas - Campus de Botucatu - UNESP. Os seis tratamentos consistiram em doses diferenciais de adubo, prevendo prováveis quedas em produção. A cultura foi fotografada com filme colorido (Kodak Ektachrome 64 ASA) e infravermelho colorido (Kodak Ektachrome Infrared Film) e a densidade ótica medida em um microdensitômetro de transmissão marca Weston, modelo 877 e abertura de 0,8 mm. Para avaliar a interação entre Produção e Densidade Ótica, utilizou-se das análises de correlação e regressão linear. A análise dos resultados permitiram as seguintes conclusões principais: a) Desde que se faça as necessárias calibrações, o filme infravermelho pode ser utilizado na estimativa de safra para a cultura do milho; b) A utilização do densitômetro de transmissão, para a interpretação quantitativa dos resultados, revelou-se importante sugerindo a aplicação do método em outros tipos de culturas.

Caracterização de superfícies seletivas de freqüência e de antenas fractais para aplicações em redes sem fio

This work aims to investigate the behavior of fractal elements in planar microstrip structures. In particular, microstrip antennas and frequency selective surfaces (FSSs) had changed its conventional elements to fractal shapes. For microstrip antennas, was used as the radiating element of Minkowski fractal. The feeding method used was microstrip line. Some prototypes were built and the analysis revealed the possibility of miniaturization of structures, besides the multiband behavior, provided by the fractal element. In particular, the Minkowski fractal antenna level 3 was used to exploit the multiband feature, enabling simultaneous operation of two commercial tracks (Wi-Fi and WiMAX) regulated by ANATEL. After, we investigated the effect of switches that have been placed on the at the pre-fractal edges of radiating element. For the FSSs, the fractal used to elements of FSSs was Dürer s pentagon. Some prototypes were built and measured. The results showed a multiband behavior of the structure provided by fractal geometry. Then, a parametric analysis allowed the analysis of the variation of periodicity on the electromagnetic behavior of FSS, and its bandwidth and quality factor. For numerical and experimental characterization of the structures discussed was used, respectively, the commercial software Ansoft DesignerTM and a vector network analyzer, Agilent N5230A model

Modelo matemático para otimização dos custos de um sistema híbrido eólico-solar : aplicação no bombeamento de petróleo

This work purposes the application of a methodology to optimize the implantation cost of an wind-solar hybrid system for oil pumping. The developed model is estimated the implantation cost of system through Multiple Linear Regression technique, on the basis of the previous knowledge of variables: necessary capacity of storage, total daily energy demand, wind power, module power and module number. These variables are gotten by means of sizing. The considered model not only can be applied to the oil pumping, but also for any other purposes of electric energy generation for conversion of solar, wind or solar-wind energy, that demand short powers. Parametric statistical T-student tests had been used to detect the significant difference in the average of total cost to being considered the diameter of the wind, F by Snedecor in the variance analysis to test if the coefficients of the considered model are significantly different of zero and test not-parametric statistical by Friedman, toverify if there is difference in the system cost, by being considered the photovoltaic module powers. In decision of hypothesis tests was considered a 5%-significant level. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 3 HP. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 5 HP only to wind speed of 4m/s and 6 m/s in wind of 3 m, 4m and 5 m of diameter. There was not significant difference in costs to diameters of winds of 3 m and 4m. The mathematical model and the computational program may be used to others applications which require electrical between 2.250 W and 3.750 W. A computational program was developed to assist the study of several configurations that optimizes the implantation cost of an wind-solar system through considered mathematical model