A decade of malaria during pregnancy in Brazil: what has been done concerning prevention and management

In Brazil, malaria remains a disease of major epidemiological importance because of the high number of cases in the Amazonian Region. Plasmodium spp infections during pregnancy are a significant public health problem with substantial risks for the pregnant woman, the foetus and the newborn child. In Brazil, the control of malaria during pregnancy is primarily achieved by prompt and effective treatment of the acute episodes. Thus, to assure rapid diagnosis and treatment for pregnant women with malaria, one of the recommended strategy for low transmission areas by World Health Organization and as part of a strategy by the Ministry of Health, the National Malaria Control Program has focused on integrative measures with woman and reproductive health. Here, we discuss the approach for the prevention and management of malaria during pregnancy in Brazil over the last 10 years (2003-2012) using morbidity data from Malaria Health Information System. Improving the efficiency and quality of healthcare and education and the consolidation of prevention programmes will be challenges in the control of malaria during pregnancy in the next decade.

Association of 25-hydroxyvitamin D with metabolic syndrome in patients with psoriasis: a case-control study.

Vitamin D deficiency is associated with higher cardiovascular risk and metabolic syndrome (MeS) criteria. The main objective of this study was to analyse the association of 25-hydroxyvitamin D (25-OHD) serum levels with MeS (National Cholesterol Education Program-Adult Treatment Panel-III criteria) in 46 Spanish patients with psoriasis, but without arthritis and systemic treatment, and 46 control subjects, matched by sex and age. The patients with psoriasis showed significantly lower level of 25-OHD than controls (30.5 vs. 38.3 ng/ml; p = 0.0001). Patients with MeS had significantly lower serum levels of 25-OHD than those without MeS (24.1 ± 7.5 vs. 32.8 ± 8.9, p = 0.007), and a negative correlation was found between 25-OHD and waist circumference, diastolic blood pressure, fasting glucose, and triglyceridaemia. In the control group no significant correlation between 25-OHD and MeS was found. Al-though the sample was small, our results suggest a potential protective role for 25-OHD in the metabolic profile of patients with psoriasis without arthritis.

Indicateurs de résultats du Promedro III, situation en 2008 : rapport final

[Table des matières] 1. Introduction. 1.1. Rappel du mandat. 1.2. Méthode. 2. Résultats. 2.1. Indicateurs du nombre de consommateurs. 2.2. Indicateurs des problèmes en relation (ou non) avec les drogues chez les jeunes. 2.3. Indicateurs en relation avec la consommation problématique de drogues dures en général. 2.4. Indicateurs des conséquences négatives pour les usagers de drogues illégales. 2.5. Indicateurs des conséquences négatives pour la société. 3. Annexe.

Host factors in occupational diisocyanate asthma: a Swiss longitudinal study

Objective: To investigate the usefulness of surrogates for individual susceptibility to organic diisocyanates in occupational asthma. Subjects: All new cases declared to the Swiss National Accident Insurance Company (SUVA) for establishment of a case for compensable occupational disease during 1993. Sixty-nine persons, of whom three were women, were suspected of having occupational asthma due to isocyanates. Of these, 47 subjects fulfilled the criteria to be accepted as an occupational disease case. Methods: All subjects were studied clinically and gave a blood sample for the phenotyping of their alpha-antitrypsin status and for immunological studies. The subjects were also given a peroral dose of caffeine for the determination of their N-acetylation capacity. Finally, those with an occupational disease were subjected to the methacholine provocation test. Results: Forty-four persons with occupational disease, out of 47, were heterozygous antitrypsin carriers and/or slow acetylators of primary amines. In the bronchial provocation with methacholine, 12 of these subjects had an unaltered response and seven had a mild reaction, 13 a moderate one and 15 a severe reaction. Interpretation: The study confirms the finding that slow N-acetylators are susceptible to asthma from exposure to common diisocyanate monomers at work. The same applies to heterozygous antitrypsin-phenotype carriers. Thus, the use of these markers may reinforce the diagnostic procedure, but they cannot completely replace the immunological tests. [Authors]

Evaluation d'une association regionale de prevention du suicide en Suisse = Evaluation of a regional association for suicide prevention in Switzerland

This article discusses the evaluation of Stop Suicide, a regional association active in youth suicide prevention in Switzerland. The first part of the article presents and discusses the activities of Stop Suicide and its national context, characterized by an absence of a general national suicide prevention program. The second part specifically focuses on the evaluation of Stop Suicide, based on interviews with the members of the association's network. The evaluation reported an assessment carried out regarding the members' general perceptions about the association and its collaborations. The article suggests the possibility of creating a branch for coordinating regional suicide prevention, and it highlights the need to evaluate the impact and effects of the activities on the population concerned, youth

Field Experiments of Current Concrete Pavement Surface Characteristics Practices: Iowa Data Collection and Analysis, December 2005

One of the most important issues in portland cement concrete pavement research today is surface characteristics. The issue is one of balancing surface texture construction with the need for durability, skid resistance, and noise reduction. The National Concrete Pavement Technology Center at Iowa State University, in conjunction with the Federal Highway Administration, American Concrete Pavement Association, International Grinding and Grooving Association, Iowa Highway Research Board, and other states, have entered into a three-part National Surface Characteristics Program to resolve the balancing problem. As a portion of Part 2, this report documents the construction of 18 separate pavement surfaces for use in the first level of testing for the national project. It identifies the testing to be done and the limitations observed in the construction process. The results of the actual tests will be included in the subsequent national study reports.

Componentes da síndrome metabólica na hipertensão arterial

Este estudo teve como objetivo identificar e comparar a prevalência da síndrome metabólica entre hipertensos e normotensos. Os aspectos adotados para a definição de síndrome metabólica foram os definidos pelo National Cholesterol Education Program/Adults Treatment Painel (NCEP-ATP III). Os dados referentes aos perfis clínicos e bioquímicos foram processados no programa SPSS para cálculo de frequências absolutas e porcentagens. Utilizou-se o teste t de Student para comparações das médias, sendo as diferenças consideradas estatisticamente significantes para p<0,05. A amostra foi composta por 93 participantes normotensos e 168 hipertensos. Identificou-se a presença de síndrome metabólica em 60,7% dos hipertensos e 18,3% dos normotensos. Os portadores de hipertensão arterial apresentam diferença significante nos valores de pressão arterial (p<0,001), circunferência abdominal (p<0,001), glicemia (p<0,05) e triglicérides plasmáticos (p<0,05). A frequência dos riscos cardiometabólicos associados à síndrome metabólica é maior na presença de doença hipertensiva.

Executive Order Number Twenty Nine, December 1977

States' option on federal flood insurance.

Campagne cardiovasculaire 2013-2016 du CIPRET Valais : évaluation de la campagne 2013-2014

Le Cipret-Valais, la Société Médicale du Valais (SMV), Pharmavalais et Promotion Santé Valais, ont lancé en 2013 une campagne de sensibilisation sur l'impact du tabac sur les maladies cardiovasculaires (MCV). Cette campagne, qui sera déclinée sur trois ans (2013-2016), informe et sensibilise la population sur les liens existant entre le tabagisme et les MCV. La campagne suit différents axes : sensibiliser les fumeurs de plus de 40 ans aux conséquences du tabagisme sur leur risque de MCV, les encourager à contrôler leur pression artérielle (en pharmacie) et les inciter à prendre les mesures nécessaires à la réduction de leur risque de MCV. Dans une seconde phase, les fumeurs seront guidés dans leur démarche d'arrêt, avec des offres de désaccoutumance. Cette évaluation, qui concerne la première partie de la campagne (novembre 2013 et mars 2014), a pour but d'apporter un complément qualitatif aux données quantitatives récoltées au cours de la campagne (valeurs de tension artérielle (TA)). Des entretiens ont ainsi été menés avec le responsable du Cipret-Valais (A. Dubuis) et le président du Cipret-Valais, également responsable de la SMV pour cette campagne (Dr. D. Evéquoz). Un focus-group avec un échantillon de pharmacien était également prévu. N'ayant pu avoir lieu du fait d'une participation trop faible, il a été remplacé par des entretiens téléphoniques. Pour la partie quantitative de l'évaluation, les données sur les prises de TA en pharmacie ont été fournies par le Cipret-Valais et Pharmavalais, et celles sur la fréquentation du site internet par Cipret-Valais.

Fact Sheet: Floods and Flash Floods, 2009

Mitigation pays. It includes any activities that prevent an emergency, reduce the chance of an emergency happening, or lessen the damaging effects of unavoidable emergencies. Investing in mitigation steps now such as constructing barriers such as levees and purchasing flood insurance will help reduce the amount of structural damage to your home and financial loss from building and crop damage should a flood or flash flood occur.

Fact Sheet: Floods and Flash Floods, 2011

Mitigation pays. It includes any activities that prevent an emergency, reduce the chance of an emergency happening, or lessen the damaging effects of unavoidable emergencies. Investing in mitigation steps now such as constructing barriers such as levees and purchasing flood insurance will help reduce the amount of structural damage to your home and financial loss from building and crop damage should a flood or flash flood occur.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Nanoinventory : a representative survey of nanoparticle usage in Suisse industry

Background Addressing the risks of nanoparticles requires knowledge about their hazards, which is generated progressively, but also about occupational exposure and liberation into the environment. However, currently such information is not systematically collected, therefore the risk assessment of this exposure or liberation lacks quantitative data. In 2006 a targeted telephone survey among Swiss companies (1) showed the usage of nanoparticles in a few selected companies but did not provide data to extrapolate on the totality of the Swiss workforce. The goal of this study was to evaluate in a representative way the current prevalence and level of nanoparticle usage in Swiss industry, the health, safety and environment measures, and the number of potentially exposed workers. Results A representative, stratified mail survey was conducted among 1,626 clients of the Swiss National Accident Insurance Fund (SUVA). SUVA insures about 80,000 manufacturing firms, which represent 84% of all Swiss manufacturing companies. 947 companies answered the survey (58.3% response rate). Extrapolation to all Swiss manufacturing companies results in 1,309 workers (95%-confidence interval, 1,073 to 1,545) across the Swiss manufacturing sector being potentially exposed to nanoparticles in 586 companies (95%-CI: 145 to 1'027). This corresponds to 0.08% (95%-CI: 0.06% to 0.09%) of all Swiss manufacturing sector workers and to 0.6% (95%-CI: 0.2% to 1.1%) of companies. The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2% of those surveyed) and a high percentage of potentially exposed workers (0.5% of workers in these companies), but many other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a minority applied specific environmental protection measures. Conclusions This is the first representative nationwide study on the prevalence of nanoparticle usage across a manufacturing sector. The information about the number of companies can be used for quantitative risk assessment. Furthermore it can help policy makers designing strategies to support companies in the responsible development of safer nanomaterial use. Noting the low prevalence of nanoparticle usage, there would still seem to be time to introduce necessary protection methods in a proactive and cost effective way in Swiss industry. But if the predicted "nano-revolution" becomes true, now is the time to take action.

Annual Report of the Hawk-I Board to The Governor, General Assembly and Council on Human Services, 2009

Congress established the State Children's Health Insurance Program (SCHIP) with passage of the Balanced Budget Act of 1997, which authorized $40 billion for the SCHIP program through Federal Fiscal Year (FFY) 2007. Under the program, a federal block grant was awarded to states to provide health insurance to children from families with income about Medicaid eligibility levels.