Acousto-optic modulation of optical reflection properties in fiber Bragg gratings and the application in fiber lasers

This thesis aims to investigate the interaction of acoustic waves and fiber Bragg gratings (FBGs) in standard and suspended-core fibers (SCFs), to evaluate the influence of the fiber, grating and modulator design on the increase of the modulation efficiency, bandwidth and frequency. Initially, the frequency response and the resonant acoustic modes of a low frequency acousto-optic modulator (f < 1.2 MHz) are numerically investigated by using the finite element method. Later, the interaction of longitudinal acoustic waves and FBGs in SCFs is also numerically investigated. The fiber geometric parameters are varied and the strain and grating properties are simulated by means of the finite element method and the transfer matrix method. The study indicates that the air holes composing the SCF cause a significant reduction of the amount of silica in the fiber cross section increasing acousto-optic interaction in the core. Experimental modulation of the reflectivity of FBGs inscribed in two distinct SCFs indicates evidences of this increased interaction. Besides, a method to acoustically induce a dynamic phase-shift in a chirped FBG employing an optimized design of modulator is shown. Afterwards, a combination of this modulator and a FBG inscribed in a three air holes SCF is applied to mode-lock an ytterbium doped fiber laser. To improve the modulator design for future applications, two other distinct devices are investigated to increase the acousto-optic interaction, bandwidth and frequency (f > 10 MHz). A high reflectivity modulation has been achieved for a modulator based on a tapered fiber. Moreover, an increased modulated bandwidth (320 pm) has been obtained for a modulator based on interaction of a radial long period grating (RLPG) and a FBG inscribed in a standard fiber. In summary, the results show a considerable reduction of the grating/fiber length and the modulator size, indicating possibilities for compact and faster acousto-optic fiber devices. Additionally, the increased interaction efficiency, modulated bandwidth and frequency can be useful to shorten the pulse width of future all-fiber mode-locked fiber lasers, as well, to other photonic devices which require the control of the light in optical fibers by electrically tunable acoustic waves.

Múltiplas antenas como alternativa para aumentar a taxa de extração de chaves secretas em redes veiculares com desvanecimento lento

The communication in vehicular ad hoc networks (VANETs) is commonly divided in two scenarios, namely vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I). Aiming at establishing secure communication against eavesdroppers, recent works have proposed the exchange of secret keys based on the variation in received signal strength (RSS). However, the performance of such scheme depends on the channel variation rate, being more appropriate for scenarios where the channel varies rapidly, as is usually the case with V2V communication. In the communication V2I, the channel commonly undergoes slow fading. In this work we propose the use of multiple antennas in order to artificially generate a fast fading channel so that the extraction of secret keys out of the RSS becomes feasible in a V2I scenario. Numerical analysis shows that the proposed model can outperform, in terms of secret bit extraction rate, a frequency hopping-based method proposed in the literature.

Understanding the role of auxins and oxidative enzymes on adventitious root formation in olive (olea europaea L.) cultivars

Olive (Olea europaea L.), one of the main crops in the Mediterranean basin, is mainly propagated by cuttings, a classical propagation method that relies on the ability of the cuttings to form adventitious roots. While some cultivars are easily propagated by this technique, some of the most interesting olive cultivars are considered difficult-to-root which poses a challenge for their preservation and commercialization. Therefore, increasing the current knowledge on adventitious root formation is extremely important for species like olive. This research focuses on evaluating the role of free auxins and oxidative enzymes on adventitious root formation of two olive cultivars with different rooting ability - ‘Galega vulgar’ (difficult-to-root) and ‘Cobrançosa’ (easy-to-root). In this context, free auxin levels and enzyme activities were determined in in vitro-cultured ‘Galega vulgar’ microshoots and in semi-hardwood cuttings of cvs. ‘Galega vulgar’ and ‘Cobrançosa’. To attain this goal, an analytical method for the quantification of free indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) was developed, which is based on dispersive liquid-liquid microextraction followed by microwave derivatization (DLLME-MAD) and gas chromatography-mass spectrometry (GC/MS) analysis. The developed method was validated in terms of linearity, recovery, limit of detection (LOD) and limit of quantification (LOQ) and proved to be useful in the analysis of two very different types of plant tissues. The results from auxin quantification in olive samples point at a relationship between free auxin levels and rooting ability of both microshoots and semihardwood cuttings. A defective IBA-IAA conversion, resulting in a peak of free IAA during initiation phase, seems to be associated with low rooting ability. Likewise, differences in the activity of oxidative enzymes also appear to be related with rooting ability. Higher polyphenol oxidases (PPO) activity is likely related with an easyto- root behavior, while the opposite is true for peroxidases (POX) (including IAA oxidase (IAAox)) activity. A possible hypothesis for adventitious root formation in olive microcuttings is presented herein for the first time. Free auxins, oxidative enzymes, alternative oxidase (AOX) and reactive oxygen species (ROS) are some of the factors that may be involved in this highly complex physiological process. Interestingly, while temporal changes in auxin levels were similar between microshoots and semihardwood cuttings, the conclusions obtained from enzyme activity results in microshoots didn’t translate to semi-hardwood tissues, showing the emerging need for adaptation of classical agronomical research studies to modern techniques; Resumo: Procurando compreender o papel das auxinas e enzimas oxidativas na formação de raízes adventícias em cultivares de oliveira (Olea europaea L.) A oliveira (Olea europaea L.) é uma das principais culturas da bacia Mediterrânica e é propagada maioritariamente por estacaria, um processo altamente dependente da capacidade das estacas para formar raízes adventícias. Enquanto algumas cultivares são fáceis de propagar desta forma, algumas das cultivares de oliveira mais interessantes são consideradas difíceis de enraizar, o que dificulta a sua preservação e comercialização e torna extremamente importante aprofundar o conhecimento sobre o enraizamento adventício desta espécie. Este trabalho foca-se na avaliação do papel das auxinas livres e das enzimas oxidativas na formação de raízes adventícias em duas cultivares de oliveira com diferente capacidade de enraizamento - ‘Galega vulgar’ (difícil de enraizar) e ‘Cobrançosa’ (fácil de enraizar). Neste contexto, determinaram-se os níveis de auxinas livres e as actividades de enzimas oxidativas em microestacas de ‘Galega vulgar’ cultivadas in vitro bem como em estacas semi-lenhosas das cvs. ‘Galega vulgar’ e ‘Cobrançosa’. Para tal foi necessário desenvolver uma metodologia analítica para a quantificação de ácido indol-3-acético (IAA) e ácido indol-3-butírico (IBA), baseada em microextracção dispersiva líquido-líquido (DLLME) seguida de derivatização em microondas (MAD) e análise por cromatografia gasosa acoplada a espectrometria de massa (GC/MS). O método desenvolvido foi validado em termos de linearidade, recuperação, limite de detecção (LOD) e limite de quantificação (LOQ), e mostrou-se eficaz na análise de dois tipos de tecidos vegetais bastante diferentes. Os resultados da análise de auxinas em amostras de oliveira apontam para uma possível relação entre os níveis de auxinas livres e a capacidade de enraizamento, tanto em microestacas como em estacas semi-lenhosas. Uma conversão IBA-IAA deficiente, que resulta num pico de IAA durante a fase de iniciação, parece estar associada à baixa capacidade de enraizamento. Por outro lado, a capacidade de enraizamento também parece estar relacionada com diferenças na actividade de enzimas oxidativas. Comportamentos fáceis de enraizar estão associados a actividade mais elevada das polifenoloxidases (PPO), enquanto o oposto é verdade para a actividade das peroxidases (POX) (incluindo a IAA oxidase (IAAox)). Neste trabalho propõe-se pela primeira vez uma possível explicação para o enraizamento adventício em microestacas de oliveira. Auxinas livres, enzimas oxidativas, oxidase alternativa (AOX) e espécies reactivas de oxigénio (ROS) são alguns dos factores envolvidos neste processo fisiológico altamente complexo. Curiosamente, enquanto as alterações temporais nos níveis de auxinas foram semelhantes entre microestacas e estacas semi-lenhosas, o mesmo não se observou relativamente à actividade enzimática, o que mostra a necessidade de adaptação dos estudos agronómicos tradicionais às técnicas correntes.

Nanoestruturas multicomponentes de CoFe2O4/Ag visando aplicações biológicas

Dissertação (mestrado)—Universidade de Brasília, Instituto de Física, Programa de Pós-Graduação em Física, 2015.

Host-guest chemistry of solid coordination frameworks (SCFs) based on Copper(II)-Pyridine Ligands

283 p.

Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu

Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy milling (HEM) produces composite powders with high homogeneity and refines the grain size. This work focus to study Ta-20wt%Cu composite powders prepared by mechanical mixture and HEM with two different conditions of milling in a planetary ball mill and then their sintering using hydrogen plasma furnace and a resistive vacuum furnace. After milling, the powders were pressed in a steel dye at a pressure of 200 MPa. The cylindrical samples pressed were sintered by resistive vacuum furnace at 10-4torr with a sintering temperature at 1100ºC / 60 minutes and with heat rate at 10ºC/min and were sintered by plasma furnace with sintering temperatures at 550, 660 and 800ºC without isotherm under hydrogen atmosphere with heat rate at 80ºC/min. The characterizations of the powders produced were analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and laser granulometry. After the sintering the samples were analyzed by SEM, XRD and density and mass loss tests. The results had shown that to high intense milling condition produced composite particles with shorter milling time and amorphization of both phases after 50 hours of milling. The composite particles can produce denser structure than mixed powders, if heated above the Cu melting point. After the Cu to arrive in the melting point, liquid copper leaves the composite particles and fills the pores

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Compendio de telecomunicaciones 3. Conceptos básicos de ingeniería de Radiopropagación

Este libro, desarrolla de manera directa y sencilla el fenómeno de la propagación de las señales electromagnéticas en las bandas de frecuencia de microondas. Aborda la teoría y criterios técnicos y prácticos concernientes al diseño de los radioenlaces puntos a punto (P-P), tanto análogos como digitales. Se incluyen anexos técnicos donde los estudiantes dispondrán de información especializada generada por los fabricantes internacionales de sistemas de Radio y Mux, así como los accesorios de protección y estructuras metálicos propias de estos sistemas (torres para antenas, sistemas de tierra, pararrayos, luces de obstrucción, etc.). Se confía que este libro sea de gran utilidad en la formación de los estudiantes de esta ingeniería.

Síntesis de nanopartículas derivadas de biopolímeros extraídos de biomasa por métodos térmicos

La celulosa como un biopolímero sustentable y renovable, ha sido ampliamente estudiada para la generación de materiales que cuenten con características físicas y químicas versátiles. Los procesos para la extracción de celulosa se han modificado para lograr la conformación de celulosa nano y microfibrilada estos procesos son estudiados para conseguir mayores rendimientos y operaciones sustentables. En el presente proyecto para la formación de nanopartículas de celulosa se utiliza un proceso de irradiación de microondas, partiendo de una extracción primaria de la celulosa de dos residuos agroindustriales y un residuo de la industria del papel, mediante un pre-tratamiento posteriormente aplicar el proceso de hidrólisis asistida por microondas para la producción de las nanopartículas.

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Design of functional hybrid coatings with anti-biofouling, self-cleaning and anti-reflecting applications

263 p.

Síntese de catalisadores do tipo LaNixFe1-xO3 como precursores catalíticos para reação oxidação parcial do metano

Nickel-bases catalysts have been used in several reform reactions, such as in the partial oxidation of methane to obtain H2 or syngas (H2 + CO). High levels of conversion are usually obtained using this family of catalysts, however, their deactivation resulting from carbon deposition still remains a challenge. Different approaches have been tested aiming at minimizing this difficulty, including the production of perovskites and related structures using modern synthesis methods capable of producing low cost materials with controlled microstructural characteristics at industrial scale. To establish grounds for comparison, in the present study LaNixFe1-xO3 (x=0, 0.3 or 0.7) perovskites were prepared following the Pechini method and by microwave assisted self-combustion. All samples were sub sequently calcined at 900 °C to obtain the target phase. The resulting ceramic powders were characterized by thermogravimetric analysis, infrared spectroscopy, X ray diffraction, specific area and temperature programmed reduction tests. Calcined samples were also used in the partial oxidation reaction of methane to evaluate the level of conversion, selectivity and carbon deposition. The results showed that the calcined samples were crystalline and the target phase was formed regardless of the synthesis method. According to results obtained by Rietveld refinement, we observed the formation of 70.0% of LaNi0.3Fe0.7O3 and 30.0% of La2O3 for samples LN3F7-900- P, LN3F7-900-M and 41,6% of LaNi0.7Fe0.3O3, 30.7% of La2NiO4 and 27.7% of La2O3 for samples LN7F3-900-P and LN7F3-900-M.Temperature-programmed profiles of the LaNiO3 sample revealed the presence of a peak around 510 °C, whereas the LaFeO3 sample depicted a peak above 1000°C. The highest l evel of methane conversion was obtained for LaNiO3 synthesized by the Pechini method. Overall, catalysts prepared by the Pechini method depicted better conversion levels compared to those produced by microwave assisted self-combustion

Preparação de óxidos mistos de níquel e zinco nanoparticulados a partir de combustíveis alternativos

The field of "Materials Chemistry" has been developing in recent years and there has been a great increase of interest in the synthesis and chemical and physical properties of new inorganic solids. New routes of synthesis and synthesis modified has been developed with the aim not only to optimize the processes in laboratory scale, but also on an industrial scale, and make them acceptable by current environmental legislation. The phenomenology of current solid state chemistry properties coupled with the high temperature superconductivity, ferromagnetism, porosity molecular and colors are evidence affected by the synthesis method, which in turn can influence the technological application of these materials. From this understanding, mixed oxides of nickel and zinc nanoparticulate were synthesized by microwave-assisted combustion route using three specific types of organic fuels employing the weight ratios 1:1/2 and 1:1 of cation metallic/fuel, in order to investigate the influence of such proportions to obtain the solids. The new fuels were chosen to replace, for example, urea or glycine that are the fuels most commonly preferred in this kind of synthesis. The powders without heat treatment were studied by Thermogravimetric analysis (TGA), X-Ray Diffraction (XRD) and then calcined at 900°C. After heat treatment, the samples were characterized by analysis of X Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The modified synthesis route porposed was effective for obtaining powders. Both the alternative fuels chosen as the different weight ratios employed, influenced in the morphology and obtaining oxides