A relative gradient theory for layered materials

It is possible to remedy certain difficulties with the description of short wave length phenomena and interfacial slip in standard models of a laminated material by considering the bending stiffness of the layers. If the couple or moment stresses are assumed to be proportional to the relative deformation gradient, then the bending effect disappears for vanishing interface slip, and the model correctly reduces to an isotropic standard continuum. In earlier Cosserat-type models this was not the case. Laminated materials of the kind considered here occur naturally as layered rock, or at a different scale, in synthetic layered materials and composites. Similarities to the situation in regular dislocation structures with couple stresses, also make these ideas relevant to single slip in crystalline materials. Application of the theory to a one-dimensional model for layered beams demonstrates agreement with exact results at the extremes of zero and infinite interface stiffness. Moreover, comparison with finite element calculations confirm the accuracy of the prediction for intermediate interfacial stiffness.

A longitudinal study of self-awareness: Functional deficits underestimated by persons with brain injury

A longitudinal study of 55 adults with severe traumatic brain injury (TBI) investigated the areas of function for which they lacked self-awareness of their level of competency. Data were collected at 3 and 12 months post-injury using the Patient Competency Rating Scale. Self-awareness was measured by comparing patient self-ratings with the ratings of an infor mant. The results were consistent with previous studies, indicating that self-awareness was most impaired for activities with a large cognitive and socioemotional component, and least impaired for basic activities of daily living, memory activities, and overt emotional responses. For most areas of function that were overestimated at 3 months post-injury, self-awareness subsequently improved during the first year after injury.

Carbon structure and porosity of carbonaceous adsorbents in relation to their adsorption properties

A number of carbonaceous adsorbents were prepared by carbonisation at 600 degrees C following acidic oxidation under various conditions. Effects of the chemical nature of the precursor, such as the ratio of aromatic to aliphatic carbons and oxygen content, on the chemical and structural characteristics of the resultant chars were investigated using C-13 NMR and Raman spectroscopy, respectively. The C-13 NMR spectral parameters of the coal samples show that as the severity of oxidation conditions increased, the ratio of aromatic to aliphatic carbons increased. Furthermore, it was also found that the amount of disorganised carbon affects both the pore structure and the adsorption properties of carbonaceous adsorbents. It is demonstrated that higher amount of the disorganised carbon indicates smaller micropore size. (C) 1999 Elsevier Science Ltd. All rights reserved.

A novel method for tailoring the pore-opening size of MCM-41 materials

A novel pore tailoring method is proposed by which the pore-opening sizes of MCM-41 materials can be finely tuned without significant loss in pore volume and surface area.

The functional outcome of children after a burn injury: A pilot study

Assessment of functional outcome can be used as a measure of the effectiveness of intervention during recovery from a burn injury. This pilot study identifies the factors that are likely to be most important for determining standardized functional outcome measures for children after a burn injury; it highlights the contribution of these factors to variations in children's postburn outcomes. A focus group of 8 parents and a self-report questionnaire administered to 12 children and 13 parents were the means of obtaining information for this exploratory study. Itching was found to be one of the primary impairments that contributed to reduced functional outcome during skin healing after a burn injury. The activities of children who had been burned that were most frequently affected by the injury (as reported by parents) were schoolwork and sports; these were closely followed by sleeping, playing with other children, and unliked activities. Least affected activities were enjoying the family, eating, seeing friends, watching television, and bathing or showering. Eighty-five percent of parents reported at least some level of interference with the listed daily activities. Burn injuries are likely to cause interference with several aspects of a patient's daily life. As a result, families require ongoing support and monitoring. Further research should longitudinally compare the performance of children who have been burned with other children and adolescents.

Functional assessment and care of children with neurodevelopmental disabilities

Objectives: To determine the relationship between pediatric assessment scores and ratings by parents and teachers regarding the amount of assistance required to complete basic activities of daily living; and to examine the relationship among scores for three commonly used pediatric assessments. Design: Prospective correlational study. 205 children with developmental disabilities. The children ranged in age from 11 to 87 mo and included 72 females and 133 males of diverse socioeconomic and ethnic backgrounds. The children were evaluated by using the Battelle Developmental Inventory Screening Test, Vineland Adaptive Behavior Scales, Functional Independence Measure for Children (WeeFIM(TM) instrument), and the Amount of Assistance Questionnaire, Results: The test-retest reliability coefficients for items on the Amount of Assistance Questionnaire were found to range from 0.82 to 0.97. Correlations among subscale scores and amount of assistance ratings were highest for the WeeFIM instrument and Battelle Developmental Inventory Screening Test. The highest correlation was between WeeFIM total rating and total amount of assistance rating (r = 0.91). Conclusion: Total WeeFIM instrument ratings and severity of disability were the best predictors of amount of assistance ratings provided by parents and teachers.

Functional implications of the human T-lymphotropic virus type 1 transmembrane glycoprotein helical hairpin structure

Retrovirus entry into cells follows receptor binding by the surface exposed envelope glycoprotein (Env) subunit (SU), which triggers the membrane fusion activity of the transmembrane (TM) protein. TM protein fragments expressed in the absence of SU adopt helical hairpin structures comprising a central coiled coil, a region of chain reversal containing a disulfide-bonded loop, and a C-terminal segment that packs onto the exterior of the coiled coil in an antiparallel manner. Here we used in vitro mutagenesis to test the functional role of structural elements observed in a model helical hairpin, gp21 of human T-lymphotropic virus type 1. Membrane fusion activity requires the stabilization of the N and C termini of the central coiled coil by a hydrophobic N cap and a small hydrophobic core, respectively. A conserved Gly-Gly hinge motif preceding the disulfide-bonded loop, a salt bridge that stabilizes the chain reversal region, and interactions between the C-terminal segment and the coiled coil are also critical for fusion activity. Our data support a model whereby the chain reversal region transmits a conformational signal from receptor-bound SU to induce the fusion-activated helical hairpin conformation of the TM protein.

Methods for effective fluidization of particulate food materials

Depending on the size and shape of the materials, methods employed to achieve effective fluidization during fluid bed drying varies from use of simple hole distributors for small, light weight materials to special techniques for lager and/or moist materials. This paper reviews common air distributors used in fluidized bed drying of food particulates. Also it reviews special methods of fluidizing larger irregular food particulates.

Identification of physiologically functional peptides in dairy products

A wide range of peptides produced from milk proteins have been demonstrated to produce a physiological response in model systems. These peptides may be released from intact proteins in the gastrointestinal tract by proteolytic digestion, but are also present in fermented products such as cheese and yogurt, as a result of the action of inherent proteases, such as plasmin, and/or bacterial proteases released by the starter culture. This study investigated the presence of peptides, previously reported to have bioactive properties, in commercially available yogurts and cheeses.

A model for adsorption of condensable vapors on nonporous materials

A new isotherm is proposed here for adsorption of condensable vapors and gases on nonporous materials having type II isotherms according to the Brunauer-Deming-Deming-Teller (BDDH) classification. The isotherm combines the recent molecular-continuum model in the multilayer region, with other widely used models for sub-monolayer coverage, some of which satisfy the requirement of a Henry's law asymptote. The model is successfully tested using isotherm data for nitrogen adsorption on nonporous silica, carbon and alumina, as well as benzene and hexane adsorption on nonporous carbon. Based on the data fits, out of several different alternative choices of model for the monolayer region, the Freundlich and the Unilan models are found to be the most successful when combined with the multilayer model to predict the whole isotherm. The hybrid model is consequently applicable over a wide pressure range. (C) 2000 Elsevier Science B.V. All rights reserved.

An update on genetic, structural and functional studies of arylamine N-acetyltransferases in eucaryotes and procaryotes

Arylamine N-acetyltransferase (NAT) was first identified as the inactivator of the anti-tubercular drug isoniazid, The enzyme was shown to catalyse the transfer of an acetyl group from acetyl-CoA to the terminal nitrogen of the hydrazine drug. The rate of inactivation of isoniazid was polymorphically distributed in the population and was one of the first examples of pharmacogenetic variation, NAT was identified recently in Mycobacterium tuberculosis and is a candidate for; modulating the response to isoniazid, Genome sequences have revealed many homologous members of this unique family of enzymes. The first three-dimensional structure of a member of the NAT family identifies a catalytic triad consisting of aspartate, histidine and cysteine proposed to form the activation mechanism. So far, all procaryotic NATs resemble the human enzyme which acetylates isoniazid (NAT2), Human NAT2 is characteristic of drug-metabolizing enzymes: it is found in liver and intestine, In humans and other mammals, there are up to three different isoenzymes. If only one isoenzyme is present, it is like human NAT1. Human NAT1 and its murine equivalent specifically acetylate the folate catabolite p-amino-benzoylglutamate. NAT1 and its murine homologue each have a ubiquitous tissue distribution and are expressed early in development at the blastocyst stage, During murine embryonic development, NAT is expressed in the developing neural tube. The proposed endogenous role of NAT in folate metabolism, and its multi-allelic nature, indicate that its role in development should be assessed further.

Functional analysis, using in vitro mutagenesis, of amino acids located in the phenylalanine hydroxylase active site

The 3-dimensionaI structure determination of rat phenylalanine hydroxylase (PAH) has identified potentially important amino acids lining the active site cleft with the majority of these having hydrophobic side-chains including several with aromatic side chains. Here we have analyzed the effect on rat PAH enzyme kinetics of in vitro mutagenesis of a number of these amino acids lining the PAH active site. Mutation of F299, Y324, F331, and Y343 caused a significant decrease in enzyme activity but no change in the K-m for substrate or cofactor. me conclude that these aromatic residues are essential for activity but are not significantly involved in binding of the substrate or cofactor. in contrast the PAH mutant, S349T, showed an 18-fold increase in K-m for phenylalanine, showing the first functional evidence that this residue was binding at or near the phenylalanine binding site. This confirms the recently published model for the binding of phenylalanine to the PAH active site that postulated S349 interacts with the amino group on the main chain of the phenylalanine molecule. This result differs with that found for the equivalent mutation (S395T), in the closely related tyrosine hydroxylase, which had no effect on substrate K-m, showing that while the architecture of the two active sites are very similar the amino acids that bind to the respective substrates are different. (C) 2000 Academic Press.

Adsorption hysteresis and criticality in regular mesoporous materials

In the present work, various theories predicting the critical diameter for the absence of capillary condensation and hysteresis are applied to experimental adsorption isotherms of vapors on regular mesoporous materials. Among the various theories studied, the tensile strength approximation proposed by the authors was found to be the most successful. Reversibility of nitrogen adsorption at 77.4 K was studied on pure MCM-41 of various pore sizes, as well as mixtures of pure MCM-41 samples in a 1:1 ratio. The results of PSD and hysteresis on MCM-41 mixtures are close to that expected from studies of the pure materials. The estimates of hysteresis critical temperature and diameter of MCM-41, HMS, FSM and KIT materials are also provided.

Functional significance of the beta-hairpin in the insecticidal neurotoxin omega-atracotoxin-Hv1a

omega -Atracotoxin-Hv1a is an insect-specific neurotoxin whose phylogenetic specificity derives from its ability to antagonize insect, but not vertebrate, voltage-gated calcium channels. In order to help understand its mechanism of action and to enhance its utility as a lead compound for insecticide development, we used a combination of protein engineering and site-directed mutagenesis to probe the toxin for key functional regions. First, we constructed a Hairpinless mutant in which the C-terminal beta -hairpin, which is highly conserved in this family of neurotoxins, was excised without affecting the fold of the residual disulfide-rich core of the toxin. The Hairpinless mutant was devoid of insecticidal activity, indicating the functional importance of the hairpin. We subsequently developed a highly efficient system for production of recombinant toxin and then probed the hairpin for key functional residues using alanine-scanning mutagenesis followed by a second round of mutagenesis based on initial hits from the alanine scan. This revealed that two spatially proximal residues, Asn(27) and Arg(35), form a contiguous molecular surface that is essential for toxin activity. We propose that this surface of the beta -hairpin is a key site for interaction of the toxin with insect calcium channels.

Energy and averages in the mechanics of granular materials

We derive a general thermo-mechanical theory for particulate materials consisting of granules of arbitrary whose material points possess three translational and three independent rotational degrees of freedom. Additional field variables are the translational and rotational granular temperatures, the kinetic energies shape and size. The kinematics of granulate is described within the framework of a polar continuum theory of the velocity and spin fluctuations respectively and the usual thermodynamic temperature. We distinguish between averages over particle categories (averages in mass/velocity and moment of inertia/spin space, respectively) and particle phases where the average extends over distinct subsets of particle categories (multi phase flows). The relationship between the thermal energy in the granular system and phonon energy in a molecular system is briefly discussed in the main body of the paper and discussed in detail in the Appendix A. (C) 2001 Elsevier Science B.V. All rights reserved.