Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Estenose Intra-Stent na Artéria Femoral Superficial: Soluções Actuais Para um Problema Crescente

Os últimos anos de tratamento da doença arterial obstrutiva periférica na artéria femoral superficial observaram uma mudança de paradigma, da cirurgia clássica para a endovascular, o que se traduziu na utilização progressiva de stents metálicos para a manutenção da permeabilidade a longo prazo. Apesar dos avanços tecnológicos, a restenose intra-stent é uma das principais limitações do tratamento endovascular, com um tratamento complexo e não consensual, traduzindo a escassez de resultados obtidos ou a sua manutenção no tempo. Os autores procuraram recolher os dados mais recentes sobre este tipo de patologia e as principais opções disponíveis para o seu tratamento.

Laser solar de Nd: YAG bombeado por guias de onda

São propostas novas cavidades de bombeamento para lasers solares do estado sólido de Nd: YAG com o objectivo de melhorar a potência laser de saída e eficiência de bombeamento. São implementados quatro sistemas de guias de onda, um dos sistemas é simétrico e bombeado lateralmente, sendo os restantes três sistemas bombeados lateralmente e pela extremidade. A influência da geometria dos guias de onda no desempenho do bombeamento, o perfil do feixe à saída dos guias e a absorção por parte do cristal de Nd:YAG são optimizados minuciosamente, sendo modelados através do software Zemax. A cavidade de ressonância e as características do feixe são modelados em Lascad. Construíram-se e testaram-se três guias de onda de secção, octogonal, cilíndrica e quadrada. A potência laser multimodo para o sistema ótico bombeado por guia de onda cilíndrica de 20mm de diâmetro e concentrador cónico, foi de 21W, representando uma eficiência de colecção de 11.6W/m2, apresentando um erro de colecção para ΔX=1.3mm de 4.4%.

Characterization of an OPCPA laser amplifier based on the nonlinear crystal YCOB

The work described in this thesis was performed at the Laboratory for Intense Lasers (L2I) of Instituto Superior Técnico, University of Lisbon (IST-UL). Its main contribution consists in the feasibility study of the broadband dispersive stages for an optical parametric chirped pulse amplifier based on the nonlinear crystal yttrium calcium oxi-borate (YCOB). In particular, the main goal of this work consisted in the characterization and implementation of the several optical devices involved in pulse expansion and compression of the amplified pulses to durations of the order of a few optical cycles (20 fs). This type of laser systems find application in fields such as medicine, telecommunications and machining, which require high energy, ultrashort (sub-100 fs) pulses. The main challenges consisted in the preliminary study of the performance of the broadband amplifier, which is essential for successfully handling pulses with bandwidths exceeding 100 nm when amplified from the μJ to 20 mJ per pulse. In general, the control, manipulation and characterization of optical phenomena on the scale of a few tens of fs and powers that can reach the PW level are extremely difficult and challenging due to the complexity of the phenomena of radiation-matter interaction and their nonlinearities, observed at this time scale and power level. For this purpose the main dispersive components were characterized in detail, specifically addressing the demonstration of pulse expansion and compression. The tested bandwidths are narrower than the final ones, in order to confirm the parameters of these elements and predict the performance for the broadband pulses. The work performed led to additional tasks such as a detailed characterization of laser oscillator seeding the laser chain and the detection and cancelling of additional sources of dispersion.

Sistema de gestão de energia renovável para autoconsumo

A procura crescente de energia ao longo do tempo, e também o seu custo, tem estimulado a procura de novas formas de geração ou aproveitamento energético, donde se pode destacar a geração de energia eléctrica para autoconsumo. À semelhança de já muitos países aderentes aos sistemas de autoconsumo, Portugal também já tem legislação que permite a utilização deste tipo de sistemas através de Unidades de Produção para Autoconsumo (UPAC). Este tipo de sistemas trazem consigo vantagens tanto para o produtor, que produz a sua própria energia e assim poderá ter algum retorno financeiro, como também para a rede eléctrica nacional (RESP) que, mercê da disponibilidade de mais fontes de energia, tem a possibilidade de ficar menos sobrecarregada em períodos de ponta. Com o intuito de aproveitar ao máximo a energia produzida para autoconsumo e evitar estar a utilizar energia da rede em períodos em que a energia produzida não consegue dar resposta à procura, este trabalho propõe-se a optimizar os níveis de autoconsumo destes sistemas, que no geral apresentam valores entre os 20% e 40% anuais no sector residencial. Deste modo, e de acordo com o que é definido por Demand-Side Management (DSM) será desenvolvido neste trabalho de dissertação um projecto deste tipo, que consiste na monitorização e gestão da energia produzida numa habitação ou indústria. O desenvolvimento deste projecto assenta na criação de um sistema de autoconsumo, constituído por um painel fotovoltaico, sensores, actuadores e uma carga, assim como hardware que permitirá monitorizar, de forma remota, as condições de funcionamento do sistema e fazer a gestão de energia do mesmo, de forma remota, recorrendo para isso às tecnologias de Informação e Comunicação. As aplicações de software responsáveis por essa gestão serão desenvolvidas com recurso à linguagem JAVA e Arduino Programming Language. Será utilizado um módulo Wi-Fi que permitirá a troca de dados entre Cliente (Arduino UNO com Microchip RN-171-XV) e Servidor (Aplicação em JAVA presente num computador). No final serão analisados os levantamentos de energia produzida e avaliado se o controlo de cargas é feito consoante as melhores condições de aproveitamento da energia produzida.

Effect of the acoustic impedance in ultrasonic emitter transducers using digital modulations

In an underwater environment it is difficult to implement solutions for wireless communications. The existing technologies using electromagnetic waves or lasers are not very efficient due to the large attenuation in the aquatic environment. Ultrasound reveals a lower attenuation, and thus has been used in underwater long-distance communications. The much slower speed of acoustic propagation in water (about 1500 m/s) compared with that of electromagnetic and optical waves, is another limiting factor for efficient communication and networking. For high data-rates and real-time applications it is necessary to use frequencies in the MHz range, allowing communication distances of hundreds of meters with a delay of milliseconds. To achieve this goal, it is necessary to develop ultrasound transducers able to work at high frequencies and wideband, with suitable responses to digital modulations. This work shows how the acoustic impedance influences the performance of an ultrasonic emitter transducer when digital modulations are used and operating at frequencies between 100 kHz and 1 MHz. The study includes a Finite Element Method (FEM) and a MATLAB/Simulink simulation with an experimental validation to evaluate two types of piezoelectric materials: one based on ceramics (high acoustic impedance) with a resonance design and the other based in polymer (low acoustic impedance) designed to optimize the performance when digital modulations are used. The transducers performance for Binary Amplitude Shift Keying (BASK), On-Off Keying (OOK), Binary Phase Shift Keying (BPSK) and Binary Frequency Shift Keying (BFSK) modulations with a 1 MHz carrier at 125 kbps baud rate are compared.

Fabricació de Lents Zonals de Fresnel per aplicació als raigs X tous

Estudi elaborat a partir d’una estada al Paul Scherrer Institut del Maig a l’Octubre del 2006 amb l’ajuda i supervisió dels Dr. Konstantins Jefimovs i Dr. Christian David. Focalitzar raigs X tous és una necessitat essencial per al microanàlisis, la microscopia, i fer imatges en moltes Instal·lacions de Radiació Sincrotró. Les Lents Zonals de Fresnel (FZP, de la denominació anglesa “Fresnel Zone Plates”) han demostrat donar uns punts focals amb una resolució espacial destacada i una baixa il·luminació de fons. Tanmateix, la fabricació de FZP és complexa i no totalment reproduïble. A més a més, el temps de vida de les FZP és força curt, ja que estant situades sobre membranes de nitrur de silici molt fines i altament absorbents. Per tant, hem fet esforços per implementar FZP de silici, que s’espera que siguin més resistents. L’element està fet d’una oblia de cristall de silici poc absorbent, i no presenta cap interfase entre materials. Així doncs, aquestes lents són especialment adequades per a aguantar les extremes càrregues de radiació de les fonts de raigs X més brillants. Particularment, això és molt important per a les aplicacions a les pròximes generacions de fonts de raigs X, com els Làsers d’Electrons Lliures (FEL, de la denominació anglesa “Free Electron Laser”). El silici també garanteix que no hi hagi cap banda d’absorció en el rang d’energies de la finestra de l’aigua (200-520 eV), fent aquestes lents ideals per a fer imatges de mostres biològiques. En aquest informe, hi ha una descripció detallada de tots els passos involucrats en la fabricació de les Lents Zonals de Fresnel de silici. En resum, les estructures de FZP es modelen sobre una resina utilitzant litografia per feix d’electrons i llavors el patró es transmet al silici mitjançant un gravat d’ions reactius (RIE, de la denominació anglesa ‘Reactive Ion Etching’) utilitzant una fina (20 nm) màscara de Crintermitja. Les membranes de silici es poden aprimar després de la fabricació de les estructures per a garantir una transmissió suficient fins i tot a baixes energies. Aquest informe també inclou l’anàlisi i la discussió d’alguns experiments preliminars per avaluar el rendiment de les Si FZPs fets a la línia de llum PolLux del Swiss Ligth Source amb l’ajuda dels Dr. Jörg Raabe i Dr. George Tzvetkov.

Does abdominoplasty with liposuction of the love handles yield a shorter scar? An analysis with abdominal 3D laser scanning.

The aim of this study was to evaluate the combination of abdominoplasty with liposuction of both flanks with regards to length of scar, complications, and patient's satisfaction. A retrospective analysis of 35 patients who underwent esthetic abdominoplasty at our institution between 2002 and 2004 was performed. Thirteen patients underwent abdominoplasty with liposuction of both flanks, 22 patients underwent conventional abdominoplasty. Liposuction of the flanks did not increase the rate of complications of the abdominoplasty procedures. We found a tendency toward shorter scars in patients who underwent abdominoplasty combined with liposuction of the flanks. Implementation of 3-dimensional laser surface scanning to objectify the postoperative outcomes, documented a comparable degree of flatness of the achieved body contouring in both procedures. 3-dimensional laser surface scanning can be a valuable tool to objectify assessment of postoperative results.

The Discrimination of Colored Acrylic, Cotton, and Wool Textile Fibers Using Micro-Raman Spectroscopy. Part 1 : In Situ Detection and Characterization of Dyes

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633-nm laser did not provide Raman information. The 514-nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830-nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength.

Separation of free amino acids in human plasma by capillary electrophoresis with laser induced fluorescence: potential for emergency diagnosis of inborn errors of metabolism.

Free amino acids (AAs) in human plasma are derivatized with 3-(4-carboxybenzoyl)quinoline-2-carboxaldehyde (CBQCA) and analyzed by capillary electrophoresis (CE) with laser induced fluorescence (LIF) detection. The labeling procedure is significantly improved over results reported previously. Derivatization can be completed in 40 min, with concentrations as low as 4 x 10(-8) M successfully labeled in favourable cases. Twenty-nine AAs (including 2 internal standards) are identified and can be reproducibly separated in 70 min. Migration time RSD values for 23 of these AAs were calculated and found in the range from 0.5 to 4%. The rapid derivatization procedure and the resolution obtained in the separation are sufficient for a semi-quantitative, emergency diagnosis of several inborn errors of metabolism (IEM). Amino acid profiles for both normal donor plasma samples and plasma samples of patients suffering from phenylketonuria, tyrosinemia, maple syrup urinary disease, hyperornithinemia, and citrullinemia are studied.

Instrumentació i control d'actuadors fluídics per a sistemes analítics: sistema de regulació d'una microbomba de precisió a mode de xeringa

En aquest projecte s’ha implementat un sistema de control per a les bombes microfluídiques LPVX de The Lee Company funcionant a mode de xeringa. El sistema consisteix en un circuit controlador basat en el microxip UDN 296 B de Allegro MicroSystems, que conté dos Ponts en H per a controlar motors pas a pas i dos mòduls de Modulació d’Amplada de Polsos (PWM), governat a partir d’un programa de control com a instrument virtual dissenyat sota l’entorn LabVIEW. El programa de control permet indicar la quantitat de volum a aspirar o dispensar per la bomba i escollir entre una execució simple o una de continuada, podent-ne controlar en aquest segona opció el temps entre execució i execució. El programa també permet visualitzar el procés mitjançant la obtenció de la imatge d’una webcam amb DirectShow. Finalment també permet el control remot de l’Instrument Virtual a través de la xarxa d’Internet.

Noninvasive imaging of 5-HT3 receptor trafficking in live cells: from biosynthesis to endocytosis.

Sequential stages in the life cycle of the ionotropic 5-HT(3) receptor (5-HT(3)R) were resolved temporally and spatially in live cells by multicolor fluorescence confocal microscopy. The insertion of the enhanced cyan fluorescent protein into the large intracellular loop delivered a fluorescent 5-HT(3)R fully functional in terms of ligand binding specificity and channel activity, which allowed for the first time a complete real-time visualization and documentation of intracellular biogenesis, membrane targeting, and ligand-mediated internalization of a receptor belonging to the ligand-gated ion channel superfamily. Fluorescence signals of newly expressed receptors were detectable in the endoplasmic reticulum about 3 h after transfection onset. At this stage receptor subunits assembled to form active ligand binding sites as demonstrated in situ by binding of a fluorescent 5-HT(3)R-specific antagonist. After novel protein synthesis was chemically blocked, the 5-HT(3) R populations in the endoplasmic reticulum and Golgi cisternae moved virtually quantitatively to the cell surface, indicating efficient receptor folding and assembly. Intracellular 5-HT(3) receptors were trafficking in vesicle-like structures along microtubules to the cell surface at a velocity generally below 1 mum/s and were inserted into the plasma membrane in a characteristic cluster distribution overlapping with actin-rich domains. Internalization of cell surface 5-HT(3) receptors was observed within minutes after exposure to an extracellular agonist. Our orchestrated use of spectrally distinguishable fluorescent labels for the receptor, its cognate ligand, and specific organelle markers can be regarded as a general approach allowing subcellular insights into dynamic processes of membrane receptor trafficking.

Photodynamic induced uptake of liposomal doxorubicin to rat lung tumors parallels tumor vascular density.

BACKGROUND: Visudyne®-mediated photodynamic therapy (PDT) at low drug/light conditions has shown to selectively enhance the uptake of liposomal doxorubicin in subpleural localized sarcoma tumors grown on rodent lungs without causing morphological alterations of the lung. The present experiments explore the impact of low-dose PDT on liposomal doxorubicin (Liporubicin™) uptake to different tumor types grown on rodent lungs. MATERIAL AND METHODS: Three groups of Fischer rats underwent subpleural generation of sarcoma, mesothelioma, or adenocarcinoma tumors on the left lung. At least five animals of each group (sarcoma, n = 5; mesothelioma, n = 7; adenocarcinoma, n = 5) underwent intraoperative low-dose (10 J/cm(2) at 35 mW/cm(2) ) PDT with 0.0625 mg/kg Visudyne® of the tumor and the lower lobe. This was followed by intravenous (IV) administration of 400 µg Liporubicin™. After a circulation time of 60 min, the tumor-bearing lung was processed for HPLC analyses. At least five animals per group underwent the same procedure but without PDT (sarcoma, n = 5; mesothelioma, n = 5; adenocarcinoma, n = 6). Five untreated animals per group underwent CD31 immunostaining of their tumors with histomorphometrical assessment of the tumor vascularization. RESULTS: Low-dose PDT significantly enhanced Liporubicin™ uptake to all tumor types (sarcoma, P = 0.0007; mesothelioma, P = 0.001; adenocarcinoma, P = 0.02) but not to normal lung tissue compared to IV drug administration alone. PDT led to a significantly increased ratio of tumor to lung tissue drug uptake for all three tumor types (P < 0.05). However, the tumor drug uptake varied between tumor types and paralleled tumor vascular density. The vascular density was significantly higher in sarcoma than in adenocarcinoma (P < 0.001) and mesothelioma (P < 0.001), whereas there was no significant difference between adenocarcinoma and mesothelioma. CONCLUSION: Low-dose Visudyne®-mediated PDT selectively enhances the uptake of systemically administered liposomal doxorubicin in tumors without affecting the drug uptake to normal lung. However, drug uptake varied significantly between tumor types and paralleled tumor vascular density.

Dermatologie esthétique et correctrice: applications cliniques et rôle social [Esthetic and corrective dermatology: clinical applications and social role].

Skin diseases may have severe aesthetic and psychological repercussions leading sometimes to discriminations and social isolation. Dermatologists have contributed to the development of many cosmetic procedures: peelings, botulinum toxin or hyaluronic acid injections, lasers, blepharoplasty, facelift, etc. Many of these treatments have interesting clinical applications and may help numerous patients with skin diseases to return to a normal social life.

Comparison of the efficacy and longevity of nonpenetrating glaucoma surgery with and without a new, nonabsorbable hydrophilic implant.

BACKGROUND AND OBJECTIVE: To compare the efficacy and longevity of nonpenetrating glaucoma surgery with and without the use of a nonabsorbable hydrophilic implant at the Oxford Eye Centre, Johannesburg, South Africa, and the Glaucoma Unit, Jules Gonin Ophthalmic Hospital, Lausanne, Switzerland. PATIENTS AND METHODS: In a nonrandomized, prospective study between March 1997 and December 2001, 48 eyes of 32 patients aged 18 to 86 years with primary open-angle glaucoma underwent nonpenetrating glaucoma surgery; 25 eyes with the implant and 23 eyes without it. Intraocular pressure (IOP) was recorded preoperatively and postoperatively at 1, 7, and 14 days, at 1, 3, and 6 months, and thereafter every 6 months. RESULTS: The mean preoperative IOP was 27.5 +/- 11.8 mm Hg (range, 20 to 64 mm Hg) in the implant group and 24.8 +/- 7.1 mm Hg (range, 16 to 38 mm Hg) in the control group. During the first 18 months of follow-up, both groups showed identical IOP progression and the mean IOP remained less than 14 mm Hg. After 2 years of follow-up, the IOP started to rise in the control group but remained stable in the implant group. After 30 months, the mean IOP was 12.4 +/- 2 mm Hg and the IOP decrease in percentage was 62% +/- 6% in the implant group (n = 13) versus 16.1 +/- 3 mm Hg and 34% +/- 13% in the control group (n = 15) (mean IOP, P = .0022; mean IOP decrease in percentage, P = .01). CONCLUSIONS: During the first 18 months, there was no difference in the outcomes between the two groups. After 2 years of follow-up, the mean IOP was lower and the IOP decrease in percentage was greater in the implant group compared with the control group.