Monte-Carlo dosimetry on a realistic cell monolayer geometry exposed to alpha particles

The energy and specific energy absorbed in the main cell compartments (nucleus and cytoplasm) in typical radiobiology experiments are usually estimated by calculations as they are not accessible for a direct measurement. In most of the work, the cell geometry is modelled using the combination of simple mathematical volumes. We propose a method based on high resolution confocal imaging and ion beam analysis (IBA) in order to import realistic cell nuclei geometries in Monte-Carlo simulations and thus take into account the variety of different geometries encountered in a typical cell population. Seventy-six cell nuclei have been imaged using confocal microscopy and their chemical composition has been measured using IBA. A cellular phantom was created from these data using the ImageJ image analysis software and imported in the Geant4 Monte-Carlo simulation toolkit. Total energy and specific energy distributions in the 76 cell nuclei have been calculated for two types of irradiation protocols: a 3 MeV alpha particle microbeam used for targeted irradiation and a 239Pu alpha source used for large angle random irradiation. Qualitative images of the energy deposited along the particle tracks have been produced and show good agreement with images of DNA double strand break signalling proteins obtained experimentally. The methodology presented in this paper provides microdosimetric quantities calculated from realistic cellular volumes. It is based on open-source oriented software that is publicly available.

Magneto-optic current sensor with Faraday mirror for linear birefringence compensation

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Sensor magneto-óptico de corriente con supresión de birrefringencia lineal mediante espejo de Faraday

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Sonophone: Desarrollo y evaluación de un sonómetro profesional para iOS

La medida de la presión sonora es un proceso de extrema importancia para la ingeniería acústica, de aplicación en numerosas áreas de esta disciplina, como la acústica arquitectónica o el control de ruido. Sobre todo en esta última, es necesario poder efectuar medidas precisas en condiciones muy diversas. Por otra parte, la ubicuidad de los dispositivos móviles inteligentes (smartphones, tabletas, etc.), dispositivos que integran potencia de procesado, conectividad, interactividad y una interfaz intuitiva en un tamaño reducido, abre la posibilidad de su uso como sistemas de medida de calidad y de coste bajo. En este Proyecto se pretende utilizar las capacidades de entrada y salida, procesado, conectividad inalámbrica y geolocalización de los dispositivos móviles basados en iOS, en concreto el iPhone, para implementar un sistema de medidas acústicas que iguale o supere las prestaciones de los sonómetros existentes en el mercado. SonoPhone permitirá, mediante la conexión de un micrófono de medida adecuado, la realización de medidas de acuerdo a las normas técnicas en vigor, así como la posibilidad de programar, configurar y almacenar o trasmitir las medidas realizadas, que además estarán geolocalizadas con el GPS integrado en el dispositivo móvil. También se permitirá enviar los datos de la medida a un almacenamiento remoto en la nube. La aplicación tiene una estructura modular en la que un módulo de adquisición de datos lee la señal del micrófono, un back-end efectúa el procesado necesario, y otros módulos permiten la calibración del dispositivo y programar y configurar las medidas, así como su almacenamiento y transmisión en red. Una interfaz de usuario (GUI) permite visualizar las medidas y efectuar las configuraciones deseadas por el usuario, todo ello en tiempo real. Además de implementar la aplicación, se ha realizado una prueba de funcionamiento para determinar si el hardware del iPhone es adecuado para la medida de la presión acústica de acuerdo a las normas internacionales. Sound pressure measurement is an extremely important process in the field of acoustic engineering, with applications in numerous subfields, like for instance building acoustics and noise control, where it is necessary to be able to accurately measure sound pressure in very diverse (and sometimes adverse) conditions. On the other hand, the growing ubiquity of mobile devices such as smartphones or tablets, which combine processing power, connectivity, interactivity and an intuitive interface in a small size, makes it possible to use these devices as quality low-cost measurement systems. This Project aims to use the input-output capabilities of iOS-based mobile devices, in particular the iPhone, together with their processing power, wireless connectivity and geolocation features, to implement an acoustic measurement system that rivals the performance of existing devices. SonoPhone allows, with the addition of an adequate measurement microphone, to carry out measurements that comply with current technical regulations, as well as programming, configuring, storing and transmitting the results of the measurement. These measurements will be geolocated using the integrated GPS, and can be transmitted effortlessly to a remote cloud storage. The application is structured in modular fashion. A data acquisition module reads the signal from the microphone, while a back-end module carries out the necessary processing. Other modules permit the device to be calibrated, or control the configuration of the measurement and its storage or transmission. A Graphical User Interface (GUI) allows visual feedback on the measurement in progress, and provides the user with real-time control over the measurement parameters. Not only an application has been developed; a laboratory test was carried out with the goal of determining if the hardware of the iPhone permits the whole system to comply with international regulations regarding sound level meters.

Fruit by fruit identification of mealy peaches. Extraction of storage features.

Mealiness is a negative attribute of sensory texture, characterised by the lack of juiciness decrease in the total amount of of water content of tissues. Peach mealy textures are known as \ and leatheriness. Besides the lack of juiciness and flavour, that characterises mealy fruits, in associated with internal browning near the stone and an incapacity of ripening although there i ripe appearance. It is considered as a physiological disorder that appears in stone fruits probably < unbalanced pectolitic enzyme activity during storage. Since January 1996, a wide EC Project entitled: "Mealiness in fruits. Consumer perception and i detection" is being carried out. Within it, the Physical Properties Laboratory (ETSIA-UPM) working to develop instrumental procedures to detect mealiness in different types of fruits (s contributions by Barreiro to AgEng). The results obtained have shown to correlate well with \ measurements in apples (Barreiro et al), also we have succeeded in identifying individual mealy j the basis of instrumental measurement in peaches. The definition of these texture categories will be used in further studies as a base for new individual classification.

Sistema de adquisición NetdB aplicado a prácticas de acústica arquitectónica : herramienta OneNote 2010

Este proyecto está dividido en dos partes, una de ellas dedicada al estudio del sistema de adquisición NetdB y su aplicación a prácticas de Acústica Arquitectónica y la otra dedicada a la evaluación de la herramienta OneNote 2010 y su aplicación al proceso enseñanza – aprendizaje. Se estructura en cinco secciones bien definidas que se comentan a continuación: La primera sección, fundamentos teóricos, se centrará en explicar los distintos parámetros medidos y su relación con la acústica. Para ello se definirán los conceptos teóricos básicos que ayudarán al seguimiento del proyecto en su totalidad. La segunda sección está dedicada al sistema de adquisición NetdB, y en ella se explican sus características, el conexionado del equipo y la configuración del mismo con el software dBBati. En la tercera sección se describen las medidas realizadas con el sistema de adquisición NetdB, basadas en la normativa nacional e internacional vigente. Estas medidas son: - Medición del tiempo de reverberación en recintos ordinarios, según la Norma UNE-EN ISO 3382-2. - Medición del coeficiente de absorción sonora en cámara reverberante, según la Norma UNE-EN ISO 354. - Medición “in situ” del aislamiento a ruido aéreo, según las normas UNE-EN ISO 140-4 y UNE-EN ISO 717-1. En cada una de las medidas se describe el objetivo, los equipos utilizados, la conexión entre los distintos equipos, el ensayo realizado según la norma correspondiente, los cálculos y resultados obtenidos y las conclusiones finales de la medida. En la cuarta sección se describe la herramienta OneNote 2010, detallándose su estructura, configuración y la evaluación de su aplicación al proceso enseñanza – aprendizaje. Por último, se darán unas conclusiones finales, en las que se recapitularán los resultados de las valoraciones obtenidos durante la realización del proyecto. ABSTRACT. This project is divided into two parts, one of them dealing with the study of NetdB acquisition system and its application on Architectural Acoustics practices and the other dedicated to the evaluation of the OneNote 2010 tool and its application on the teaching-learning process. The structure of the project consists of five clearly defined sections as stated hereunder: 1. Theoretical fundamentals, based on the explanation of the different parameters subject to measurement and their relation to acoustics. To this end, basic theoretical concepts will be clearly defined, which will help the follow-up of the project as a whole. 2. NetdB acquisition system: whereby features will be clearly defined, as well as the equipment connection and its configuration within the dBBati software. 3. Description of the measures carried out on the NetdB acquisition system under current regulations both national and international, being those measures as follows: - Reverberation Time measurement in ordinary premises, according to the UNE-EN ISO 3382-2 standard. - Sound absorption ratio measurement in reverberating chamber, according to the UNE-EN ISO 354 standard. - “In situ” sound proofing air traffic, according to UNE-EN ISO 140-4 and UNE-EN ISO 717-1 standards. Each of the measures stated above comprises the description of the following issues: its aim, the equipment in use, the connection among different equipment, the test carried out under the corresponding standard, the calculations and results obtained and finally the conclusions reached at. 4. OneNote 2010 tool: full description detailing its structure, configuration as well as the evaluation of its application on the teaching-learning process. Finally, the report will give the final conclusions by means of recapitulating the results of the different assessments obtained along the process.

Datos de precisión en la evaluación del ruido transmitido al interior de una habitación según el Real Decreto 1367/2007

El objetivo del presente trabajo es realizar una evaluación realista de la incertidumbre en los ensayos de ruido transmitido al interior de una sala según el Anexo IV del Real Decreto 1367/2007, contemplando todas las posibles causas que intervienen en la incertidumbre de forma que las imprecisiones observadas en los ejercicios de intercomparación se cubran con un único ensayo. Otra parte fundamental del trabajo es cuantificar la fuente de incertidumbre generada en la elección del punto de medición. En primer lugar se realiza la medición del nivel continuo equivalente ponderado A en habitaciones de distinto tamaño, a la que llegan los distintos tipos de ruido emitido desde el exterior de las mismas. El siguiente paso es realizar un análisis de los niveles medidos, tanto en su distribución espacial como en su evolución temporal, incidiendo en los valores máximos, LAeq,5s. A continuación se comprueba si la distribución de los niveles medidos se ajusta a una distribución normal mediante el software de análisis estadístico STATGRAPHICS. Determinando, en base al tamaño de las muestras escogidas, por medio de análisis estadísticos, la aportación a la incertidumbre generada en la elección del punto de medida, cuantificando su valor. Por último se realiza una medición del ruido de actividades según el Real Decreto 1367/2007, aportando una evaluación de la incertidumbre, teniendo en cuenta todas las fuentes que la generan, mediante el enfoque clásico de la GUM. ABSTRACT. The objective of this work is to carry out a realistic assessment of the uncertainty in the trials of noise transmitted into the interior of a room according to Annex IV of the Royal Decree 136772997, considering all of the causes involved in uncertainty in such a way that the inaccuracies observed in intercomparison exercises are covered with a single trial. Another fundamental part of the work is to quantify the source of uncertainty in the choice of the point of measurement. First is the weighted equivalent of the continuous level measurement in rooms of different sizes, which reach different types of noise emitted from outside of them. The next step is to perform an analysis of the measured levels, both in their spatial distribution and their temporal evolution, influencing the maximum values, LAeq,5s. Then it is checked to see whether the distribution of the measured levels conforms to a normal distribution using the STATGRAPHICS statistical analysis software. Determining therefore, based on the size of the selected samples, through statistical analysis, the contribution to the uncertainty generated in the choice of the measurement point, quantifying its value. At last is the measure of the noise of activities according to the Royal Decree 1367/2007, providing an assessment of the uncertainty, taking into account all sources that generate it, using the classical approach to the GUM.

Estudio acústico del auditorio Rafael Frühbeck, Burgos

El presente proyecto desarrolla un estudio acústico del recinto: Auditorio Rafael Frühbeck de Burgos, cumpliendo con las indicaciones exigidas por la norma UNE-EN ISO 3382-1: 2010, “Medición de parámetros acústicos en recintos, Parte 1: Salas de Espectáculos”. Se desarrollan dos estudios acústicos sobre el mismo recinto. En el primero de ellos, el recinto está configurado para la realización de eventos tales como conferencias o congresos, donde la inteligibilidad de la palabra es un factor determinante. En el segundo estudio, el recinto se configura para espectáculos musicales como conciertos de orquesta sinfónica o música de cámara. En esta configuración, la palabra ya no es tan determinante como la correcta interpretación y disfrute de la música por parte de la audiencia. Para ambas configuraciones del recinto se ha realizado un procesado estadístico de los datos con el fin de obtener un valor único de cada parámetro acústico estudiado. De esta forma, se comparan los resultados para ambas configuraciones, y se evalúan los valores obtenidos de cada uno de los parámetros acústicos con el fin de conocer si se adecuan a las necesidades acústicas exigidas por el tipo de evento desarrollado. Además, se ha construido un modelo geométrico del recinto por ordenador, para ambas configuraciones acústicas, haciendo uso del software profesional de predicción y simulación acústica EASE. Se realiza un estudio acústico sobre el modelo geométrico mediante simulación, siguiendo las pautas llevadas a cabo durante la medición “in situ”. Los resultados obtenidos por simulación se comparan con los obtenidos de las mediciones “in situ”, para estudiar la validación del modelo geométrico. El parámetro acústico elegido para validar el modelo, en un primer momento, será el tiempo de reverberación. Si se consigue una buena validación del modelo geométrico, este puede ser utilizado para realizar predicciones acústicas mediante simulación, cuando un sistema de refuerzo sonoro sea utilizado dentro del recinto. El sistema de refuerzo sonoro ubicado en el recinto sometido a estudio, no ha sido utilizado en el presente proyecto. ABSTRACT. The present projects carry out an acoustic study of enclosure: Rafael Frühbeck Concert Hall, in Burgos, fulfilling the indications demanded by the standard UNE-EN ISO 3382-1:2010 “Measurement of room acoustic parameters – Part 1: Performance spaces. Two acoustics studies are developed on the same enclosure. In first of them, the enclosure is formed for the accomplishment of events such as conferences or congresses, where speech intelligibility is a determining factor. In the second study, the enclosure forms for musical performances like concerts of symphony orchestra or chamber music. In this acoustic configuration, speech intelligibility is not as determining as the correct interpretation and enjoyment of music in audience areas. For both configurations of the enclosure, a statistical processing of the data has been realised with the purpose of obtaining a unique value of each studied acoustic parameter. In this way, the results for both configurations are compared, and the obtained values of each one of the acoustic parameters are evaluated with the purpose of knowing if they are adapted to the acoustic needs demanded by the type of developed event. In addition, a geometric model of the enclosure has been constructed by computer, for both acoustic configurations; making use of the professional software of prediction and acoustical simulation, EASE. An acoustic study is developed on the geometric model by means of simulation, following the rules carried out during the measurement “in situ”. The results obtained by simulation are compared with the obtained ones from the measurement “in situ”, to study the validation of the geometric model. Initially the acoustic parameter chosen to validate the model is Reverberation Time. If a good validation of the geometric model is reached, it can be used to realize acoustic predictions by simulation, when a sound reinforcement system is used within the enclosure. The sound reinforcement system located in the enclosure under study has not been used in the present project.

Estudio acústico de la iglesia de San Sebastián de Alcorisa (Teruel). Comparación de resultados obtenidos a partir de planos anteriores y posteriores a la reforma y propuesta de soluciones

En el presente trabajo se ha realizado un estudio acústico de la Iglesia de San Sebastián de Alcorisa (Teruel). La finalidad del trabajo es averiguar cómo afectó a la acústica del recinto la reforma que se llevó a cabo en el año 2001, la cual adecuó la nave principal como sala de conciertos y conferencias. Además de esto se propondrán posibles mejoras acústicas para el recinto. Para llevar a cabo dicho estudio se ha utilizado el proyecto de restauración de dicha iglesia, firmado por la empresa mmt,S.L en enero de 2001. A partir de los planos de este proyecto se han construido dos modelos en tres dimensiones de la sala (uno anterior a la reforma y otro posterior) con los que se ha hecho una simulación acústica. La simulación del recinto actual ha sido ajustada a partir de las medidas acústicas llevadas a cabo in-situ, de tal forma que las soluciones acústicas que se integren al modelo se comporten de una forma lo más realista posible. Además de las soluciones acústicas a nivel arquitectónico, se propondrá un sistema de sonorización que permita un adecuado uso del recinto como sala de conciertos y conferencias. ABSTRACT. In the following thesis, an acoustic study of the church San Sebastian in Alcorisa (Teruel) has been made. The aim is to find how the reformation in 2001 affected or changed the acoustic characteristics of the concert and conference hall area. Moreover, suggestion for improvements will also be presented later in the work. To start the study, the restoration project of the church, which was signed by the company mmt, SL in January 2001 is used. Based on the maps found in this project, two and three dimensions models of the room have been built before and after the restoration, to use them in the acoustic simulation. The simulation of the area studied has been adjusted according to the measurement in site, which will help giving the most realistic result possible. In addition to the architectural acoustic solutions, a sound system is collocated so that the hall can be used for concerts and conferences.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital.

Medidas de dispersão de gás em células mecânicas industriais e seus condicionantes.

A qualidade da dispersão de gás em células de flotação é comumente caracterizada através de parâmetros como velocidade superficial do gás (Jg), hold-up do gás (?g), distribuição de tamanho de bolha (db ou D3,2) e fluxo de superfície de bolha (Sb). Sendo um processo de separação de minerais que é dependente da interação (colisão + adesão) entre partículas hidrofóbicas e bolhas de ar, a flotação tem seu desempenho dependente de uma dispersão de gás apropriada na polpa de minério. Desta forma, este trabalho objetivou caracterizar o estado da dispersão de gás de duas células em um banco composto por quatro células Wemco de 42,5 m³ (subaeradas), operando em série na usina da Vale Fertilizantes (Cajati-SP). Realizaram-se três campanhas de medidas que foram conduzidas sob diferentes condições operacionais: a) Diâmetro do rotor (D) de 1,09 m e rotação (N) entre 145 RPM e 175 RPM; b) D = 0,99 m e N entre 110 RPM e 190 RPM; c) D = 0,99 m e N de 120 RPM e de 130 RPM. Observaram-se os seguintes valores de dispersão de gás: 0,7 <= Jg <= 5,4 cm/s, 7 <= ?g <= 15%, 1,6 <= D3,2 <= 2,4 mm e Sb na faixa de 24 a 162 s-1. A magnitude de Jg medida na 1ª e 2ª campanhas mostrou-se acima dos valores reportados pela literatura, indicando necessidade de modificação de condições operacionais dos equipamentos, assim como cuidadosa manutenção. Posteriormente, a 3ª campanha indicou maior conformidade dos parâmetros de dispersão de gás em relação à literatura, constatando-se uma considerável melhora de desempenho do processo de flotação.

Developing Emotional Security Among Children Who Have Been Adopted

This study investigated the development of emotional security among 6-10 year old children who have been adopted by exposing them to an experimental condition during which they could engage with either a live dog or a robotic dog. The live dog was a certified therapy dog; the robotic dog was a FurReal® toy marketed by Hasbro as "Biscuit." Utilizing a mixed-method embedded experimental design, the experimental condition was intentionally structured to promote engagement between the participant and the dog or robot. 43 children who had been adopted from the child welfare system were randomly assigned to one of two groups. One group was exposed to a therapy dog (n=22), while another was exposed to the social robotic dog (n=21). The development of emotional security was targeted for measurement in this study using the "Reading the Mind in the Eyes Test," a test of social understanding that has been linked in the literature to oxytocin- a hormone premised to be a marker of the development of emotional security. Physiological anxiety was also measured as an indicator of emotional security using the Revised Child Manifest Anxiety Scale-2 (RCMAS-2). Both measures were administered before and after exposure to the experimental condition. A linear mixed-effect regression analysis showed that for boys only, there was a significant effect of engagement with either companion on social understanding (p<.01). Social understanding decreased as engagement increased. A second model indicated that for boys only, their history of animal cruelty had a significant effect on physiological anxiety (p<.05). If boys had an animal cruelty history, their anxiety was reduced after the exposure to either the dog or robot. Interpretations of the findings suggest that there are differences among children who have been adopted and have a history of animal cruelty that differentially influences their development of emotional security. Social work interventions designed for practice with children who have been adopted will need to assess the presence of these variations and develop appropriate treatment protocols.

The WOMAC knee and hip osteoarthritis indices: Development, validation, globafization and influence on the development of the AUSCAN hand osteoarthritis indices

Clinical measurement in both clinical research and clinical practice requires tools and techniques that are valid, reliable and responsive. Patient-centred self-reported measures provide opportunity to evaluate consequences of osteoarthritis, that are important and relevant to patients with the condition. The WOMAC and AUSCAN Indices are health status measurement questionnaires that are valid, reliable and responsive, easy to complete, simple to score and available in multiple language forms and scaling formats. They provide opportunities to capture patient relevant information, relating to the impact of interventions, in clinical research and clinical practice environments. WOMAC data have also contributed to the development of proposed definitions for responder criteria and state-attainment criteria in osteoarthritis.

Microphone and loudspeaker arrays for room acoustic measurements

A multichannel spherical speaker array allows, together with a spherical microphones array, the measurement of the MIMO (Multiple Input Multiple Output) acoustic impulse response of an environment capturing meaningful information about propagation of sound between source an receiver. The mathematical framework for extracting arbitrary directivity virtual microphones from real microphones array signals is recalled and the application of the same method to the speakers array to generate arbitrary directivity source is presented. A convenient solutions for the construction and calibration of speakers spherical array for measurement purposes is illustrated. The postprocessing technique developed to compute and visualize acoustic path between source and receiver from measured MIMO impulse response is discussed. Real word results from measurement in a small theater are shown.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS SÃO BERNARDO DO CAMPO

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital