Severed corticospinal axons recover electrophysiologic control of muscle activity after x-ray therapy in lesioned adult spinal cord.

Mechanical injury to the adult mammalian spinal cord results in permanent loss of structural integrity at the lesion site and of the brain-controlled function distal to the lesion. Some of these consequences were permanently averted by altering the cellular constituents at the lesion site with x-irradiation delivered within a critical time window after injury. We have reported in a separate article that x-irradiation of sectioned adult rat spinal cord resulted in restitution of structural continuity and regrowth of severed corticospinal axons across and deep into the distal stump. Here, we report that after x-ray therapy of the lesion site severed corticospinal axons of transected adult rat spinal cord recover electrophysiologic control of activity of hindlimb muscles innervated by motoneurons distal to the lesion. The degree of recovery of control of muscle activity was directly related to the degree of restitution of structural integrity. This restitution of electrophysiologic function implies that the regenerating corticospinal axons reestablish connectivity with neurons within the target field in the distal stump. Our data suggest that recovery of structural continuity is a sufficient condition for the axotomized corticospinal neurons to regain some of their disrupted function in cord regions distal to the lesion site.

Efficient induction of point mutations allowing recovery of specific locus mutations in zebrafish.

A technique is described that greatly increases the efficiency of recovering specific locus point mutations in zebrafish (Danio rerio). Founder individuals that were mosaic for point mutations were produced by mutagenizing postmeiotic gametes with the alkylating agent N-ethyl-N-nitrosourea. Under optimal conditions, each founder carried an average of 10 mutations affecting genes required for embryogenesis. Moreover, approximately 2% of these founders transmitted new mutations at any prespecified pigmentation locus. Analyses of new pigmentation mutations confirmed that most were likely to be point mutations. Thus, mutagenesis of postmeiotic gametes with N-ethyl-N-nitrosourea yielded frequencies of point mutations at specific loci that were 10- to 15-fold higher than previously achieved in zebrafish. Our procedure should, therefore, greatly facilitate recovery of multiple mutant alleles at any locus of interest.

Identification of two evolutionarily conserved and functional regulatory elements in intron 2 of the human BRCA1 gene

Cross-species comparative genomics is a powerful strategy for identifying functional regulatory elements within noncoding DNA. In this paper, comparative analysis of human and mouse intronic sequences in the breast cancer susceptibility gene (BRCA1) revealed two evolutionarily conserved noncoding sequences (CNS) in intron 2, 5 kb downstream of the core BRCA1 promoter. The functionality of these elements was examined using homologous-recombination-based mutagenesis of reporter gene-tagged cosmids incorporating these regions and flanking sequences from the BRCA1 locus. This showed that CNS-1 and CNS-2 have differential transcriptional regulatory activity in epithelial cell lines. Mutation of CNS-1 significantly reduced reporter gene expression to 30% of control levels. Conversely mutation of CNS-2 increased expression to 200% of control levels. Regulation is at the level of transcription and shows promoter specificity. Both elements also specifically bind nuclear proteins in vitro. These studies demonstrate that the combination of comparative genomics and functional analysis is a successful strategy to identify novel regulatory elements and provide the first direct evidence that conserved noncoding sequences in BRCA1 regulate gene expression. (c) 2005 Elsevier Inc. All rights reserved.

The relationship of adult attachment to emotion, catastrophizing, control, threshold and tolerance, in experimentally-induced pain

Although insecure attachment has been associated with a range of variables linked with problematic adjustment to chronic pain, the causal direction of these relationships remains unclear. Adult attachment style is, theoretically, developmentally antecedent to cognitions, emotions and behaviours (and might therefore be expected to contribute to maladjustment). It can also be argued, however, that the experience of chronic pain increases attachment insecurity. This project examined this issue by determining associations between adult attachment characteristics, collected prior to an acute (coldpressor) pain experience, and a range of emotional, cognitive, pain tolerance, intensity and threshold variables collected during and after the coldpressor task. A convenience sample of 58 participants with no history of chronic pain was recruited. Results demonstrated that attachment anxiety was associated with lower pain thresholds; more stress, depression, and catastrophizing; diminished perceptions of control over pain; and diminished ability to decrease pain. Conversely, secure attachment was linked with lower levels of depression and catastrophizing, and more control over pain. Of particular interest were findings that attachment style moderated the effects of pain intensity on the tendency to catastrophize, such that insecurely attached individuals were more likely to catastrophize when reporting high pain intensity. This is the first study to link attachment with perceptions of pain in a pain-free sample. These findings cast anxious attachment as a vulnerability factor for chronic pain following acute episodes of pain, while secure attachment may provide more resilience. (c) 2006 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Evaluation of Melanotaenia duboulayi (Atheriniformes : Melanotaeniidae), Hypseleotris galii (Perciformes : Eleotridae), and larvicide Vectolex (R) WG (Bacillus sphaericus) for integrated control of Culex annulirostris

Australian freshwater fish species Melanotaenia duboulayi and Hypseleotris galii were selected for a small plot field evaluation of an integrated pest management strategy using native fish and VectoLex® WG (Bacillus sphaericus) for the control of Culex annulirostris Skuse, the principal freshwater vector of arbovirus Ross River virus in Australia. When tested alone, the level of control afforded by M. duboulayi and H. galii was highly dependent on the prerelease density of mosquito larvae; and even when stocking rates as high as 10 g per pond (>30 kg/ha) were used, larval abundance was too high to attain adequate control from fish alone. In contrast, treatment with VectoLex WG at 500 g/ha resulted in 100% mortality of Cx. annulirostris immatures, but no residual activity was evident. The delayed reduction of Cx. annulirostris immatures in ponds stocked with fish alone, and the recolonization by Cx. annulirostris in ponds after treatment with B. sphaericus, did not occur when both treatments were combined.

'Looking good, feeling better': Consumption, Control and the Aesthetics of Exclusivity in the Service Encounter

The majority of ‘service’ literature has focused on the production side of service work (i.e. employees and management), while treating the role of the customer and/or consumer as secondary (Korczynski and Ott, 2004). Those authors who have addressed the role consumption plays in shaping and maintaining individuals' self- identity have tended to overemphasize the dominance of consumer culture in shaping ‘our consciousness’ (Ritzer, 1999), with little in the way of empirical evidence to support these assertions. This paper develops the conceptualization of service work and consumer culture literature, by placing more emphasis on the customer in the service encounter. Using an ethnographic study of a ‘high class’ department store, this paper addresses employee and customer identity and the nature of managerial, employee and customer control within this ‘exclusive’ context. Of particular interest is how employees and customer’s ‘embody’ this control. Using Bourdieu’s (1986) conception of class and habitus, the concept of exclusivity goes beyond the management /service worker dyad by providing a means of investigating identity control by the organization over both customers and service workers. However, an organization’s exclusivity is not a closed normative pursuit of control, and shows this enterprise is part of a contested terrain, while revealing the ambiguity and ‘openness’ of control practices and pursuits. In order to uphold the ideal of exclusivity, management, service workers and customers must all engage in a precarious quest for establishing and maintaining a sense of control and/or identity. This paper demonstrates the continuing contradiction between bureaucratic practices of control and consumer culture, and highlights the need for research that investigates the context -dependent nature of control in service-related and consumer studies.

Examining a key aspect of agency-to-business relationships:the effects of regulatory control on the satisfaction of regulated firms

This paper studies an overlooked, but highly important relationship, the relationship that exists between regulatory agencies (e.g., the EPA, OSHA, and the FDA) and the for-profit businesses they attempt to govern. Drawing on business-to-business control and satisfaction research, a framework is developed to understand how regulatory control influences the satisfaction levels of customer firms. Regulatory control is disaggregated into four distinct facets: the controlling agency, the rules and regulations of control, the processes used by the agency to apply the regulations, and sanctions. Each facet is hypothesized to have an effect on satisfaction. A regulator's administration of state food safety regulations provides the empirical context for testing the hypotheses. Results from a survey of 173 restaurants provide empirical support for the conceptual model. Most importantly, the study finds that the informal control process increases customer satisfaction, while the formal control process decreases customer satisfaction. We discuss how these and other findings may contribute to more effective agency-to-business relationships and ongoing research.

When do firms conform? The effect of regulatory control processes on compliance and opportunism

The authors use social control theory to develop a conceptual model that addresses the effectiveness of regulatory agencies’ (e.g., Food and Drug Administration, Occupational Safety and Health Administration) field-level efforts to obtain conformance with product safety laws. Central to the model are the control processes agencies use when monitoring organizations and enforcing the safety rules. These approaches can be labeled formal control (e.g., rigid enforcement) and informal control (e.g., social instruction). The theoretical framework identifies an important antecedent of control and the relative effectiveness of control’s alternative forms in gaining compliance and reducing opportunism. Furthermore, the model predicts that the regulated firms’ level of agreement with the safety rules moderates the relationships between control and firm responses. A local health department’s administration of state food safety regulations provides the empirical context for testing the hypotheses. The results from a survey of 173 restaurants largely support the proposed model. The study findings inform a discussion of effective methods of administering product safety laws. The authors use social control theory to develop a conceptual model that addresses the effectiveness of regulatory agencies’ (e.g., Food and Drug Administration, Occupational Safety and Health Administration) field-level efforts to obtain conformance with product safety laws. Central to the model are the control processes agencies use when monitoring organizations and enforcing the safety rules. These approaches can be labeled formal control (e.g., rigid enforcement) and informal control (e.g., social instruction). The theoretical framework identifies an important antecedent of control and the relative effectiveness of control’s alternative forms in gaining compliance and reducing opportunism. Furthermore, the model predicts that the regulated firms’ level of agreement with the safety rules moderates the relationships between control and firm responses. A local health department’s administration of state food safety regulations provides the empirical context for testing the hypotheses. The results from a survey of 173 restaurants largely support the proposed model. The study findings inform a discussion of effective methods of administering product safety laws.

Computer control of machines utilising independent drive mechanisms

The thesis describes an investigation into methods for the specification, design and implementation of computer control systems for flexible manufacturing machines comprising multiple, independent, electromechanically-driven mechanisms. An analysis is made of the elements of conventional mechanically-coupled machines in order that the operational functions of these elements may be identified. This analysis is used to define the scope of requirements necessary to specify the format, function and operation of a flexible, independently driven mechanism machine. A discussion of how this type of machine can accommodate modern manufacturing needs of high-speed and flexibility is presented. A sequential method of capturing requirements for such machines is detailed based on a hierarchical partitioning of machine requirements from product to independent drive mechanism. A classification of mechanisms using notations, including Data flow diagrams and Petri-nets, is described which supports capture and allows validation of requirements. A generic design for a modular, IDM machine controller is derived based upon hierarchy of control identified in these machines. A two mechanism experimental machine is detailed which is used to demonstrate the application of the specification, design and implementation techniques. A computer controller prototype and a fully flexible implementation for the IDM machine, based on Petri-net models described using the concurrent programming language Occam, is detailed. The ability of this modular computer controller to support flexible, safe and fault-tolerant operation of the two intermittent motion, discrete-synchronisation independent drive mechanisms is presented. The application of the machine development methodology to industrial projects is established.

The formation and impact of hazard control policy:a study of the regulation of white lead paint in Britain

Government regulation of industrial hazards is examined in the context of the economic and technical processes of industrial development. Technical problems and costs of control are considered as factors in both the formation and impact of regulation. This thesis focuses on an historical case-study of the regulation of the hazard to painting workers from the use of lead pigments in paint. A regulatory strategy based on the prohibition of lead paints gained initial acceptance within the British state in 1911, but was subsequently rejected in favour of a strategy that allowed continued use of lead paint subject to hygiene precautions. The development of paint technology and its determinants, including concern about health hazards, are analysed, focusing on the innovation and diffusion into the paint industry of the major white pigments: white lead (PbC03 .PB(OH)2)and its substitutes. The process of regulatory development is examined, and the protracted and polarised regulatory d~bate contrasted to the prevailing 'consensual' methods of workplace regulation. The rejection of prohibition is analysed in terms of the different political and technical resources of those groups in conflict over this policy. This highlights the problems of consensus formation around such a strategy, and demonstrates certain constraints on state regulatory activity, particularly regarding industrial development. Member-states of the International Labour Organisation agreed to introduce partial prohibition of lead paint in 1921. Whether this was implemented is related to the economic importance of lead and non-lead metal and pigment industries to a nation. An analysis is made of the control of lead poisoning. The rate of control is related to the economic and technological trajectory of the regulated industry. Technical and organisational characteristics are considered as well as regulatory factors which range from voluntary compliance and informal pressures to direct legal requirements. The implications of this case-study for the analysis of the development and impacts of regulation are assessed.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

Cost and time control of construction project: inhibiting factors and mitigating measures in practice

Despite the availability of various control techniques and project control software many construction projects still do not achieve their cost and time objectives. Research in this area so far has mainly been devoted to identifying causes of cost and time overruns. There is limited research geared towards studying factors inhibiting the ability of practitioners to effectively control their projects. To fill this gap, a survey was conducted on 250 construction project organizations in the UK, which was followed by face-to-face interviews with experienced practitioners from 15 of these organizations. The common factors that inhibit both time and cost control during construction projects were first identified. Subsequently 90 mitigating measures have been developed for the top five leading inhibiting factors—design changes, risks/uncertainties, inaccurate evaluation of project time/duration, complexities and non-performance of subcontractors were recommended. These mitigating measures were classified as: preventive, predictive, corrective and organizational measures. They can be used as a checklist of good practice and help project managers to improve the effectiveness of control of their projects.

Cost and time control of construction projects: a survey of contractors and consultants in the UK

Numerous techniques have been developed to control cost and time of construction projects. However, there is limited research on issues surrounding the practical usage of these techniques. To address this, a survey was conducted on the top 150 construction companies and 100 construction consultancies in the UK aimed at identifying common project control practices and factors inhibiting effective project control in practice. It found that despite the vast application of control techniques a high proportion of respondents still experienced cost and time overruns on a significant proportion of their projects. Analysis of the survey results concluded that more effort should be geared at the management of the identified top project control inhibiting factors. This paper has outlined some measures for mitigating these inhibiting factors so that the outcome of project time and cost control can be improved in practice.

Control of spatiotemporal chaos in catalytic CO oxidation by laser-induced pacemakers

Control of spatiotemporal chaos is achieved in the catalytic oxidation of CO on Pt(110) by localized modification of the kinetic properties of the surface chemical reaction. In the experiment, a small temperature heterogeneity is created on the surface by a focused laser beam. This heterogeneity constitutes a pacemaker and starts to emit target waves. These waves slowly entrain the medium and suppress the spatiotemporal chaos that is present in the absence of control. We compare this experimental result with a numerical study of the Krischer-Eiswirth-Ertl model for CO oxidation on Pt(110). We confirm the experimental findings and identify regimes where complete and partial controls are possible.

Predictors of maternal control of feeding at 1 and 2 years of age

Objective: To establish the best predictors of maternal use of controlling feeding practices at 1 and 2 years of age. Design: A longitudinal study from birth to 2 years. Participants: Sixty-two mothers of 2-year-old children. Measures: Infant weight at birth, 6, 12 and 24 months, breastfeeding history, infant temperament and feeding difficulties at 6 and 12 months, maternal demographics at 12 and 24 months, maternal mental health at 6 and 12 months, maternal controlling feeding practices at 12 and 24 months. Results: Controlling feeding practices at 1 year were predicted by perceptions of infant temperament at 6 months, birth weight, length of breastfeeding, mental health at 6 months, and mealtime negativity at 6 months. Parental control over feeding when their child reached 2 years was predicted by the mother's tendency to use that particular strategy at 1 year in combination with the perceptions of infant temperament and feeding problems at 1 year, weight at 1 year, length of breastfeeding in infancy, and/or maternal mental health at 1 year. Conclusions: Breastfeeding appears to promote subsequent monitoring, and is associated with reduced use of pressurising and restrictive feeding practices. Infant characteristics are important predictors of control at both 1 and 2 years of age. The use of controlling feeding practices is relatively stable from 1 to 2 years. © 2007 Nature Publishing Group All rights reserved.