Endophytic microorganisms isolated from coffee leaves, roots and branches as plant growth promoters and biocontrol agents of coffee leaf rust

Suppression of plant diseases and growth promotion due to the action of endophytic microorganisms has been demonstrated in several pathosystems. Experiments under controlled conditions involving 234 endophytic bacteria and fungi isolated from coffee leaves, roots and branches were conducted with the objective of evaluating the germination inhibition of Hemileia vastatrix urediniospores, the control of coffee leaf rust development in tests with leaf discs and on plastic bags seedling, and to promote growth of coffee seedlings. None of the fungal isolates induced plant growth or reduced disease severity. The bacterial isolates (identified by the fatty acids profile analysis) 85G (Escherichia fergusonii), 161G, 163G, 160G, 150G (Acinetobacter calcoaceticus) and 109G (Salmonella enterica) increased plant growth, the maximum being induced by 85G. This isolate produced in vitro phosphatase and indol acetic acid. In assay to control rust on coffee leaf disc, nine bacterial isolates, 64R, 137G, 3F (Brevibacillus choshinensis), 14F (Salmonella enterica), 36F (Pectobacterium carotovorum), 109G (Bacillus megaterium), 115G (Microbacterium testaceum), 116G and 119G (Cedecea davisae) significantly reduced disease severity, when applied 72 or 24h before challenging with the pathogen. In seedling tests most disease severity reduction was achieved by the isolates 109G and 119G. There was no correspondence between the organisms that promoted seedling growth and those that reduced rust severity on seedlings or leaf discs.

Productivity, Leaf Nutrient Content and Soil Carbon Stocked in Agroforestry and Traditional Management of Maize (Zea mays L.)

The aim of the work was to evaluate the productivity, leaf nutrient content and soil nutrient concentration in maize (Zea mays L.) grown in sequence with black oats (Avena strigosa Schreb.) under Leucaena diversifolia alley cropping agroforestry system (AFS) and traditional management system/sole crop (without trees-TS), after two years of cultivation following a randomized block design. The experiment was carried out in the Brazilian Association of Biodynamic Agriculture, in Botucatu—S?o Paulo, Brazil. Treatments were: control (C), chemical fertilizer application (F), biomass of L. diversifolia alley cropping application (B), biomass of L. diversifolia alley cropping + chemical fertilizer application (B + F). In the second year of management it was observed that black oat yield was higher in treatments B + F and F with significant difference in relation to the others treatments in both systems, followed by treatment B. Between systems, only treatment B showed significant difference, with higher yield value corresponding to AFS, reflecting the efficiency of AFS to promote soil fertility. Maize production presented the second year of cultivation an increasing trend in all treatments in both production systems. This result may be due to the cumulative effect of mineralization and maize straw and oats, along the experiment. How productivity was higher in the AFS system, could also be occurring effect of biological nitrogen fixation, water retention and reduction of extreme microclimate through the rows of L. diversifolia. Comparing the AFS and TS, it was observed that the concentration of N in leaf tissue was higher in the AFS treatments, probably due to nitrogen fixation performed through the rows of L. diversifolia, that is a nitrogen fixing tree species. After two years, carbon stocked in soil show higher values in the treatments biomass + fertilizer and biomass application, in both systems, AFS and TS.

Tropidomyrmex elianae, a new myrmicine ant genus and species from Brazil, tentatively assigned to Solenopsidini (Hymenoptera, Formicidae)

A new myrmicine ant, Tropidomyrmex elianae gen. n. & sp. n., is described from southeastern and central Brazil, based on workers, ergatoid gynes, males and larvae. Tropidomyrmex workers are relatively small, monomorphic, characterized mainly by the feebly pigmented and extremely thin integument; subfalcate mandibles bearing a single apical tooth; palpal formula 1,2; clypeus relatively broad and convex; reduced compound eyes; propodeum unarmed and with a strongly medially depressed declivous face; double and bilobed well developed subpostpetiolar processes; and peculiarities in the sting apparatus. A colony fragment of T. elianae containing workers, ergatoid gynes, males, and brood was found inside a ground termite nest (Anoplotermes pacificus Apicotermitinae) in a montane rocky scrubland in the state of Minas Gerais, southeastern Brazil. Tropidomyrmex elianae is known also from two workers collected in leaf litter samples processed with a Winkler extractor, from the state of Tocantins, central-north Brazil. Despite the differences from the accepted solenopsidine genera, Tropidomyrmex is tentatively assigned to this tribe. Within the solenopsidine ants, the genus is apparently related to Tranopelta. Tropidomyrmex is marked by extreme reductions, perhaps reflecting adaptations to particular habits and habitats.

A taxonomic revision of the Neotropical myrmicine ant genus Lachnomyrmex wheeler (Hymenoptera : Formicidae)

The Neotropical ant genus Lachnomyrmex Wheeler, 1910 is revised for the first time. A revised generic description is provided for workers and gynes; males remain unknown. Morphological patterns combined with geographical data led to the recognition of 16 species, of which 10 are here described as new: L. amazonicus sp. n., L. fernandezi sp. n., L. grandis Fernandez & Baena, L. haskinsi Smith, L. lattkei sp. n., L. longinodus Fernandez & Baena, L. longinoi sp. n., L. mackayi sp. n., L. nordestinus sp. n., L. pilosus Weber, L. laticeps sp. n., L. platynodus sp. n., L. plaumanni Borgmeier, L. regularis sp. n., L. scrobiculatus Wheeler, and L. victori sp. n. The gynes of L. grandis, L. haskinsi, and L. pilosus are described for the first time. Illustrated identification keys for workers, distribution maps, and high resolution illustrations are supplied for all species. Some Lachnomyrmex species are relatively common in the leaf-litter of submontane wet forests in Central and South America; others remain known by very few individuals. The relatively small and apparently monogynic Lachnomyrmex colonies inhabit small nests in the ground, among rotten leaves and inside fallen logs. Workers generally forage alone on the ground or within the leaf litter, but have been recorded also on tree trunks, and apparently do not recruit nestmates.

Revisionary studies on the enigmatic neotropical ant genus Stegomyrmex Emery, 1912 (Hymenoptera : Formicidae : Myrmicinae), with the description of two new species

The recent increase in leaf litter ants sampling effort in Neotropical wet forests has revealed new and interesting records of the highly specialized myrmicine ant genus Stegomyrmex Emery, previously considered as extremely rare. We present a modified diagnosis for the genus and describe Stegomyrmex bensoni n. sp. and S. olindae n. sp., based on, respectively, workers, males, and gyne (central-north Brazil) and on a single worker (northern Brazil). Stegomyrmex vizottoi Diniz (southeastern Brazil) is redescribed and compared with S. olindae n. sp.; these species present significant differences in size, sculpturation, and sting apparatus morphology. The males of S. vizottoi are described for the first time. A key for workers and queens and a distribution map for the five know Stegomyrmex species are provided.

Assembly of Myrmelachista Roger (Formicidae: Formicinae) in twigs fallen on the leaf litter of Brazilian Atlantic Forest

The nests of Myrmelachista are found in tree trunk cavities and branches. The biology of these arboreal ants is still relatively unknown. We investigated the nesting behaviour of this genus in fallen dry twigs in the Atlantic rainforest of southeastern Brazil. Physical characteristics of the nests, colony demographics, presence of breeders and ant worker sizes were recorded. Samples were collected weekly for 12 months, along open, sunny and undisturbed trails within forest remnants. In all, 202 nests were collected and six species were recorded. Myrmelachista ruszkii had the highest population of immatures and the greatest number of nests found. Myrmelachista nodigera had the smallest workers, was the least populous and the colony was housed in the finest branches. These results expand the current knowledge about the diversity and biology of Myrmelachista in the Brazilian Atlantic forest, and describe polydomic nests and competitive behaviour of M. ruszkii.

PHYSIOLOGICAL CHANGES IN SEEDS AND ANTIOXIDANT METABOLISM OF LETTUCE SEEDLING EXPOSED TO THE ACTION OF Zantedeschia aethiopica Spreng. LEAF EXTRACT

This work aimed to evaluate the influence of different concentrations of Zantedeschia aethiopica Spreng. extract on the physiological performance of the seed and on the response of the antioxidant metabolism of lettuce seedlings. The treatments consisted of leaves extracts from Z. aethiopica at concentrations of 0, 6, 12, 25 and 50%. Germination, first germination count, germination speed and index, length of shoot and radicle, seedling total dry mass, chlorophyll content, activity of superoxide dismutase, catalase and ascorbarte peroxidase enzymes, lipid peroxidation, hydrogen peroxide quantification and seedling emergence, length of organs, and total dry mass of seedlings were evaluated. The percentage of germination, the length of the shoot and radicle of seedlings and the total dry mass of seedlings grown in the greenhouse were reduced as the concentration of the extract increased. There were increases of electrical conductivity, of superoxide dismutase, catalase and ascorbate peroxidadase enzymes and the amount of hydrogen peroxide and lipid peroxidation in seedlings with increasing extract concentration. The extract reduced the physiological quality of lettuce seeds and induced an increased production of hydrogen peroxide in seedlings, which increased the activity of antioxidant enzymes that were not effective in tissue detoxification, resulting in cellular damage and increased numbers of abnormal seedlings.

Characterization of the procera Tomato Mutant Shows Novel Functions of the SlDELLA Protein in the Control of Flower Morphology, Cell Division and Expansion, and the Auxin-Signaling Pathway during Fruit-Set and Development

procera (pro) is a tall tomato (Solanum lycopersicum) mutant carrying a point mutation in the GRAS region of the gene encoding SlDELLA, a repressor in the gibberellin (GA) signaling pathway. Consistent with the SlDELLA loss of function, pro plants display a GA-constitutive response phenotype, mimicking wild-type plants treated with GA(3). The ovaries from both nonemasculated and emasculated pro flowers had very strong parthenocarpic capacity, associated with enhanced growth of preanthesis ovaries due to more and larger cells. pro parthenocarpy is facultative because seeded fruits were obtained by manual pollination. Most pro pistils had exserted stigmas, thus preventing self-pollination, similar to wild-type pistils treated with GA(3) or auxins. However, Style2.1, a gene responsible for long styles in noncultivated tomato, may not control the enhanced style elongation of pro pistils, because its expression was not higher in pro styles and did not increase upon GA(3) application. Interestingly, a high percentage of pro flowers had meristic alterations, with one additional petal, sepal, stamen, and carpel at each of the four whorls, respectively, thus unveiling a role of SlDELLA in flower organ development. Microarray analysis showed significant changes in the transcriptome of preanthesis pro ovaries compared with the wild type, indicating that the molecular mechanism underlying the parthenocarpic capacity of pro is complex and that it is mainly associated with changes in the expression of genes involved in GA and auxin pathways. Interestingly, it was found that GA activity modulates the expression of cell division and expansion genes and an auxin signaling gene (tomato AUXIN RESPONSE FACTOR7) during fruit-set.

Social facilitation and food partitioning in the queenless ant Dinoponera quadriceps (Hymenoptera: Formicidae)

Social facilitation occurs when an animal is more likely to behave in a certain way in response to other animals engaged in the same behaviour. For example, an individual returning to the nest with food stimulates other ants to leave and to forage. In the present study we demonstrate the existence of new facets in the colony organization of Dinoponera quadriceps: a positive feedback between the incoming food and the activation of new foragers, and the occurrence of incipient task partitioning during the food sharing. Lower-ranked workers located inside the nest process protein resources and higher-ranked workers handle smaller pieces and distribute them to the larvae. In conclusion, D. quadriceps has a decentralized pattern of task allocation with a double regulatory mechanism, which can be considered a sophisticated aspect of division of labour in ponerine ants.

Assessment of the high-dose concept and level of control provided by MON 87701 x MON 89788 soybean against Anticarsia gemmatalis and Pseudoplusia includens (Lepidoptera: Noctuidae) in Brazil

BACKGROUND: Genetically modified MON 87701 X MON 89788 soybean (Glycine max), which expresses the Cry1Ac and EPSP-synthase proteins, has been registered for commercial use in Brazil. To develop an Insect Resistance Management (IRM) program for this event, laboratory and field studies were conducted to assess the high-dose concept and level of control it provides against Anticarsia gemmatalis and Pseudoplusia includens. RESULTS: The purified Cry1Ac protein was more active against A. gemmatalis [LC50 (FL 95%) = 0.23 (0.150.34) mu g Cry1Ac mL-1 diet] than P. includens [LC50 (FL 95%) = 3.72 (2.654.86) mu g Cry1Ac mL-1 diet]. In bioassays with freeze-dried MON 87701X MON 89788 soybean tissue diluted 25 times in an artificial diet, there was 100% mortality of A. gemmatalis and up to 95.79% mortality for P. includens. In leaf-disc bioassays and under conditions of high artificial infestation in the greenhouse and natural infestation in the field, MON 87701X MON 89788 soybean showed a high level of efficacy against both target pests. CONCLUSIONS: The MON 87701X MON 89788 soybean provides a high level of control against A. gemmatalis and P. includes, but a high-dose event only to A. gemmatalis. Copyright (c) 2012 Society of Chemical Industry

Biochemical Analysis of a Castor Bean Leaf Extract and its Insecticidal Effects Against Spodoptera frugiperda (Smith) (Lepidoptera: Noctuidae)

Plant extracts represent a great source of molecules, with insecticidal activity, which are used for pest control in several crop production systems. This work aimed to evaluate the toxicity of an aqueous extract of leaves of castor bean against larvae of Spodoptera frugiperda (Smith) (Lepidoptera: Noctuidae) in search for different classes of molecules with insecticidal activities by using in vitro assays. The effects of the castor bean leaf extract on the food utilization, development, and survival of S. frugiperda larvae was evaluated by feeding the larvae an artificial diet supplemented with different concentrations of the extract (0%, 1%, 2.5%, 5%, and 10% w/v). The effects observed were dose-dependent, and the highest concentration evaluated (10% w/v) was the one the most affected food utilization by altering the nutritional indices, as well as larval weight gain, development time, and survivorship. In vitro assays to detect saponins, lectins, and trypsin inhibitors in the castor bean leaf extract were performed, but only trypsin inhibitors were detected. No preference for the diet source was detected in S. frugiperda by feeding the larvae in choice experiments with diets containing different concentrations of the castor bean extract tested. The data obtained indicate the existence of a potential molecule in the tested extract of castor bean to be used as an alternative insecticide to be integrated in the management of S. frugiperda.

Effects of Black Leaf Streak Disease and Sigatoka Disease on fruit quality and maturation process of bananas produced in the subtropical conditions of southern Brazil

Banana fruits are harvested at the green-mature stage (pre-climacteric) in order to allow sufficient time for transport and marketing. The time between the harvest and the initiation of the natural ripening process is called green life (GL), which is closely correlated to physiological age. Sigatoka Disease (SD: also called yellow Sigatoka) and Black Leaf Streak Disease (BLSD; also called black Sigatoka) are the main foliar diseases affecting banana production. The aim of this work was to investigate the influence of these diseases on banana GL and postharvest behavior in subtropical conditions (southeastern Brazil). The results showed that both diseases shortened the banana's GL when compared to control bananas of the same physiological age. Moreover, fruits from infested plots showed higher values of CO2 (+100% for SD and +300% for BLSD) and C2H4 production (+30% for SD and +60% for BLSD) at the climacteric peak. BLSD caused 40% reduction in fruit weight. Fruits from plants with a high degree of SD or BLSD undergo an altered maturation process. (C) 2011 Elsevier Ltd. All rights reserved.

NADPH Phagocyte Oxidase Knockout Mice Control Trypanosoma cruzi Proliferation, but Develop Circulatory Collapse and Succumb to Infection

(NO)-N-center dot is considered to be a key macrophage-derived cytotoxic effector during Trypanosoma cruzi infection. On the other hand, the microbicidal properties of reactive oxygen species (ROS) are well recognized, but little importance has been attributed to them during in vivo infection with T. cruzi. In order to investigate the role of ROS in T. cruzi infection, mice deficient in NADPH phagocyte oxidase (gp91(phox-/-) or phox KO) were infected with Y strain of T. cruzi and the course of infection was followed. phox KO mice had similar parasitemia, similar tissue parasitism and similar levels of IFN-gamma and TNF in serum and spleen cell culture supernatants, when compared to wild-type controls. However, all phox KO mice succumbed to infection between day 15 and 21 after inoculation with the parasite, while 60% of wild-type mice were alive 50 days after infection. Further investigation demonstrated increased serum levels of nitrite and nitrate (NOx) at day 15 of infection in phox KO animals, associated with a drop in blood pressure. Treatment with a NOS2 inhibitor corrected the blood pressure, implicating NOS2 in this phenomenon. We postulate that superoxide reacts with (NO)-N-center dot in vivo, preventing blood pressure drops in wild type mice. Hence, whilst superoxide from phagocytes did not play a critical role in parasite control in the phox KO animals, its production would have an important protective effect against blood pressure decline during infection with T. cruzi.

Bromatological evaluation of eleven corn cultivars harvested at two cutting heights

The objective of this study was to evaluate the chemical composition and dry matter in vitro digestibility of stem, leaf, straw, cob and kernel fractions of eleven corn (Zea mays) cultivars, harvested at two cutting heights. The experiment was designed as randomized blocks, with three replicates, in a 2 × 11 factorial arrangement (eleven cultivars and two cutting heights). The corn cultivars evaluated were D 766, D 657, D 1000, P 3021, P 3041, C 805, C 333, AG 5011, FOR 01, CO 9621 and BR 205, harvested at a low cutting height (5 cm above ground) and a high cutting height (5 cm below the first ear insertion). Cutting height influenced the dry matter content of the stem fraction, which was lower (23.95%) in plants harvested at the low, than in plants harvested at the high cutting height (26.28%). The kernel fraction had the highest dry matter in vitro digestibility (85.13%), while cultivars did not differ between each other. Cob and straw were the fractions with the highest level of neutral detergent fiber (80.74 and 79.77%, respectively) and the lowest level of crude protein (3.84% and 3.69%, respectively). The leaf fraction had the highest crude protein content, both for plants of low and high cuttings (15.55% and 16.20%, respectively). The increase in the plant cutting height enhanced the dry matter content and dry matter in vitro digestibility of stem fraction, but did not affect the DM content of the leaf fraction.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.