955 resultados para Layer-by-layer technique
Resumo:
Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.
Resumo:
Traditional methods for dentures fabrication require a wide clinical and laboratory procedures; however, there is no scientific evidence that these methods can produce better results when compared with simplified methods. Aim: To evaluate the effectiveness of a simplified methods for denture fabrication, comparing it to the traditional one through masticatory efficiency and prosthesis quality. Method: A randomized controlled trial was conducted with 50 patients, 25 rehabilitated with prosthesis produced by traditional technique and 25 rehabilitated by a simplified technique. The masticatory efficiency was evaluated by colorimetric method, using chewing capsules. The quality of prosthesis was obtained using a reliable and reproducible instrument. Statistical analysis of the masticatory efficiency and quality of the prosthesis was obtained by the Mann-Whitney test. Results: 39 patients completed the study, 18 on traditional group and 21 on simplified group. There was no difference between groups for the masticatory efficiency (p = 0.835) and the quality of the prosthesis (p = 0672). The evaluation of the overall quality of the prosthesis according to oral conditions, demonstrated significant difference on the height of the mandibular ridges (p = 0.010) and mandibular muscle attachments (p = 0.039). Conclusion: Complete dentures fabricated by simplified method were considered effective from the point of view of masticatory efficiency and quality of prosthetics, with results similar to those made by the traditional method.
Resumo:
The various types of pig farming, intensive and extensive, expose them to pig parasites but also to those from the environment of the breeding site. In this work was evaluated the exposure of bigs bred in technified farms, SISCAL (intensive breeding system in pens) and not technified (backyard) to leptospira, ticks and rickettsiae. Blood sera were analyzed to determine titers of antibodies anti-Leptospira by SAM technique and antibodies anti-rickettsial by IFA, pigs were inspected for ticks and in their breeding environment and surrounding areas (pastures and riparian vegetation), ticks were collected by the flannel dragging technique. In the farms of pigs 10.4% had anti-Leptospira antibodies, followed by SISCAL (8%) and backyard animals (2.5%). The serovars found were Bratislava, Pomona, serovar, Canicola and Icterohaemorrhagiae. Higher percentage of properties with pigs raised outdoors (SISCAL) had tick infested animals (20%) than those raised in backyard (6.7%), while commercial farms had no infested pigs nor infested breeding place. In both SISCAL and backyard pig breeding properties ticks were observed at the breeding site environment. Tick infestations were detected in areas surrounding pig breeding site in all three husbandry suystems. Ticks found were all Amblyomma scultpum nymphs or adults with the exception of one of Amblyomma parvum adult. In relation to anti-rickettsia serology to five Rickettsia species, 55.2% of pigs from commercial farms reacted to al least one species, backyard pigs reacted to 89.7% and all pigs of SISCAL showed anti-rickettsia titers. Consecutive tick sampling (June 2014 to February 2016) in SISCAL FAZU in Uberaba, showed the establishment A. sculptum ticks maintained by domestic pigs. These observations demonstrate the ability the pigs to maintain populations of A. sculptum at a favorable environment and may indicate a new trend in environmental infestations by this species of tick. Exposure to Leptospira and Rickettsia demonstrated the potential pigs exposure and transmission of important diseases in public health.
Resumo:
Salmonella Enteritidis, S. Typhimurium and S. Infantis are often associated with cases of human infections worldwide and is transmitted through consumption of contaminated food, particularly those of animal origin, especially chicken meat. This thesis was fractionated into three chapters, the first one relating to general considerations about the topics discussed in the following chapters. The second chapter aimed to evaluate virulence characteristics, antimicrobial resistance and the genetic similarity of 51 strains of S. Infantis isolated in samples of poultry origin from an industry located in the state of São Paulo, Brazil, during the 2009 to 2010 period. The third chapter aimed to analyze 111 strains of S. Enteritidis, 45 of Salmonella Typhimurium and 31 of Salmonella Typhimurium monophasic variant I 4, [5], 12:i:- isolated from chicken carcasses in different brazilian slaughterhouses from 2009 to 2011, and to estimate the risk to human health, based on the presence of virulence genes and antimicrobial resistance, correlating to the pathogenicity profiles (antimicrobial resistance and presence of virulence and resistance genes) with the genetic profile (ribogroup) of the isolates. To evaluate the antimicrobial susceptibility was performed the disk diffusion test for all serotypes of Salmonella, and exclusively to S. Enteritidis and S. Typhimurium, was also verified the minimum inhibitory concentration for ciprofloxacin and ceftazidime antibiotics. The presence of virulence genes invA (invasion), lpfA (fimbriae-adhesion), agfA (fimbriae-biofilm) and sefA (fimbriae-adhesion) were evaluated by PCR. The strains that showed resistance to antibiotics of β-lactams class were evaluated for the presence of resistance genes blaTEM, blaSHV, blaCTX-M and blaAmpC. For resistant strains to quinolones and fluoroquinolones antibiotics classes were searched the qnrA and qnrS genes. The phylogenetic relationship among the isolates was determined by RAPD method for S. Infantis strains, and by ribotyping technique to S. Enteritidis and S. Typhimurium.
Resumo:
For this study, a research was conducted in order to answer the question "What chemistry teaching has been developed in the Youth and Adult Education (EJA) ?". The research provides an overview of the object to the proposed changes, leading students to live with different realities and investigating the issue of contextualization based on the daily lives of these students related to the subject of chemistry. The methodology focuses ethnographic research of the case study, in which a case is studied in depth using the participant observation. In the survey data a mixed qualitative and quantitative approach was used. The work involved 6 schools that offer adult education high school; 6 directors of these schools; 6 coordinators who work in adult education; 6 Chemistry teachers and 123 students of the EJA, level high school, enrolled in the 1st, 2nd, 3rd and 4th periods. The first stage of the research consisted of questionnaires in schools where everyone involved responded closed and open questions applied to each specific group. In the second stage two schools were selected in order to conduct a deeper knowledge of adult education through practical activities of Chemistry and subsequent interview conducted in groups with students. Three teachers were also interviewed to enable a deepening of issues relating to EJA and Chemistry Teaching. The interviews were analyzed by the technique of Discursive Textual Analysis (ATD). The main issues addressed in the questionnaires and interviews were on the school structure, reasons that lead students to drop out or remained in adult education and those who make the stay, the view of those involved of the importance of chemistry discipline for students of EJA and how this should be offered. It is necessary that we need to promote changes in the chemistry class and its activities, respecting the experiences and experience already gained by the student during his life story. Another factor to be highlighted is the need for ongoing training of teachers working in adult education. Note that your continued education is given more by the experience and the ways in which they try to overcome adverse situations. The Chemistry subject taught is not agree with the principles of EJA and practiced curriculum is just an adaptation or content reduction from the regular curriculum. The improvement in chemistry teaching of EJA will take place through a dialogue between those involved in the process, clearer educational policies and willingness to implement change. Thus the teaching of chemistry contribute to the students of the EJA are actually scientifically literate and integrated into society.
Resumo:
Ceramic materials have been widely used for various purposes in many different industries due to certain characteristics, such as high melting point and high resistance to corrosion. Concerning the areas of applications, automobile, aeronautics, naval and even nuclear, the characteristics of these materials should be strictly controlled. In the nuclear area, ceramics are of great importance once they are the nuclear fuel pellets and must have, among other features, a well controlled porosity due to mechanical strength and thermal conductivity required by the application. Generally, the techniques used to characterize nuclear fuel are destructive and require costly equipment and facilities. This paper aims to present a nondestructive technique for ceramic characterization using ultrasound. This technique differs from other ultrasonic techniques because it uses ultrasonic pulse in frequency domain instead of time domain, associating the characteristics of the analyzed material with its frequency spectrum. In the present work, 40 Alumina (Al2O3) ceramic pellets with porosities ranging from 5% to 37%, in absolute terms measured by Archimedes technique, were tested. It can be observed that the frequency spectrum of each pellet varies according to its respective porosity and microstructure, allowing a fast and non-destructive association of the same characteristics with the same spectra pellets.
Resumo:
This study explores the potential of the simvastatin to ameliorate inflammation and infection in open infected skin wounds of rats. Methods: Fourteen Wistar rats weighing 285±12g were used. The study was done in a group whose open infected skin wounds were treated with topical application of sinvastatina microemulsion (SIM, n=7) and a second group with wounds treated with saline 0.9 % (SAL, n=7). A bacteriological exam of the wounds fluid for gram positive and gram negative bacteria, the tecidual expression of TNFá and IL-1â by imunohistochemical technique, and histological analysis by HE stain were performed. Results: The expression of TNFa could be clearly demonstrated in lower degree in skin wounds treated with simvastatin (668.6 ± 74.7 ìm2) than in saline (2120.0 ± 327.1 ìm2). In comparison, wound tissue from SIM group displayed leukocyte infiltration significantly lower than that observed in SAL group (p<0.05). Culture results of the samples taken from wound fluid on fourth post treatment day revealed wound infection in only one rat of group simvastatin (SIM), where Proteus mirabilis, Escherchia coli and Enterobacter sp were isolated. In the rats whose wounds were treated with saline (SAL), polymicrobial infection with more than 100,000 CFU/g was detected in all the wounds. Conclusion: In addition to its antiinflammatory properties, the protective effects of simvastatin in infected open skin wounds is able to reduce infection and probably has antibacterial action. The potential to treat these wounds with statins to ameliorate inflammation and infection is promising
Resumo:
This dissertation examines the organizational innovation as a nonlinear process, which occurs in a social and political context and, therefore, socially immersed. Examines the case of shrimp in the state of RN, starting from the following problem: although the norteriograndense shrimp occupies the largest producer of farmed shrimp from Brazil, has a series of bottlenecks concerning the generation of industry innovation, concerning the social relationships and policies between the various actors in the network, whether private or public, and its consequences in terms of opportunity and limits generated for the innovative dynamics. The objective of the research is to understand how the social embeddedness of political actors affects norteriograndense shrimp within the context of structural relations, the industry generation of innovation, throughout its technological trajectory . The approach of social embeddedness balances atomised perspectives, undersocialized and oversocialized, of economic action, considering both the human capacity to act as sources of constraint, whose mechanisms are analyzed the structural and political. In methodological terms this is a case study, analyzed from the research literature, documentary and experimental. Primary data were collected through semi-structured interviews and analyzed in depth by the technique of content analysis. Was adopted a longitudinal approach, seeking to understand the phenomenon from the perspective of the subjects, describing it in an inductive process of investigation. After characterizing the sector and defining their technological trajectory, the analysis of the results followed its four stages: (1) Introduction of Technology: 1973-1980, (2) Intensification of Research: 1981-1991, (3) Technological Adaptation, 1992 -2003, (4) Technological Crisis: 2004-2009. A cross-sectional analysis along the evolutionary trajectory revealed the character of structural changes and policies over time, and implications on the generating process of innovation. Note that, the technological limit to which the sector reached requires changes in technology standards, but is more likely that the potiguar shrimp is entering a new phase of his career in technology rather than a new technological paradigm
Resumo:
A nivel mundial, existe una tendencia hacia el mayor consumo de frutas y hortalizas, motivada por una creciente preocupación de adoptar una dieta más equilibrada. Sin embargo su imagen de alimentos sanos las excluyen de toda sospecha cuando existen problemas de salud debido a la ingestión de alimentos. El objetivo de la presente tesis fue determinar la presencia de coliformes totales y E. coli en lechugas variedad Iceberg que se expenden en cuatro mercados de la ciudad de Cuenca. Los resultados obtenidos sirvieron como aporte al Departamento de Higiene y Control de Mercados del Ilustre Municipio de Cuenca. Este estudio fue de tipo descriptivo longitudinal. Se analizó un total de 96 muestras por duplicado y se realizó la determinación de coliformes totales y Escherichiacoli, mediante la técnica de placas PetrifilmTM. El grado de contaminación de las lechugas fue tolerable ya que solo el 1% de las muestras estuvo contaminada con niveles no aceptables de coliformes totales y el 6,25% con niveles no aceptables de E. coli, según la Recopilación Internacional de Normas Microbiológicas de los Alimentos y Asimilados de Pablo Moragas y col. Además, no se encontró ninguna relación significativa entre el mercado y el lugar de producción con el grado de contaminación de las lechugas. A pesar de la baja prevalencia de contaminación encontrada, la presencia de indicadores de contaminación fecal sugiere que las lechugas podrían tener una inadecuada calidad microbiológica, representando una fuente de ETAs, si la contaminación no es controlada mediante buenas prácticas de higiene
Resumo:
Sodium is an essential nutrient with important functions in the organism, however, its ingestion in excess may cause various health problems such as arterial hypertension, brain diseases, heart failure and chronic renal failure. In this context, the present study proposes to prepare Minas Padrão cheese with different contents of sodium with the objective of evaluating the effect of the addition of potassium chloride in sensory characteristics and hysicochemical properties, as well as in the proximal composition and in microbiological quality. The cheeses were elaborate in concentrations of 100% of NaCl (C), 80% of NaCl + 20% of KCl (T1), 60% of NaCl + 40% of KCl (T2), 40% of NaCl + 60% of KCl (T3) and 20% of NaCl + 80% of KCl (T4) and stored for 20 days at 10 ºC. The proximal composition and physicochemical was based on the determination of moisture content, fat, protein, ash, chloride, sodium, potassium, titratable acidity and pH of all treatments after 20 days of storage. The microbiological quality of the samples was monitored through the count of Total Coliforms and Escherichia coli, Staphylococcus aureus, Salmonella spp., mold and yeast in the first and fifteenth day of storage. The sensorial characterization was performed by the technique of Free Profile choice. The results showed that the replacement of sodium chloride by potassium in the Minas Padrão cheese in concentration higher than 40% presented significantly higher moisture contents. Cheese with a reduction greater than 60% of sodium obtained significantly effect in the titratable acidity, presenting higher values compared to the other treatments. The cheese with 20% of salt replacement did not differ statistically in relation to the control. When the proportion of substituent was increased, a significant reduction of the sodium content of up to 73% was observed. As the sodium was replaced by potassium in cheese, the potassium content increased significantly, stablishing a reduction of 82% in relation to the control. There was no effect to sodium substitution by potassium in fat, protein, ash and chlorides, as well as the pH values. The microbiological results were in accordance with the current legislation, therefore suitable to be eaten. According to the Free Profile Choice technique it was observed that the control C cheese (100% of NaCl) showed results very close to the other treatments, differing only in flavor attributes. The replacement of sodium by potassium in proportions of 20% contributed to a bitter taste detected by the tasters. Whereas, the appearance, flavor and texture attributes showed no significant differences compared to the Minas Padrão cheese.
Resumo:
To understand the evolution of bipedalism among the homnoids in an ecological context we need to be able to estimate theenerrgetic cost of locomotion in fossil forms. Ideally such an estimate would be based entirely on morphology since, except for the rare instances where footprints are preserved, this is hte only primary source of evidence available. In this paper we use evolutionary robotics techniques (genetic algoritms, pattern generators and mechanical modeling) to produce a biomimentic simulation of bipedalism based on human body dimensions. The mechnaical simulation is a seven-segment, two-dimensional model with motive force provided by tension generators representing the major muscle groups acting around the lower-limb joints. Metabolic energy costs are calculated from the muscel model, and bipedal gait is generated using a finite-state pattern generator whose parameters are produced using a genetic algorithm with locomotor economy (maximum distance for a fixed energy cost) as the fitness criterion. The model is validated by comparing the values it generates with those for modern humans. The result (maximum efficiency of 200 J m-1) is within 15% of the experimentally derived value, which is very encouraging and suggests that this is a useful analytic technique for investigating the locomotor behaviour of fossil forms. Initial work suggests that in the future this technique could be used to estimate other locomotor parameters such as top speed. In addition, the animations produced by this technique are qualitatively very convincing, which suggests that this may also be a useful technique for visualizing bipedal locomotion.
Resumo:
This study explores the potential of the simvastatin to ameliorate inflammation and infection in open infected skin wounds of rats. Methods: Fourteen Wistar rats weighing 285±12g were used. The study was done in a group whose open infected skin wounds were treated with topical application of sinvastatina microemulsion (SIM, n=7) and a second group with wounds treated with saline 0.9 % (SAL, n=7). A bacteriological exam of the wounds fluid for gram positive and gram negative bacteria, the tecidual expression of TNFá and IL-1â by imunohistochemical technique, and histological analysis by HE stain were performed. Results: The expression of TNFa could be clearly demonstrated in lower degree in skin wounds treated with simvastatin (668.6 ± 74.7 ìm2) than in saline (2120.0 ± 327.1 ìm2). In comparison, wound tissue from SIM group displayed leukocyte infiltration significantly lower than that observed in SAL group (p<0.05). Culture results of the samples taken from wound fluid on fourth post treatment day revealed wound infection in only one rat of group simvastatin (SIM), where Proteus mirabilis, Escherchia coli and Enterobacter sp were isolated. In the rats whose wounds were treated with saline (SAL), polymicrobial infection with more than 100,000 CFU/g was detected in all the wounds. Conclusion: In addition to its antiinflammatory properties, the protective effects of simvastatin in infected open skin wounds is able to reduce infection and probably has antibacterial action. The potential to treat these wounds with statins to ameliorate inflammation and infection is promising
Resumo:
O desenvolvimento de filmes e coberturas é um processo de transformação que utiliza polímeros capazes de formar uma matriz contínua. As proteínas de pescado apresentam propriedades que são vantajosas no preparo de biofilmes, como habilidade para formar redes, plasticidade e elasticidade, apresentando boa barreira ao oxigênio, mas sua barreira ao vapor de água é baixa devido à sua natureza hidrofílica. Estas propriedades podem ser melhoradas aplicando nanotecnologia, incluindo materiais como as nanoargilas. O objetivo do presente trabalho foi desenvolver filmes nanocompósitos a partir de biopolímeros protéicos provenientes de isolados protéicos de corvina (Micropogonias furnieri) e argilas organofílicas. O isolado protéico de corvina (IPC) foi obtido utilizando processo de variação de pH para solubilizar e isolar proteína. Os filmes poliméricos foram desenvolvidos pela técnica de “casting”. Para o desenvolvimento de filmes nanocompósitos de isolado protéico de corvina (IPC) e montmorilonita foi executado um planejamento experimental de 3 níveis e 3 fatores com 3 réplicas no ponto central. Os resultados foram submetidos à metodologia de superfície de resposta (MSR) para estudar os efeitos simultâneos das variáveis independentes, concentração de IPC (IPC = 2; 3,5 e 5 g/100 g de solução filmogênica); concentração de montmorilonita (MMT = 0,3; 0,5 e 0,7 g/100 g de solução filmogênica); e plastificante glicerol (G = 25, 30 e 35 g/100 g de IPC em base seca) sobre as respostas resistência à tração (MPa), elongação (%), força na ruptura (N), permeabilidade ao vapor de água (g mm m-2 d -1 KPa-1 ) e solubilidade (%). O isolado protéico obtido de carne mecanicamente separada de corvina apresentou 97,87% de proteína (em base seca), boa capacidade de retenção de água e solubilidade. Os valores de resistência à tração variaram entre 7,2 e 10,7 MPa e os valores de elongação de 39,6 a 45,8%. Os valores encontrados para PVA no presente trabalho encontram-se entre 3,2 e 5,5 g mm m-2 d -1 KPa-1 . Os filmes nanocompósitos produzidos a partir de IPC e MMT foram promissores, do ponto de vista das propriedades mecânicas, aparência visual e fácil manuseio, bem como baixa permeabilidade ao vapor de água e a baixa solubilidade. Com relação às propriedades mecânicas, a concentração de IPC e MMT foi o principal fator que influenciou no desenvolvimento dos filmes nanocompósitos. O planejamento experimental utilizado determinou que 3,5 g de IPC; 0,5 g de MMT e 30 (g/100g de IPC) de glicerol seriam os parâmetros ideais para desenvolvimento de filmes nanocompósitos utilizando a técnica de “casting”. As coberturas de isolado protéico de corvina (IPC) e as coberturas de IPC e MMT foram aplicadas em mamão minimamente processado para avaliar sua vida- útil. O revestimento com cobertura de isolado protéico de corvina e montmorilonita aplicado em mamão minimamente processado apresentou menor perda de massa 5,26%, menor crescimento microbiano e menor diminuição de firmeza, luminosidade e pH conseqüentemente apresentou os melhores resultados na cobertura de mamão minimamente processado, quando comparados com a amostra controle sem cobertura.
Resumo:
Low-temperature magneto-photoluminescence is a very powerful technique to characterize high purity GaAs and InP grown by various epitaxial techniques. These III-V compound semiconductor materials are used in a wide variety of electronic, optoelectronic and microwave devices. The large binding energy differences of acceptors in GaAs and InP make possible the identification of those impurities by low-temperature photoluminescence without the use of any magnetic field. However, the sensitivity and resolution provided by this technique rema1ns inadequate to resolve the minute binding energy differences of donors in GaAs and InP. To achieve higher sensitivity and resolution needed for the identification of donors, a magneto-photoluminescence system 1s installed along with a tunable dye laser, which provides resonant excitation. Donors 1n high purity GaAs are identified from the magnetic splittings of "two-electron" satellites of donor bound exciton transitions 1n a high magnetic field and at liquid helium temperature. This technique 1s successfully used to identify donors 1n n-type GaAs as well as 1n p-type GaAs in which donors cannot be identified by any other technique. The technique is also employed to identify donors in high purity InP. The amphoteric incorporation of Si and Ge impurities as donors and acceptors in (100), (311)A and (3ll)B GaAs grown by molecular beam epitaxy is studied spectroscopically. The hydrogen passivation of C acceptors in high purity GaAs grown by molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD) 1s investigated using photoluminescence. Si acceptors ~n MBE GaAs are also found to be passivated by hydrogenation. The instabilities in the passivation of acceptor impurities are observed for the exposure of those samples to light. Very high purity MOCVD InP samples with extremely high mobility are characterized by both electrical and optical techniques. It is determined that C is not typically incorporated as a residual acceptor ~n high purity MOCVD InP. Finally, GaAs on Si, single quantum well, and multiple quantum well heterostructures, which are fabricated from III-V semiconductors, are also measured by low-temperature photoluminescence.
Resumo:
Olive (Olea europaea L.), one of the main crops in the Mediterranean basin, is mainly propagated by cuttings, a classical propagation method that relies on the ability of the cuttings to form adventitious roots. While some cultivars are easily propagated by this technique, some of the most interesting olive cultivars are considered difficult-to-root which poses a challenge for their preservation and commercialization. Therefore, increasing the current knowledge on adventitious root formation is extremely important for species like olive. This research focuses on evaluating the role of free auxins and oxidative enzymes on adventitious root formation of two olive cultivars with different rooting ability - ‘Galega vulgar’ (difficult-to-root) and ‘Cobrançosa’ (easy-to-root). In this context, free auxin levels and enzyme activities were determined in in vitro-cultured ‘Galega vulgar’ microshoots and in semi-hardwood cuttings of cvs. ‘Galega vulgar’ and ‘Cobrançosa’. To attain this goal, an analytical method for the quantification of free indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) was developed, which is based on dispersive liquid-liquid microextraction followed by microwave derivatization (DLLME-MAD) and gas chromatography-mass spectrometry (GC/MS) analysis. The developed method was validated in terms of linearity, recovery, limit of detection (LOD) and limit of quantification (LOQ) and proved to be useful in the analysis of two very different types of plant tissues. The results from auxin quantification in olive samples point at a relationship between free auxin levels and rooting ability of both microshoots and semihardwood cuttings. A defective IBA-IAA conversion, resulting in a peak of free IAA during initiation phase, seems to be associated with low rooting ability. Likewise, differences in the activity of oxidative enzymes also appear to be related with rooting ability. Higher polyphenol oxidases (PPO) activity is likely related with an easyto- root behavior, while the opposite is true for peroxidases (POX) (including IAA oxidase (IAAox)) activity. A possible hypothesis for adventitious root formation in olive microcuttings is presented herein for the first time. Free auxins, oxidative enzymes, alternative oxidase (AOX) and reactive oxygen species (ROS) are some of the factors that may be involved in this highly complex physiological process. Interestingly, while temporal changes in auxin levels were similar between microshoots and semihardwood cuttings, the conclusions obtained from enzyme activity results in microshoots didn’t translate to semi-hardwood tissues, showing the emerging need for adaptation of classical agronomical research studies to modern techniques; Resumo: Procurando compreender o papel das auxinas e enzimas oxidativas na formação de raízes adventícias em cultivares de oliveira (Olea europaea L.) A oliveira (Olea europaea L.) é uma das principais culturas da bacia Mediterrânica e é propagada maioritariamente por estacaria, um processo altamente dependente da capacidade das estacas para formar raízes adventícias. Enquanto algumas cultivares são fáceis de propagar desta forma, algumas das cultivares de oliveira mais interessantes são consideradas difíceis de enraizar, o que dificulta a sua preservação e comercialização e torna extremamente importante aprofundar o conhecimento sobre o enraizamento adventício desta espécie. Este trabalho foca-se na avaliação do papel das auxinas livres e das enzimas oxidativas na formação de raízes adventícias em duas cultivares de oliveira com diferente capacidade de enraizamento - ‘Galega vulgar’ (difícil de enraizar) e ‘Cobrançosa’ (fácil de enraizar). Neste contexto, determinaram-se os níveis de auxinas livres e as actividades de enzimas oxidativas em microestacas de ‘Galega vulgar’ cultivadas in vitro bem como em estacas semi-lenhosas das cvs. ‘Galega vulgar’ e ‘Cobrançosa’. Para tal foi necessário desenvolver uma metodologia analítica para a quantificação de ácido indol-3-acético (IAA) e ácido indol-3-butírico (IBA), baseada em microextracção dispersiva líquido-líquido (DLLME) seguida de derivatização em microondas (MAD) e análise por cromatografia gasosa acoplada a espectrometria de massa (GC/MS). O método desenvolvido foi validado em termos de linearidade, recuperação, limite de detecção (LOD) e limite de quantificação (LOQ), e mostrou-se eficaz na análise de dois tipos de tecidos vegetais bastante diferentes. Os resultados da análise de auxinas em amostras de oliveira apontam para uma possível relação entre os níveis de auxinas livres e a capacidade de enraizamento, tanto em microestacas como em estacas semi-lenhosas. Uma conversão IBA-IAA deficiente, que resulta num pico de IAA durante a fase de iniciação, parece estar associada à baixa capacidade de enraizamento. Por outro lado, a capacidade de enraizamento também parece estar relacionada com diferenças na actividade de enzimas oxidativas. Comportamentos fáceis de enraizar estão associados a actividade mais elevada das polifenoloxidases (PPO), enquanto o oposto é verdade para a actividade das peroxidases (POX) (incluindo a IAA oxidase (IAAox)). Neste trabalho propõe-se pela primeira vez uma possível explicação para o enraizamento adventício em microestacas de oliveira. Auxinas livres, enzimas oxidativas, oxidase alternativa (AOX) e espécies reactivas de oxigénio (ROS) são alguns dos factores envolvidos neste processo fisiológico altamente complexo. Curiosamente, enquanto as alterações temporais nos níveis de auxinas foram semelhantes entre microestacas e estacas semi-lenhosas, o mesmo não se observou relativamente à actividade enzimática, o que mostra a necessidade de adaptação dos estudos agronómicos tradicionais às técnicas correntes.