Urban Grass and Grass-Leaf Litter Mixtures as Source for Bioenergy Recovery

Städtische Biomassen der Grünflächen bilden eine potentielle, bisher weitgehend ungenutzte Ressource für Bioenergie. Kommunen pflegen die Grünflächen, lassen das Material aber verrotten oder führen es Deponien oder Müllverbrennungsanlagen zu. Diese Praxis ist kostenintensiv ohne für die Verwaltungen finanziellen Ausgleich bereitzustellen. Stattdessen könnte das Material energetisch verwertet werden. Zwei mögliche Techniken, um Bioenergie zu gewinnen, wurden mit krautigem Material des städtischen Straßenbegleitgrüns untersucht i) direkte anaerobe Fermentation (4 Schnitte im Jahr) und ii) „Integrierte Festbrennstoff- und Biogasproduktion aus Biomasse“ (IFBB), die Biomasse durch Maischen und mechanisches Entwässern in einen Presssaft und einen Presskuchen trennt (2 Schnitte im Jahr). Als Referenz wurde die aktuelle Pflege ohne Verwertungsoption mitgeführt (8faches Mulchen). Zusätzlich wurde die Eignung von Gras-Laub-Mischungen im IFBB-Verfahren untersucht. Der mittlere Biomasseertrag war 3.24, 3.33 und 5.68 t Trockenmasse ha-1 jeweils für die Pflegeintensitäten Mulchen, 4-Schnitt- und 2-Schnittnutzung. Obwohl die Faserkonzentration in der Biomasse der 2-Schnittnutzung höher war als im Material der 4-Schnittnutzung, unterschieden sich die Methanausbeuten nicht signifikant. Der Presskuchen aus dem krautigen Material des Straßenbegleitgrüns hatte einen Heizwert von 16 MJ kg-1 Trockenmasse, während der Heizwert des Presskuchens der Gras-Laub-Mischung in Abhängigkeit vom Aschegehalt zwischen 15 und 17 MJ kg-1 Trockenmasse lag. Der Aschegehalt der Mischungen war höher als der Grenzwert nach DIN EN 14961-6:2012 (für nicht-holzige Brennstoffe), was auf erhöhte Bodenanhaftung auf Grund der Erntemethoden zurückzuführen sein könnte. Der Aschegehalt des krautigen Materials vom Straßenrand hielt die Norm jedoch ein. Die Elementkonzentration (Ca, Cl, K, Mg, N, Na, P, S, Al, Cd, Cr, Cu, Mn, Pb, Si, Zn) im krautigen Material war generell ähnlich zu Landwirtschafts- oder Naturschutzgrünland. In den Mischungen nahm die Elementkonzentration (Al, Cl, K, N, Na, P, S, Si) mit zunehmendem Laubanteil ab. Die Konzentration von Ca, Mg und der Neutral-Detergenz-Fasern stieg hingegen an. Die IFBB-Technik reduzierte die Konzentrationen der in der Verbrennung besonders schädlichen Elemente Cl, K und N zuverlässig. Außer den potentiell hohen Aschegehalten, wurde während der Untersuchungen kein technischer Grund entdeckt, der einer energetischen Verwertung des getesteten urbanen Materials entgegenstehen würde. Ökonomische, soziale und ökologische Auswirkungen einer Umsetzung müssen beachtet werden. Eine oberflächliche Betrachtung auf Basis des bisherigen Wissens lässt hoffen, dass eine bioenergetische Verwertung städtischen Materials auf allen Ebenen nachhaltig sein könnte.

Entwicklung eines ökonomisch ausgerichteten Zuchtprogramms für die bedrohte Schweinerasse „Bunte Bentheimer“

Das Ziel dieser Arbeit war, ein ökonomisch ausgerichtetes Zuchtprogramm für die bedrohte Schweinerasse „Bunte Bentheimer“ (BB) zu entwickeln. Ein wesentlicher Bestandteil von Zuchtprogrammen für bedrohte Rassen ist der Erhalt der genetischen Diversität durch Vermeidung von weiterer Inzucht und Reduzierung des Inzuchtzuwachses. In Kapitel 2 wurde die Population der BB unter Berücksichtigung der vorhandenen Abstammungsinformationen in Bezug auf genetische Diversität, Inzucht und Verwandtschaft analysiert. Durchschnittlicher Inzuchtkoeffizient und Inzuchtzunahme lagen mit 12% und 1,66% pro Generation auf einem relativ hohen Niveau. Effektive Maßnahmen zur Inzuchtkontrolle sollten daher im Zuchtprogramm integriert werden. Durch die Bestimmung optimaler Einsatzfrequenzen selektierter Tiere ist es möglich, Inzucht zu kontrollieren und gleichzeitig Zuchtfortschritt zu generieren. Das konnte am Beispiel von Zuchtwerten für Fruchtbarkeitsmerkmale gezeigt werden. Basierend auf den optimalen Einsatzfrequenzen der selektierten Elterntiere wurden zur weiteren Reduzierung der Inzucht in der Folgegeneration konkrete Anpaarungspläne erstellt. Die Anpaarungen wurden unter Berücksichtigung der Natursprungproblematik durch Festlegung von Zuchtgebieten konzipiert. Die Umsetzung dieser wurde allerdings erschwert durch die eingeschränkte Verfügbarkeit der Eber. Schließt man die künstliche Besamung als mögliche Alternative aus, müssten die Zuchtgebiete so optimiert werden, dass die vorgeschlagenen Anpaarungen auch in die Praxis umgesetzt werden können. Die Gestaltung eines Zuchtprogramms erfordert zudem die Verfügbarkeit populationsgenetischer Parameter. Für die Fruchtbarkeitsmerkmale „Anzahl lebend geborener Ferkel“ (NBA) und „abgesetzter Ferkel“ (NW) lagen die Heritabilitäten bei jeweils 12%. Auch die genetischen Varianzen lagen in einem guten Bereich, so dass für beide Merkmale Zuchtfortschritt durch Selektion möglich ist. In Kapitel 3 wurden genetische Parameter für Fleischleistungs- und Fleischqualitätsmerkmale geschätzt. Als Grundlage dafür dienten sowohl in vivo Ultraschallmessungen am lebenden Tier, als auch Messungen, die am Schlachtkörper bzw. an einer Fleischprobe erfolgten. Zucht-, Mast- und Schlachttiere wurden am RYR1 Genort typisiert, um Allel-Substitutionseffekte zu schätzen. Die quantitativen- und molekulargenetischen Ansätze wurden genutzt, um darauf aufbauend zur Verbesserung der Fleischqualität Zuchtstrategien zu entwickeln. Für das Fleischqualitätsmerkmal intramuskulärer Fettgehalt (IMF) wurde die höchste Heritabilität von 0,78 bei einer ebenfalls hohen additiv-genetischen Varianz geschätzt. Dennoch ist die Erfassung dieses Merkmals mit einem hohen Kostenaufwand verbunden. Ein mögliches Hilfsmerkmal ist die Rückenspeckdicke (BFiv), die direkt am Selektionskandidaten erfasst werden kann. Die genetische Korrelation zwischen beiden Merkmale lag bei rg = 0,39. Die Assoziationsstudie am RYR1 Genort zeigte, dass die Anwesenheit des ungewünschten Allels einen negativen Effekt auf IMF hatte, d.h. der IMF Gehalt wurde reduziert. Darauf aufbauend wurde eine Zuchtstrategie entwickelt, die Phänotyp (BFiv) und Marker-Informationen am RYR1 Genort des Selektionskandidaten kombiniert. Durch die zusätzliche Berücksichtigung der Marker-Informationen konnten eine höhere Genauigkeit und ein höherer Zuchtfortschritt erzielt werden im Vergleich zu einer Strategie, die nur auf den phänotypischen Leistungen basiert. In Kapitel 4 wurde basierend auf einer Konsumentenbefragung mit integrierter Verkostung von Fleischproben indirekt die Zahlungsbereitschaft für unterschiedliche Fleischqualitäten erfasst. Alle Fleischproben wurden zusätzlich hinsichtlich der instrumental erfassbaren Fleischqualität untersucht und durch ein geschultes Panel im Sensorik Labor in Bezug auf die sensorische Qualität beurteilt. Außerdem wurde die direkte Zahlungsbereitschaft für unterschiedliche Qualitätsausprägungen der optischen Merkmale „Fleischfarbe“, „Fleischmarmorierung“ und „Fleischsaftverlust“ anhand von Fotografien erfasst. Die Ergebnisse dieser Befragung wurden genutzt, um ökonomischen Gewichte abzuleiten. Für IMF ergab sich ein hohes ökonomisches Gewicht von 57,52 € pro Merkmalseinheit bei dem aktuellen Populationsdurchschnitt von 1,57%. Mit steigendem Populationsmittel sinkt das ökonomische Gewicht und nähert sich ab einem Mittelwert von 2% einem Wert von 0,00 €. Aus züchterischer Sicht wäre daher ein durchschnittlicher IMF Gehalt von mindestens 2% anzustreben. Für Fleischqualitätsmerkmale, die beim Verzehr nicht direkt erfassbar sind, wie die Farbhelligkeit oder der Tropfsaftverlust, ist die direkte Methode zur Erfassung der Zahlungsbereitschaft (basierend auf den Fotografien) der indirekten (basierend auf der Verkostung) vorzuziehen, um ökonomische Gewichte abzuleiten. Genetische Parameter ökonomischen Gewichte wurden anschließend für Zuchtplanungsrechnungen verwendet. Im Zuchtziel wurde in erster Linie die Fruchtbarkeit (NBA) und Fleischqualität (IMF) berücksichtigt. Zur Vermeidung hoher Kosten und der besseren Anpassung an kleine Betriebsstrukturen wurde u.a. ein Zuchtprogramm modelliert, das auf in vivo Ultraschallmessungen für BFiv basiert, direkt erfasst am Selektionskandidaten. Der Züchtungsgewinn für diese Zuchtstrategie lag bei 35,92 € pro Tier. Der Zuchtfortschritt für IMF war allerdings erwartungsgemäß geringer als bei direkter Selektion auf das Merkmal. Basierend auf den Ergebnissen wurde in Kapitel 5 ein Entwurf für ein Zuchtprogramm erstellt, das die notwendigen Maßnahmen zur Inzuchtkontrolle beinhaltet und Zuchtfortschritt für rassespezifische Merkmale zulässt. Zudem ist dieser Entwurf angepasst an die kleinen Betriebsstrukturen und die unterschiedlichen Vermarktungsstrategien, die sich bereits etabliert haben.

Heat stress response for physiological traits in dairy and dual purpose cattle populations on phenotypic and genetic scales

The main objective of this thesis was to determine the potential impact of heat stress (HS) on physiological traits of lactating cows and semen quality of bulls kept in a temperate climate. The thesis is comprised of three studies. An innovative statistical modeling aspect common to all three studies was the application of random regression methodology (RRM) to study the phenotypic and genetic trajectory of traits in dependency of a continuous temperature humidity index (THI). In the first study, semen quality and quantity traits of 562 Holstein sires kept on an AI station in northwestern Germany were analyzed in the course of THI calculated from data obtained from the nearest weather station. Heat stress was identified based on a decline in semen quality and quantity parameters. The identified general HS threshold (THI = 60) and the thermoneutal zone (THI in the range from 50 to 60) for semen production were lower than detected in studies conducted in tropical and subtropical climates. Even though adult bulls were characterized by higher semen productivity compared to younger bulls, they responded with a stronger semen production loss during harsh environments. Heritabilities (low to moderate range) and additive genetic variances of semen characteristics varied with different levels of THI. Also, based on genetic correlations genotype, by environment interactions were detected. Taken together, these findings suggest the application of specific selection strategies for specific climate conditions. In the second study, the effect of the continuous environmental descriptor THI as measured inside the barns on rectal temperatures (RT), skin temperatures (ST), vaginal temperatures (VT), respiration rates (RR), and pulse rate (PR) of lactating Holstein Friesian (HF) and dual-purpose German black pied cattle (DSN) was analyzed. Increasing HS from THI 65 (threshold) to THI 86 (maximal THI) resulted in an increase of RT by 0.6 °C (DSN) and 1 °C (HF), ST by 3.5 °C (HF) and 8 °C (DSN), VT by 0.3 °C (DSN), and RR by 47 breaths / minute (DSN), and decreased PR by 7 beats / minute (DSN). The undesired effects of rising THI on physiological traits were most pronounced for cows with high levels of milk yield and milk constituents, cows in early days in milk and later parities, and during summer seasons in the year 2014. In the third study of this dissertation, the genetic components of the cow’s physiological responses to HS were investigated. Heat stress was deduced from indoor THI measurements, and physiological traits were recorded on native DSN cows and their genetically upgraded crosses with Holstein Friesian sires in two experimental herds from pasture-based production systems reflecting a harsh environment of the northern part of Germany. Although heritabilities were in a low range (from 0.018 to 0.072), alterations of heritabilities, repeatabilities, and genetic components in the course of THI justify the implementation of genetic evaluations including heat stress components. However, low repeatabilities indicate the necessity of using repeated records for measuring physiological traits in German cattle. Moderate EBV correlations between different trait combinations indicate the potential of selection for one trait to simultaneously improve the other physiological attributes. In conclusion, bulls of AI centers and lactating cows suffer from HS during more extreme weather conditions also in the temperate climate of Northern Germany. Monitoring physiological traits during warm and humid conditions could provide precious information for detection of appropriate times for implementation of cooling systems and changes in feeding and management strategies. Subsequently, the inclusion of these physiological traits with THI specific breeding values into overall breeding goals could contribute to improving cattle adaptability by selecting the optimal animal for extreme hot and humid conditions. Furthermore, the recording of meteorological data in close distance to the cow and visualizing the surface body temperature by infrared thermography techniques might be helpful for recognizing heat tolerance and adaptability in cattle.

A survey of brassica vegetable smallholder farmers in the Gauteng and Limpopo provinces of South Africa

A study was taken to investigate the types of brassica vegetables mostly grown by smallholder farmers in two provinces of South Africa. Thirty-one smallholder vegetable farmers in the Gauteng province and Waterberg district in the Limpopo province were surveyed. In addition, the study also sought to establish the common diseases, the management strategies used and problems encountered by the farmers. Farmers were interviewed using a questionnaire with closed and open–ended questions. The results indicated that the smallholder farmers mostly grew cabbage (93.6%) as their main brassica crop followed by rape (41.2%). Thirty percent of farmers could not identify or name the predominant disease/s encountered in their fields. Major diseases encountered by farmers surveyed were an unknown disease/s (33.3%), black rot (26.7%), Alternaria leaf spot (6.7%) and white rust (6.7%). Smallholder farmers have inadequate technical information available especially relating to crop diseases, their identification and control. Farmers encountered challenges with black rot disease especially on cabbage, rape and kale and the disease was a problem during winter and summer. Generally, the smallholder farmers used crop rotation (74.2%) as a major practice to manage the diseases experienced. They rotated their brassica vegetables with other crops/vegetables like tomatoes, onions, beetroots and maize. Most of the farmers interviewed (61.3%) did not use chemicals to control diseases, whereas 38.7% of them used chemicals. This was mostly because they lacked information and knowledge, high costs associated with use of chemical fungicides and some were shifting towards organic farming. From the study it was noted that there was a need for technical support to improve farmers’ knowledge on disease identification and control within the surveyed areas.

Effects of shoot pruning and inflorescence thinning on plant growth, yield and fruit quality of greenhouse tomatoes in a tropical climate

The combined effects of shoot pruning (one or two stems) and inflorescence thinning (five or ten flowers per inflorescence) on greenhouse tomato yield and fruit quality were studied during the dry season (DS) and rainy season (RS) in Central Thailand. Poor fruit set, development of undersized (mostly parthenocarpic) fruits, as well as the physiological disorders blossom-end rot (BER) and fruit cracking (FC) turned out to be the prevailing causes deteriorating fruit yield and quality. The proportion of marketable fruits was less than 10% in the RS and around 65% in the DS. In both seasons, total yield was significantly increased when plants were cultivated with two stems, resulting in higher marketable yields only in the DS. While the fraction of undersized fruits was increased in both seasons when plants were grown with a secondary stem, the proportions of BER and FC were significantly reduced. Restricting the number of flowers per inflorescence invariably resulted in reduced total yield. However, in neither season did fruit load considerably affect quantity or proportion of the marketable yield fraction. Inflorescence thinning tended to promote BER and FC, an effect which was only significant for BER in the RS. In conclusion, for greenhouse tomato production under climate conditions as they are prevalent in Central Thailand, the cultivation with two stems appears to be highly recommendable whereas the measures to control fruit load tested in this study did not proof to be advisable.

The competitiveness of domestic rice production in East Africa: A domestic resource cost approach in Uganda

The rapid increase of rice imports in sub-Saharan Africa under the unstable situation in the world rice market during the 2000s has made it an important policy target for the countries in the region to increase self-sufficiency in rice in order to enhance food security. Whether domestic rice production can be competitive with imported rice is a serious question in East African countries that lie close, just across the Arabian Sea, to major rice exporting countries in South Asia. This study investigates the international competitiveness of domestic rice production in Uganda in terms of the domestic resource cost ratio. The results show that rainfed rice cultivation, which accounts for 95% of domestic rice production, does not have a comparative advantage with respect to rice imported from Pakistan, the largest supplier of imported rice to Uganda. However, the degree of non-competitiveness is not serious, and a high possibility exists for Uganda’s rainfed rice cultivation to become internationally competitive by improving yield levels by applying more modern inputs and enhancing labour productivity. Irrigated rice cultivation, though very limited in area, is competitive even under the present input-output structure when the cost of irrigation infrastructure is treated as a sunk cost. If the cost of installing irrigation infrastructure and its operation and maintenance is taken into account, the types of irrigation development that are economically feasible are not large-scale irrigation projects, but are small- and microscale projects for lowland rice cultivation and rain-water harvesting for upland rice cultivation.

Optimising contributions of goat farming to household economic success and food security in three production systems in Ethiopia

The study aims to analyse factors affecting contributions of goat farming to household economic success and food security in three goat production systems of Ethiopia. A study was conducted in three districts of Ethiopia representing arid agro-pastoral (AAP), semi-arid agro-pastoral (SAAP) and highland mixed crop-livestock (HMCL) systems involving 180 goat keeping households. Gross margin (GM) and net benefit (NB1 and NB2) were used as indicators of economic success of goat keeping. NB1 includes in-kind benefits of goats (consumption and manure), while NB2 additionally constitutes intangible benefits (insurance and finance). Household dietary diversity score (HDDS) was used as a proxy indicator of food security. GM was significantly affected by an off-take rate and flock size interaction (P<0.001). The increment of GM due to increased off-take rate was more prominent for farmers with bigger flocks. Interaction between flock size and production system significantly (P<0.001) affected both NB1 and NB2. The increment of NB1 and NB2 by keeping larger flocks was higher in AAP system, due to higher in-kind and intangible benefits of goats in this system. Effect of goat flock size as a predictor of household dietary diversity was not significant (P>0.05). Nevertheless, a significant positive correlation (P<0.05) was observed between GM from goats and HDDS in AAP system, indicating the indirect role of goat production for food security. The study indicated that extent of utilising tangible and intangible benefits of goats varied among production systems and these differences should be given adequate attention in designing genetic improvement programs.

Changes of traditional farming systems and their effects on land degradation and socio-economic conditions in the Inle Lake region, Myanmar

At many locations in Myanmar, ongoing changes in land use have negative environmental impacts and threaten natural ecosystems at local, regional and national scales. In particular, the watershed area of Inle Lake in eastern Myanmar is strongly affected by the environmental effects of deforestation and soil erosion caused by agricultural intensification and expansion of agricultural land, which are exacerbated by the increasing population pressure and the growing number of tourists. This thesis, therefore, focuses on land use changes in traditional farming systems and their effects on socio-economic and biophysical factors to improve our understanding of sustainable natural resource management of this wetland ecosystem. The main objectives of this research were to: (1) assess the noticeable land transformations in space and time, (2) identify the typical farming systems as well as the divergent livelihood strategies, and finally, (3) estimate soil erosion risk in the different agro-ecological zones surrounding the Inle Lake watershed area. GIS and remote sensing techniques allowed to identify the dynamic land use and land cover changes (LUCC) during the past 40 years based on historical Corona images (1968) and Landsat images (1989, 2000 and 2009). In this study, 12 land cover classes were identified and a supervised classification was used for the Landsat datasets, whereas a visual interpretation approach was conducted for the Corona images. Within the past 40 years, the main landscape transformation processes were deforestation (- 49%), urbanization (+ 203%), agricultural expansion (+ 34%) with a notably increase of floating gardens (+ 390%), land abandonment (+ 167%), and marshlands losses in wetland area (- 83%) and water bodies (- 16%). The main driving forces of LUCC appeared to be high population growth, urbanization and settlements, a lack of sustainable land use and environmental management policies, wide-spread rural poverty, an open market economy and changes in market prices and access. To identify the diverse livelihood strategies in the Inle Lake watershed area and the diversity of income generating activities, household surveys were conducted (total: 301 households) using a stratified random sampling design in three different agro-ecological zones: floating gardens (FG), lowland cultivation (LL) and upland cultivation (UP). A cluster and discriminant analysis revealed that livelihood strategies and socio-economic situations of local communities differed significantly in the different zones. For all three zones, different livelihood strategies were identified which differed mainly in the amount of on-farm and off-farm income, and the level of income diversification. The gross margin for each household from agricultural production in the floating garden, lowland and upland cultivation was US$ 2108, 892 and 619 ha-1 respectively. Among the typical farming systems in these zones, tomato (Lycopersicon esculentum L.) plantation in the floating gardens yielded the highest net benefits, but caused negative environmental impacts given the overuse of inorganic fertilizers and pesticides. The Revised Universal Soil Loss Equation (RUSLE) and spatial analysis within GIS were applied to estimate soil erosion risk in the different agricultural zones and for the main cropping systems of the study region. The results revealed that the average soil losses in year 1989, 2000 and 2009 amounted to 20, 10 and 26 t ha-1, respectively and barren land along the steep slopes had the highest soil erosion risk with 85% of the total soil losses in the study area. Yearly fluctuations were mainly caused by changes in the amount of annual precipitation and the dynamics of LUCC such as deforestation and agriculture extension with inappropriate land use and unsustainable cropping systems. Among the typical cropping systems, upland rainfed rice (Oryza sativa L.) cultivation had the highest rate of soil erosion (20 t ha-1yr-1) followed by sebesten (Cordia dichotoma) and turmeric (Curcuma longa) plantation in the UP zone. This study indicated that the hotspot region of soil erosion risk were upland mountain areas, especially in the western part of the Inle lake. Soil conservation practices are thus urgently needed to control soil erosion and lake sedimentation and to conserve the wetland ecosystem. Most farmers have not yet implemented soil conservation measures to reduce soil erosion impacts such as land degradation, sedimentation and water pollution in Inle Lake, which is partly due to the low economic development and poverty in the region. Key challenges of agriculture in the hilly landscapes can be summarized as follows: fostering the sustainable land use of farming systems for the maintenance of ecosystem services and functions while improving the social and economic well-being of the population, integrated natural resources management policies and increasing the diversification of income opportunities to reduce pressure on forest and natural resources.

Farmers’ knowledge and perceptions of potato pests and their management in Uganda

As we initiate entomological research on potato (Solanum tuberosum L.) in Uganda, there is need to understand farmers’ knowledge of existing insect pest problems and their management practices. Such information is important for designing a suitable intervention and successful integrated pest management (IPM) strategy. A farm household survey using a structured questionnaire was conducted among 204 potato farmers in six districts of Uganda (i.e., Kabale, Kisoro, Mbale, Kapchorwa, Mubende, and Kyegegwa) during August and September 2013. Diseases, insect pests, price fluctuations, and low market prices were the four highest ranked constraints in potato production, in order of decreasing importance. Cutworms (Agrotis spp.), aphids (Myzus persicae (Sulzer)), and potato tuber moth (Phthorimaea operculella (Zeller)) were the three most severe insect pests. Ants (Dorylis orantalis Westwood), whiteflies (Bemisia tabaci (Gennadius)), and leafminer flies (Liriomyza huidobrensis (Blanchard)) were pests of moderate importance. Major yield losses are predominantly due to late blight (Phytophthora infestans (Mont.) de Bary) and reached 100% without chemical control in the districts of Kabale, Kisoro, Mbale, and Kapchorwa. On average, farmers had little to moderate knowledge about pest characteristics. The predominant control methods were use of fungicides (72% of respondents) and insecticides (62% of respondents). On average, only 5% of the 204 farmers knew about insect pests and their natural enemies. This lack of knowledge calls for training of both farmers and extension workers in insect pest identification, their biology, and control. Empowering farmers with knowledge about insect pests is essential for the reduction of pesticide misuse and uptake of more environmentally friendly approaches like IPM. Field surveys would need follow-up in order to assess the actual field infestation rates and intensities of each insect pest and compare the results with the responses received from farmers.

Determinants of technical efficiency of freshwater prawn farming in southwestern Bangladesh

This paper estimates a translog stochastic production function to examine the determinants of technical efficiency of freshwater prawn farming in Bangladesh. Primary data has been collected using random sampling from 90 farmers of three villages in southwestern Bangladesh. Prawn farming displayed much variability in technical efficiency ranging from 9.50 to 99.94% with mean technical efficiency of 65%, which suggested a substantial 35% of potential output can be recovered by removing inefficiency. For a land scarce country like Bangladesh this gain could help increase income and ensure better livelihood for the farmers. Based on the translog production function specification, farmers could be made scale efficient by providing more input to produce more output. The results suggest that farmers’ education and non-farm income significantly improve efficiency whilst farmers’ training, farm distance from the water canal and involvement in fish farm associations reduces efficiency. Hence, the study proposes strategies such as less involvement in farming-related associations and raising the effective training facilities of the farmers as beneficial adjustments for reducing inefficiency. Moreover, the key policy implication of the analysis is that investment in primary education would greatly improve technical efficiency.

Microbial response to restoration of tantalite mine soils in western Rwanda

Artisanal columbite-tantalite (coltan) mining has had negative effects on the rural economy in the great Lakes region of Africa through labor deficits, degradation and loss of farmland, food insecurity, high cost of living, and reduced traditional export crop production alongside secondary impacts that remotely affect the quality of air, water, soil, plants, animals, and human wellbeing. The situation is multifaceted and calls for a holistic approach for short and long-term mitigation of such negative effects. This study focuses on the effects of mine land restoration on soil microbiological quality in the Gatumba Mining District of western Rwanda. Some coltan mine wastelands were afforested with pine and eucalyptus trees while farmers directly cultivated others due to land scarcity. Farmyard manure (FYM) is the sole fertilizer applied on the wastelands although it is insufficient to achieve the desired crop yields. Despite this, several multi-purpose plants such as Tithonia diversifolia, Markhamia lutea, and Canavalia brasiliensis thrive in the area and could supplement FYM. The potential for these “new” amendments to improve soil microbial properties, particularly in the tantalite mine soils was investigated. The specific objectives of the study were to: (a) evaluate the effects of land use on soil microbial indices of the tantalite mine soils; (b) investigate the restorative effects of organic amendments on a Technosol; and (c) estimate the short-term N and P supply potential of the soil amendments in the soils. Fresh soils (0-20 cm) from an unmined native forest, two mine sites afforested with pine and eucalyptus forests (pine and eucalyptus Technosols), an arable land, and two cultivated Technosols (Kavumu and Kirengo Technosols) were analyzed for the physicochemical properties. Afterwards, a 28-day incubation (22oC) experiment was conducted followed by measurements of mineral N, soil microbial biomass C, N, P, and fungal ergosterol contents using standard methods. This was followed by a 12-week incubation study of the arable soil and the Kavumu Technosol amended with FYM, Canavalia and Tithonia biomass, and Markhamia leaf litter after which soil microbial properties were measured at 2, 8, and 12 weeks of incubation. Finally, two 4-week incubation experiments each were conducted in soils of the six sites to estimate (i) potential mineralizable N using a soil-sand mixture (1:1) amended with Canavalia and goat manure and (ii) P mineralization mixtures (1:1) of soil and anion exchange resins in bicarbonate form amended with Tithonia biomass and goat manure. In study one, afforestation increased soil organic carbon and total N contents in the pine and eucalyptus Technosols by 34-40% and 28-30%, respectively of that in the native forest soil. Consequently, the microbial biomass and activity followed a similar trend where the cultivated Technosols were inferior to the afforested ones. The microbial indices of the mine soils were constrained by soil acidity, dithionite-extractable Al, and low P availability. In study two, the amendments substantially increased C and N mineralization, microbial properties compared with non-amended soils. Canavalia biomass increased CO2 efflux by 340%, net N mineralization by 30-140%, and microbial biomass C and N by 240-600% and 240-380% (P < 0.01), respectively after four weeks of incubation compared with the non-amended soils. Tithonia biomass increased ergosterol content by roughly 240%. The Kavumu Technosol showed a high potential for quick restoration of its soil quality due to its major responses to the measured biological parameters. In study three, Canavalia biomass gave the highest mineralizable N (130 µg g-1 soil, P < 0.01) in the Kavumu Technosol and the lowest in the native forest soil (-20 µg g-1 soil). Conversely, the mineralizable N of goat manure was negative in all soils ranging from -2.5 µg N g-1 to -7.7 µg N g-1 soil except the native forest soil. However, the immobilization of goat manure N in the “cultivated soils” was 30-70% lower than in the “forest soils” signifying an imminent recovery of the amended soils from N immobilization. The mineralization of goat manure P was three-fold that of Tithonia, constituting 61-71% of total P applied. Phosphorus mineralization slightly decreased after four weeks of incubation due to sulfate competition as reflected in a negative correlation, which was steeper in the Tithonia treatment. In conclusion, each amendment used in this research played a unique role in C, N, and P mineralization and contributed substantially to microbial properties in the tantalite mine soils. Interestingly, the “N immobilizers” exhibited potentials for P release and soil organic carbon storage. Consequently, the combined use of the amendments in specific ratios, or co-composting prior to application is recommended to optimize nutrient release, microbial biomass dynamics and soil organic matter accrual. Transport of organic inputs seems more feasible for smallholder farmers who typically manage small field sizes. To reduce acidity in the soils, liming with wood ash was recommended to also improve P availability and enhance soil biological quality, even if it may only be possible on small areas. Further, afforestation with mixed-species of fast-growing eucalyptus and legume or indigenous tree species are suggested to restore tantalite mine wastelands. It is emphasized most of this research was conducted under controlled laboratory conditions, which exclude interaction with environmental variables. Also fine fractions of the amendments were used compared with the usual practice of applying a mixture of predominantly coarser fractions. Therefore, the biological dynamics reported in the studies here may not entirely reflect those of farmers’ field conditions.

The role of institutions as actors influencing Uganda’s cassava sector

We aim at mapping out a detailed framework that reveals the proportionate flow of cassava and its products along the value chain (VC). Furthermore, we aim at establishing the role of institutions and the linkages between institutions and other VC actors that influence the cassava VC in Uganda. We use both primary and secondary data obtained from four regions in Uganda. Results show that farmers, processors, transporters, traders, consumers and institutions are the major actors. There are four categories of institutions, viz, government, non-government, community based organisations and international agencies. Roles performed by institutions include: development and enforcement of policies, Research and Development (R&D), capacity building, and creation of market access linkages for cassava and its products. Findings reveal that there is no clear nexus and no coordination among farmers/producers, processors, traders, transporters and consumers. However, institutions are well coordinated and play various roles along the VC to influence the dynamics of actors. Policy-wise it is important to establish strong private-public partnerships to bridge the impaired linkages between the actors (farmers/producers, processors, traders, transporters, and consumers) and institutions. Strong partnerships are envisaged to reduce the associated transaction costs amongst the actors.

Meat yield and quality of Tanzania Shorthorn Zebu cattle finished on molasses/maize grain with agro-processing by-products in 90 days feedlot period

This study was conducted to evaluate the effects of feeding molasses or maize grain with agro-processing by-products on yield and quality of meat from Tanzania shorthorn zebu (TSZ) cattle. Forty five steers aged 2.5 to 3.0 years with 200 +/- 5.4 kg body weight were allocated into five dietary treatments namely hominy feed with molasses (HFMO), rice polishing with molasses (RPMO), hominy feed with maize meal (HFMM), rice polishing with maize meal (RPMM) and maize meal with molasses (MMMO). Ad libitum amount of each dietary treatment and hay were offered to nine steers for 90 days. Cooking loss (CL) and Warner Bratzler shear force (WBSF) values were determined on M. longissimus thoracis et lumborum aged for 3, 6, 9 and 12 days. Steers fed on HFMO diet had higher (P < 0.05) nutrient intake (86.39 MJ/d energy; 867 g/d CP), weight gain (919 g/d) and half carcass weight (75.8 kg) than those fed other diets. Meat of steers from all diets was tender with average WBSF values of 47.9 N cm^(−2). The CL (22.0 +/- 0.61%) and WBSF (53.4 +/- 0.70 N cm^(−2)) were highest in meat aged for 3 days followed by 6, 9 and 12 days. WBSF values for meat aged for 9 and 12 days from steers fed HFMO and RPMM diets were similar and lower than those on other dietary treatments x aging periods. Overall, molasses and hominy feed can be used to replace maize meal in feedlot finishing diets to spare its use in animal feeds.

Local food security initiatives: systemic limitations in Vancouver, Canada

This paper approaches the topic of urban/community gardening not through the lens of urban theory per se but in light of basic farming realities such as growing season and land availability. Food security comprises availability and affordability. In the context of North American and Western European societies, only food affordability normally merits public discourse. In practice, governments have little or no means to change food affordability, in view of prevailing capitalistic free-market structures. In the current wave of popular exuberance, civic politicians and others have promoted the belief that community gardening could be the pathway to produce affordable food. The formidable obstacles to this pursuit include the availability of (low-cost) land within the highly-densified city limit, insufficient ambient temperature and water supply during the growing season and the contemporary structure of society. Overcoming these fundamental hurdles carries significant negative environmental and economic consequences.

Family agriculture for bottom-up rural development: a case study of the indigenous Mayan population in the Mexican Peninsula

Since pre-colonial times the indigenous communities of Mayan origin in the state of Quintana Roo, Mexico, widely practice home gardens on a sustainable basis as the principal form of family agriculture. This study analyzes the structural complexity, functional diversity and management strategy of these indigenous home gardens in order to attempt to propose recommendations for improved family farming. The Mayan home gardens are structured into three or more vertical layers of multiple plant species of herbs, shrubs and trees, and horizontally into well-defined zones for production of both domestic and wild animals. The home gardens provide multiple services apart from food and nutrition security. For sustainable bottom-up rural development, we recommend the continuation of multifunctional home gardens.