Ergonomía. Fundamentos para el desarrollo de soluciones ergonómicas

En este texto se presentan algunos conceptos y marcos teóricos útiles para el análisis del trabajo en ergonomía. El objetivo es mostrar los conceptos de base para el estudio del trabajo en la tradición de la ergonomía de la actividad, y analizar de manera general algunos de los modelos empleados para el análisis de una actividad de trabajo. Inicialmente se abordan los principios teóricos de la ergonomía y los principios que provienen de la fisiología, la biomecánica, la psicología y la sociología; también se presentan los acercamientos metodológicos empleados en esta misma perspectiva para el análisis de actividades de trabajo. Se parte del principio de que un estudio ergonómico del trabajo se puede llevar a cabo desde una doble perspectiva: la perspectiva analítica y la perspectiva comprensiva.

Imagem por ressonância magnética da vasculatura da pele humana : viabilidade no contexto clínico

Imagiologia por Ressonância Magnética (IRM) é uma modalidade de imagem médica que está a recuperar o interesse como uma técnica não invasiva no estudo da pele. Tipicamente campos magnéticos de elevada densidade e quipamentos específicos são usados. Este facto limita o usos da técnica a laboratórios e centros de investigação especializados. Neste trabalho estudou-se a viabilidade do uso da IRM no estudo da pele e da sua vasculatura usando equipamento convencional disponível em contexto clínico. Sequências IRM para imagem estrutural e veascular foram optimizadas e testadas para obtenção de imagens da pele do punho de 6 voluntários saudáveis. As sequências observáveis dos vasos, razão sinal-ruído, e razão contraste-ruído. Foi observado que duas sequências volumétricas baseadas em eco de gradiente e com ponderações T1 e T2 forneciam informação complementar em respeito à vasculatura da pele com resoluções espaciais da ordem dos micrómetros, podendo ainda esta informação ser fundida com imagens estruturais das cadamas da pele. Foi igualmente observado que estas sequências fornecem informação útil usando equipamento convencional e perspectiva-se a sua utilização no estudo das vasculatura de tumores cutâneos e na doença vascular periférica.

Imagem por Ressonância Magnética : uma ferramenta poderosa para a Engenharia de Tecidos. Uma revisão atualizada

A Engenharia de Tecidos (ET) é uma área de investigação crescente que se direciona à criação de substitutos biológicos funcionais para vários tecidos do corpo humano. Requer condições específicas favoráveis para a regeneração de tecidos, e o resultado do tecido engenheirado deve ser avaliado objetivamente. A Imagem por Ressonância Magnética (IRM) é uma das técnicas mais promissoras para este efeito. Esta revisão discute as publicações mais recentes acerca das várias técnicas baseadas na IRM disponíveis para a avaliação de tecidos engenheirados e as presentes aplicações da IRM na ET.

A contribuição, do ponto de vista do professor, da Revista Diálogo para o ensino religioso

A Diálogo – Revista de Ensino Religioso – tem contribuído para a formação dos professores no Brasil e na propagação do Ensino Religioso (ER), como área de conhecimento, desde a criação em 1995 até 2005, quando completou 10 anos de criação. Essa contribuição se dá por meio dos temas abordados e também pela ótica dos educadores, que buscam contribuir na elaboração da revista, enviando seus questionamentos e sugestões. A Revista Diálogo é editada pela Paulinas, desde outubro de 1995 e nasceu das aspirações de professores do ER. Criada em pleno debate da Lei de Diretrizes e Bases da Educação Nacional (LDBEN), que em 1997 ocorreu a revisão do Artigo 33,da Lei 9.475/97, que reforçou o ER como disciplina curricular e área de conhecimento a ser ensinado nas escolas públicas do ensino fundamental. O formato da Diálogo foi estudado pelos elaboradores, pensando no(a) professor(a)-leitor(a) do periódico, conforme descreve a editora, Irmã Luzia Sena, em entrevista: “(...) nós começamos do zero(...) pensando no formato da revista, colocando-nos no lugar do professor, como ele queria que fosse”. Da relação entre o professor-leitor e o periódico Diálogo há todo um processo de comunicação e recepção em que produto (a Revista) oportuniza ao público-sujeto-leitor-receptor (o professor) aquisição de conhecimento, de informação. O professor-leitor, por sua vez, retorna esse saber e interfere na elaboração da Revista. Para analisar as 134 Cartas dos Leitores da Revista Diálogo buscou-se agrupá-las em categorias, que facilitam o processo de análise. Da participação dos leitores em se corresponder com a direção da Revista Diálogo, 93 são do sexo feminino, sendo que os universos feminino e masculino que escreveram estão concentrados na região Sudeste do Brasil. Como “Formação” entendeu-se na leitura das cartas que são utilizadas, ao menos, com três fins específicos: na informação e atualização do(a) leitor(a)-receptor(a); como subsídio para atuação do professor em sala de aula e como material de apoio,manuseado pelos estudantes. Ao analisar as cartas, observando a formação e atuação dos receptores da Diálogo conseguiu-se delinear o perfil desse(a) leitor(a). Entre os correspondentes, 46,25% (62 leitores) não especificaram a formação ou a atuação profissional e 31,34% são professores do ER nas redes pública e particular e também religiosos(as). No uso da Revista Diálogo como “subsídios para a atuação em sala de aula”percebe-se a satisfação de 37,31% dos(as) leitores(as). Como o(a) receptor(a)-leitor(a)percebe a revista, pode vir a influenciar em seus sentimentos com relação ao objeto doconhecimento, neste caso o ER. O formato da Revista, a visualização, com imagens, fotos e ilustrações interferem na assimilação do objeto lido. Entre o universo de correspondências, 74 referem-se positivamente a apresentação da Revista Diálogo.

Sediment magnetic properties of glacial till deposited since the Little Ice Age maximum for selected glaciers at Svartisen and Okstindan, northern Norway

Samples of glacial till deposited since the Little Ice Age (LIA) maximum by two glaciers, North Bogbre at Svartisen and Corneliussen-breen at Okstindan, northern Norway, were obtained from transects running from the current glacier snout to the LIA (c. AD 1750) limit. The samples were analysed to determine their sediment magnetic properties, which display considerable variability. Significant trends in some magnetic parameters are evident with distance from the glacier margin and hence length of subaerial exposure. Magnetic susceptibility (X) decreases away from the contemporary snout, perhaps due to the weathering of ferrimagnetic minerals into antiferromagnetic forms, although this trend is generally not statistically significant. Trends in the ratios of soft IRM/hard IRM which are statistically significant support this hypothesis, suggesting that antiferromagnetic minerals are increasing relative to ferrimagnetic minerals towards the LIA maximum. Backfield ratios (IRM -100 mT/SIRM) also display a significant and strong trend towards magnetically harder behaviour with proximity to the LIA maximum. Thus, by employing a chronosequence approach, it may be possible to use sediment magnetics data as a tool for reconstructing glacier retreat in areas where more traditional techniques, such as lichenometry, are not applicable.

The low-latitude boundary layer: Application of ISTP advances to past data

The destruction of the four Cluster craft was a major loss to the planned ISTP effort, of which studies of the magnetopause and low-latitude boundary layer (LLBL) were an important part. While awaiting the re-flight mission, Cluster-II, we have been applying advances in our understanding made using other ISTP craft (like Polar and Wind) and using ground-based facilities (in particular the EISCAT incoherent scatter radars and the SuperDARN HF coherent radars) to measurements of the LLBL made in 1984 and 1985 by the AMPTE-UKS and -IRM spacecraft pair. In particular, one unexplained result of the AMPTE mission was that the electron characteristics could, in nearly all cases, order independent measurements near the magnetopause, such as the magnetic field, ion temperatures and the plasma flow. Studies of the cusp have shown that the precipitation is ordered by the time-elapsed since the field line was opened by reconnection. This insight has allowed us to reanalyse the AMPTE data and show that the ordering by the transition parameter is also due to the variation of time elapsed since reconnection, with the important implication that reconnection usually coats most of the dayside magnetopause with at least some newly-opened field lines. In addition, we can use the electron characteristics to isolate features like RDs, slow-mode shocks and slow-mode expansion fans. The ion characteristics can be used to compute the reconnection rate. We here retrospectively apply these new techniques, developed in the ISTP era, to a much-studied flux transfer event observed by the AMPTE satellites. As a result, we gain new understanding of its cause and structure.

On the cause of a magnetospheric flux transfer event

We present a detailed investigation of a magnetospheric flux transfer event (FTE) seen by the Active Magnetospheric Tracer Explorer (AMPTE) UKS and IRM satellites around 1046 UT on October 28, 1984. This event has been discussed many times previously in the literature and has been cited as support for a variety of theories of FTE formation. We make use of a model developed to reproduce ion precipitations seen in the cusp ionosphere. The analysis confirms that the FTE is well explained as a brief excursion into an open low-latitude boundary layer (LLBL), as predicted by two theories of magnetospheric FTEs: namely, that they are bulges in the open LLBL due to reconnection rate enhancements or that they are indentations of the magnetopause by magnetosheath pressure increases (but in the presence of ongoing steady reconnection). The indentation of the inner edge of the open LLBL that these two models seek to explain is found to be shallow for this event. The ion model reproduces the continuous evolution of the ion distribution function between the sheath-like population at the event center and the surrounding magnetospheric populations; it also provides an explanation of the high-pressure core of the event as comprising field lines that were reconnected considerably earlier than those that are draped over it to give the event boundary layer. The magnetopause transition parameter is used to isolate a field rotation on the boundaries of the core, which is subjected to the tangential stress balance test. The test identifies this to be a convecting structure, which is neither a rotational discontinuity (RD) nor a contact discontinuity, but could possibly be a slow shock. In addition, evidence for ion reflection off a weak RD on the magnetospheric side of this structure is found. The event structure is consistent in many ways with features predicted for the open LLBL by analytic MHD theories and by MHD and hybrid simulations. The de Hoffman-Teller velocity of the structure is significantly different from that of the magnetosheath flow, indicating that it is not an indentation caused by a high-pressure pulse in the sheath but is consistent with the motion of newly opened field lines (different from the sheath flow because of the magnetic tension force) deduced from the best fit to the ion data. However, we cannot here rule out the possibility that the sheath flow pattern has changed in the long interval between the two satellites observing the FTE and subsequently emerging into the magnetosheath; thus this test is not conclusive in this particular case. Analysis of the fitted elapsed time since reconnection shows that the core of the event was reconnected in one pulse and the event boundary layer was reconnected in a subsequent pulse. Between these two pulses is a period of very low (but nonzero) reconnection rate, which lasts about 14 mins. Thus the analysis supports, but does not definitively verify, the concept that the FTE is a partial passage into an open LLBL caused by a traveling bulge in that layer produced by a pulse in reconnection rate.

Response time of the high-latitude dayside ionosphere to sudden changes in the north-south component of the IMF

The time scale of the response of the high-latitude dayside ionospheric flow to changes in the North-South component of the interplanetary magnetic field (IMF) has been investigated by examining the time delays between corresponding sudden changes. Approximately 40 h of simultaneous IMF and ionospheric flow data have been examined, obtained by the AMPTE-UKS and -IRM spacecraft and the EISCAT “Polar” experiment, respectively, in which 20 corresponding sudden changes have been identified. Ten of these changes were associated with southward turnings of the IMF, and 10 with northward turnings. It has been found that the corresponding flow changes occurred simultaneously over the whole of the “Polar” field-of-view, extending more than 2° in invariant latitude, and that the ionospheric response delay following northward turnings is the same as that following southward turnings, though the form of the response is different in the two cases. The shortest response time, 5.5 ± 3.2 min, is found in the early- to mid-afternoon sector, increasing to 9.5 ± 3.0 min in the mid-morning sector, and to 9.5 ± 3.1 min near to dusk. These times represent the delays in the appearance of perturbed flows in the “Polar” field-of-view following the arrival of IMF changes at the subsolar magnetopause. Overall, the results agree very well with those derived by Etemadi et al. (1988, Planet. Space Sci.36, 471) from a general cross-correlation analysis of the IMF Bz and “Polar” beam-swinging vector flow data.

Flow in the high latitude ionosphere: measurements at 15s resolution made using the EISCAT ‘Polar’ experiment

We present a first overview of flows in the high latitude ionosphere observed at 15 s resolution using the U.K.-Polar EISCAT experiment. Data are described from experiments conducted on two days, 27 October 1984 and 29 August 1985, which together span the local times between about 0200 and 2130MLT and cover five different regions of ionospheric flow. With increasing local time, these are: the dawn auroral zone flow cell, the dayside region of low background flows equatorward of the flow cells, the dusk auroral zone flow cell, the boundary region between the dusk auroral zone and the polar cap, and the evening polar cap. Flows in both the equatorward and poleward portions of the auroral zone cells appear to be relatively smooth, while in the central region of high speed flow considerable variations are generally present. These have the form of irregular fluctuations on a wide range of time scales in the early morning dawn cell, and impulsive wave-like variations with periods of a few minutes in the afternoon dusk cell. In the dayside region between the flow cells, the ionosphere is often essentially stagnant for long intervals, but low amplitude ULF waves with a period of about 5 min can also occur and persist for many cycles. These conditions are punctuated at one to two hour intervals by sudden ‘flow burst’ events with impulsively generated damped wave trains. Initial burst flows are generally directed poleward and can peak at line-of-sight speeds in excess of 1 km s^{−1} after perhaps 45 s. Flows in the polar cap are reasonably smooth on time scales of a few minutes and show no evidence for the presence of ULF waves. Under most, but not all, of the above conditions, the beam-swinging algorithm used to determine background vector flows should produce meaningful results. Comparison of these flow data with simultaneous plasma and magnetic field measurements in the solar wind, made by the AMPTE IRM and UKS spacecraft, emphasizes the strong control exerted on high latitude flows by the north-south component of the IMF.

Bayesian inference for a skew-normal IRT model under the centred parameterization

Item response theory (IRT) comprises a set of statistical models which are useful in many fields, especially when there is interest in studying latent variables. These latent variables are directly considered in the Item Response Models (IRM) and they are usually called latent traits. A usual assumption for parameter estimation of the IRM, considering one group of examinees, is to assume that the latent traits are random variables which follow a standard normal distribution. However, many works suggest that this assumption does not apply in many cases. Furthermore, when this assumption does not hold, the parameter estimates tend to be biased and misleading inference can be obtained. Therefore, it is important to model the distribution of the latent traits properly. In this paper we present an alternative latent traits modeling based on the so-called skew-normal distribution; see Genton (2004). We used the centred parameterization, which was proposed by Azzalini (1985). This approach ensures the model identifiability as pointed out by Azevedo et al. (2009b). Also, a Metropolis Hastings within Gibbs sampling (MHWGS) algorithm was built for parameter estimation by using an augmented data approach. A simulation study was performed in order to assess the parameter recovery in the proposed model and the estimation method, and the effect of the asymmetry level of the latent traits distribution on the parameter estimation. Also, a comparison of our approach with other estimation methods (which consider the assumption of symmetric normality for the latent traits distribution) was considered. The results indicated that our proposed algorithm recovers properly all parameters. Specifically, the greater the asymmetry level, the better the performance of our approach compared with other approaches, mainly in the presence of small sample sizes (number of examinees). Furthermore, we analyzed a real data set which presents indication of asymmetry concerning the latent traits distribution. The results obtained by using our approach confirmed the presence of strong negative asymmetry of the latent traits distribution. (C) 2010 Elsevier B.V. All rights reserved.

En jämförelse av olika kommunikationstekniker och systemarkitekturiska lösningar vid uppbyggnad av nätverk i naturen.

Att konstruera ett tidtagningssystem för enduro i skogen leder till flera frågor som måste undersökas och besvaras. Vilken kommunikationsteknik ska användas och vilken systemarkitekturisk lösning passar bäst? Att dra kabel ute i skogen är ett bra sätt att lösa det kommunikationstekniska problemet, lösningen är säker och relativt billig. Visst påverkas priset av distansen mellan olika klienter ute i skogen, men alla positiva egenskaper hos tekniken gör denna kostnad värd sitt pris. De geografiska variationer som kan finnas är de som kan spela ut de övriga teknikerna i form av stabilitet. En snabb resultatförmedling kräver ett system som har en väl uppbyggd systemarkitektur. Vid tidtagning kommer data i form av tider skickas från klienterna direkt till huvudservern, ingen mellanlagring sker utan data lagras centralt vilket förespråkas i IRM. Dessutom kommer ingen redundans att accepteras, vilket även det förespråkas av IRM. Det finns även flera andra parametrar som väger för att välja IRM, vilket är det som rekommenderas utifrån den analys som gjorts i denna uppsats.

RailsTNE : En multimodal informationsplattform i ett interorganisatoriskt nätverk

Att utreda möjligheterna att etablera dataförsörjning riktade mot multimodala transporttjänster är idag av största intresse. Det är också intressant att försöka utnyttja de standarder som tagits fram när en dataförsörjningskedja ska etableras. Detta examensarbete genomfördes på Triona AB i Borlänge. Triona har utvecklat databasen Transport Network Engine (TNE), som idag används för att läsa in data från Nationella VägDataBasen (NVDB) och från skogsnäringen. Målet med arbetet var att ta fram en informationsmodell, som beskriver hur ett transportnät med nätanknutna data, som stödjer multimodala transporter och resor, kan lagras i TNE. En förlängning av målet blev att, utifrån ett givet användarfall, etablera dataförsörjning till TNE och lägga in de nödvändiga datamängderna. TNE bygger på ESRI:s produkter och funktionalitet för hantering av geografisk information och informationsmodell och datahantering i TNE baseras på internationella och svenska standarder. Idag finns all information om järnvägsnätet hos Banverket och det finns ingen koppling mellan Banverkets databas Baninformationssystemet (BIS) och Vägverkets databas NVDB. För att den kopplingen ska kunna ske, krävs att de båda verken kan samarbeta som två stora organisationer i ett väl fungerande nätverk. Ett så kallat interorganisatoriskt nätverk. Det akademiska syftet var att föreslå en arkitekturstrategi som stödjer ett sådant nätverk. Vi upptäckte att arkitekturstrategierna IRM och VBS är uppbyggda för att inrikta sig på enskilda organisationer, och det visade sig svårt att följa en specifik strategi inom ett nätverk med flera organisationer. I vårt användarfall måste nätverket mellan Banverket, Vägverket och Stora Enso samarbeta över organisationsgränserna. Därför behövs en strategi för ett interorganisatoriskt samarbete så att informationen kan struktureras på ett gemensamt sätt. Vi föreslår ett antal idealtypskriterier som vi utgått efter i struktureringen av systemarkitekturen. Den innehåller en informationsmodell för både väg- och järnvägsdata som följer standarden SS 63 70 04. Arbetet avgränsades till att endast innehålla de datamängder som användarfallet kräver. Vi har analyserat KombiTIF-rapporten som är ett avslutat projekt styrt av Banverket på uppdrag av Näringsdepartementet. Rapporten ger ett förslag på en lösning i form av en arena som ska göra data tillgänglig för användning. Vi väljer att se TNE-plattformen som en realisering av denna arena. Enligt vårt förslg så ska TNE-plattformen hämta in det mest grundläggande datat om järnvägsnät och nätanknuten data från BIS och standardiserad information om vägnät och nätanknuten data från NVDB via ett gränssnitt. I framtiden är det möjligt att på samma sätt ta in andra trafiknät såsom Sjöfartsverket, Luftfartsverket och Rikstrafiken. Vi arbetade efter en egen metod som vi tog fram med valda delar från andra metoder; kartläggning, perspektivanalys, verksamhetsanalys, utveckling och utvärdering. Arbetet genomfördes iterativt i de fem olika faserna.

Violinistas e método Suzuki : um estudo com egressos do Centro Suzuki de Santa Maria

A presente pesquisa teve como objetivo investigar as opiniões de violinistas egressos do Centro Suzuki de Santa Maria sobre o método Suzuki, descrevendo as influências do método na vida pessoal desses instrumentistas, examinando as contribuições do ensino através do método e analisando algumas críticas feitas ao método. Neste estudo empreguei o método de survey. Através dele foram selecionados quatorze ex-alunos que começaram a estudar violino pelo método Suzuki com a professora irmã Wilfried. As informações foram coletadas por meio de questionário enviado eletronicamente. Os dados foram confrontados com a literatura sobre o método Suzuki apresentada neste trabalho através de textos do próprio Suzuki (1994) e de outros autores, como Penna (1998a, 1998b), Gerling (1989), Mark (1986), Priest (1989), Hargreaves (1986), entre outros. Entre os resultados desta investigação, pude constatar uma forte concordância com o método por parte dos investigados. Além disso, a maioria deles considera o método Suzuki como o melhor método para o ensino da música e do instrumento, principalmente no que se refere ao ensino para crianças e à sociabilidade que se dá através do tocar em grupo.

Globalização de capacidades tecnológicas inovadoras e o papel de subsidiárias de empresas transnacionais (ETNs) no contexto de países em desenvolvimento: a trajetória de uma empresa do setor de TIC no Brasil

This dissertation seeks to add new evidence to the international debate on globalization of innovation in the developing countries context. Globalization of innovation, in this dissertation, is defined and measured by the types, levels and rate of innovative technological capability accumulation and the underlying technological learning processes (sources of capabilities) at the firm level in late-industrializing countries ¿ or developing countries. This relationship is examined within a large transnational corporation (TNC) subsidiary of the information and communication technology (ICT) sector in Brasil: Motorola do Brasil during over the period from 1996 to 2006. In the international literature there is a strong debate on the extent to which innovative technological capabilities have been spreading internationally. But, the most of the studies are focused on early industrialized countries. In other words, there is still a scarcity of analysis, mainly at the firm level, from the perspective of developing countries. This dissertation supports itself in analytical basis developed in the international literature on accumulation of technological capabilities and learning in the context of developing countries. The learning processes examined in this dissertation are: (i) intra-firm learning processes; (ii) inter-firm learning processes (links between mother and sister companies); and (iii) links between the firm and other organizations of the innovation system (universities, research institutes, among others). Based on first-hand empirical evidence, qualitative and quantitative, collected on the basis of extensive fieldwork, this dissertation examines these issues with adequate level of detail and depth, in this large company in Brazil. The study results suggest that: Concerning the path of the technological capability accumulation, the firm exhibited heterogeneity in the path of accumulation of technological capabilities to distinct functions. For the functions Software Engineering and Process and Management Project the firm reached the Level 6 (Innovative Intermediate Superior), on a scale that ranges from 1 to 7; In relation to technological capability sources, the firm deliberately sought and built sources of knowledge in order to develop and sustain its innovative technological capabilities. The dissertation, thus, contributes to adding new empirical evidence to the debate on globalization of innovative capabilities from a late-industrializing perspective.