Biological response of broiler chickens fed peas (Pisum sativum L.) expressing the bean (Phaseolus vulgaris L.) alpha-amylase inhibitor transgene

The nutritive value of transgenic peas expressing an a-amylase inhibitor (alpha-Ail) was evaluated with broiler chickens. The effects of feeding transgenic peas on the development of visceral organs associated with digestion and nutrient absorption were also examined. The chemical composition of the conventional and the transgenic peas used in this study were similar. In the two feeding trials, that were conducted normal and transgenic peas were incorporated into a maize-soybean diet at concentrations up to 500 g kg(-1). The diets were balanced to contain similar levels of apparent metabolisable energy (AME) and amino acids. In the first trial, the birds were fed the diets from 3 to 17days post-hatching and with levels of transgenic peas at 250 g kg(-1) or greater there was a significant reduction in body weight but an increase in feed intake resulting in deceased feed conversion efficiency. In the second trial, in which the birds were fed diets containing 300 g kg(-1) transgenic peas until 40 days of age, growth performance was significantly reduced. It was also demonstrated that the ileal starch digestibility coefficient (0.80 vs 0.42) was significantly reduced in the birds fed transgenic peas. Determination of AME and ileal digestibility of amino acids in 5-week-old broilers demonstrated a significant reduction in AME (12.12 vs 5.08 MJ kg(-1) DM) in the birds fed the transgenic peas. The AME value recorded for transgenic peas reflected the lower starch digestibility of this line. Real digestion of protein and amino acids was unaffected by treatment. Expression of a-Ail in peas did not appear to affect bird health or the utilisation of dietary protein. However, the significant reduction in ileal digestion of starch in transgenic peas does reduce the utility of this feedstuff in monogastric diets where efficient energy utilisation is required. (c) 2006 Society of Chemical Industry.

Clinically active Crohn's disease in the presence of a low C-reactive protein

Objective. Clinical interest in C-reactive protein (CRP) - a component of the innate immune system - has focused mainly on its worth as an indicator of disease activity. There has been a resurgence of interest in CRP in the Crohn's disease ( CD) literature because several trials of new treatments for active CD have been characterized by both a large proportion of patients with low CRP ( < 10 mg/l) at entry to the trials and by a negative therapeutic outcome. It is therefore of interest to study the clinical characteristics of patients who are thought to have at the same time both active CD and a low CRP. Material and methods. Patients were prospectively recruited as part of the Brisbane IBD clinical and research programme. Subjects were included in the low CRP group only if there were complete datasets for CRP on all occasions of active CD, and CRP was < 10 mg/l. Active disease was defined as CD activity index (CDAI) > 200. The low CRP group was compared with patients in the raised CRP group for a range of clinical variables as well as the major NOD2 variants. Results. There were data sets for 223 CD patients, with a mean disease duration of 12 years. Of these, 22 patients fulfilled the criteria for low CRP. The low CRP group ( group 1) showed significant differences for disease site (p < 0.01) and for BMI (p = 0.006) compared to the raised CRP group ( group 2). Specifically, group 1 had a predominance of pure ileal disease (95% versus 53%) and lack of pure colonic disease (0% versus 24%) compared to group 2, and their BMI was significantly lower (20.3 kg/m(2) versus 25.0 kg/m(2)). Groups 1 and 2 did not differ with respect to Vienna behaviour at diagnosis, smoking, appendicectomy, extra-intestinal manifestations of CD, or NOD2 SNP variants. There was a trend for low CRP patients with previous ileal resection to evolve to a stricturing phenotype. Fat wrapping was noted in 11/13 (85%) of low CRP patients undergoing ileal resections. Conclusions. Patients with CD and a persistently low CRP in the face of active disease were characterized by an almost exclusive ileal disease distribution and a low BMI, compared to those with a raised CRP. These patients had a similar frequency and distribution of NOD2/CARD15 variants. Stricturing ( v inflammatory or penetrating) behaviour may explain some low CRP. Despite the abnormally low BMI, fat wrapping was noted in the majority of low CRP patients undergoing ileal resection.

A IMPORTÂNCIA DAS TICS E DA EDUCAÇÃO COMO PROCESSO COMUNICACIONAL DIALÓGICO NO ENSINO SUPERIOR: Um Estudo da Universidade Estadual de Mato Grosso do Sul

Esta tese teve por objetivo saber como o corpo docente da Universidade Estadual de Mato Grosso do Sul (UEMS) percebe, entende e reage ante a incorporação e utilização das Tecnologias de Informação e Comunicação (TICs) nos cursos de graduação dessa Instituição, considerando os novos processos comunicacionais dialógicos que elas podem proporcionar na sociedade atual. Metodologicamente, a tese é composta por pesquisa bibliográfica, buscando fundamentar as áreas da Educação e Comunicação, assim como a Educomunicação; pesquisa documental para contextualização do lócus da pesquisa e de uma pesquisa exploratória a partir da aplicação de um questionário online a 165 docentes da UEMS, que responderam voluntariamente. Verificou-se que os professores utilizam as TICs cotidianamente nas atividades pessoais e, em menor escala, nos ambientes profissionais. Os desafios estão em se formar melhor esse docente e oferecer capacitação continuada para que utilizem de forma mais eficaz as TICs nas salas de aula. Destaca-se ainda que os avanços em tecnologia e os novos ecossistemas comunicacionais construíram novas e outras realidades, tornando a aprendizagem um fator não linear, exigindo-se revisão nos projetos pedagógicos na educação superior para que estes viabilizem diálogos propositivos entre a comunicação e a educação. A infraestrutura institucional para as TICs é outro entrave apontado, tanto na aquisição como na manutenção desses aparatos tecnológicos pela Universidade. Ao final, propõe-se realizar estudos e pesquisas que possam discutir alterações nos regimes contratuais de trabalho dos docentes, uma vez que, para atuar com as TICs de maneira apropriada, exige-se mais tempo e dedicação do docente.

Multiple receptors for calcitonin gene-related peptide and amylin on guinea-pig ileum and vas deferens

1. The responses of the electrically stimulated guinea-pig ileum and vas deferens to human and rat calcitonin gene-related peptide (CGRP) and amylin were investigated. 2. The inhibition of contraction of the ileum produced by human alpha CGRP was antagonized by human alpha CGRP8-37 (apparent pA2 estimated at 7.15 +/- 0.23) > human alpha CGRP19-37 (apparent pA2 estimated as 6.67 +/- 0.33) > [Tyr0]-human alpha CGRP28-37. The amylin antagonist, AC187, was three fold less potent than CGRP8-37 in antagonizing human alpha CGRP. 3. Both human beta- and rat alpha CGRP inhibited contractions of the ileum, but this was less sensitive to inhibition by CGRP8-37 than the effect of human alpha CGRP. However, CGRP19-37 was twenty times more effective in inhibiting the response to rat alpha CGRP (apparent pA2 estimated as 8.0 +/- 0.1) compared to human alpha CGRP. 4. Rat amylin inhibited contractions in about 10% of ileal preparations; this effect was not antagonized by any CGRP fragment. Human amylin had no action on this preparation. 5. Both human and rat alpha CGRP inhibited electrically stimulated contractions of the vas deferens, which were not antagonized by 3 microM CGRP8-37 or 10 microM AC187. 6. Rat amylin inhibited the stimulated contractions of the vas deferens (EC50 = 77 +/- 9 nM); human amylin was less potent (EC50 = 213 +/- 22 nM). The response to rat amylin was antagonized by 10 microM CGRP8-37 (EC50 = 242 +/- 25 nM) and 10 microM AC187 (EC50 = 610 +/- 22 nM). 7. It is concluded that human alpha CGRP relaxes the guinea-pig ileum via CGRP1-like receptors, but that human beta CGRP and rat alpha CGRP may use additional receptors. These are distinct CGRP2-like and amylin receptors on guinea-pig vas deferens.

The potential use of bio-ultracarbofluids in a standard diesel engine

The replacement of diesel fuel by ultra-carbofluids was perceived to offer the potential to decrease the emissions of environmental pollutants such as carbon dioxide, carbon monoxide, hydrocarbons (HC's) and smoke. Such ultracarbofluids consist of a suspension of coal in fuel oil and water generally in the ratio of 5: 3: 2 plus a small amount of stabilising additive. The literature relating to the economies of coal and fuel oil production, and the production and properties of charcoal and vegetable oils has been critically reviewed. The potential use of charcoal and vegetable oils as replacements for coal and fuel oil are discussed. An experimental investigation was undertaken using novel bio-ultracarbofluid formulations. These differed from an ultracarbofluid by having bio-renewable charcoal and vegetable oil in place of coal and fuel oil. Tests were made with a Lister-Petter 600cc 2-cylinder, 4-stroke diesel engine fitted with a Heenan-Froude DPX 1 water brake dynamometer to measure brake power output, and Mexa-321E and Mexa-211E analysers to measure exhaust pollutants. Measurements were made of engine brake power output, carbon dioxide, carbon monoxide, hydrocarbons and smoke emissions over the speed range 1000 to 3000 rpm at 200 rpm intervals. The results were compared with those obtained with a standard diesel reference fuel. All the bio-ultracarbofluid formulations produced lower brake power outputs (i.e. 5.6% to 20.7% less brake power) but substantially improved exhaust emissions of CO2, CO, HC's and smoke. The major factor in the formulation was found to be the type and amount of charcoal; charcoal with a high volatile content (27.2%) and present at 30% by mass yielded the best results, i.e. only slightly lower brake power output and significantly lower exhaust pollutants.

Nitric oxide in the rat gastrointestinal tract

This study concerns the nature of nitric oxide synthase (NOS) and the role of nitric oxide (NO) in the rat gastrointestinal tract. The major objectives were (i) to characterise NOS isoforms in the gastric glandular mucosa, (ii) to localise NOS isoforms in the rat gastric glandular mucosa, (iii) to investigate the role of NO in carbachol-stimulated gastric mucus secretion, (iv) to investigate the nature of NOS and small intestine. Immunoblotting was performed using polyclonal antisera raised against two peptides found in the rat brain NOS sequence and commercial monoclonal antibodies directed against neuronal and endothelial isoforms of NOS. A160kDa band was detected in brain and gastric mucosal samples with antibodies and antisera directed against neuronal NOS sequences, and a 140kDa band was detected in gastric mucosal samples using an anti-endothelial NOS antibody. An intense 160kDa neuronal NOS band was detected in a high-density fraction of gastric mucosal cells separated on a Percoll gradient. Detection of neuronal NOS by a carboxyl-terminal antiserum in samples of brain, but not of gastric mucosa, could be blocked by the peptide (20g/ml) against which the antibody was raised. After affinity purification, recognition of gastric mucosal NOS was blocked by peptide. Particulate neuronal NOS was found in the brain by immunoblotting while 94% of gastric mucosal enzyme was soluble. Gastric mucosal endothelial NOS was 95% particulate. 95% of NOS activity in the gastric mucosa was due to neuronal NOS. Paraformaldehyde- and acetone-fixed gastric mucosal sections were subject to immunocytochemistry using the above antibodies. Neuronal NOS was localised to the surface mucosal epithelial cells while endothelial NOS was associated with microvessels at the base of the mucosa and to larger vessels in the submucosa. Intragastric administration of carbachol or 16, 16-dimethyl prostaglandin E2 increased the thickness of the rat gastric mucus layer. The NOS inhibitor NG-nitro-L-arginine methyl ester dose-dependently, and selectively, prevented the stimulatory effect of carbachol. Ca2+-independent NOS activity in rat ileal, jejunal and colonic muscle was increased after LPS induction. Ca2+-dependent activity was not affected. Distribution of inducible NOS protein paralleled Ca2+ -independent activity. LPS treatment did not affect the content of neuronal NOS in colonic muscle.

Development of a novel in vitro system for nasal drug delivery development

There is currently, no ideal system for studying nasal drug delivery in vitro. The existing techniques such as the Ussing chamber and cell culture all have major disadvantages. Most importantly, none of the existing techniques accurately represent the interior of the nasal cavity, with its airflow and humidity; neither do they allow the investigation of solid dosage forms.The work in this thesis represents the development of an in vitro model system in which the interior characteristics of the nasal cavity are closely represented, and solid or minimal volume dosage forms can be investigated. The complete nasal chamber consists of two sections: a lower tissue, viability chamber and an upper nasal chamber. The lower tissue viability chamber has been shown, using existing tissue viability monitoring techniques, to maintain the viability of a number of epithelial tissues, including porcine and rabbit nasal tissue, and rat ileal and Payers' patch tissue. The complete chamber including the upper nasal chamber has been shown to provide tissue viability for porcine and rabbit nasal tissue above that available using the existing Ussing chamber techniques. Adaptation of the complete system, and the development of the necessary experimental protocols that allow aerosol particle-sizing, together with videography, has shown that the new factors investigated, humidity and airflow, have a measurable effect on the delivered dose from a typical nasal pump. Similarly, adaptation of the chamber to fit under a confocal microscope, and the development of the necessary protocols has shown the effect of surface and size on the penetration of microparticulate materials into nasal epithelial tissues. The system developed in this thesis has been shown to be flexible, in allowing the development of the confocal and particle-sizing systems. For future nasal drug delivery studies, the ability to measure such factors as the size of the delivered system in the nasal cavity, the depth of penetration of the formulation into the tissue are essential. Additionally, to have access to other data such as that obtained from drug transport in the same system, and to have the tissue available for histological examination represents a significant advance in the usefulness of such an in vitro technique for nasal delivery.

Aspects of signal transduction in the gastrointestinal tract

This study was undertaken to increase knowledge of the mechanisms of inter- and intracellular signalling in the gastrointestinal tract. Specific aims were: to use cell lines to elucidate factors affecting growth of gastric cells, to investigate the distribution and aspects of function of isoforms of protein kinase C in a gastric cell line and in the rat gastrointestinal tract and to determine the presence and regulation of nitric oxide synthase in gastrointestinal tissues from the rat and in cell lines. The gastric cancer cell line HGT-1 was used to investigate control of growth. Increases in cell number were found to be dependent on the seeding density of the cells. In cells plated at low density insulin, epidermal growth factor and gastrin all increased cell number. Gastrin produced a bell-shaped dose response curve with a maximum activity at 5nM. No effect of gastrin was apparent in cells plated at high density. α and β isoforms of protein kinase C were found, by immunoblotting procedures, to be widespread in the gastrointestinal tract of the rat, but protein kinase Cε was confined to the gastric mucosa and gastrointestinal smooth muscle. HGT-1 cells contained protein kinase C α and ε but β or γ were not detected. Preincubation of HGT-1 cells for 24h with 1μM phorbol-12,13-dibutyrate down-regulated protein kinase C α but not ε. The inhibition by the activator of protein kinase C, 12-O-tetradecanoylphorbol 13-acetate (TPA) of the histamine-stimulated increase in cAMP in HGT-1 cells was down regulated by phorbol-12,13-dibutyrate. Inhibition of histamine-stimulation of adenylate cyclase by TPA was Ca2+-dependent and inhibited by the addition of an antibody to protein kinase C α. A role for protein kinase C α in modulating the effect of histamine on adenylate cyclase in HGT-1 cells is suggested. No nitric oxide synthase activity was detected in the gastrointestinal cell lines HGT-l, MKN-45 or CaCo-2. Ca2+-dependent nitric oxide synthase activity was observed in the gastric mucosa and the gastrointestinal smooth muscle from stomach to colon. The gastric: mucosal enzyme was soluble and showed half-maximal activity at 400nM Ca2+. Pretreatment of rats with endotoxin (3mg/kg body weight) induced nitric oxide synthase activity in both jejunal, ileal and colonic mucosa and muscle. A major portion of the induced activity in ileal and colonic mucosa was Ca2+-independent. Nitric oxide synthase activity in a high-density fraction of gastric mucosal cells was inhibited in a dose-dependent fashion by L-nitroarginine, NG-monomethyl-L-arginine, trifluoperazine and L-canavanine (in descending order of potency). Preincubation with okadaic acid and addition of ATPlMg2+ to the homogenisation buffer inhibited enzyme activity, which implies that phosphorylation inhibits gastric mucosal nitric oxide synthase.

The development of a testing procedure for dry friction brakes

A description of the background to testing friction materials for automotive brakes explains the need for a rapid, inexpensive means of assessing their behaviour in a way which is both accurate and meaningful. Various methods of controlling inertia dynamometers to simulate road vehicles are rejected in favour of programming by means of a commercially available XY plotter. Investigation of brake service conditions is used to set up test schedules, and a dynamometer programming unit built to enable service conditions on vehicles to be simulated on a full scale dynamometer. A technique is developed by which accelerated testing can be achieved without operating under overload conditions, saving time and cost without sacrificing validity. The development of programming by XY plotter is described, with a method of operating one XY plotter to programme the machine, monitor its own behaviour, and plot its own results in logical sequence. Commissioning trials are described and the generation of reproducible results in frictional behaviour and material durability is discussed. Teclmiques are developed to cross check the operation of the machine in retrospect, and retrospectively correct results in the event of malfunctions. Sensitivity errors in the measuring circuits are displayed between calibrations, whilst leaving the recorded results almost unaffected by error. Typical results of brake lining tests are used to demonstrate the range of performance parameters which can be studied by use of the machine. Successful test investigations completed on the machine are reported, including comments on behaviour of cast iron drums and discs. The machine shows that materials can repeat their complex friction/ temperature/speed/pressure relationships at a reproducibility of the order of +-0.003u and +~ 0.0002 in. thickness loss during wear tests. Discussion of practical and academic implications completes the report with recommendations for further work in both fields.

Performance, emission and combustion characteristics of an indirect injection (IDI) multi-cylinder compression ignition (CI) engine operating on neat jatropha and karanj oils preheated by jacket water

Renewable non-edible plant oils such as jatropha and karanj have potential to substitute fossil diesel fuels in CI engines. A multi-cylinder water cooled IDI type CI engine has been tested with jatropha and karanj oils and comparisons made against fossil diesel. The physical and chemical properties of the three fuels were measured to investigate the suitability of jatropha and karanj oils as fuels for CI engines. The engine cooling water circuit and fuel supply systems were modified such that hot jacket water preheated the neat plant oil prior to injection. Between jatropha and karanj there was little difference in the performance, emission and combustion results. Compared to fossil diesel, the brake specific fuel consumption on volume basis was around 3% higher for the plant oils and the brake thermal efficiency was almost similar. Jatropha and karanj operation resulted in higher CO 2 and NO x emissions by 7% and 8% respectively, as compared to diesel. The cylinder gas pressure diagram showed stable engine operation with both plant oils. At full load, the plant oils gave around 3% higher peak cylinder pressure than fossil diesel. With the plant oils, cumulative heat release was smaller at low load and almost similar at full load, compared to diesel. At full load, the plant oils exhibited 5% shorter combustion duration. The study concludes that the IDI type CI engine can be efficiently operated with neat jatropha (or karanj) oil preheated by jacket water, after small modifications of the engine cooling and fuel supply circuits. © 2012 Elsevier Ltd.

Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel

De-inking sludge can be converted into useful forms of energy to provide economic and environmental benefits. In this study, pyrolysis oil produced from de-inking sludge through an intermediate pyrolysis technique was blended with biodiesel derived from waste cooking oil, and tested in a multi-cylinder indirect injection type CI engine. The physical and chemical properties of pyrolysis oil and its blends (20 and 30 vol.%) were measured and compared with those of fossil diesel and pure biodiesel (B100). Full engine power was achieved with both blends, and very little difference in engine performance and emission results were observed between 20% and 30% blends. At full engine load, the brake specific fuel consumption on a volume basis was around 6% higher for the blends when compared to fossil diesel. The brake thermal efficiencies were about 3-6% lower than biodiesel and were similar to fossil diesel. Exhaust gas emissions of the blends contained 4% higher CO2 and 6-12% lower NOx, as compared to fossil diesel. At full load, CO emissions of the blends were decreased by 5-10 times. The cylinder gas pressure diagram showed stable engine operation with the 20% blend, but indicated minor knocking with 30% blend. Peak cylinder pressure of the 30% blend was about 5-6% higher compared to fossil diesel. At full load, the peak burn rate of combustion from the 30% blend was about 26% and 12% higher than fossil diesel and biodiesel respectively. In comparison to fossil diesel the combustion duration was decreased for both blends; for 30% blend at full load, the duration was almost 12% lower. The study concludes that up to 20% blend of de-inking sludge pyrolysis oil with biodiesel can be used in an indirect injection CI engine without adding any ignition additives or surfactants.

Effects of engine cooling water temperature on performance and exhaust emission characteristics of a multi-cylinder CI engine operated with Jatropha-Butanol blend

Renewable alternatives such as biofuels and optimisation of the engine operating parameters can enhance engine performance and reduce emissions. The temperature of the engine coolant is known to have significant influence on engine performance and emissions. Whereas much existing literature describes the effects of coolant temperature in engines using fossil derived fuels, very few studies have investigated these effects when biofuel is used as an alternative fuel. Jatropha oil is a non-edible biofuel which can substitute fossil diesel for compression ignition (CI) engine use. However, due to the high viscosity of Jatropha oil, technique such as transesterification, preheating the oil, mixing with other fuel is recommended for improved combustion and reduced emissions. In this study, Jatropha oil was blended separately with ethanol and butanol, at ratios of 80:20 and 70:30. The fuel properties of all four blends were measured and compared with diesel and jatropha oil. It was found that the 80% jatropha oil + 20% butanol blend was the most suitable alternative, as its properties were closest to that of diesel. A 2 cylinder Yanmar engine was used; the cooling water temperature was varied between 50°C and 95°C. In general, it was found that when the temperature of the cooling water was increased, the combustion process enhanced for both diesel and Jatropha-Butanol blend. The CO2 emissions for both diesel and biofuel blend were observed to increase with temperature. As a result CO, O2 and lambda values were observed to decrease when cooling water temperature increased. When the engine was operated using diesel, NOX emissions correlated in an opposite manner to smoke opacity; however, when the biofuel blend was used, NOX emissions and smoke opacity correlated in an identical manner. The brake thermal efficiencies were found to increase slightly as the temperature was increased. In contrast, for all fuels, the volumetric efficiency was observed to decrease as the coolant temperature was increased. Brake specific fuel consumption was observed to decrease as the temperature was increased and was higher on average when the biofuel was used, in comparison to diesel. The study concludes that the effects of engine coolant temperature on engine performance and emission characteristics differ between biofuel blend and fossil diesel operation. The coolant temperature needs to be optimised depending on the type of biofuel for optimum engine performance and reduced emissions.

Combustion of fuel blends containing digestate pyrolysis oil in a multi-cylinder compression ignition engine

Digestate from the anaerobic digestion conversion process is widely used as a farm land fertiliser. This study proposes an alternative use as a source of energy. Dried digestate was pyrolysed and the resulting oil was blended with waste cooking oil and butanol (10, 20 and 30 vol.%). The physical and chemical properties of the pyrolysis oil blends were measured and compared with pure fossil diesel and waste cooking oil. The blends were tested in a multi-cylinder indirect injection compression ignition engine.Engine combustion, exhaust gas emissions and performance parameters were measured and compared with pure fossil diesel operation. The ASTM copper corrosion values for 20% and 30% pyrolysis blends were 2c, compared to 1b for fossil diesel. The kinematic viscosities of the blends at 40 C were 5–7 times higher than that of fossil diesel. Digested pyrolysis oil blends produced lower in-cylinder peak pressures than fossil diesel and waste cooking oil operation. The maximum heat release rates of the blends were approximately 8% higher than with fossil diesel. The ignition delay periods of the blends were higher; pyrolysis oil blends started to combust late and once combustion started burnt quicker than fossil diesel. The total burning duration of the 20% and 30% blends were decreased by 12% and 3% compared to fossil diesel. At full engine load, the brake thermal efficiencies of the blends were decreased by about 3–7% when compared to fossil diesel. The pyrolysis blends gave lower smoke levels; at full engine load, smoke level of the 20% blend was 44% lower than fossil diesel. In comparison to fossil diesel and at full load, the brake specific fuel consumption (wt.) of the 30% and 20% blends were approximately 32% and 15% higher. At full engine load, the CO emission of the 20% and 30% blends were decreased by 39% and 66% with respect to the fossil diesel. Blends CO2 emissions were similar to that of fossil diesel; at full engine load, 30% blend produced approximately 5% higher CO2 emission than fossil diesel. The study concludes that on the basis of short term engine experiment up to 30% blend of pyrolysis oil from digestate of arable crops can be used in a compression ignition engine.

Implementation of chirped fibre Bragg gratings (CFBG) as optical wear sensors

This study discusses the fabrication and implementation of chirped fiber Bragg grating (CFBG) as optical wear sensors. Such a sensor has potential applications in monitoring grinding and milling machines through a safety device to check the wear on a car brake. The CFBG wear sensor has advantages over existing wear sensing techniques as it does not require electrical current to be passed through the sensor itself. This makes it eligible for application in combustible environments such as in the oil and gas industry.

Effect of nitric oxide on apoptotic activity in the rat gastrointestinal tract

The effect of nitric oxide (NO) on apoptosis in the gastrointestinal mucosa was investigated. Experiments involved long-term exposure of rat gastric mucosal cells in vitro to exogenous NO delivered from the NO, donor S-nitroso-N-acetyl-penicillamine, and the effect of intravenous administration of lipopolysaccharide in vivo, in the presence and absence of the selective inhibitor of inducible NO synthase N-(3-(aminomethyl)benzyl) acetamidine (1400 W). S-nitroso-N-acetyl-penicillamine produced a dose-related inhibition of caspase 3-like activity and DNA fragmentation in isolated gastric mucosal cells. Caspase 3-like activity and DNA fragmentation in gastric, ileal and colonic mucosa were increased both 5 and 24 h after injection of lipopolysaccharide (3 mg/kg, i.v.) to rats in vivo. Administration of 1400 W (5 mg/kg, i.v.) immediately after lipopolysaccharide enhanced caspase 3-like activity and DNA fragmentation above that found with lipopolysaccharide alone. In conclusion, data obtained both in vitro and in vivo suggest that NO exerts an anti-apoptotic effect on rat gastrointestinal mucosal cells. © 2001 Elsevier Science B.V.