Análises de elementos arquitetônicos de proteção solar em edificações institucionais na cidade de Natal/RN Diretrizes projetuais

The present work concerns the use of shade elements as architectural elements to block sunlight in public buildings. In a city like Natal, (5o South) the incidence of sunrays in any type of design should be a constant concern for all the architects. Besides, this habit of avoiding insolation in the environment is not a common practice. Within this context, the present work has the objective to dig deep into the knowledge of solar control, studying some cases and verifying its function according to the orientation and the original design of the building, having in mind if the shade elements usually used in the region have achieved their purpose of providing protection against the incidence of direct sun rays. This study considers the position of the shade element (horizontal and vertical), the angle formed between them and the respective facades, and the local of the buildings in relation to their orientation during the summer, winter and equinox solstice. As supporting instruments the solar map of the city and the protractor, for measuring shade angles, were used. It was concluded that in all the cases studied, it was not possible to obtain the maximum use of the elements. It was verified that the best type of shade element (more efficient) for the city of Natal is the mixed type (horizontal and vertical) and that the vertical shade elements are more efficient in the early mornings and late afternoon. The horizontal shade elements are used more effective at midday. We intend to present the results of this study to the architects in the region in order to show them the correct ways of using the shade elements according to the possible orientation on the facade, as a supporting tool at the time of designing a project as well as a subsidy for further discussions on the elaboration of the new urban standards for the city of Natal/RN

Rotina computacional de obtenção, tratamento e visualização de dados oceanográficos

Atualmente, sensores remotos e computadores de alto desempenho estão sendo utilizados como instrumentos principais na coleta e produção de dados oceanográficos. De posse destes dados, é possível realizar estudos que permitem simular e prever o comportamento do oceano por meio de modelos numéricos regionais. Dentre os fatores importantes no estudo da oceanografia, podem ser destacados àqueles referentes aos impactos ambientais, de contaminação antrópica, utilização de energias renováveis, operações portuárias e etc. Contudo, devido ao grande volume de dados gerados por instituições ambientais, na forma de resultados de modelos globais como o HYCOM (Hybrid Coordinate Ocean Model) e dos programas de Reanalysis da NOAA (National Oceanic and Atmospheric Administration), torna-se necessária a criação de rotinas computacionais para realizar o tratamento de condições iniciais e de contorno, de modo que possam ser aplicadas a modelos regionais como o TELEMAC3D (www.opentelemac.org). Problemas relacionados a baixa resolução, ausência de dados e a necessidade de interpolação para diferentes malhas ou sistemas de coordenadas verticais, tornam necessária a criação de um mecanismo computacional que realize este tratamento adequadamente. Com isto, foram desenvolvidas rotinas na linguagem de programação Python, empregando interpoladores de vizinho mais próximo, de modo que, a partir de dados brutos dos modelos HYCOM e do programa de Reanalysis da NOAA, foram preparadas condições iniciais e de contorno para a realização de uma simulação numérica teste. Estes resultados foram confrontados com outro resultado numérico onde, as condições foram construídas a partir de um método de interpolação mais sofisticado, escrita em outra linguagem, e que já vem sendo utilizada no laboratório. A análise dos resultados permitiu concluir que, a rotina desenvolvida no âmbito deste trabalho, funciona adequadamente para a geração de condições iniciais e de contorno do modelo TELEMAC3D. Entretanto, um interpolador mais sofisticado deve ser desenvolvido de forma a aumentar a qualidade nas interpolações, otimizar o custo computacional, e produzir condições que sejam mais realísticas para a utilização do modelo TELEMAC3D.

Contextualização histórica para o estudo da trigonometria e construção do teodolito no ensino fundamental

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Matemática, Programa de Mestrado Profissional em Matemática em Rede Nacional, 2015.

Vestígios paleontológicos do Algar da Manga Larga

O Algar da Manga Larga tem-se revelado uma das mais importantes cavidades verticais em Portugal e, apesar de ser já conhecido pelos espeleólogos desde há mais de trinta anos, continua a fornecer dados com relevante significado científico. No decurso de uma acção de pesquisa espeleológica promovida pela AESDA no referido Algar foi fotografado um conjunto de ossos de carnívoro, jacentes numa galeria a cerca de 95 metros abaixo da entrada da cavidade. As respectivas características morfológicas e biométricas indicavam tratar-se de um grande felídeo, remetendo para espécie actualmente extinta na Europa, nomeadamente o leopardo, Panthera pardus (L., 1758). A evidente importância paleontológica dos testemunhos ósseos levou a que se desencadeasse um conjunto de procedimentos com o objectivo de os salvaguardar adequadamente e de promover o seu estudo. Para esse efeito, realizaram-se os contactos necessários e procedeu-se ao registo e à recolha das peças em apreço atribuindo especial atenção à sua integridade e conservação. Seguiram-se as tarefas ligadas ao estudo biométrico comparativo dos restos osteológicos. A presença deste e outros vestígios faunísticos, nomeadamente de gato-bravo, em zonas profundas e de difícil acesso desta gruta, indiciam a existência de condutas que estão ou estiveram em contacto com o meio exterior, as quais não foram ainda referenciadas. Deste modo, para além do evidente interesse paleontológico da descoberta, é possível serem extrapoladas interpretações com aplicação no âmbito da exegese da própria cavidade, situação que levou já à descoberta de uma galeria não registada. Este trabalho tem vindo a ser amplamente divulgado junto da comunidade espeleológica nacional e internacional, inclusivamente no 14º Congresso Internacional de Espeleologia que se realizou em 2005 na Grécia. O estudo paleontológico está concluído e a aguardar publicação em revista da especialidade (CARDOSO & REGALA, no prelo).

Vazão em soleiras controladas ou não por comportas

Os controladores de caudal, normalmente implementados em sistemas Supervisory control and data acquisition (SCADA), apresentam uma grande relevância no controlo automático de canais de adução. Para garantir que os controladores de caudal sejam fiáveis em todo o seu domínio de funcionamento (em situações de escoamento com ressalto livre ou submerso e de transição entre escoamentos com ressalto livre e ressalto submerso) foram comparados os resultados dos ensaios experimentais com diferentes métodos de cálculo da vazão em comportas e/ou sobre soleiras. O programa de ensaios foi realizado nos canais laboratorial e experimental da Universidade de Évora. Foram realizados ensaios em comportas planas verticais e em soleiras do tipo Waterways Experiment Station (WES) controladas ou não por comportas planas verticais. Em ambos os casos, foram contempladas as situações de escoamento com ressalto livre e submerso. Os resultados obtidos mostram que: a) para as comportas, o método Rajaratnam e Subramanya (1967a) conduz a bons resultados com um erro percentual médio absoluto MAPE < 1% para o escoamento com ressalto livre e MAPE < 4% para o submerso; a transição entre escoamentos foi identificada corretamente por este método; b) para as soleiras, obtiveram-se bons resultados para o escoamento com ressalto livre para o método USACE (1987), com MAPE < 2%, e para o submerso através do método Alves e Martins (2011), com MAPE < 5%; a transição entre escoamentos pode ser considerada adequada de acordo com a curva experimental de Grace (1963); c) para soleiras controladas por comporta, conseguiram-se bons resultados para o escoamento com ressalto livre recorrendo à equação dos orifícios de pequenas dimensões, com MAPE < 1, 5%, e para o submerso com a equação dos orifícios totalmente submersos com MAPE < 1, 6%; em ambos os casos foi necessária calibração do coeficiente de vazão; a transição entre escoamentos foi adequada pelo método de Grace (1963). Com base nos resultados obtidos, foi possível definir um algoritmo de vazão generalizado para comportas e/ou soleiras que permite a determinação da vazão para as situações de escoamento com ressalto livre e submerso incluindo a transição entre escoamentos; ABSTRACT: Flow controllers, usually implemented in Supervisory Control and Data Acquisition (SCADA) systems, are very important in the automatic control of irrigation canal systems. To ensure that flow controllers are reliable for the entire operating range (free or submerged flow and flow transitions) the experimental results were compared with different methods of flow measurement for gates and/or weirs. The test program was conducted in the laboratory flume and in the automatic canal of the University of ´Evora. Tests were carried in sluice gates and in broad-crested weirs controlled or not by sluice gate. In both cases free and submerged flow conditions were analyzed. The results show that: a) for the sluice gates, the method of Rajaratnam e Subramanya (1967a) leads to good results with a mean absolute percentage error (MAPE) < 1% for free flow and MAPE < 4% for submerged flow. The transition between flows is correctly identified by this method; b) for the uncontrolled weir, good results were obtained for free flow with the method USACE (1987) with MAPE < 2%, and for submerged flow by the method Alves e Martins (2011) with MAPE < 5%. The transition between flows can be accurately defined by the experimental curve of Grace (1963); c) for the controlled weir, good results were achieved for the free flow with the small orifice equation with MAPE < 1.5% and for submerged flow with the submerged orifice equation with MAPE < 1.6%; in both cases the calibration of the discharge coefficient is needed. The transition between flows can be accomplished through Grace (1963) method. Based on the obtained results, it was possible to define a generalized flow algorithm for gates and/or weirs that allows flow determination for free and submerged flow conditions including the transition between flows.

Comparação de diferentes tipos de exercício na composição corporal e força em jovens desportistas do sexo feminino

O estudo pretende comparar o efeito de diferentes tipos de exercício físico na composição corporal e força em jovens desportistas do sexo feminino. A amostra foi constituída por vinte e seis desportistas femininas com idades compreendidas entre os 16 e 21 anos. Previamente ao início do estudo foram sujeitas ao 1º momento de avaliação, e após vinte e quatro semanas realizaram o segundo e ultimo momento de avaliação. Os parâmetros avaliados foram a composição corporal através da técnica de absorciometria radiológica de dupla energia; a força isocinética, nomeadamente os momentos de força (peak-torques) e rácios nos músculos extensores e flexores do joelho; a potência muscular nos membros inferiores através dos saltos verticais Squat jump e Countermovement jump. Posteriormente foram separadas em quatro grupos, grupo natação e exercício vibratório (NAT EV; n= 6), grupo natação (NAT; n=6), grupo futsal (FUTS; n= 6) e o grupo de controlo (CONT; n= 8). O grupo (NAT/EV), participou num programa de exercício vibratório (EV), três sessões por semana complementar ao treino de natação. O grupo de (NAT) cumpriu o plano de treino correspondente à disciplina, o grupo de (FUTS) cumpriu o treino referente à respetiva modalidade, o grupo controlo (CONT) realizou somente os exercícios físicos inerentes às aulas de educação física na escola. Resultados: Nas comparações inter grupos, verificou-se no grupo FUTS um aumento de 0,1 (g/m2) ± 0,0 nos valores da DMO-PE, quando comparado com o grupo de CONT, nas comparações intra grupo o grupo de NAT EV registou um acréscimo de 0,1 (g/m2) ± 0,1 nos valores da DMO-TC. Em conclusão, os resultados obtidos sugerem que a modalidade de FUTS promoveu mais alterações na composição corporal, nomeadamente na DMO-PE, no entanto dados conseguidos pelo grupo de NAT EV sugerem que o exercício vibratório poderá influenciar positivamente o incremento da DMO; ABSTRACT: The objective of this study was to compare the effect of different types of exercise on body composition and strength in young female athletes. The sample consisted of twenty-six female athletes aged between 16 and 21. Before the study there was a 1st evaluation point, after twenty-four weeks there was the 2nd and final evaluation. We evaluated body composition through x-ray absorptiometry technique of dual energy, isokinetic strength, including the peak-torques and ratios in the extensor and flexor muscles of the knee; the muscle power in the lower limbs was evaluatated through the vertical jumps Squat jump and countermovement jump. During the study they were separated into four groups, swimming exercise group and vibration (NAT EV; n = 6), swimming group (NAT; n= 6), footsal group (FUTS; n= 6) and control group (CONT; n= 8). The NAT/EV group, participated in a vibrating exercise program (EV), complementary to swimming training, with three sessions per week. The NAT group fulfilled the corresponding swimming workout plan, FUTS group fulfilled the training related to futsal, the CONT group only performed the usual exercises in physical education classes at school. Results: In intergroup comparisons, there was an increase in FUTS group of 0.1 (g / m2) ± 0.0 in the values of MBD-PE, when compared with the CONT group comparisons in intra-group group NAT EV increased by 0.1 (g / m2) ± 0.1 in BMD-TC values. In conclusion, the results suggest that FUTS group promoted more changes in body composition, particularly in BMD-PE, but data obtained by NAT EV group suggest that vibration exercise can positively influence the increase in BMD.

Feeding habits of the blue shark (Prionace glauca) off the coast of Brazil

Estômagos de 222 tubarões-azuis coletados ao longo da costa brasileira foram analisados, sendo 116 da região nordeste e 106 da região sul. Um total de 51 táxons de presas foram identificados. Os itens mais importantes na região sul foram baleias Mysticeti, teleósteos, o peixe gempilídeo Ruvettus pretiosus e o nomeídeo Arioma bondi. Cefalópodes foram mais diversos, com preferência pelas espécies migradoras verticais Histioteuthis spp., Cranchiidae e o polvo epipelágico Ocythoe tuberculata. Na região nordeste, o tubarão-azul consumiu principalmente teleósteos, incluindo o peixe alepisaurídeo Alepisaurus ferox e o gempilídeo Gempylus serpens. Entre os cefalópodes, Histioteuthis spp. e o polvo epipelágico Tremoctopus violaceus foram os itens principais. Predação sobre cardumes foi ocasional, como observada para Arioma bondi. Aves também foram consumidas em ambas as regiões. Puffinus gravis foi o quinto item mais freqüente na região nordeste. Durante o ciclo migratório reprodutivo, o tubarão-azul costuma predar nas adjacências da termoclina, que é mais profunda na região nordeste e mais perto da superfície na região sul.

De repente, tudo mudou de lugar: refletindo sobre metamorfose urbana e gentrificação em Mossoró-RN

This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.

Reconversão da Quinta do Espírito Santo

Dissertação de Mestrado para a obtenção do grau de Mestre em Arquitectura, apresentada na Faculdade de Arquitectura da Universidade Técnica de Lisboa.

A forma no edifício residencial vertical em Natal : 1969 a 2000 :

This essay focuses on issues related to internal problems of the architecture discipline, specially those related to the aesthetics of the buildings. The universe analyzed in this research is constituted of some of the vertical housing built in Natal from the period of 1969 to 2000. As we could observe there are many different aspects in these apartment buildings external appearance, denoting increasing preoccupations in their formal elaboration in the battlefield for diversity against monotony of the simple prismatic volumetric forms.

O comércio electrónico: realidade algarvia

Dissertação de mest. em Gestão Empresarial, Faculdade de Economia, Univ. do Algarve, 2001

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Automação da drenagem no teste de produção convencional em tanque cilíndrico

This document aims to improve the quality of the production test in vertical tanks with free water drain pipes, through a device to control the draining system. This proposal consists of an interface detector close to the tank bottle and a control valve on the pipe-drain; they are attached to a remote supervisor system, which will be minimizing the human influence in the conclusion of the test result. And for more consciousness the work shows the importance of the wells production test in the attendance and diagnosis of the productive process, informing the large number of tests executed and problems of the procedure adopted in the field today. There are many possible sources of uncertainty in this kind of test as shown in the experiments realized in the field; the object prototype of this dissertation will be made in the field, based upon the definition of parameters and characteristics of the devices proposal. For a better definition of the draining process the action results of the assessment test are shown, especially changed some for the understand ing of the real process. It shows the proposal details and the configuration that will be used in the tank of Monte Alegre s field Production Station, explaining the interface detector kind and the control system. It is the base to a pilot project now in development, named as the new project classified in the status of the new technology and production improvement of PETROBRAS in Rio Grande do Norte and Ceará. This dissertation concludes that the automation of the conventional test with the draining system will bring benefits both economically as metrologically, because it reduces the uncertainty of the test procedures with free water draining, and also decreases the number of tests with problems

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2