Caracterização da frequência de atividades aéreas do golfinho-rotador, Stenella longirostris (Gray, 1828), na Baía dos Golfinhos do Parque Nacional Marinho de Fernando de Noronha

The aerial activities, leaps and slaps with parts of the body in the surface of water, are part of the behavioral repertoire of several species of cetaceans. Among them, the spinner dolphin, Stenella longirostris, shows greater diversity in such behavior. For the spinner dolphins of Fernando de Noronha, the aerial activities are classified as vertical and horizontal, with eight patterns to be noted (tail slap, head slap, motor boating, partial leap, leap, spin, tail over head and tail over head with spin) discriminated between these categories. Such behaviors can be used as a parameter to identify behavioral changes, as well as patterns of daily and seasonal activity. In this manner, this study aimed to characterize the frequency in performance of such activity while the dolphins were within the Dolphin Bay of Fernando de Noronha, and verify possible daily and seasonal hourly fluctuations on such behaviors. The data analyzed in this study was acquired during the period of January 2006 through December 2010, totaling 1431 days of observation from land set point, with 113027 aerial activities registered, daily average of 72,27 (SD=96,10). During 5478h and 54 min of observation the horizontal aerial activity was the most observed and rotation was the most executed pattern. Greater frequency of execution of aerial activity was observed in adults, but for both adults and calves, was observed a predominance of horizontal activities, with spin being the pattern most executed. Positive correlation was observed between the amount of aerial activity performed and the number of animals inside the Bay. Hourly daily fluctuation was observed in the expression of aerial activities by spinner dolphins, and was observed a peak of activity between 8h and 8h59min for the overall frequency relative of aerial activities, as well as for the categories and patterns. Seasonal differences were observed between the rainy and dry season with the greater amount of activity being observed during the rainy season. Nevertheless, the same profile of frequency relative of aerial activity was observed in both seasons with the peak amount being during the same period. When discriminated the aerial activities in categories and patterns, for both seasons, there was a similar pattern of hourly fluctuation; for most of parameters, higher frequency relative of execution of aerial activity remain between 8h and 8h59min

Cutting forces in turning of gray cast iron using silicon nitride based cutting tool

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ovarian mucinous cystadenoma in a gray brocket deer (Mazama gouazoupira)

An ovarian mucinous cystadenoma is described in a gray brocket deer (Mazama gouazoupira). The tumor was histologically characterized by the presence of cysts and proliferation of papillae, both lined by single- or multi-layered pleomorphic epithelial cells that contained alcian blue-positive mucins.

Marginal gingiva discoloration by gray MTA: A case report

Perforation of the root canal during insertion of an intracanal post is a complication of endodontic therapy. Mineral trixoide aggregate (MTA) has been successfully used a sealer in these situations. This material has recently been formulated in white color, allowing its application in areas of esthetic concern. This is a clinical case report of a root perforation sealed with gray MTA that resulted in discoloration of the marginal gingiva. Treatment consisted of replacing gray MTA with white MTA with the aid of a dental operating microscope, producing satisfactory esthetic results.

Implication of the 5-HT(2A) and 5-HT(2C) (but not 5HT(1A)) receptors located within the periaqueductal gray in the elevated plus-maze test-retest paradigm in mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anxiogenic-like effects induced by NMDA receptor activation are prevented by inhibition of neuronal nitric oxide synthase in the periaqueductal gray in mice

Glutamate-NMDA (N-methyl-D-aspartate) receptor activation within the periaqueductal gray (PAG) leads to antinociceptive, autonomic and behavioral responses characterized as the fear reaction. We have recently demonstrated that the vigorous defensive-like behaviors (e.g. jumping and running) and antinociception induced by intra-PAG injection of N-methyl-D-aspartate (NMDA) were completely blocked by prior infusion of N(omega)-propyl-L-arginine (NPLA), a specific neuronal nitric oxide synthesis (nNOS) enzyme inhibitor, into the same midbrain structure. It remains unclear however, whether the inhibition of nNOS within the mouse PAG changes the anxiety-like behavior per se or the effects of the inhibition of nNOS depend on the suppression of downstream of glutamate-NMDA receptor activation. This study investigated whether intra-PAG infusion of NPLA (i) attenuates anxiety in the elevated plus-maze (EPM) and (ii) antagonizes the anxiogenic-like effects induced by intra-PAG injection of NMDA. Test sessions were videotaped and subsequently scored for conventional indices of anxiety (percentage of open arm entries and percentage of open arm time) and locomotor activity (closed arm entries). Results showed that intra-PAG infusions of NPLA (0.2, 0.4 or 0.8 nmol/0.1 mu l) did not alter significantly any behavioral response in the EPM when compared to control group (Experiment 1). Intra-PAG infusion of NMDA (0 and 0.02 nmol/0.1 mu l; a dose that does not provoke vigorous defensive behaviors per se in mice) significantly reduced open arm exploration, confirming an anxiogenic-like effect (Experiment 2). When injected into the PAG 10 min prior local NMDA injection (0.02 nmol/0.1 mu l), NPLA (0.4 nmol/0.1 mu l) was able to revert the anxiogenic-like effect of glutamate-NMDA receptor activation. Neither intra-PAG infusion of NMDA nor NPLA altered closed arm entries, a widely used measure of locomotor activity in the EPM. These results suggest that intra-PAG nitric oxide synthesis does not play a role on anxiety-like behavior elicited during EPM exposure; however its synthesis is important for the proaversive effects produced by activation of glutamate-NMDA receptors located within this limbic midbrain structure. (C) 2008 Elsevier B.V. All rights reserved.

Anxiolytic-like effects produced by bilateral lesion of the periaqueductal gray in mice: Influence of concurrent nociceptive stimulation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ventrolateral periaqueductal gray lesion attenuates nociception but does not change anxiety-like indices or fear-induced antinociception in mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anxiogenic and antinociceptive effects induced by corticotropin-releasing factor (CRF) injections into the periaqueductal gray are modulated by CRF1 receptor in mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphometric analysis of a population of diplopods of the genus Rhinocricus Karsch, 1881

Diplopods belonging to the subclass Helminthomorpha may present one or both leg pairs of the seventh diplosegment modified into structures that aid copulation, called gonopods. These structures are used as a taxonomic trait for the description of most species. In the genus Rhinocricus these structures are closely similar, so that it is difficult to distinguish species only on the basis of this trait. Two species, R. padbergi and R. varians, are found in the same habitat and present gonopods practically identical in shape; together they present a broad colour gradient, ranging from dark brown to light beige. Morphometric data for individuals of the experimental group were submitted to ANOVA and MANOVA, using Hotelling-Lawley Trace and generalized Mahalanobis distances (D 2) tests. The results demonstrated a relationship between size and colour, with darker individuals being larger. On the basis of this preliminary analysis, we may suggest that the two species are distinct since dark individuals are distant from medium- and light-coloured individuals according to the D 2 values. This seems to indicate a possible polymorphism of individuals belonging to R. padbergi which present close proximity in the values obtained. In all analyses, we observed that the main variables were diameter, length and telson size.

α-SiAION: Development and machining test on gray cast iron

The α-SiAlON ceramic cutting tool insert is developed. Silicon nitride and additives powders are pressed and sintered in the form of cutting tool inserts at temperature of 1900 °C. The physics and mechanical properties of the inserts like green density, weight loss, relative density, hardness and fracture toughness are evaluated. Machining studies are conducted on grey cast iron workpiece to evaluate the performance of α-SiAlON ceramic cutting tool. In the paper the cutting tool used in higher speed showed an improvement in the tribological interaction between the cutting tools and the grey cast iron workpiece resulted in a significant reduction of flank wear and roughness, because of better accommodation and the presence of the graphite in gray cast iron. The above results are discussed in terms of their affect at machining parameters on gray cast iron.

Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

During gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.

Additions to the known distribution of Epipompilus aztecus (Cresson, 1869) and E. excelsus (Bradley, 1944) (Hymenoptera: Pompilidae)

Knowledge about the species distribution of Epipompilus Kohl, 1884, is largely based on the records from the species description. Recent efforts in South American bodiversity studies indicate that knowledge about the distribution of Epipompilus species in the region is in an early stage. Two new records of E. aztecus were obtained for the semideciduous Atlantic Forest, in central Brazil, and one record for the Amazonian Forest in northern Brazil, indicating that its distribution extends between Central and South America. The new records of E. excelsus were obtained mainly from the Atlantic Forest highlands, indicating that this species is commonly found in the southeastern South American Central Plateau and restricted to forest ecosystem of this region. © 2010 Eduardo Fernando dos Santos and Fernando Barbosa Noll.