The Role of GIS in DRR: Classifying and Improving GIS Capabilities in Small Towns and Rural Areas

Optimizing GIS capability does not always require that the municipality obtain cutting edge professionals and resources. This paper offers a disaster risk reduction (DRR) design methodology for small towns and rural areas that employs a multi-variable classification system, enabling customization for effective DRR. Determining appropriate GIS capacity requires that a community first be evaluated in order to identify its disaster risk reduction/disaster management (DRR/DM) requirements. These requirements are then considered in conjunction with the municipality's resources to establish the desired capability. Qualification levels for major aspects of GIS capability with respect to DRR/DM are provided along with descriptions of each level and suggested procedures for advancement to the next level. It should be noted that a municipality can be classified at a different level with respect to different variables. Needs vary according to the community, thus attainment of a uniform capability level may not be necessary.

Context-Based Customization of Routing Functions for Web GIS Applications

This poster presentation features three route planning applications developed by the Florida International University GIS Center and the Geomatics program at the University of Florida, and outlines their context based differences. The first route planner has been developed for cyclists in three Florida counties, i.e. Miami Dade County, Broward County, and Palm Beach County. The second route planner computes safe pedestrian routes to schools and has been developed for Miami Dade County. The third route planner combines pre-compiled cultural/eco routes and point-to-point route planning for the City of Coral Gables. This poster highlights the differences in design (user interface) and implementation (routing options) between the three route planners as a result of a different application context and target audience.

Design and Development of Geographical Information System (GIS) Map for Nuclear Waste Streams

A nuclear waste stream is the complete flow of waste material from origin to treatment facility to final disposal. The objective of this study was to design and develop a Geographic Information Systems (GIS) module using Google Application Programming Interface (API) for better visualization of nuclear waste streams that will identify and display various nuclear waste stream parameters. A proper display of parameters would enable managers at Department of Energy waste sites to visualize information for proper planning of waste transport. The study also developed an algorithm using quadratic Bézier curve to make the map more understandable and usable. Microsoft Visual Studio 2012 and Microsoft SQL Server 2012 were used for the implementation of the project. The study has shown that the combination of several technologies can successfully provide dynamic mapping functionality. Future work should explore various Google Maps API functionalities to further enhance the visualization of nuclear waste streams.

GIS layers of seafloor characteristics in the Azores region (North Atlantic), links to files in ArcGIS format

Inventory of some important datasets related to the physical characteristics of the seafloor surrounding the Azores Archipelago. The objective is to ensure that our compilation is readily available for any researchers interested in this type information but also to support institutions responsible for the management and conservation of local resources.

Aplicação de géis de goma guar no processo de clarificação de salmouras e águas produzidas

Produced water is considered the main effluent of the oil industry, due to their increased volume in mature fields and its varied composition. The oil and grease content (TOG) is the main parameter for the final disposal of produced water. In this context, it is of great significance to develop an alternative method based on guar gum gel for the treatment of synthetic produced water, and using as the differential a polymer having high hydrophilicity for clarifying waters contaminated with oil. Thus, this study aims to evaluate the efficiency of guar gum gels in the remotion of oil from produced water. Guar gum is a natural polymer that, under specific conditions, forms three-dimensional structures, with important physical and chemical properties. By crosslinking the polymer chains by borate ions in the presence of salts, the effect salting out occurs, reducing the solubility of the polymer gel in water. As a result, there is phase separation with the oil trapped in the collapsed gel. The TOG was quantified from the spectroscopy in the ultraviolet and visible region. The system was proven to be highly efficient in the removal of dispersed oil from water produced synthetically, reaching removal percentages above 90%.

Glare, a GIS tool to reconstruct the 3D surface of palaeoglaciers

Acknowledgements This research has been supported by the Leverhulme Trust International Network Grant IN-2012-140. Processing and collecting of ground penetrating data in Forgefonna was part of Elend Førre's master's project that was completed in 2009 at the Department of Geography, University of Bergen. We also acknowledge Dr Andreas Bauder for providing the subglacial topography data for Griessgletscher and Simone Tarquini for granting access to the high resolution TIN of Italy, a cut of which is provided to the reader to practice the tools (see Appendix). Referees Dr. Iestyn Barr, Dr. Jeremy Ely and Dr. Marc Oliva are thanked for their constructive comments and tool testing, which significantly improved the final output.

Using GIS and Remote Sensing Technologies to Identify Environmental Variables of Malaria Vector Breeding Sites in Western Kenya

This study used Landsat 8 satellite imagery to identify environmental variables of households with malaria vector breeding sites in a malaria endemic rural district in Western Kenya. Understanding the influence of environmental variables on the distribution of malaria has been critical in the strengthening of malaria control programs. Using remote sensing and GIS technologies, this study performed a land classification, NDVI, Tasseled Cap Wetness Index, and derived land surface temperature values of the study area and examined the significance of each variable in predicting the probability of a household with a mosquito breeding site with and without larvae. The findings of this study revealed that households with any potential breeding sites were characterized by higher moisture, higher vegetation density (NDVI) and in urban areas or roads. The results of this study also confirmed that land surface temperature was significant in explaining the presence of active mosquito breeding sites (P< 0.000). The present study showed that freely available Landsat 8 imagery has limited use in deriving environmental characteristics of malaria vector habitats at the scale of the Bungoma East District in Western Kenya.

UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

GIS technologies and spatial organization patterns among hunter-gatherers: an archaeological case study from Southern Patagonia (southern South America)

This paper discusses some aspects of hunter-gatherer spatial organization in southern South Patagonia, in later times to 10,000 cal yr BP. Various methods of spatial analysis, elaborated with a Geographic Information System (GIS) were applied to the distributional pattern of archaeological sites with radiocarbon dates. The shift in the distributional pattern of chronological information was assessed in conjunction with other lines of evidence within a biogeographic framework. Accordingly, the varying degrees of occupation and integration of coastal and interior spaces in human spatial organization are explained in association with the adaptive strategies hunter-gatherers have used over time. Both are part of the same human response to changes in risk and uncertainty variability in the region in terms of resource availability and environmental dynamics.

Archaeology, Architecture and Digital Adaptation: Developing a GIS for Archaeological Excavation on Crete

This paper is not about the history or archaeology of Priniatikos Pyrgos per se. Rather, it is a review of how the site was recorded using both traditional survey and planning techniques and digital approaches applied through a Geographical Information System (hereafter GIS) during the 2007 through 2010 seasons. Earlier work at the site will necessarily be reviewed, specifically the geophysical survey work of the Istron Geoarchaeological Project and the excavations by Hayden and Tsipopoulou between 2005 and 2006, and regional survey work by Hayden and colleagues in the Vrokastro region (Hayden, this volume, 1999, 2004; Sarris et al. 2005; Shahrukh et al. 2012). The digitisation and incorporation of the latter into the project GIS will be explored in some detail.

Recupero digitale di dati storici e tracce per un turismo culturale nell'area del Centro Cadore: fotogrammetria e GIS nella valorizzazione di un territorio.

La tesi si occupa dell'uso di più tecniche fotogrammetriche e di strumenti GIS nel recupero digitale e nell'integrazione di una molteplicità di dati storici, opportunamente georeferenziati, inerenti l'area del Centro Cadore, ai fini anche della valorizzazione turistico-culturale del territorio. Un ampio spazio viene dato alla caratterizzazione del territorio e delle fonti - cartografiche, fotografiche e testuali - che sono state recuperate ed organizzate in archivio. Le applicazioni fotogrammetriche comprendono la generazione di ortofoto digitali a scala territoriale da immagini storiche e modelli 3D close-range ottenuti con tecniche SfM.

Representações Sociais da Cannabis no Concelho de Góis

A cannabis permanece como a substância ilícita mais consumida no mundo. Defendida por uns e “diabolizada” por outros, constitui uma das substâncias psicoactivas mais polémicas. Alguns autores destacaram já, a importância do estudo das representações sociais das substâncias psicoactivas. No entanto, desconhecem-se investigações que abordem a representação social desta substância num espaço rural. São objectivos deste estudo: 1) conhecer as representações sociais da cannabis no que diz respeito à substância, ao consumidor e ao contexto da utilização, 2) identificar as diferenças existentes entre utilizadores e não utilizadores desta substância da amostra em estudo. Para concretizar estes objectivos, foi realizado um estudo qualitativo que recorreu a uma dupla abordagem etno-metodológica e fenomenológica. Foram realizadas 30 entrevistas a indivíduos residentes nas duas maiores freguesias do concelho de Góis que, depois de transcritas, foram objecto de análise de conteúdo. No espaço rural considerado, a cannabis é maioritariamente representada como uma “droga”, indutora de uma sensação de mal-estar e causadora de dependência. Para os participantes o utilizador é percebido como detentor de características de personalidade negativas, que o induzem ao consumo. Relativamente ao eixo espacial, o espaço rural, e mais especificamente o concelho de Góis é representado como local de consumo e de produção da cannabis herbácea. Há uma distinção clara entre a representação social dos participantes que não utilizam a substância e os que utilizam. O último grupo representa-a como uma “droga leve”, e mostra-se esclarecido sobre as possíveis consequências da sua utilização. Neste grupo é ainda evidente a valorização da cannabis herbácea, em detrimento dos seus derivados. /

CTAMS GeoMedia User Tool Documentation and Technical GIS Concepts, 1998

A user manual for the GeoMedia software program, along with some discussion of digital orthophotos.

Efectos del terreno en la propagación electromagnética en entornos urbanos sobre la región andina, usando el modelo COST 231-Walfisch-Ikegami y herramientas de planificación basadas en GIS

El presente artículo hace parte del desarrollo de un algoritmo que considera la influencia del relieve en la propagación electromagnética para un entorno semi-urbano, trabajando en la banda de UHF (300MHz-3GHz) utilizada en los actuales y futuros sistemas de comunicación inalámbricos (i.e. 800-900MHz en sistemas DAMPS/US-TDMA/IS-136 y GSM). El modelo base, el COST231-Walfisch- Ikegami, empleado en la investigación,demostró beneficios, junto con los Sistemas de Información Geográfica (SIG) y las Herramientas de Planificación, para el desarrollo de los estudios de propagación, estimación de coberturas y análisis de los principales factores que afectan la planificación de un sistema móvil celular. Aquí se describen los conceptos básicos utilizados para el desarrollo del algoritmo aplicado, las consideraciones sobre las cuales se llevaron a cabolas campañas de medidas y el proceso de validación de resultados que comprueban la utilidad del algoritmo desarrollado para la predicción de Path Loss. El trabajo se basó en la fusión del modelo de propagación COST231-Walfisch-Ikegami con laHerramienta de Planificación Cell-View (fundamentada en el SIG ArcView) y la realización de mediciones en la ciudad de Bucaramanga con una unidad móvil de radiocomunicacióny control del espectro radioeléctrico de propiedad del Ministerio de Comunicaciones de Colombia, seccional Bucaramanga. El estudio llevado a cabo para la banda del sistema IS- 136, mostró resultados de simulación y validación que permiten corroborarlas aproximaciones empleadas.