First evidence of Schmallenberg virus introduction in Portugal, 2014

Objectives: Serra da Estrela native (SEN) breed of sheep is one of the most important in Portugal, standing responsible for the production of one of the most internationally recognized cheeses in the world, "Queijo Serra da Estrela” (protected designation of origin). One of the major risks to the sustainability of SEN dairy flocks if footrot, an infectious diseases that causes lameness, decrease in milk production, weight loss and decrease in fertility. The aim of this work was to determine which parameters become decisive for the appearance of footrot in SEN dairy flocks, while establishing associations with environmental and nutritional variables. Materials and Methods: The present study was carried out by performing an especially designed 27 multiple choice questionnaire, based on the underlying causes of lameness in livestock and in the clinical diagnosis performed by the vet techinichian of the clinical cases evaluated at the moment of the inquiry. The survey was performed during the execution of the oficial veterinary health program between February and September of 2014 by a veterinarian team from the Association of SEN Sheep Breeders (ANCOSE). The ovine producers (N=30, with a total of 1270 animals) were randomly selected from the extense area of production of “Queijo Serra da Estrela”. The parameters evaluated in the study were: season and consequent weather changes during the period of the study, floor types, hygiene conditions, bed types, the existence and use of footbaths, location of footbaths, foot trimming and foot hygiene procedures. After the construction of the database and using the Statistical Package for Social Sciences version 16.0 the frequency response for each item was calculated. Results: All SEN livestock producers are proactive in the treatment of lameness (70%). About 99.7% of lameness was related with footroot and most appeared in winter (36.7%). In some occasions there was not a specific season distribution (56.7% rainiest years). From the analyzed farms, 70% use straw as a floor bed, followed by bush (21%). 45.6% of animals were clinically diagnosed with footrot and were sheltered in straw floor. Bed quality is good in 40%, however frequent changes in the floor bed in the preceding 15 days had a higher rate of footroot diagnosed cases (33,23%) compared to monthly changes. Regarding sheepfold animal number, the distribution is proper in 36.7%, elevated in 30%, overcrowded in 6.7% and low in 23.3%. Clinically ill diagnosed animals in last category were the lowest observed (3%). Concerning hoof trimming, 76.7% trims while 23.3% reported not to perform that task. From those that perform trimming, 73.9% do it only when necessary, 21.7% at the time of clipping and 4.4% when the animal is affected. One curious result was that animals who perform trimming at clipping had higher footrot cases (52.6%), unlike those who trim only when necessary (40.2%) or even when animals are clinically ill (0.91%). Mostly all in the presence of footrot choose a local treatment (95.2%) using antibiotic sprays, instead of parenteral antibiotic treatment. Footbath is rarely used in the prevention (13.3%) of this disease and when it is misconceived (25%) and incorrectly formulated (100%). Conclusions: This study was the first performed in Portugal focusing footrot caracterization in native SEN flocks.Economic impact in SEN dairy flocks is atributed to factors such as direct decrease in milk and meat production,early slaughter of affected animals due to non responsive treatment and medical expenses.The most effective eradication method combines first of all the ability to understand the problems of SEN producers and implementation of preventive measures and treatment of footrot.Often linked to lack of formation, the advance age of portuguese producers the mentality and social factors block the advance of veterinarian intervention itself.

Footrot caracterization in serra da estrela native flocks

Objectives: Serra da Estrela native (SEN) breed of sheep is one of the most important in Portugal, standing responsible for the production of one of the most internationally recognized cheeses in the world, "Queijo Serra da Estrela” (protected designation of origin). One of the major risks to the sustainability of SEN dairy flocks if footrot, an infectious diseases that causes lameness, decrease in milk production, weight loss and decrease in fertility.The aim of this work was to determine which parameters become decisive for the appearance of footrot in SEN dairy flocks, while establishing associations with environmental and nutritional variables. Materials and methods: The present study was carried out by performing an especially designed 27 multiple choice questionnaire, based on the underlying causes of lameness in livestock and in the clinical diagnosis performed by the vet techinichian of the clinical cases evaluated at the moment of the inquiry. The survey was performed during the execution of the oficial veterinary health program between February and September of 2014 by a veterinarian team from the Association of SEN Sheep Breeders (ANCOSE). The ovine producers (N=30, with a total of 1270 animals) were randomly selected from the extense area of production of “Queijo Serra da Estrela”. The parameters evaluated in the study were: season and consequent weather changes during the period of the study, floor types, hygiene conditions, bed types, the existence and use of footbaths, location of footbaths, foot trimming and foot hygiene procedures. After the construction of the database and using the Statistical Package for Social Sciences version 16.0 the frequency response for each item was calculated. Results: All SEN livestock producers are proactive in the treatment of lameness (70%). About 99.7% of lameness was related with footroot and most appeared in winter (36.7%). In some occasions there was not a specific season distribution (56.7% rainiest years). From the analyzed farms, 70% use straw as a floor bed, followed by bush (21%). 45.6% of animals were clinically diagnosed with footrot and were sheltered in straw floor. Bed quality is good in 40%, however frequent changes in the floor bed in the preceding 15 days had a higher rate of footroot diagnosed cases (33,23%) compared to monthly changes. Regarding sheepfold animal number, the distribution is proper in 36.7%, elevated in 30%, overcrowded in 6.7% and low in 23.3%. Clinically ill diagnosed animals in last category were the lowest observed (3%). Concerning hoof trimming, 76.7% trims while 23.3% reported not to perform that task. From those that perform trimming, 73.9% do it only when necessary, 21.7% at the time of clipping and 4.4% when the animal is affected. One curious result was that animals who perform trimming at clipping had higher footrot cases (52.6%), unlike those who trim only when necessary (40.2%) or even when animals are clinically ill (0.91%). Mostly all in the presence of footrot choose a local treatment (95.2%) using antibiotic sprays, instead of parenteral antibiotic treatment. Footbath is rarely used in the prevention (13.3%) of this disease and when it is misconceived (25%) and incorrectly formulated (100%). Conclusion: This study is the first performed in Portugal focusing on footrot caracterization in native SEN flocks. The economic impact in SEN dairy flocks is atributed to factors such as the direct decrease in milk and meat production, the early slaughter of affected animals due to a non responsive treatment, and medical expenses. The most effective eradication method combines first of all the ability to understand the problems of SEN producers and then the implementation of preventive measures and treatment of footrot. Often linked to the lack of formation, and the advanced age of portuguese producers, the mentality and social factors block the advance of veterinarian intervention itself.

Vibro-acoustic analysis of additively manufactured acoustic metamaterials

In the last decade it emerged the interest in new types of acoustic insulating materials, called acoustic metamaterials. These materials are composed by a host and inclusions and are arranged periodically or non-periodically in sub-wavelength elements called meta-atoms. Their inclusions and internal geometries can be manipulated to tailor the acoustic properties, reducing weight, and increasing at the same time their efficiency. Thanks to the high absorbing characteristics that they can achieve, their usage is of particularly interest as material of the core in sandwich panels of aerospace structures to reduce vibrations and noise inside passengers aircraft’s cabin. In addition, since the low frequency signals are difficult to be damped with conventional materials, their usage can guarantee a high transmission loss at low frequencies, obtaining a positive benefit on passengers’ comfort. The performances and efficiency of these materials are enhanced thanks to the new additive manufacturing techniques opposed to the conventional ones uncapable to pro- duce such complex internal geometries. The aim of this work is to study, produce and redesign micro-perforated sandwich panels of a literature case study to achieve high performances in the low frequency range, e.g., below 2000 Hz. Some geometrical parameters, such as perforation ratio and diameter of holes, were considered to realize different models and see the differences in the sound transmission loss. The models were produced by means of Fused Deposition Modelling using an Acrylonitrile Butadiene Styrene (ABS Plus p430) material on a commercial additive manufacturing system. Finally, the frequency response analysis was carried out with Mul2 software, based on the Carrera’s Unified Formulation (CUF) to understand the acoustic and structural properties of the material employed, analyzing the plates’ displacements and the TL results.

Analisi vibroacustica di un sistema di scarico per monoposto Formula SAE

Lo scopo del presente lavoro è quello di determinare una metodologia di analisi vibroacustica di validità generale applicabile a tutti i casi nei quali la forzante sia di tipo vibrazionale. Nello specifico si è analizzato il comportamento strutturale e acustico di un impianto di scarico di una monoposto Formula SAE. Ricorrendo all’analisi FEM (Finite Element Method) è possibile determinare e quantificare gli effetti dannosi causati dalle vibrazioni già nella fase di prototipazione permettendo una sostanziale riduzione dei tempi e costi. La determinazione del comportamento strutturale del modello alle vibrazioni è iniziata dall’analisi modale, grazie alla quale sono state determinate le frequenze naturali e i modi propri dell’impianto di scarico. Successivamente, l’analisi FRF (Frequency Response Function) ha permesso di conoscere la risposta del nostro sistema ad una forzante imposta mettendo in luce le diverse criticità strutturali. Con il presupposto di ottenere delle condizioni di carico che fossero il più vicine possibili alle normali condizioni operative si è impostata un’analisi PSD (Power Spectral Density). Per concludere la prima parte dell’analisi si è reso necessario indagare anche il comportamento a fatica vibrazionale, valutando in questo modo le zone soggette a vita finita e quindi le prime a cedere in fase di esercizio. La parte finale è stata dedicata all’analisi del rumore. Dall’analisi FRF si è determinata la SPL (Sound Pressure Level) ottenendo come output un valore di pressione sonora prodotto dall’effetto della propagazione delle onde di pressione generate dalla vibrazione strutturale dell’impianto di scarico. Infine, l’analisi di Transmission Loss ha permesso di valutare l’efficacia della geometria del silenziatore sulla riduzione del livello acustico generato dal transito dei gas di scarico alle diverse frequenze.

NO in the caudal NTS modulates the increase in respiratory frequency in response to chemoreflex activation in awake rats

The role of nitric oxide (NO) in the caudal NTS (cNTS) on baseline cardiovascular and respiratory parameters and on changes in respiratory frequency (fR) and cardiovascular responses to chemoreflex activation was evaluated in awake rats. Bilateral microinjections of L-NAME (200 nmoles/50 nL), a non-selective NO synthase (NOS) inhibitor, into the cNTS increased baseline arterial pressure, while microinjections of NPLA (3 pmoles/50 nL), a selective neuronal NOS (nNOS) inhibitor, did not. L-NAME or N-PLA microinjected into the cNTS reduced the increase in fR in response to chemoreflex activation but not cardiovascular responses. These data show that (a) NO produced by non-nNOS in the cNTS is involved in the baseline autonomic control and (b) NO produced by nNOS in the cNTS is involved in modulation of the increase in fR in response to chemoreflex activation but not in the cardiovascular responses. We conclude that NO produced by the neuronal and endothelial NOS play a different role in the cNTS neurons integral to autonomic and respiratory pathways. (C) 2009 Elsevier B.V. All rights reserved.

Effect of n-3 fatty acids on cerebral markers and the inflammatory response in sepsis

Introduction ICM+ software encapsulates our 20 years' experience in brain monitoring. It collects data from a variety of bedside monitors and produces time trends of parameters defi ned using confi gurable mathematical formulae. To date it is being used in nearly 40 clinical research centres worldwide. We present its application for continuous monitoring of cerebral autoregulation using near-infrared spectroscopy (NIRS). Methods Data from multiple bedside monitors are processed by ICM+ in real time using a large selection of signal processing methods. These include various time and frequency domain analysis functions as well as fully customisable digital fi lters. The fi nal results are displayed in a variety of ways including simple time trends, as well as time window based histograms, cross histograms, correlations, and so forth. All this allows complex information from bedside monitors to be summarized in a concise fashion and presented to medical and nursing staff in a simple way that alerts them to the development of various pathological processes. Results One hundred and fi fty patients monitored continuously with NIRS, arterial blood pressure (ABP) and intracranial pressure (ICP), where available, were included in this study. There were 40 severely headinjured adult patients, 27 SAH patients (NCCU, Cambridge); 60 patients undergoing cardiopulmonary bypass (John Hopkins Hospital, Baltimore) and 23 patients with sepsis (University Hospital, Basel). In addition, MCA fl ow velocity (FV) was monitored intermittently using transcranial Doppler. FV-derived and ICP-derived pressure reactivity indices (PRx, Mx), as well as NIRS-derived reactivity indices (Cox, Tox, Thx) were calculated and showed signifi cant correlation with each other in all cohorts. Errorbar charts showing reactivity index PRx versus CPP (optimal CPP chart) as well as similar curves for NIRS indices versus CPP and ABP were also demonstrated. Conclusions ICM+ software is proving to be a very useful tool for enhancing the battery of available means for monitoring cerebral vasoreactivity and potentially facilitating autoregulation guided therapy. Complexity of data analysis is also hidden inside loadable profi les, thus allowing investigators to take full advantage of validated protocols including advanced processing formulas.

White mold intensity on common bean in response to plant density, irrigation frequency, grass mulching, Trichoderma spp., and fungicide

The purpose of this study was to evaluate the efficiency of integrated managements on white mold control on common bean. Initially, in vitro testing was made to assess the antagonism of 11 Trichoderma isolates against Sclerotinia sclerotiorum and to investigate fungicides (fluazinam and procymidone) inhibitory effects on those fungi. In two field experiments the following combinations were tested: irrigation frequencies (seven or 14 days), plant densities (six or 12 plants per meter), and three disease controls (untreated control, fungicide or Trichoderma spp.). In a third experiment plant densities were replaced by grass mulching treatments (with or without mulching). Fluazinam was applied at 45 and 55 days after emergence (DAE). The antagonists T. harzianum (experiments 1 and 3) and T. stromatica (experiment 2) were applied through sprinkler irrigation at 10 and 25 DAE, respectively. Most of the Trichoderma spp. were effective against the pathogen in vitro. Fluazinam was more toxic than procymidone to both the pathogen and the antagonist. Fungicide applications increased yield between 32 % and 41 %. In field one application of Trichoderma spp. did not reduce disease intensity and did not increase yield. The reduction from 12 to six plants per meter did not decrease yield, and disease severity diminished in one of the two experiments. It is concluded that of the strategies for white mold control just reduction of plant density and applications of fungicide were efficient.

Features of dielectric response in PMN-PT ferroelectric ceramics

In this paper, electrical and structural properties were reported for pyrochlore free (1-x)[Pb(Mg1/3Nb2/3)O-3] - xPbTiO(3) (PMN-PT) (with 35 mol% PbTiO3) ceramics obtained from fine powders. Dielectric studies were focused on the investigation of the complex dielectric permittivity (epsilon '-i epsilon '') as a function of frequency and temperature. The effects of the dc applied electric field on dielectric response were also investigated. Results revealed a field dependence dielectric anomaly in the dielectric permittivity curves (epsilon(T)) in the low dc electric field region, which in turn prevails in the whole analysed frequency interval. To the best of our knowledge, these properties for the PMN-PT ceramic system have not been reported before as in this work. The results were analysed within the framework of the current models found in the literature.

Investigation of the dipole response of nickel isotopes in the presence of a high-frequency electromagnetic field

The electric dipole response of neutron-rich nickel isotopes has been investigated using the LAND setup at GSI in Darmstadt (Germany). Relativistic secondary beams of 56−57Ni and 67−72Ni at approximately 500 AMeV have been generated using projectile fragmentation of stable ions on a 4 g/cm2 Be target and subsequent separation in the magnetic dipole fields of the FRagment Separator (FRS). After reaching the LAND setup in Cave C, the radioactive ions were excited electromagnetically in the electric field of a Pb target. The decay products have been measured in inverse kinematics using various detectors. Neutron-rich 67−69Ni isotopes decay by the emission of neutrons, which are detected in the LAND detector. The present analysis concentrates on the (gamma,n) and (gamma,2n) channels in these nuclei, since the proton and three-neutron thresholds are unlikely to be reached considering the virtual photon spectrum for nickel ions at 500 AMeV. A measurement of the stable 58Ni isotope is used as a benchmark to check the accuracy of the present results with previously published data. The measured (gamma,n) and (gamma,np) channels are compared with an inclusive photoneutron measurement by Fultz and coworkers, which are consistent within the respective errors. The measured excitation energy distributions of 67−69Ni contain a large portion of the Giant Dipole Resonance (GDR) strength predicted by the Thomas-Reiche-Kuhn energy-weighted sum rule, as well as a significant amount of low-lying E1 strength, that cannot be attributed to the GDR alone. The GDR distribution parameters are calculated using well-established semi-empirical systematic models, providing the peak energies and widths. The GDR strength is extracted from the chi-square minimization of the model GDR to the measured data of the (gamma,2n) channel, thereby excluding any influence of eventual low-lying strength. The subtraction of the obtained GDR distribution from the total measured E1 strength provides the low-lying E1 strength distribution, which is attributed to the Pygmy Dipole Resonance (PDR). The extraction of the peak energy, width and strength is performed using a Gaussian function. The minimization of trial Gaussian distributions to the data does not converge towards a sharp minimum. Therefore, the results are presented by a chi-square distribution as a function of all three Gaussian parameters. Various predictions of PDR distributions exist, as well as a recent measurement of the 68Ni pygmy dipole-resonance obtained by virtual photon scattering, to which the present pygmy dipole-resonance distribution is also compared.

Frequency-dependent response of snow in uniaxial compression and comparison with numerical simulation

La determinazione del modulo di Young è fondamentale nello studio della propagazione di fratture prima del rilascio di una valanga e per lo sviluppo di affidabili modelli di stabilità della neve. Il confronto tra simulazioni numeriche del modulo di Young e i valori sperimentali mostra che questi ultimi sono tre ordini di grandezza inferiori a quelli simulati (Reuter et al. 2013)⁠. Lo scopo di questo lavoro è stimare il modulo di elasticità studiando la dipendenza dalla frequenza della risposta di diversi tipi di neve a bassa densità, 140-280 kg m-3. Ciò è stato fatto applicando una compressione dinamica uniassiale a -15°C nel range 1-250 Hz utilizzando il Young's modulus device (YMD), prototipo di cycling loading device progettato all'Istituto per lo studio della neve e delle valanghe (SLF). Una risposta viscoelastica della neve è stata identificata a tutte le frequenze considerate, la teoria della viscoelasticità è stata applicata assumendo valida l'ipotesi di risposta lineare della neve. Il valore dello storage modulus, E', a 100 Hz è stato identificato come ragionevolmente rappresentativo del modulo di Young di ciascun campione neve. Il comportamento viscoso è stato valutato considerando la loss tangent e la viscosità ricavata dai modelli di Voigt e Maxwell. Il passaggio da un comportamento più viscoso ad uno più elastico è stato trovato a 40 Hz (~1.1•10-2 s-1). Il maggior contributo alla dissipazione è nel range 1-10 Hz. Infine, le simulazioni numeriche del modulo di Young sono state ottenute nello stesso modo di Reuter et al.. La differenza tra le simulazioni ed i valori sperimentali di E' sono, al massimo, di un fattore 5; invece, in Reuter et al.⁠, era di 3 ordini di grandezza. Pertanto, i nostri valori sperimentali e numerici corrispondono meglio, indicando che il metodo qui utilizzato ha portato ad un miglioramento significativo.

Comparison of V2IC control with voltage mode and current mode controls for high frequency (MHz) and very fast response applications

High switching frequencies (several MHz) allow the integration of low power DC/DC converters. Although, in theory, a high switching frequency would make possible to implement a conventional Voltage Mode control (VMC) or Peak Current Mode control (PCMC) with very high bandwidth, in practice, parasitic effects and robustness limits the applicability of these control techniques. This paper compares VMC and CMC techniques with the V2IC control. This control is based on two loops. The fast internal loop has information of the output capacitor current and the error voltage, providing fast dynamic response under load and voltage reference steps, while the slow external voltage loop provides accurate steady state regulation. This paper shows the fast dynamic response of the V2IC control under load and output voltage reference steps and its robustness operating with additional output capacitors added by the customer.

Skew frequency curves in biology and statistics.

"Erratum" slip inserted to face p. 44.