Acción de organizaciones no gubernamentales frente a las semillas genéticamente modificadas en Colombia

Los efectos ambientales, económicos, sociales y culturales generados por las Semillas Genéticamente Modificadas-SGM y su control por empresas transnacionales como Monsanto, han incentivado la acción colectiva liderada por ONGs, tanto internacionalmente como en Colombia. El objetivo principal es analizar cómo la ONG “Semillas” ha incidido en las políticas colombianas relacionadas con la introducción y uso de SGM durante el periodo 2002-2013. Se centra en la Teoría de Redes Transnacionales de Defensa expuesta por M. Keck y K. Sikkink (1998). Además, se analiza el papel de las ONGs ambientales y las corporaciones transnacionales. El argumento central es que al crear vínculos con actores nacionales e internacionales y vincularse con redes y campañas con impacto transnacional, “Semillas” ha posicionado la lucha en contra de las SGM y ha logrado presionar al Estado influyendo parcialmente en sus políticas y leyes, al igual que en su posición y discurso frente al uso de SGM.

Modelación estocástica y trading algorítmico del spread entre acciones mediante procesos de reversión a la media

Las estrategias de inversión pairs trading se basan en desviaciones del precio entre pares de acciones correlacionadas y han sido ampliamente implementadas por fondos de inversión tomando posiciones largas y cortas en las acciones seleccionadas cuando surgen divergencias y obteniendo utilidad cerrando la posición al converger. Se describe un modelo de reversión a la media para analizar la dinámica que sigue el diferencial del precio entre acciones ordinarias y preferenciales de una misma empresa en el mismo mercado. La media de convergencia en el largo plazo es obtenida con un filtro de media móvil, posteriormente, los parámetros del modelo de reversión a la media se estiman mediante un filtro de Kalman bajo una formulación de estado espacio sobre las series históricas. Se realiza un backtesting a la estrategia de pairs trading algorítmico sobre el modelo propuesto indicando potenciales utilidades en mercados financieros que se observan por fuera del equilibrio. Aplicaciones de los resultados podrían mostrar oportunidades para mejorar el rendimiento de portafolios, corregir errores de valoración y sobrellevar mejor periodos de bajos retornos.

Aprovechamiento integral del Cannabis sativa como material de refuerzo/carga del polipropileno

En este trabajo se ha estudiado el potencial tanto los filamentos de cáñamo como de la cañamiza como refuerzo/carga del polipropileno. La modificación de estos materiales se realiza para lograr una mayor compatibilidad con la matriz polimérica. Se evaluaron las propiedades mecánicas de las resistencias a tracción e impacto, de los materiales compuestos reforzados tanto de filamento como de cañamiza. Los filamentos de cáñamo poseen suficiente capacidad de refuerzo en los materiales compuestos basado en polipropileno debido a sus propiedades intrínsecas, siendo una buena alternativa como material de refuerzo. Así, la adición de MAPP (polipropileno modificado con anhídrido maleico) conduce a materiales compuestos con unas resistencias a tracción de hasta el 70% de las que se obtienen con compuestos de PP reforzados con fibra de vidrio. Mientras que la cañamiza ha actuado como una carga en la matriz, incrementado significativamente la rigidez de los materiales compuestos.

Serviceability behaviour of fibre reinforced polymer reinforced concrete beams

El uso de materiales compuestos de matriz polimérica (FRP) emerge como alternativa al hormigón convencionalmente armado con acero debido a la mayor resistencia a la corrosión de dichos materiales. El presente estudio investiga el comportamiento en servicio de vigas de hormigón armadas con barras de FRP mediante un análisis teórico y experimental. Se presentan los resultados experimentales de veintiséis vigas de hormigón armadas con barras de material compuesto de fibra de vidrio (GFRP) y una armada con acero, todas ellas ensayadas a flexión de cuatro puntos. Los resultados experimentales son analizados y comparados con algunos de los modelos de predicción más significativos de flechas y fisuración, observándose, en general, una predicción adecuada del comportamiento experimental hasta cargas de servicio. El análisis de sección fisurada (CSA) estima la carga última con precisión, aunque se registra un incremento de la flecha experimental para cargas superiores a las de servicio. Esta diferencia se atribuye a la influencia de las deformaciones por esfuerzo cortante y se calcula experimentalmente. Se presentan los aspectos principales que influyen en los estados límites de servicio: tensiones de los materiales, ancho máximo de fisura y flecha máxima permitida. Se presenta una metodología para el diseño de dichos elementos bajo las condiciones de servicio. El procedimiento presentado permite optimizar las dimensiones de la sección respecto a metodologías más generales.

Estudo comparativo dos níveis de aptidão física dos alunos dos 11 aos 14 anos com e sem prática de atividades físicas extracurriculares ao longo do ano letivo 2010/2011 : estudo caso

O estudo apresentado tem como objetivo avaliar os níveis de Aptidão Física de crianças e jovens dos 11 aos 14 anos da Freguesia de Bobadela, estabelecendo uma comparação entre aqueles que praticam Atividade Física somente através da Disciplina de Educação Física e os que para além desta realizam Atividades Físicas Extracurriculares. A amostra é constituída por 321 alunos de ambos os géneros, da Escola Básica Integrada de Bobadela, distrito de Lisboa, com idades compreendidas entre os 11 e os 14 anos. Tendo em conta os objetivos do estudo, a amostra foi dividida em dois grupos distintos, sendo que 148 alunos praticam Atividade Física Extracurricular, 81 do género masculino e 67 do género feminino, com uma média de 12,43 anos de idade, e 173 alunos que só praticam Atividade Física durante as aulas de Educação Física, 90 do género masculino e 83 do género feminino, com uma média de idades de 12,31 anos. Para a realização do estudo foi aplicada a bateria de testes do Fitnessgram de modo a avaliar a Aptidão Física das Crianças na dimensão motora (Flexibilidade – senta e alcança; Força Média – abdominal; Resistência – Vaivém e um questionário de prática desportiva fora do contexto escolar). A recolha de dados teve lugar entre 22 de Setembro e 26 de Maio de 2011. A apresentação dos resultados foi efetuada através do uso da estatística descritiva: media, desvio padrão, amplitude; e o teste T-Student. Concluímos que: 1 - No início do ano letivo não existem diferenças estatisticamente significativas entre géneros, em todas as capacidades motoras consideradas; 2- Em termos de evolução da NZSAF para a ZSAF, verifica-se uma melhoria das capacidades motoras em todas as faixas etárias de ambos os grupos, à exceção das raparigas não praticantes no teste da Força Média. A Flexibilidade dos Membros Inferiores foi mais acentuada nas raparigas de 11 anos, não praticantes (3.6%) e praticantes (4.5%). 3 – A percentagem mais elevada de evolução ocorre ao nível da Capacidade Aeróbia (nos rapazes (3.7%) e raparigas (3%) de 12 anos). 4 - Comparando o grupo de Praticantes e de Não Praticantes (rapazes e raparigas) com os valores de referência do Fitnessgram verificou-se que em relação à Aptidão Física, os Praticantes apresentaram maiores percentagens dentro do intervalo da Zona Saudável para todos os testes realizados.

Desenvolvimento da força nas aulas de Educação Física : aplicação de exercícios específicos

Com os avanços da tecnologia as crianças e jovens passam demasiado tempo sem realizar atividade física (Rodrigues, 2000), exceto a que é proporcionada na escola. É nas aulas de Educação Física que se notam as dificuldades sentidas pelos alunos na realização de exercícios devido à sua fraca aptidão física, sendo a força uma das capacidades motoras com maior défice. O presente trabalho pretende analisar as possibilidades de melhorias da força através da realização de exercícios específicos nas aulas de Educação Física. Para tal, realizámos um estudo experimental com dois grupos: GE (grupo experimental), onde foi aplicado um programa de treino de desenvolvimento da força superior e média, durante seis semanas, em três sessões semanais e GC (grupo de controlo) onde não foi aplicado o programa de treino. A amostra foi constituída por trinta e quatro alunos, de ambos os géneros, pertencentes a três turmas do 9º ano de escolaridade, com idades compreendidas entre os catorze e os dezasseis anos, da Escola EB 2,3 António Gedeão em Odivelas. Após a análise estatística (Teste T-Pares) constatámos que existiram melhorias nos dois testes, nos dois géneros, em ambos os grupos, com as seguintes exceções: extensões de braços nas raparigas do GC (decréscimo não significativo); abdominais das raparigas do GC (valor manteve-se); extensões de braços das raparigas no GE (melhoria significativa). Concluímos que a aplicação de alguns exercícios específicos, devidamente integrados no normal funcionamento das aulas, provocou melhorias na força. O estudo sugere a possibilidade de alcançar melhores resultados ao nível da aptidão física mediante a inclusão de exercícios específicos no plano de aulas.

Antimicrobial and mechanical properties of acrylic resins with incorporated silver-zinc zeolite - part I

Objective: The purpose of this in vitro study was to evaluate the antimicrobial activity of acrylic resins containing different percentages of silver and zinc zeolite, and to assess whether the addition of zeolite alters the flexural and impact strength of the resins. Background: The characteristics of acrylic resins support microorganism development that can threaten the health of the dentures user. Material and methods: A microwave-polymerised (Onda-Cryl) and two heat-polymerised (QC20 and Lucitone 550) acrylic resins were used. The materials were handled according to the manufacturers` instructions. Fifty rectangular-shaped specimens (8 x 10 x 4mm) were fabricated from each resin and assigned to 5 groups (n = 10) according to their percentage of Irgaguard B5000 silver-zinc zeolite (0%- control, 2.5%, 5.0%, 7.5% and 10%). Flexural strength and Izod impact strength were evaluated. The antimicrobial activity against two strains of Candida albicans and two strains of Streptococcus mutans was assessed by agar diffusion method. Data were analysed statistically by one-way ANOVA and Tukey`s test at 5% significance level. Results: The addition of 2.5% of Irgaguard B5000 to the materials resulted in antimicrobial activity against all strains. Flexural strength decreased significantly with the addition of 2.5% (QC20 and Lucitone 550) and 5.0% (Onda-Cryl) of Irgaguard B5000. The impact strength decreased significantly with the addition of 2.5% (Lucitone 550) and 5.0% (QC20 and Onda-Cryl) of zeolite. Conclusion: The addition of silver-zinc zeolite to acrylic resins yields antimicrobial activity, but may affect negatively the mechanical properties, depending on the percentage of zeolite.

Intraplate earthquake swarm in Belo Jardim, NE Brazil: reactivation of a major Neoproterozoic shear zone (Pernambuco Lineament)

Intraplate earthquakes in stable continental areas have been explained basically by reactivation of pre-existing zones of weakness, stress concentration, or both. Zones of weakness are usually identified as sites of the last major orogeny, provinces of recent alkaline intrusions, or stretched crust in ancient rifts. However, it is difficult to identify specific zones of weakness and intraplate fault zones are not always easily correlated with known geological features. Although Northeastern Brazil is one of the most seismically active areas in the country (magnitudes 5 roughly every 5 yr), with hypocentral depths shallower than similar to 10 km and seismic zones as long as 30-40 km, no clear relationship with the known surface geology can be usually established with confidence, and a clear identification of zones of weakness has not yet been possible. Here we present the first clear case of seismic activity occurring as reactivation of an old structure in Brazil: the Pernambuco Lineament, a major Neoproterozoic shear zone. The 2004 earthquake swarm of Belo Jardim (magnitudes up to 3.1) and the recurrent activities in the nearby towns of Sao Caetano and Caruaru (magnitudes up to 4.0 and 3.8), show that the Pernambuco Lineament is a weak zone. A local seismic network showed that the Belo Jardim swarm of 2004 November occurred by normal faulting on a North dipping, E-W oriented fault plane in close agreement with the E-W trending structures within the Pernambuco Lineament. The Belo Jardim activity was concentrated in a 1.5 km (E-W) by 2 km (downdip) fault area, and average depth of 4.5 km. The nearby Caruaru activity occurs as both strike-slip and normal faulting, also consistent with local structures of the Pernambuco Lineament. The focal mechanisms of Belo Jardim, Caruaru and S. Caetano, indicate E-W compressional and N-S extensional principal stresses. The NS extension of this stress field is larger than that predicted by numerical models such as those of Coblentz & Richardson and we propose that additional factors such as flexural stresses from the nearby Sergipe-Alagoas marginal basin could also affect the current stress field in the Pernambuco Lineament.

Thermal characterization of dental composites by TG/DTG and DSC

Dental composites can be improved by heat treatment, as a possible way to increase mechanical properties due to additional cure (post-cure). Direct dental composites are essentially similar to the indirect ones, supposing they have the same indication. Therefore, to establish a heat treatment protocol for direct composites, using as indirect (photoactivated by continuous and pulse-delay techniques), a characterization (TG/DTG and DSC) is necessary to determine parameters, such as mass loss by thermal decomposition, heat of reaction and glass transition temperature (T (g)). By the results of this study, a heat treatment could be carried out above 160 A degrees C (above T (g), and even higher than the endset exothermic event) and under 180 A degrees C (temperature of significant initial mass loss).

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber-matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.

Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil

In recent times, increasing attention has been paid to the use of renewable resources particularly of plant origin keeping in view the ecological concerns, renewability and many governments passing laws for the use of such materials. On the other hand, despite abundant availability of lignocellulosic materials in Brazil, very few attempts have been made about their utilization, probably due to lack of sufficient structure/property data. Systematic studies to know their properties and morphology may bridge this gap while leading to value addition to these natural materials. Chemical composition, X-ray powder diffraction, and morphological studies and thermal behavior aspects in respect of banana, sugarcane bagasse sponge gourd fibers of Brazilian origin are presented. Chemical compositions of the three fibers are found to be different than those reported earlier. X-ray diffraction patterns of these three fibers exhibit mainly cellulose type I structure with the crystallinity indices of 39%, 48% and 50% respectively for these fibers. Morphological studies of the fibers revealed different sizes and arrangement of cells. Thermal stability of all the fibers is found to be around 200 degrees C. Decomposition of both cellulose and hemicelluloses in the fibers takes place at 300 degrees C and above, while the degradation of fibers takes place above 400 degrees C. These data may help finding new uses for these fibers. (C) 2009 Elsevier B.V. All rights reserved.

Properties of hemp fibre reinforced concrete composites

This research is concerned with the mechanical and physical properties of hemp fibre reinforced concrete (HFRC). An experimental program was developed based on the statistical method of fractional factors design. The variables for the experimental study were: (1) mixing method; (2) fibre content by weight; (3) aggregate size; and (4) fibre length. Their effects on the compressive and flexural performance of HFRC composites were investigated. The specific gravity and water absorption ratio of HFRC were also studied. The results indicate that the compressive and flexural properties can be modelled using a simple empirical linear expression based on statistical analysis and regression, and that hemp fibre content (by weight) is the critical factor affecting the compressive and flexural properties of HFRC.

Soft-sediment deformation structures in the middle permian Wandrawandian siltstone, southern Sydney basin: implications for depositional environment and basin tectonics

The Middle Permian Wandrawandian Siltstone at Warden Head near Ulladulla in the southern Sydney Basin is dominated by fossiliferous siltstone and mudstone, with a large amount of dropstones (lonestones) and some pebbly sandstone beds. Two general types of deposits are recognised from the cliff succession in view of the timing and mechanism of their formation. One is represented by the background (or primary) deposits of offshore to slope environments with abundant dropstones of glacial marine origin. This facies occurs throughout the cliff sections at Warden Head. The second type is distinguished by secondary, soft-sediment deformational deposits and structures of the primary (background) deposits, and comprises three successive layers of sandy mudstone dikes. In the second type of deposit, metre scale, laterally extensive syn-depositional slump deformation structures occur extensively in the middle part of the Wandrawandian Siltstone. The deformation structures vary in morphology and pattern, including large-scale complex-type folds, flexural stratification, concave-up structures, small-magnitude -faults accompanied by folding and brecciation. The slumps and associated syn-depositional structures are herein attributed to penecontemporaneous deformations of soft sediments (mostly mud and silty mud), formed as a result of mass movement of unconsolidated and/or semi-consolidated substrate following earthquake events. The occurrence of the earthquake event deposits (or seismites) at Warden Head supports the current view that the Sydney Basin was located in a back-arc setting near the New England magmatic arc on an active continental margin during the Middle Permian, and the timing of the earthquake events is here interpreted to indicate the onset of the Hunter Bowen Orogeny in the southern Sydney Basin.

Characterization of melded carbon fibre/epoxy laminates

‘Melding’ is a novel in situ method for joining thermosetting composite structures, without the need of adhesives. Laminate joining is achieved using uncrosslinked resin matrix of the pre-preg. This study used Hexply914C pre-preg material to characterize melded CFRP structures produced using the melding method. A designated area of a laminate was maintained at temperatures below 40 °C retaining uncured (B-staged) material, while the remainder of the laminate was cured at 175 °C. After a 2.5 h cure cycle, the cured region showed a high degree of cure (0.88) and glass transition temperature (176 °C). The uncured area of the same laminate was cured in a second stage, simulating an in situ melded joint. By controlling the temperature and duration of the intermediate dwell and affecting minimum viscosity values prior to final cure, low values of porosity (<0.5%) were achieved. The mechanical properties of the resulting joint were consistent throughout the melded laminate. Flexural strength (1600 MPa), flexural modulus (100–105 MPa) and short beam strength (105–115 MPa) values observed where equivalent or greater than those found in the recommended autoclave cured control specimens. After the entire laminate was post cured, glass transition temperatures of 230 °C (peak tan δ) were observed in all areas of the laminate.

Investigation of processing conditions of melded parts to determine process boundaries

Melding, a novel method for producing seamless joints in thermosetting composites utilising the Quickstep™ process, is explored in this paper. The effect of processing conditions on the quality of melded joins is examined and a set of processing boundaries defined so that the strength of melded joints is optimized. HexPly® 914c pre-preg material was exposed to a range of processing temperatures prior to joining via the melding process. Differential Scanning Calorimetry analysis was carried out to investigate the degree of cure of material prior to final joining, and it was found that minimal cure occurs at temperatures below 120°C. After consolidation and cure of the melded parts, short beam shear testing was conducted to evaluate the strength of the melded interface. Exposure temperatures between 65°C and 120°C were found to optimize short beam shear join strength. Mode I double cantilever beam and mode II end notched flexural tests showed no detrimental effect of elevated exposure temperatures prior to joining.