Impacto geno e citotóxico em populações do caranguejo-uçá, Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ucididae), em manguezais do estado de São Paulo, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cádmio, chumbo, cromo, mercúrio e níquel nos rios do estado de São Paulo e em peixes do Rio Sorocaba (São Paulo, Brasil)

To verify the levels of concentration of some heavy metals in fishes from Sorocaba river (São Paulo, Brazil) and evaluate if this contamination offers health risks to the fishermen, 63 samples of fishes collected from four points along the river were studied for cadmium, lead, chromium, nickel and mercury, with emphasis in this last, since it is the most toxic and most probable as a fish contaminant. Analyzing muscle samples by cold vapor atomic absorption spectrometry it was shown that the fishes are not contaminated. None of the five metals studied were present in prohibitive level and the fishes could be judged secure for human consume. It was also analyzed data from four years of cadmium, lead, chromium, nickel and mercury monitoring made by CETESB, from 1997 to 2000, in water from the main rivers of the State of São Paulo. The study pointed out that the majority of the monitored rivers still present contamination by those metals in a level that requires an improvement of the pollution control actions.

Abordagem metalômica quantitativa de mercúrio em peixes da região amazônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Teores elevados de cobre e níquel em dois solos cultivados com laranja no estado de São Paulo

O cultivo de citrus é uma das principais atividades agrícolas no Estado de São Paulo, sendo realizado em solos gerados a partir de diferentes materiais que conferem, naturalmente, variações na constituição química e mineralógica destes, além de poderem, ou não estar contaminados por metais tóxicos oriundos dos métodos defensivos. Com o objetivo de quantificar os atributos químicos e os teores de metais pesados do solo foi realizado um estudo comparativo entre solos assim cultivados, das regiões das cidades de Mogi Guaçu e São José do Rio Preto. Este estudo envolveu a determinação do pH do solo, análises volumétricas para quantificação dos teores de matéria orgânica, Ca+2, Mg+2 e Al+3 , espectrofotômetro de chama para o estabelecimento dos teores de Na+ e K+ e espectrofotômetro de absorção atômica para determinação dos teores de Cobre, Zinco, Cádmio, Cromo, Níquel e Chumbo. O solo da região de Mogi Guaçu apresentou-se mais ácido devido, provavelmente, a uma maior concentração de Al3+. Apresentou, também, teores mais elevados de matéria orgânica. Os solos de ambas as regiões apresentaramse deficientes em Na+ , K+ , Ca+2 e Mg+2 . A análise realizada para os metais pesados mostrou uma elevada quantidade de Níquel observada nas amostras de solo da região de São José do Rio Preto e, Níquel e Cobre, nas de Mogi Guaçu, com valores classificados como de prevenção, de acordo com os Parâmetros Orientadores da CETESB (2005). Estes teores de alerta devem-se, muito possivelmente, à adição exagerada de defensivos agrícolas.

Separação de Isótopos por Ressonância

Devido a grande demanda do uso da energia atômica, as pesquisas sobre o processo de separação de isótopos tornam-se cada vez mais importantes. Neste trabalho mostramos uma técnica de separação de isótopos usando o efeito da ressonância.

Determination of lead in eye shadow and blush by high-resolution continuum source graphite furnace atomic absorption spectrometry employing directSolid sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Preparação de membranas de acetato de celulose organomodificadas para adsorção de íons C(II), Cd(II), Mn(II) e Ni(II)

Cu(II), Cd(II), Mn(II) AND Ni(II). Cellulose acetate polymeric membranes had been prepared by a procedure of two steps, combining the method of phase inversion and the technique of hydrolysis-deposition. The first step was the preparation of the membrane, and together was organomodified with tetraethylortosilicate and 3-aminopropyltrietoxysilane. Parameters that exert influence in the complexation of the metallic ion, as pH, time of complexation, metal concentration, had been studied in laboratory using tests of metal removal. The membranes had presented resistance mechanics and reactivity to cations, being able to be an alternative for the removal, daily pay-concentration or in the study of the lability of metals complexed.

Caracterização de uma cerâmica 3Y-TZP e avaliação do efeito de tratamentos de superfície na adesão da cerâmica ao glaze ou cimento resinoso

Pós-graduação em Odontologia Restauradora - ICT

Análise química de elementos potencialmente tóxicos em baterias e pilhas por FAAS e ICP OES

Pós-graduação em Ciência dos Materiais - FEIS

Desenvolvimento de revestimentos siloxano-PMMA reforçados por nanotubos de carbono, óxido de grafite e óxido de grafite reduzido para aplicações anticorrosivas

Pós-graduação em Química - IQ

Effect of different bleaching protocols on dental enamel and composite resin

To evaluate changes in microhardness, roughness and surface morphology of dental enamel and composite resin after different tooth bleaching techniques. Material and Methods: Dental fragments from bovine incisors with composite resin restorations were submitted to different bleaching protocols: G1 – daily 8 hours application of a 10% carbamide peroxide (CP) gel during 21 days; G2: 3 applications of 15 minutes of a 38% hydrogen peroxide (H2O2) gel; G3: 38% H2O2 gel associated to irradiation with LED (470nm) during 6 minutes. The Knoop micro hardness of enamel and composite resin were evaluated at 1, 7, 14 and 21 days for G1, and after 1, 2 and 3 sessions for G2 and G3. The roughness and superficial morphology (atomic force microscopy) were evaluated before and at the end of the bleaching treatment. The data were analyzed by Mann-Whitney and Wilcoxon tests (=5%). Results: Significant reduction on enamel hardness was observed after 2 and 3 sessions for G2 and G3. For composite, the reduction occurred after 21 days for G1, and after 3 sessions for G2 and G3 (p<0.05). Significant reduction on roughness and superficial morphology were observed only for enamel of G1 group (p<0.05). Conclusion: The 10% CP gel promoted only superficial alterations on dental enamel, while the 38% H2O2 gel promoted mineral reduction of this dental tissue. All the bleaching protocols promoted reduction on hardness of composite resin.

Efeitos de diferentes sistemas de clareamento dental sobre a rugosidade e morfologia superficial do esmalte e de uma resina composta restauradora

The aim of this study was to evaluate and compare the roughness and superficial morphology of enamel and a composite restorative resin after different bleaching techniques application. Material and Methods: Bovine incisors were selected and standardized cavities were prepared on the buccal surface, which were restored with composite resin. The teeth were distributed according to the following treatments: G1- bleaching with 10% carbamide peroxide (CP); G2 - bleaching with 38% hydrogen peroxide (HP); and G3 - bleaching with 38% of HP associated to light irradiation. For G1, the bleaching gel was applied for 8 hours daily during 21 days. For G2 and G3, 3 sessions were performed, consisting of 3 applications of 15 minutes each, with 7 days of intervals between the sessions. For G3, the LED (470nm) light was used to activate the bleaching agent for 6 minutes. The surface of enamel and composite resin were evaluated before and after the bleaching procedures using a roughness tester and an atomic force microscope. Results: The results showed significant differences in surface roughness of enamel after bleaching only for G1 (Wilcoxon, p<0.05). For composite resin, neither group showed a statistical difference compared to control (Mann-Whitney, p>0.05). Conclusion: It was concluded that the increase in the roughness of enamel occurred only after bleaching therapy using a gel with 10% of CP. The bleaching procedures evaluated in this investigation did not increase the roughness or cause changes in the superficial morphology of the composite resin.

Análise físico-química do MTA e do cimento Portland associado a quatro diferentes radiopacificadores

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)