Indoor position, localizzazione e tracciamento in ambienti chiusi

Le grandi catene di distribuzione, per sviluppare strategie commerciali sempre più efficaci, sono interessate a comprendere il percorso che ogni cliente effettua all’interno del punto vendita, che reparti visita, il tempo di permanenza in un’area specifica ecc… Quindi è stato necessario trovare un sistema per localizzare e tracciare un cliente all’interno di un ambiente chiuso (indoor position). Prima di tutto ci si è concentrati sulla ricerca e sviluppo di una nuova idea che potesse superare gli ostacoli delle soluzioni attualmente in commercio. Si è pensato di sostituire le tessere punti del punto vendita con delle tessere bluetoothLE e di creare un sistema di posizionamento al chiuso utilizzando la stessa logica di funzionamento del GPS per gli ambienti aperti. Il ricevitore è la tessera BLE posseduta dal cliente e i satelliti sono tre device Android dotati di un’app specifica per rilevare il segnale radio (RSSI) emesso dalla tessera ogni secondo. Le rilevazioni dei tre device Android sono successivamente trasferite all’interno di una web application che si occupa di elaborare i dati tramite il processo di trilaterazione. L’output sono le coordinate x,y di ciascuna tessera in ogni secondo di visita all’interno del punto vendita. Questi dati sono infine utilizzati per mostrare graficamente il percorso effettuato dal cliente, l’orario di ingresso e di uscita e il tempo di permanenza. Riepilogando, il progetto comprende una fase di ricerca e intuizione di una nuova idea, una fase di progettazione per traslare i meccanismi del funzionamento GPS all’utilizzo in un ambiente chiuso, una fase di implementazione dell’app e della web application e infine una fase di sperimentazioni sul campo che si concluderà dopo la laurea con test reali in un supermercato della zona.

Periapical surgery and the maxillary sinus: radiographic parameters for clinical outcome

OBJECTIVE: To find out whether conventional periapical radiographs can be used to determine the risk of creating an oroantral communication (OAC) while performing periapical surgery on maxillary premolars and molars. STUDY DESIGN: One hundred thirteen periapical radiographs of maxillary premolars and molars with periapical radiolucencies indicating chronic apical periodontitis were retrospectively analyzed and classified. The surgery reports were evaluated for occurrence of perforation of the maxillary sinus and postoperative complications. RESULTS: Perforation of the sinus membrane (also referred to as the Schneiderian membrane) occurred in 12 cases (9.6%). Exposure of the membrane without rupture occurred in 15 cases (12%). It was found that the distance between the apex or the periapical lesion and the sinus floor did not serve as a predictor of a possible sinus membrane rupture. On the other hand, if the radiograph showed a distinct distance between the lesion and the sinus floor, there was an 82.5% probability that OAC would not occur. Additionally, a blurred radiographic outline of the periapical lesion did not indicate an increased risk of sinus membrane rupture. CONCLUSION: Conventional periapical radiographs cannot be used as predictors for perforation of the maxillary sinus during periapical surgery. However, radiographs with a specific distance between the periapical lesion and the sinus floor point toward a very low risk of accidental sinus perforation during periapical surgery.

Copper and human health: biochemistry, genetics, and strategies for modeling dose-response relationships

Copper (Cu) and its alloys are used extensively in domestic and industrial applications. Cu is also an essential element in mammalian nutrition. Since both copper deficiency and copper excess produce adverse health effects, the dose-response curve is U-shaped, although the precise form has not yet been well characterized. Many animal and human studies were conducted on copper to provide a rich database from which data suitable for modeling the dose-response relationship for copper may be extracted. Possible dose-response modeling strategies are considered in this review, including those based on the benchmark dose and categorical regression. The usefulness of biologically based dose-response modeling techniques in understanding copper toxicity was difficult to assess at this time since the mechanisms underlying copper-induced toxicity have yet to be fully elucidated. A dose-response modeling strategy for copper toxicity was proposed associated with both deficiency and excess. This modeling strategy was applied to multiple studies of copper-induced toxicity, standardized with respect to severity of adverse health outcomes and selected on the basis of criteria reflecting the quality and relevance of individual studies. The use of a comprehensive database on copper-induced toxicity is essential for dose-response modeling since there is insufficient information in any single study to adequately characterize copper dose-response relationships. The dose-response modeling strategy envisioned here is designed to determine whether the existing toxicity data for copper excess or deficiency may be effectively utilized in defining the limits of the homeostatic range in humans and other species. By considering alternative techniques for determining a point of departure and low-dose extrapolation (including categorical regression, the benchmark dose, and identification of observed no-effect levels) this strategy will identify which techniques are most suitable for this purpose. This analysis also serves to identify areas in which additional data are needed to better define the characteristics of dose-response relationships for copper-induced toxicity in relation to excess or deficiency.

Torque expression of 0.018 and 0.022 inch conventional brackets

The aim of this study was to assess the effect of the moments generated with low- and high-torque brackets. Four different bracket prescription-slot combinations of the same bracket type (Mini Diamond® Twin) were evaluated: high-torque 0.018 and 0.022 inch and low-torque 0.018 and 0.022 inch. These brackets were bonded on identical maxillary acrylic resin models with levelled and aligned teeth and each model was mounted on the orthodontic measurement and simulation system (OMSS). Ten specimens of 0.017 × 0.025 inch and ten 0.019 × 0.025 inch stainless steel archwires (ORMCO) were evaluated in the low- and high-torque 0.018 inch and 0.022 inch brackets, respectively. The wires were ligated with elastomerics into the brackets and each measurement was repeated once after religation. Two-way analysis of variance and t-test were conducted to compare the generated moments between wires at low- and high-torque brackets separately. The maximum moment generated by the 0.017 × 0.025 inch stainless steel archwire in the 0.018 inch brackets at +15 degrees ranged from 14.33 and 12.95 Nmm for the high- and low-torque brackets, respectively. The measured torque in the 0.022 inch brackets with the 0.019 × 0.025 inch stainless steel archwire was 9.32 and 6.48 Nmm, respectively. The recorded differences of maximum moments between the high- and low-torque series were statistically significant. High-torque brackets produced higher moments compared with low-torque brackets. Additionally, in both high- and low-torque configurations, the thicker 0.019 × 0.025 inch steel archwire in the 0.022 inch slot system generated lower moments in comparison with the 0.017 × 0.025 inch steel archwire in the 0.018 inch slot system.

Institutional Infrastructure to Support 'Super Growth' in Kenya: Governance Thresholds, Reversion Rates and Economic Development

Kenya Growth Vision 2030 proposes policy and institutional reforms that make it possible for the country to achieve development status of a middle income country by 2030. This paper outlines the institutional framework necessary to achieve ÈSuper Growth,É which describes the character of growth required to meet targets stipulated in the Vision. The paper provides evidence confirming the importance of improving the quality of governance to the achievement of the Vision. The paper also demonstrates that the country is characterized by a high probability of reverting to poor governance. It is argued that, to achieve super growth, the country must attain an institutional tipping point which associates with low reversion rates to weaker institutions. The paper provides suggestions for institutional reforms that result in the achievement of an institutional tipping point and super growth.

Chemistry of orthopyroxenes, clinopyroxenes, and spinels of ODP Hole 103-637A peridotites

Mineral compositions of the plagioclase-bearing ultramafic tectonites dredged and cored seaward of the continental slope of the Galicia margin (Leg 103, Site 637) were compared to mineral compositions from onshore low-pressure ultramafic bodies (southeastern Ronda, western Pyrenees, and Lizard Point), on the basis of standardized (30-s counting time) probe analyses. The comparison was extended to some plagioclase-free harzburgites related to ophiolites (Santa Elena in Costa Rica, north Oman, and the Humboldt body in New Caledonia) on the basis of new analytical data and data from the literature. The behavior of Cr, Na, Al, Mg, Fe, Ni, and Ti in olivine, pyroxenes, and spinel was examined in order to distinguish between the effects of partial melting and mineral facies change, from the spinel to plagioclase stability fields. The peridotite from the Galicia margin appears slightly depleted in major incompatible elements and experienced a minor partial melting. However, it experienced large scale but heterogeneous recrystallization in the plagioclase field. These features are very similar to those observed in Ronda, whereas in the western Pyrenees the minerals exemplify a very minor partial-melting event (or none at all) and have retained compositions corresponding to those of the relatively high-pressure Seiland sub facies. The minerals from the Lizard Point peridotite have characteristics (low Mg/(Mg + Fe) ratio; high Cr/(Cr + Al) ratio in spinel) more related to cumulate from a differentiated tholeiitic melt than related to ophiolitic tectonite. Diffusion profiles of Al and Cr across pyroxenes and spinel show that recrystallization features occurred at different speeds or temperatures in the different bodies. The pyroxenes from Ronda would have experienced recrystallization about 14 times faster than the peridotite from the Galicia margin. The western Pyrenean lherzolites also experienced rapid recrystallization; nevertheless, because they are of a different mineral facies, the data are not directly comparable to that from Ronda and Galicia. The harzburgite at Santa Elena as well as a xenolith from alkali basalt exemplify rapid cooling characterized by very weak re-equilibration. Recrystallization speed is related to emplacement speed in the present geological environment. The slow-rising Galicia margin peridotite was emplaced by thinning of the lithospheric subcontinental mantle near an incipient mid-oceanic ridge. The fast-rising peridotites from Ronda and the western Pyrenees were hot diapirs emplaced from the asthenosphere along transcurrent faults, possibly related to the opening of the Atlantic Ocean.

Sedimentaology, pollen profile, and climate reconstruction on a sediment core from Trou Lake, Yukon, Canada

Beringian climate and environmental history are poorly characterized at its easternmost edge. Lake sediments from the northern Yukon Territory have recorded sedimentation, vegetation, summer temperature and precipitation changes since ~16 cal ka BP. Herb-dominated tundra persisted until ~14.7 cal ka BP with mean July air temperatures less than or equal to 5 °C colder and annual precipitation 50 to 120 mm lower than today. Temperatures rapidly increased during the Bølling/Allerød interstadial towards modern conditions, favoring establishment of Betula-Salix shrub tundra. Pollen-inferred temperature reconstructions recorded a pronounced Younger Dryas stadial in east Beringia with a temperature drop of ~1.5 °C (~2.5 to 3.0 °C below modern conditions) and low net precipitation (90 to 170 mm) but show little evidence of an early Holocene thermal maximum in the pollen record. Sustained low net precipitation and increased evaporation during early Holocene warming suggest a moisture-limited spread of vegetation and an obscured summer temperature maximum. Northern Yukon Holocene moisture availability increased in response to a retreating Laurentide Ice Sheet, postglacial sea level rise, and decreasing summer insolation that in turn led to establishment of Alnus-Betula shrub tundra from ~5 cal ka BP until present, and conversion of a continental climate into a coastal-maritime climate near the Beaufort Sea.

Dinámica vegetal desde el tardiglaciar en la cuenca del Duero: interacciones con clima, fuego e impacto humano

La cuenca del Duero constituye un vasto territorio ibérico cuyo paisaje se encuentra actualmente muy alterado por la mano del hombre y es prácticamente imposible localizar alguna manifestación de su cubierta vegetal natural. Aunque la historia de la vegetación en los sectores central y oriental es relativamente bien conocida, en su mitad occidental los registros paleoecológicos estudiados hasta la fecha son prácticamente inexistentes. Esto hace que se desconozca la respuesta de la vegetación a las diferentes oscilaciones climáticas que se han producido desde el Último Máximo Glaciar, cuál fue el impacto de las diferentes culturas sobre el medio, cuándo se produjo una alteración profunda de la vegetación natural y cuál ha sido la historia de los incendios. Este último aspecto, el papel e importancia de los incendios, reviste un especial interés en la península Ibérica dada su situación geográfica y climática dentro de la cuenca Mediterránea, donde el fuego es un factor ecológico de primer nivel. Las distintas técnicas paleoecológicas son las más adecuadas para abordar todas estas preguntas. De este modo, los avatares de la vegetación a través del tiempo se han reconstruido mediante el análisis polínico y de macrofósiles, el impacto humano se ha trazado utilizando indicadores polínicos ligados a actividades antrópicas y esporas de hongos coprófilos, estudiándose los incendios a partir del registro de partículas microscópicas de carbón. La alta resolución temporal y taxonómica alcanzada en estos análisis, así como la amplia superficie abarcada con los yacimientos estudiados, hacen que la información obtenida sea altamente detallada y complete el conocimiento que se tiene sobre la cuenca del Duero. El Tardiglaciar se registra por primera vez en la Meseta Norte Ibérica en la secuencia de Ayoó de Vidriales, donde una vegetación esteparia prácticamente desarbolada domina durante los periodos fríos. Durante el interestadial Bølling/Allerød la expansión forestal (pinos, abedules) fue muy leve y tardía y fue interrumpida bruscamente por el Dryas Reciente. Al final del Dryas Reciente o al inicio del Holoceno se produjo una acusada y rápida expansión de los bosques. Esta dinámica sugiere que no hubo refugios glaciares importantes en esta zona de la Meseta durante el “Mystery Interval”, aparentemente el periodo más frío y seco. Los incendios fueron muy escasos, aumentando de forma muy brusca al inicio del Holoceno por el aumento de biomasa y las condiciones relativamente cálidas y secas. A partir de los registros de Ayoó y El Maíllo se consolida la importancia del gradiente oceanicidad-continentalidad en el Sistema Central y la Meseta Norte, que se manifiesta principalmente en la dominancia más prolongada de los pinares hacia el interior. Además, otra de las principales contribuciones de la presente tesis es proporcionar evidencia sobre la sucesión de distintos tipos de bosques en el noroeste de la Meseta, precisando el marco temporal en el que suceden. Así, se ha constatado que hubo un máximo desarrollo del bosque caducifolio durante el Holoceno medio en Ayoó de Vidriales y una baja incidencia del fuego que sugieren que el clima fue más húmedo que en el Holoceno inicial. El estudio de macrofósiles leñosos ha permitido detectar procesos que con el análisis polínico habrían pasado desapercibidos, como la persistencia hasta el Holoceno final de Pinus sylvestris en la sierra del Teleno y la sustitución de P. sylvestris por P. pinaster en la sierra de Francia durante el Holoceno inicial. También el estudio de los carbones procedentes de los arenales de Tierra de Pinares han proporcionado la prueba definitiva de la naturalidad de los pinares de P. pinaster. El impacto humano se detecta temprano en las secuencias del oeste de la cuenca del Duero, durante el Neolítico, aunque ha sido mucho más acusado desde la Edad del Hierro (ca 2700-2500 años cal BP). Para la detección del impacto humano temprano ha sido clave el análisis de esporas de hongos coprófilos, cuyo análisis fue incorporado en la secuencia de Ayoó de Vidriales. Una de sus principales consecuencias fue el establecimiento de comunidades de matorral (brezales, piornales) sobre amplias extensiones del occidente de la cuenca del Duero, vinculado al recrudecimiento de los regímenes de incendios. A pesar de que los incendios han sido ecológicamente importantes desde el inicio del Holoceno, los cambios introducidos por el hombre en sus regímenes sobrepasaron la resiliencia de los bosques originales, lo cual condujo a su sustitución sostenida por matorrales. ABSTRACT The Duero Basin constitutes a vast Iberian territory which is currently strongly disturbed due to human activities, so it is very difficult to find any remnant of the natural vegetation. Vegetation history for the eastern and western sectors of the Basin is relatively well-known but, in contrast, there is an almost complete lack of palaeoecological record in the western area. Consequently, there exists a profound ignorance about vegetation responses to the climatic oscillations occurred since the Last Glacial Maximum, the environmental impact of the different cultures, when a severe disturbance of the natural vegetation took place and fire history. The last question, the role and importance of fire, has a special interest in the Iberian Peninsula due to its geographic and climatic framework, the Mediterranean Basin, where fire is a major ecological factor. The diverse palaeoecological techmiques are the most suitable tools to address all these questions. Thus, vegetation shifts through time have been reconstructed using pollen and macrofossil analyses, human impact has been tracked by means of anthropogenic pollen indicators and dung fungal spores, while fire history has been studied from the quantification of microscopic charcoal particles. The high taxonomic and time resolution attained along with the extensive surface covered by the studied sites provide detailed information very useful to complete the knowledge on landscape dynamics in the Duero Basin. The Lateglacial is recorded for the first time in the Northern Iberian Plateau in the sequence from Ayoó de Vidriales, showing that almost treeless steppic vegetation dominated during the cold periods. Tree expansion (pines, birches) was late and slight during the Bølling/Allerød interstadial and was sharply interrupted by the Younger Dryas (YD) climatic reversal. By the end of the YD or the onset of the Holocene, a rapid forest expansion occurred. This forest dynamics suggests an absence of important glacial refugia for trees in this area of the Plateau during the Mystery Interval, apparently the coldest and driest period. Fires were fairly rare, increasing abruptly at the beginning of the Holocene due to the relatively warm and dry climate and the accumulation of biomass. The records from Ayoó and El Maíllo reinforce the role of the oceanicity-continentality gradient in the vegetation history of the Iberian Central Range and the Iberian Northern Plateau, reflected mainly in the longer dominance of pine forests towards inland areas. Further, another important contribution of this PhD Thesis is providing evidence on the succession of different forest types in the northestern fringe of the Plateau, specifying the chronological framework. A maximum of deciduous forest development and low fire activity have been detected in Ayoó de Vidriales during the mid-Holocene, suggesting that climate was wetter than in the early Holocene. The study of woody macrofossils has allowed detecting processes which would have remained unnoticed using pollen analysis alone, such as the persistence of Pinus sylvestris until the late Holocene in the Teleno Mountains and the early Holocene replacement of P. sylvestris with P. pinaster in the sierra de Francia range. The study of macroscopic charcoal fragments from palaeosols of the Tierra de Pinares has also provided the definitive proof of naturalness for the P. pinaster stands gorwing over this area at present. Early human impact, during the Neolithic, has been detected in the sequences from the western sector of the Duero Basin, although human disturbance has been more severe from the Iron Age onwards (ca 2700-2500 cal yr BP). The analysis of coprophilous fungi incorporated in the sequence of Ayoó de Vidriales has played a key role in recognizing that early human impact. One of the main consequences of human disturbance was the establishment of shrubland communities (heaths, brooms) over huge areas of the western Duero Basin, linked to severe and/or frequent fires. Despite fires has been ecologically important since the onset of the Holocene, human-induced changes in fire regimes have exceeded the resilience of original forests leading to a sustained replacement with shrublands.

Multiscale modeling of the plastic behaviour in single crystal tungsten: from atomistic to crystal plasticity simulations

En una planta de fusión, los materiales en contacto con el plasma así como los materiales de primera pared experimentan condiciones particularmente hostiles al estar expuestos a altos flujos de partículas, neutrones y grandes cargas térmicas. Como consecuencia de estas diferentes y complejas condiciones de trabajo, el estudio, desarrollo y diseño de estos materiales es uno de los más importantes retos que ha surgido en los últimos años para la comunidad científica en el campo de los materiales y la energía. Debido a su baja tasa de erosión, alta resistencia al sputtering, alta conductividad térmica, muy alto punto de fusión y baja retención de tritio, el tungsteno (wolframio) es un importante candidato como material de primera pared y como posible material estructural avanzado en fusión por confinamiento magnético e inercial. Sin embargo, el tiempo de vida del tungsteno viene controlado por diversos factores como son su respuesta termo-mecánica en la superficie, la posibilidad de fusión y el fallo por acumulación de helio. Es por ello que el tiempo de vida limitado por la respuesta mecánica del tungsteno (W), y en particular su fragilidad, sean dos importantes aspectos que tienes que ser investigados. El comportamiento plástico en materiales refractarios con estructura cristalina cúbica centrada en las caras (bcc) como el tungsteno está gobernado por las dislocaciones de tipo tornillo a escala atómica y por conjuntos e interacciones de dislocaciones a escalas más grandes. El modelado de este complejo comportamiento requiere la aplicación de métodos capaces de resolver de forma rigurosa cada una de las escalas. El trabajo que se presenta en esta tesis propone un modelado multiescala que es capaz de dar respuestas ingenieriles a las solicitudes técnicas del tungsteno, y que a su vez está apoyado por la rigurosa física subyacente a extensas simulaciones atomísticas. En primer lugar, las propiedades estáticas y dinámicas de las dislocaciones de tipo tornillo en cinco potenciales interatómicos de tungsteno son comparadas, determinando cuáles de ellos garantizan una mayor fidelidad física y eficiencia computacional. Las grandes tasas de deformación asociadas a las técnicas de dinámica molecular hacen que las funciones de movilidad de las dislocaciones obtenidas no puedan ser utilizadas en los siguientes pasos del modelado multiescala. En este trabajo, proponemos dos métodos alternativos para obtener las funciones de movilidad de las dislocaciones: un modelo Monte Cario cinético y expresiones analíticas. El conjunto de parámetros necesarios para formular el modelo de Monte Cario cinético y la ley de movilidad analítica son calculados atomísticamente. Estos parámetros incluyen, pero no se limitan a: la determinación de las entalpias y energías de formación de las parejas de escalones que forman las dislocaciones, la parametrización de los efectos de no Schmid característicos en materiales bcc,etc. Conociendo la ley de movilidad de las dislocaciones en función del esfuerzo aplicado y la temperatura, se introduce esta relación como ecuación de flujo dentro de un modelo de plasticidad cristalina. La predicción del modelo sobre la dependencia del límite de fluencia con la temperatura es validada experimentalmente con ensayos uniaxiales en tungsteno monocristalino. A continuación, se calcula el límite de fluencia al aplicar ensayos uniaxiales de tensión para un conjunto de orientaciones cristalográticas dentro del triángulo estándar variando la tasa de deformación y la temperatura de los ensayos. Finalmente, y con el objetivo de ser capaces de predecir una respuesta más dúctil del tungsteno para una variedad de estados de carga, se realizan ensayos biaxiales de tensión sobre algunas de las orientaciones cristalográficas ya estudiadas en función de la temperatura.-------------------------------------------------------------------------ABSTRACT ----------------------------------------------------------Tungsten and tungsten alloys are being considered as leading candidates for structural and functional materials in future fusion energy devices. The most attractive properties of tungsten for the design of magnetic and inertial fusion energy reactors are its high melting point, high thermal conductivity, low sputtering yield and low longterm disposal radioactive footprint. However, tungsten also presents a very low fracture toughness, mostly associated with inter-granular failure and bulk plasticity, that limits its applications. As a result of these various and complex conditions of work, the study, development and design of these materials is one of the most important challenges that have emerged in recent years to the scientific community in the field of materials for energy applications. The plastic behavior of body-centered cubic (bcc) refractory metals like tungsten is governed by the kink-pair mediated thermally activated motion of h¿ (\1 11)i screw dislocations on the atomistic scale and by ensembles and interactions of dislocations at larger scales. Modeling this complex behavior requires the application of methods capable of resolving rigorously each relevant scale. The work presented in this thesis proposes a multiscale model approach that gives engineering-level responses to the technical specifications required for the use of tungsten in fusion energy reactors, and it is also supported by the rigorous underlying physics of extensive atomistic simulations. First, the static and dynamic properties of screw dislocations in five interatomic potentials for tungsten are compared, determining which of these ensure greater physical fidelity and computational efficiency. The large strain rates associated with molecular dynamics techniques make the dislocation mobility functions obtained not suitable to be used in the next steps of the multiscale model. Therefore, it is necessary to employ mobility laws obtained from a different method. In this work, we suggest two alternative methods to get the dislocation mobility functions: a kinetic Monte Carlo model and analytical expressions. The set of parameters needed to formulate the kinetic Monte Carlo model and the analytical mobility law are calculated atomistically. These parameters include, but are not limited to: enthalpy and energy barriers of kink-pairs as a function of the stress, width of the kink-pairs, non-Schmid effects ( both twinning-antitwinning asymmetry and non-glide stresses), etc. The function relating dislocation velocity with applied stress and temperature is used as the main source of constitutive information into a dislocation-based crystal plasticity framework. We validate the dependence of the yield strength with the temperature predicted by the model against existing experimental data of tensile tests in singlecrystal tungsten, with excellent agreement between the simulations and the measured data. We then extend the model to a number of crystallographic orientations uniformly distributed in the standard triangle and study the effects of temperature and strain rate. Finally, we perform biaxial tensile tests and provide the yield surface as a function of the temperature for some of the crystallographic orientations explored in the uniaxial tensile tests.

Characterization of oxide layers grown on D9 austenitic stainless steel in lead bismuth eutectic

Lead bismuth eutectic (LBE) is a possible coolant for fast reactors and targets in spallation neutron sources. Its low melting point, high evaporation point, good thermal conductivity, low reactivity, and good neutron yield make it a safe and high performance coolant in radiation environments. The disadvantage is that it is a corrosive medium for most steels and container materials. This study was performed to evaluate the corrosion behavior of the austenitic stainless steel D9 in oxygen controlled LBE. In order to predict the corrosion behavior of steel in this environment detailed analyses have to be performed on the oxide layers formed on these materials and various other relevant materials upon exposure to LBE. In this study the corrosion/oxidation of D9 stainless steel in LBE was investigated in great detail. The oxide layers formed were characterized using atomic force microscopy, magnetic force microscopy, nanoindentation, and scanning electron microscopy with wavelength-dispersive spectroscopy (WDS) to understand the corrosion and oxidation mechanisms of D9 stainless steel in contact with the LBE. What was previously believed to be a simple double oxide layer was identified here to consist of at least 4 different oxide layers. It was found that the inner most oxide layer takes over the grain structure of what used to be the bulk steel material while the outer oxide layer consists of freshly grown oxides with a columnar structure. These results lead to a descriptive model of how these oxide layers grow on this steel under the harsh environments encountered in these applications.

Reducing inconsistencies in point observations of maximum flood inundation level

Flood simulation models and hazard maps are only as good as the underlying data against which they are calibrated and tested. However, extreme flood events are by definition rare, so the observational data of flood inundation extent are limited in both quality and quantity. The relative importance of these observational uncertainties has increased now that computing power and accurate lidar scans make it possible to run high-resolution 2D models to simulate floods in urban areas. However, the value of these simulations is limited by the uncertainty in the true extent of the flood. This paper addresses that challenge by analyzing a point dataset of maximum water extent from a flood event on the River Eden at Carlisle, United Kingdom, in January 2005. The observation dataset is based on a collection of wrack and water marks from two postevent surveys. A smoothing algorithm for identifying, quantifying, and reducing localized inconsistencies in the dataset is proposed and evaluated showing positive results. The proposed smoothing algorithm can be applied in order to improve flood inundation modeling assessment and the determination of risk zones on the floodplain.

Controlador de demanda e fator de potência de baixo custo para unidades consumidoras de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influências de famílias wavelets e suas ordens no desempenho de um localizador de faltas em linhas aéreas de transmissão de energia elétrica

Essa dissertação tem por objetivo analisar a influência de famílias wavelets e suas ordens no desempenho de um algoritmo de localização de faltas a partir das ondas viajantes de dois terminais de uma linha de transmissão aérea. Tornou-se objetivo secundário a modelagem de um sistema elétrico de potência (SEP) para obtenção de um universo de faltas que validassem o localizador. Para isso, parte de um SEP da Eletrobrás-Eletronorte em 500/230 kV foi modelado no Alternative Transient Program (ATP) utilizando-se parâmetros reais. A Transformada Wavelet, via análise multiresolução (AMR), é empregada valendo-se de sua característica de localização temporal, permitindo caracterizações precisas de instantes de transitórios eletromagnéticos ocasionados por faltas, as quais geram ondas que ao se propagarem em direção aos terminais da linha contêm os tempos de propagação destas do local do defeito a tais terminais e podem ser convenientemente extraídos por tal transformada. Pela metodologia adotada no algoritmo, a diferença entre esses tempos determina com boa exatidão o local de ocorrência da falta sobre a linha. Entretanto, um dos agentes variantes do erro nessa estimação é a escolha da Wavelet usada na AMR dos sinais, sendo, portanto, a avaliação dessa escolha sobre o erro, objetivo principal do trabalho, justificada pela ainda inexistente fundamentação científica que garanta a escolha de uma wavelet ótima a uma certa aplicação. Dentre um leque de Wavelets discretas, obtiveram-se resultados adequados para 16 delas, havendo erros máximos inferiores aos 250 metros estipulados para a precisão. Duas Wavelets, a Db15 e a Sym17, sobressaíram-se ao errarem, respectivamente, 3,5 e 1,1 vezes menos que as demais. A metodologia empregada consta da: exportação dos dados das faltas do ATP para o MATLAB®; aplicação da transformação modal de Clarke; decomposição dos modos alfa e síntese dos níveis 1 de detalhes via AMR; cálculo de suas máximas magnitudes e determinação dos índices temporais; e por fim, a teoria das ondas viajantes equaciona e estima o local do defeito sobre a LT, sendo tudo isso programado no MATLAB e os erros de localização analisados estatisticamente no Microsoft Excell®. Ao final elaborou-se ainda uma GUI (Guide User Interface) para a Interface Homem-Máquina (IHM) do localizador, servindo também para análises gráficas de qualquer das contingências aplicadas ao SEP. Os resultados alcançados demonstram uma otimização de performance em razão da escolha da wavelet mais adequada ao algoritmo e norteiam para uma aplicação prática do localizador.

Modelli di scambio termico in pozzo sulla base della caratterizzazione geotermica di un reservoir a bassa entalpia: studio di sensitività sulla efficienza dei sistemi di condizionamento a pompa di calore

Tra i temi di attualità, quello del risparmio energetico è tra i più dibattuti negli ultimi anni; tale tema è strettamente correlato al problema del riscaldamento globale, infatti, mentre sul prossimo esaurimento delle risorse energetiche tradizionali non vi sono ancora certezze assolute, per quanto riguarda l’azione nociva dei gas serra, la Comunità Scientifica Internazionale si ritrova d’accordo su una netta presa di posizione contro l’emissione di tali sostanze, provocata in larga parte dall’utilizzo dei combustibili fossili. In questo contesto, l’Unione Europea sta promuovendo la diffusione di tecnologie che non prevedano l’utilizzo di gas, petrolio o carbone, soprattutto per il settore dell’edilizia, ove una corretta progettazione e l’utilizzo di tecnologie non convenzionali può portare alla riduzione anche dell’80% dei consumi, con conseguente abbattimento delle emissioni. Tra questi interventi innovativi, il più comune e conosciuto è sicuramente quello del solare termico e fotovoltaico; ma ne esistono anche di altri, ancora non molto pubblicizzati in Italia, ma ampiamente conosciuti e utilizzati in altri paesi dell’Unione. Tra questi, vi è il sistema di riscaldamento analizzato in questa tesi: la pompa di calore geotermica. Tale sistema, come verrà spiegato nell’elaborato di laurea, ha indubbi vantaggi economici, energetici ed ambientali, a fronte di una non trascurabile spesa iniziale. Attualmente, nel Nord Italia, si incominciano a vedere impianti di questo tipo, sulla scia del successo riscontrato nei paesi confinanti (in particolare Austria e Svizzera). La progettazione si basa attualmente su modelli statici, sviluppati dall’Università Svizzera del Canton Ticino, per l’utilizzo della pompa di calore nel territorio alpino. Obiettivo della tesi, è la verifica di tali modelli, di cui si è venuto a conoscenza grazie alla collaborazione con l’Università SUPSI, sulle condizioni idrogeologiche della Pianura Padana, soffermandosi su alcuni parametri fondamentali della progettazione di una pompa di calore geotermica, quali la conduttività e la capacità termica volumetrica dei terreni incontrati, la presenza di falde, ed i parametri geometrici del pozzo, al fine di dare una valutazione tecnica ed economica dell’impianto. Tali analisi è stata infatti fino ad ora affrontata in maniera sommaria dai perforatori, che eseguono generalmente sempre lo stesso modello di pozzo geotermico, sulla base degli esempi consolidati di Svizzera e Germania. Alcune misure di temperatura in situ sono state rilevate in collaborazione con la società Geotermia SRL di Mantova, ditta specializzata nella perforazione di pozzi geotermici (tale esperienza è parte centrale dell’estratto “Laboratorio di Tesi Ls”), mentre la parte modellistica della tesi è stata sviluppata in collaborazione con lo studio di progettazione Studio Seta SRL di Faenza, il cui stabile è climatizzato in parte con una pompa di calore geotermica.

Partial discharge in power distribution electrical systems: pulse propagation models and detection optimization

Investigation on impulsive signals, originated from Partial Discharge (PD) phenomena, represents an effective tool for preventing electric failures in High Voltage (HV) and Medium Voltage (MV) systems. The determination of both sensors and instruments bandwidths is the key to achieve meaningful measurements, that is to say, obtaining the maximum Signal-To-Noise Ratio (SNR). The optimum bandwidth depends on the characteristics of the system under test, which can be often represented as a transmission line characterized by signal attenuation and dispersion phenomena. It is therefore necessary to develop both models and techniques which can characterize accurately the PD propagation mechanisms in each system and work out the frequency characteristics of the PD pulses at detection point, in order to design proper sensors able to carry out PD measurement on-line with maximum SNR. Analytical models will be devised in order to predict PD propagation in MV apparatuses. Furthermore, simulation tools will be used where complex geometries make analytical models to be unfeasible. In particular, PD propagation in MV cables, transformers and switchgears will be investigated, taking into account both irradiated and conducted signals associated to PD events, in order to design proper sensors.