Elemental and isotopic zoning in natural alpine quartz

THESIS ABSTRACT : Stable isotope geochemistry is used to help resolve a large number of geological questions. In order to do this, it is essential to understand the different mechanisms that govern isotopic fractionation processes between different phases and to identify the conditions required to reach equilibrium fractionation. However, at low temperatures, these processes are poorly constrained and many factors can induce differential partitioning of the isotopes between sectors of a mineral species and the fluid during mineral growth. This can result in so-called 'sector zoning' of a mineral species. The aim of this thesis is to evaluate the occurrence of sector zoning of the oxygen isotopes and trace elements in natural α-quartz crystals and to identify the reasons for such zoning. The implications for the fluid-mineral interactions are studied in the context of the Alpine metamorphism. The approach chosen has focused on examining the crystal structure, cathodoluminescence appearance (CL), and on relating elemental (e.g. Li, Na, Al, P, K, Ca, Ge, Ti, Fe) to stable oxygen isotope compositions between and along different growth sectors. Low temperature quartz samples were selected from Alpine veins in different localities, where growth conditions have already been well constrained. The mineralogy as well as the isotopic compositions of the host rocks were also investigated, in order to interpret the variations obtained between the different growth stages in the framework of fluid-rock interaction during Alpine metamorphism. Depending on the growth conditions, most of the studied quartz is strongly zoned in CL, and it reveals corresponding zonations in the trace element content (e.g. growth zoning). Aluminium, substituting for Si in the lattice, was found in concentrations up to 1000's ppma, and its distribution is strongly related to Li and H and to a lesser extent, to Ge. Elemental sector zoning is evident from the distribution of these three elements since they exhibit differences in their respective concentrations between faces for distinct growth zones, with prismatic faces having the lowest Al contents. Quartz from veins in magmatic rocks, for example, tend to have lower Al concentrations and similar concentrations of Li and Ti suggesting also a contribution of these elements from the host rock. The relationship between Al and Li is still correlated. Only Alpine crystals grown at higher temperatures (~400°C) without any CL zoning feature are free of these impurities and do not show such zoning characteristics. Differences in the δ18O values were measured between different faces principally in the AIenriched growth zones or stages. These results were confirmed by the means of two different methods (in situ/non in situ). However, it was determined that the Al concentrations do not affect significantly oxygen isotope fractionations at 300°C. The results altogether suggest that the presence of sector zoning in quartz crystals is real, but not universal, and henceforth should be taken into consideration for any use of these systems. The occurrence of disequilibrium partitioning has been enhanced and is possibly related to kinetic processes as well as structural effects that do not affect similarly trace element incorporation and isotopic fractionation. In situ measurements also revealed fine scale δ18O zonations along growth paths that are useful to constrain fluid-rock interactions during Alpine metamorphism. Variations in the δ18O values present along growth vectors indicate changes in the fluid composition and origin. Association with oxygen isotope composition of the host rock allows for the deduction of interactions between rocks, veins and consequently fluids, as well as fluid regimes. RESUME DE LA THESE : A basses températures, (i.e. <400°C) les différents mécanismes qui régissent le fractionnement isotopique ainsi que les conditions nécessaires pour établir un état d'équilibre sont peu connus et nombre de paramètres peuvent entraîner un partitionnement chimique différentiel entre différents secteurs d'un minéral et le fluide en contact. Ainsi, ce travail de thèse a pour but d'évaluer la possible présence de zonages sectoriels en isotopes de l'oxygène mais aussi en éléments traces dans des cristaux naturels de quartz-α de basses températures, ainsi que les raisons d'un tel phénomène et enfin ses implications sur les interactions fluide-roche, principalement dans le cadre du métamorphisme Alpin. La structure et l'apparence en cathodoluminescence (CL) des échantillons ont été caractérisées avant de retracer en détail les compositions en élément traces (Li, Na, Al, P, K, Ca, Ge, Ti, Fe) et en isotopes de l'oxygène, le long et entre différents secteurs. Les échantillons de quartz sélectionnés proviennent majoritairement de veines Alpine de différentes localités, où les conditions de croissance ont été déjà bien caractérisées. Les compositions minéralogiques et isotopiques de la roche encaissante ont aussi été examinées, pour contraindre les variations obtenues dans un contexte Alpin. Selon leurs conditions de croissance, la plupart des cristaux étudiés sont fortement zonés, ce qui est souligné par un zonage des concentrations en éléments traces (e.g. zonage de croissance). L'Aluminium, qui peut se substituer à la Silice dans le réseau cristallin, a été retrouvé jusqu'en très grandes concentrations dans certaines zones (plusieurs milliers de ppma). De plus, la distribution en Al est fortement liée à celles de Li et H, ainsi que dans une moindre mesure à Ge. La présence de zonage sectoriel est évidente au niveau de ces éléments qui montrent de larges différences de concentrations entre différentes faces pour une même zone de croissance, avec les concentrations les plus basses retrouvées dans les faces prismatiques. Les quartz de veines situées dans des roches magmatiques par exemple possèdent des concentrations en Li et Ti de même ordre de grandeur, confirmant le rôle de la composition de la roche encaissante. La relation Li/Al est toujours fortement présente, mais ce rapport est fonction de la face mesurée. Seuls les cristaux Alpins de plus hautes températures (400°C) ne possédant pas de zones en CL ne présentent aucune de ces caractéristiques. Des différences dans les valeurs de δ18O de zones identiques enrichies en Al ont clairement été mesurées entre les différentes faces r, z, et m, mais aussi au sein d'une même seule zone, indiquant que le fractionnement a probablement eu lieu en déséquilibre. Il a été déterminé que la présence d'Al dans ces teneurs n'avait qu'un faible effet sur le fractionnement isotopique de l'oxygène. L'utilisation de deux méthodes différentes a permis d'obtenir des résultats in situ et non in situ concordants. La comparaison des résultats obtenus permet de démontrer que le zonage sectoriel est bien présent dans certains cristaux de quartz, et dépend des conditions de formation. La présence d'un partitionnement différentiel des éléments traces peut être due à des effets cinétiques aussi bien que structuraux, alors que le zonage sectoriel des isotopes de l'oxygène aurait d'autres origines. Il est alors évident que la possibilité de zonage sectoriel doit être désormais pris en considération avant toute interprétations de données isotopiques de cristaux zonés. Les mesures in situ ont de plus permis de distinguer de fines variations des valeurs δ18O au cours de la croissance, qui peuvent aider à retracer la circulations des fluides dans les Alpes durant cette période. En association avec les compositions des roches encaissantes, ii est possible de déduire les interactions entre roches, veines, et par conséquent fluides, au cours de différentes étapes. RESUME GRAND PUBLIC : La géochimie des isotopes stables a pris beaucoup d'importance depuis ces dernières années pour aider à résoudre nombre de questions géologiques, en se basant sur les caractéristiques du fractionnement isotopiques pour différents systèmes. Il est donc nécessaire d'avoir une connaissance approfondie des mécanismes qui s'appliquent au fractionnement isotopique entre les minéraux et les fluides à partir desquels ils se forment. Ces mécanismes ont été bien approchés par différents types de calibrations pour des systèmes à hautes températures, cependant cela n'est pas aussi évident pour les systèmes à des températures inférieures à 400-500°C. Ce travail de thèse a pour but d'aider à la description et la compréhension des phénomènes qui peuvent affecter le fractionnement isotopique à basses températures, ainsi que leurs implications, à partir de l'étude de cristaux de quartz. Le choix des échantillons s'est porté sur des cristaux naturels formés à des températures inférieures ou égales à 400°C, provenant majoritairement de fissures hydrothermales Alpines dont les conditions de formation ont déjà été déterminées. L'étude des cristaux Alpin permet de plus de replacer les résultats obtenus dans le contexte du métamorphisme Alpin au cours du Miocène (21-13 Ma). Après examen de la structure et de la morphologie des cristaux, et leur caractérisation par cathodoluminescence (CL), des analyses chimiques détaillées sur les éléments en traces pouvant entrer dans le réseau cristallin du quartz comme impuretés (i.e. Li, Na, Al, P, K, Ca, Ge, Ti), et des isotopes stables de l'oxygène, ont été menées. En fonction des conditions de croissance, la plupart des cristaux présentent des zonations, qui peuvent être facilement reliées à la distribution des éléments traces analysés par microsonde électronique, sonde ionique (SIMS) et LA-ICPMS. De fortes concentrations d'Aluminium (plusieurs milliers de parties par million atomique) ont pu être observées dans les zones les plus externes des cristaux. De plus, les concentrations en Al et en Li sont toujours corrélées; la présence d'Hydrogène déduite à partir d'analyses par FTIR suit cette même tendance. Les différentes faces des cristaux présentent des concentrations distinctes d'Al, Li et H pour des mêmes zones de croissance, avec par exemple les concentrations les plus faibles dans les zones des faces prismatiques. Cela implique la présence d'un zonage sectoriel, qui a déjà été observé principalement dans des carbonates mais jamais décrit auparavant pour des quartz. Seuls les cristaux alpins homogènes en CL dont la croissance s'est faite à plus haute température (400°C) ne présentent aucune de ces caractéristiques. Par analogie avec le zonage sectoriel en Al, élément qui se substitue au Si dans le réseau cristallin du quartz, il est possible de penser qu'un zonage sectoriel pourrait aussi s'appliquer aux isotopes de l'oxygène. Des précédentes études avaient en effet émis cette hypothèse. Nos résultats ont été obtenus à partir d'analyses à la fois in- situ par SIMS, et par extraction assistée par laser-CO2 sur des parties de quartz soigneusement séparées, et sont en accord entre les deux méthodes. Un zonage sectoriel est en effet bien présent pour les cristaux alpins, mais principalement au niveau des zones très riches en Aluminium. Cependant, il a été déterminé que la présence d'Al dans ces teneurs avait un effet plus que minimal sur le fractionnement isotopique de l'oxygène. Des différences importantes ont été observées entre les faces r & z mais aussi au sein d'une même et seule zone, indiquant que le fractionnement a pu avoir lieu en déséquilibre, ce qui est aussi visible au niveau des valeurs totalement opposées entre faces pour la dernière phase de croissance de certains cristaux. Ainsi l'association de ces résultats laisse suggérer que la présence d'un zonage sectoriel peut être liée à différents paramètres tels que le taux de croissance ou la structure de surface du cristal, mais qui n'affectent pas de la même façon l'incorporation des éléments traces et le fractionnement isotopique. La possibilité d'un zonage sectoriel est importante à prendre en compte lors de toute interprétation de données isotopiques. Les analyses des isotopes de l'oxygène effectuées par SIMS ont aussi permis de distinguer des variations importantes à petite échelle au cours de la croissance. Des mesures faites par laser CO2 sur certaines roches encaissantes, ont permis distinguer plusieurs étapes dans la croissance des minéraux et de déduire le rôle de l'encaissant et le type de fluide. En association avec de précédentes études, il a été ainsi possible de mieux contraindre la formation de ces cristaux dans le contexte alpin et la circulation de fluide au cours du métamorphisme alpin durant le Miocène.

An evaluation of the inorganic and organic geochemistry of the San Vicente Mississippi Valley-type zinc-lead district, central Peru: Implications for ore fluid composition, mixing processes, and sulfate reduction

Mississippi Tialley-type zinc-lead deposits and ore occurrences in the San Vicente belt are hosted in dolostones of the eastern Upper Triassic to Lower Jurassic Pucara basin, central Peru. Combined inorganic and organic geochemical data from 22 sites, including the main San Vicente deposit, minor ore occurrences, and barren localities, provide better understanding of fluid pathways and composition, ore precipitation mechanisms, Eh-pH changes during mineralization, and relationships between organic matter and ore formation. Ore-stage dark replacement dolomite and white sparry dolomite are Fe and rare earth element (REE) depleted, and Mn enriched, compared to the host dolomite. In the main deposit, they display significant negative Ce and probably Eu anomalies. Mixing of an incoming hot, slightly oxidizing, acidic brine (H2CO3 being the dominant dissolved carbon species), probably poor in REE and Fe, with local intraformational, alkaline, reducing waters explains the overall carbon and oxygen isotope variation and the distributions of REE and other trace elements in the different hydrothermal carbonate generations. The incoming ore fluid flowed through major aquifers, probably basal basin detrital units, with limited interaction with the carbonate host rocks. The hydrothermal carbonates show a strong regional chemical homogeneity, indicating access of the ore fluids by interconnected channelways near the ore occurrences. Negative Ce anomalies in the main deposit, that are absent at the district scale, indicate local ore-fluid chemical differences. Oxidation of both migrated and indigenous hydrocarbons by the incoming fluid provided the local reducing conditions necessary for sulfate reduction to H2S, pyrobitumen precipitation, and reduction of Eu3+ to Eu2+. Fe-Mn covariations, combined with the REE contents of the hydrothermal carbonates, are consistent with the mineralizing system shifting from reducing/rock-dominated to oxidizing/fluid-dominated conditions following ore deposition. Sulfate and sulfide sulfur isotopes support sulfide origin from evaporite-derived sulfate by thermochemical organic reduction; further evidence includes the presence of C-13-depleted calcite cements (similar to-12 parts per thousand delta(13)C) as sulfate pseudomorphs, elemental sulfur, altered organic matter in the host dolomite, and isotopically heavier, late, solid bitumen. Significant alteration of the indigenous and extrinsic hydrocarbons, with absent bacterial membrane biomarkers (hopanes) is observed. The light delta(34)S of sulfides from small mines and occurrences compared to the main deposit reflect a local contribution of isotopically light sulfur, evidence of local differences in the ore-fluid chemistry.

Elemental (C/N ratios) and isotopic (δ15N(org), δ13C(org)) compositions of sedimentary organic matter from a high-altitude mountain lake (Meidsee, 2661 m a.s.l., Switzerland): Implications for Lateglacial and Holocene Alpine landscape evolution

The deposition of Late Pleistocene and Holocene sediments in the high-altitude lake Meidsee (located at an altitude of 2661 m a.s.l. in the Southwestern Alps) strikingly coincided with global ice-sheet and mountain-glacier decay in the Alpine forelands and the formation of perialpine lakes. Radiocarbon ages of bottom-core sediments point out (pre-) Holocene ice retreat below 2700 m a.s.l., at about 16, 13, 10, and 9 cal. kyr BP. The Meidsee sedimentary record therefore provides information about the high-altitude Alpine landscape evolution since the Late Pleistocene/Holocene deglaciation in the Swiss Southwestern Alps. Prior to 5 cal. kyr BP, the C/N ratio and the isotopic composition of sedimentary organic matter (delta N-15(org), delta C-13(org)) indicate the deposition of algal-derived organic matter with limited input of terrestrial organic matter. The early Holocene and the Holocene climatic optimum (between 7.0 and 5.5 cal. kyr BP) were characterized by low erosion (decreasing magnetic susceptibility, chi) and high content of organic matter (C-org > 13 wt.%), enriched in C-13(org) (>-18 parts per thousand) with a low C/N (similar to 10) ratio, typical of modern algal matter derived from in situ production. During the late Holocene, there was a long-term increasing contribution of terrestrial organic matter into the lake (C/N > 11), with maxima between 2.4 and 0.9 cal. kyr BP. A major environmental change took place 800 years ago, with an abrupt decrease in the relative contribution of terrestrial organic material into the lake compared with aquatic organic material which subsequently largely dominated (C/N drop from 16 to 10). Nonetheless, this event was marked by a rise in soil erosion (chi), in nutrients input (N and P contents) and in anthropogenic lead deposition, suggesting a human disturbance of Alpine ecosystems 800 years ago. Indeed, this time period coincided with the migration of the Walser Alemannic people in the region, who settled at relatively high altitude in the Southwestern Alps for farming and maintaining Alpine passes.

Quantitative elemental analysis of dry-ashed bark and wood samples of birch, spruce and pine from south-western Finland using PIXE

A total of over 200 different samples of bark and wood of Silver birch, Norway spruce and Scots pine were analysed. Samples were taken from several areas in western Finland, some with known sources of atmospheric heavy metal emission (Harjavalta, Ykspihlaja). Also analytical data for pine needles from some sites are reported. The chemical analyses were performed by thick-target particle-induced X-ray emission (PIXE) spectrometry after preconcentration by dry ashing of samples at 550oC. The following elements were quantified in most of the samples: P, S, K, Ca, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Cd, Ba and Pb. The ash percentage and the chemical composition of ashes of different wood materials were also obtained, as dry ashing was used in the analytical procedure. The variations in elemental concentrations in wood and bark of an individual tree, expressed as RSDs, were mostly in the range 10 – 20 %. For several trees of the same species sampled from small areas (< 1 ha), the variations in elemental concentrations were surprisingly high (RSDs 20 – 50 %). In the vicinity of metal plants, effects of strong atmospheric heavy metal pollution (pollution factor above 100) were observed in pine bark. The increase of heavy metal content in wood samples from the same sites was quite small. Elemental concentrations in ashes of bark and wood, from areas with no local source of atmospheric pollution, were relatively uniform. Based on this observation an alternative way of demonstrating atmospheric pollution of tree bark is discussed.

Isochronal sintering of the blended elemental Ti-35Nb alloy

Titanium alloy parts are ideally suited for advanced aerospace systems and surgical implants because of their unique combination of high specific strength at both room temperature and moderately elevated temperature, in addition to excellent corrosion resistance. In this work, results of the Ti-35Nb alloy sintering are presented. This alloy, due to its lower modulus of elasticity and high biocompatibility, is a promising candidate for surgical and aerospace applications. Samples were produced by mixing of initial metallic hydride powders followed by uniaxial and cold isostatic pressing with subsequent densification by isochronal sintering between 700 and 1500 degrees C, in vacuum. Sintering behavior was studied by means of microscopy and density. Sintered samples were characterized for phase composition, microstructure and microbardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Samples sintered at high temperatures display a fine plate-like a structure and intergranular P. A few remaining pores are still found, and density above 97% for specimens sintered at 1500 degrees C is reached. (c) 2007 Elsevier B.V. All rights reserved.

Carbon isotope composition as a tool to control the quality of herbs and medicinal plants

Isotope screening is a simple test for determining the photosynthetic pathway used by plants. The scope of this work was to classify the photosynthetic type of some herbs and medicinal plants through studies of the carbon isotope composition (δ13C). Also, we propose the use of carbon isotope composition as a tool to control the quality of herbs and medicinal plants. For studies of δ13C, δ 13C‰ = [R (sample)/R (standard) - 1] × 10-3, dry leaves powdered in cryogenic mill were analyzed in a mass spectrometer coupled with an elemental analyzer for determining the ratio R = 13CO2/12CO2. In investigation of δ13C of 55 species, 23 botanical families, and 44 species possessed a C3 photosynthetic type. Six species found among the botanical families Euphorbiaceae and Poaceae were C4 plants, and 5 species found among the botanical families Agavaceae, Euphorbiaceae, and Liliaceae possessed CAM-type photosynthesis. Carbon isotope composition of plants can be used as quality control of herbs and medicinal plants, allowing the identification of frauds or contaminations. Also, the information about the photosynthetic type found for these plants can help in introducing and cultivating exotic and wild herbs and medicinal plants.

Carbon isotope composition as a tool for quality control of herbs, spices and medicinal plants

Isotope screening is a simple and cheap test for determining the photosynthetic pathway used by plants. The scope of this work was to classify the photosynthetic type of Melissa officinalis L. and Cymbopogon citratus [DC.] Stapf, through studies of the carbon isotope composition (δ13 C), and we are proposing the use of carbon isotope composition results as a tool to control the quality of medicinal plants. For studies of δ 13C (13 C% = [R (sample)/R (standard) - 1] × 10 -3), dried, powdered leaves were analyzed in a mass spectrometer coupled with an elemental analyzer for determining the ratio R (R = 13CO2/12CO2). As results, M. officinalis presented a C3 photosynthetic type, and C. citratus presented a C4 photosynthetic type. The carbon isotope composition from this study can be used as quality control of M. officinalis adulterants.

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Elemental abundances and classification of carbon-enhanced metal-poor stars

We present a detailed study of carbon-enhanced metal-poor (CEMP) stars, based on high-resolution spectroscopic observations of a sample of 18 stars. The stellar spectra for this sample were obtained at the 4.2 m William Herschel Telescope in 2001 and 2002, using the Utrecht Echelle Spectrograph, at a resolving power R similar to 52 000 and S/N similar to 40, covering the wavelength range lambda lambda 3700-5700 angstrom. The atmospheric parameters determined for this sample indicate temperatures ranging from 4750 K to 7100 K, log g from 1.5 to 4.3, and metallicities -3.0 <= [Fe/H]<=-1.7. Elemental abundances for C, Na, Mg, Sc, Ti, Cr, Cu, Zn, Sr, Y, Zr, Ba, La, Ce, Nd, Sm, Eu, Gd, Dy are determined. Abundances for an additional 109 stars were taken from the literature and combined with the data of our sample. The literature sample reveals a lack of reliable abundance estimates for species that might be associated with the r-process elements for about 67% of CEMP stars, preventing a complete understanding of this class of stars, since [Ba/Eu] ratios are used to classify them. Although eight stars in our observed sample are also found in the literature sample, Eu abundances or limits are determined for four of these stars for the first time. From the observed correlations between C, Ba, and Eu, we argue that the CEMP-r/s class has the same astronomical origin as CEMP-s stars, highlighting the need for a more complete understanding of Eu production.

Processing and Composition Effects on the Fracture Behavior of Spray-Formed 7XXX Series Al Alloys

The fracture properties of high-strength spray-formed Al alloys were investigated, with consideration of the effects of elemental additions such as zinc,manganese, and chromium and the influence of the addition of SiC particulate. Fracture resistance values between 13.6 and 25.6 MPa (m)1/2 were obtained for the monolithic alloys in the T6 and T7 conditions, respectively. The alloys with SiC particulate compared well and achieved fracture resistance values between 18.7 and 25.6 MPa (m)1/2. The spray-formed materials exhibited a loss in fracture resistance (KI) compared to ingot metallurgy 7075 alloys but had an improvedperformance compared to high-solute powder metallurgy alloys of similar composition. Characterization of the fracture surfaces indicated a predominantly intergranular decohesion, possibly facilitated by the presence of incoherent particles at the grain boundary regions and by the large strength differentialbetween the matrix and precipitate zone. It is believed that at the slip band-grain boundary intersection, particularly in the presence of large dispersoids and/or inclusions, microvoid nucleation would be significantly enhanced. Differences in fracture surfaces between the alloys in the T6 and T7 condition were observed and are attributed to inhomogeneous slip distribution, which results in strain localization at grain boundaries. The best overall combination of fracture resistance properties were obtained for alloys with minimum amounts of chromium and manganese additions.

From stellar to planetary composition: Galactic chemical evolution of Mg/Si mineralogical ratio

Aims. The main goal of this work is to study element ratios that are important for the formation of planets of different masses. Methods. We study potential correlations between the existence of planetary companions and the relative elemental abundances of their host stars. We use a large sample of FGK-type dwarf stars for which precise Mg, Si, and Fe abundances have been derived using HARPS high-resolution and high-quality data. Results. A first analysis of the data suggests that low-mass planet host stars show higher [Mg/Si] ratios, while giant planet hosts present [Mg/Si] that is lower than field stars. However, we found that the [Mg/Si] ratio significantly depends on metallicity through Galactic chemical evolution. After removing the Galactic evolution trend only the difference in the [Mg/Si] elemental ratio between low-mass planet hosts and non-hosts was present in a significant way. These results suggest that low-mass planets are more prevalent around stars with high [Mg/Si]. Conclusions. Our results demonstrate the importance of Galactic chemical evolution and indicate that it may play an important role in the planetary internal structure and composition. The results also show that abundance ratios may be a very relevant issue for our understanding of planet formation and evolution.

(Table 1) Water column biogenic silica concentrations and Si isotopic composition during Marion Dufresne cruise MD166 off South Africa

Southern Ocean biogeochemical processes have an impact on global marine primary production and global elemental cycling, e.g. by likely controlling glacial-interglacial pCO2 variation. In this context, the natural silicon isotopic composition (d30Si) of sedimentary biogenic silica has been used to reconstruct past Si-consumption:supply ratios in the surface waters. We present a new dataset in the Southern Ocean from a IPY-GEOTRACES transect (Bonus-GoodHope) which includes for the first time summer d30Si signatures of suspended biogenic silica (i) for the whole water column at three stations and (ii) in the mixed layer at seven stations from the subtropical zone up to the Weddell Gyre. In general, the isotopic composition of biogenic opal exported to depth was comparable to the opal leaving the mixed layer and did not seem to be affected by any diagenetic processes during settling, even if an effect of biogenic silica dissolution cannot be ruled out in the northern part of the Weddell Gyre. We develop a mechanistic understanding of the processes involved in the modern Si-isotopic balance, by implementing a mixed layer model. We observe that the accumulated biogenic silica (sensu Rayleigh distillation) should satisfactorily describe the d30Si composition of biogenic silica exported out of the mixed layer, within the limit of the current analytical precision on the d30Si. The failures of previous models (Rayleigh and steady state) become apparent especially at the end of the productive period in the mixed layer, when biogenic silica production and export are low. This results from (1) a higher biogenic silica dissolution:production ratio imposing a lower net fractionation factor and (2) a higher Si-supply:Si-uptake ratio supplying light Si-isotopes into the mixed layer. The latter effect is especially expressed when the summer mixed layer becomes strongly Si-depleted, together with a large vertical silicic acid gradient, e.g. in the Polar Front Zone and at the Polar Front.

Geochemical data and mineralogical properties of bulk sediment composition of ODP Hole 195-1202B

During Leg 195 of the Ocean Drilling Program, Site 1202 was drilled in the subtropical northwestern Pacific Ocean beneath the Kuroshio (Black Current) between northern Taiwan and the Ryukyu Island Arc on the northern flank of the I-Lan Ridge at 1274 m water depth. The upper 110 m of the Site 1202 section, composed of dark grey calcareous silty clay, provide an expanded record of environmental changes during the last 28 kyr. The sediments were deposited at high sedimentation rates between 3.0 and 5.0 m/kyr and peak values of 9.0 m/kyr between 15.1 and 11.2 ka BP. Variations in the modes and sources of detrital sediment input, as inferred from sediment granulometry, mineralogy, and elemental XRF-scanner data, reflect changes in environmental boundary conditions related to sea-level changes, Kuroshio variability, and the climate-driven modes of fluvial runoff. The provenance data point to increased sediment supply from northwestern Taiwan between 28 and 19.5 ka BP and from East China sources between 19.5 and 11.2 ka BP. The change in provenance at 19.5 ka BP reflects increased fluvial runoff from the Yangtze River and strong sediment reworking from the East China Sea shelf in the course of increased humidity and postglacial sea-level rise, particularly after 15.1 ka BP. The Holocene was dominated by sediments that originated from rivers in northeastern Taiwan. For the pre-Holocene period prior to 11.2 ka BP, low portions of sortable silt (63-10 ?m) show that the Kuroshio did not enter the Okinawa Trough, because of low sea-level. In turn, high proportions of sortable silt and sediment provenance from northeastern Taiwan point to strong ocean circulation under the direct and persistent influence of the Kuroshio during the Holocene. The reentrance of the Kuroshio to the Okinawa Trough was heralded by two pulses in relative current strengthening at 11.2 and 9.5 ka BP, as documented by stepwise increases in sortable silt in the lower Holocene section. From a global perspective, environmental changes in the southern Okinawa Trough show affinities to climate change in the western Pacific warm pool with little influence of climate teleconnections from the North Atlantic realm, otherwise seen in many other marine and terrestrial palaeoclimate records from southeastern Asia.

(Table 1) Sr isotopes and chemical composition of DSDP Hole 61-462A basalts

Sixteen elemental abundances and 87Sr/86Sr ratio of the Nauru Basin basalt (Cores 75 to 90: sub-bottom depths 950 m to 1050 m) from Hole 462A have been determined by inductively coupled plasma-optical emission spectroscopy and mass spectrometry. The result indicates that the basalt is a new type of oceanic tholeiite, elementally similar to normal mid-oceanic ridge basalts and isotopically similar to oceanic island-type basalts.

Chemical composition and isotopic ratios of basic lavas from Iceland and the surrounding ocean floor

Major and trace dement data are used to establish the nature and extent of spatial and temporal chemical variations in basalts erupted in the Iceland region of the North Atlantic Ocean. The ocean floor samples are those recovered by legs 38 and 49 of the Deep Sea Drilling Project. Within each of the active zones on Iceland there are small scale variations in the light rare earth elements and ratios such as K/Y: several central complexes and their associated fissure swarms erupt basalts with values of K/Y distinct from those erupted at adjacent centres; also basalts showing a wide range of immobile trace element ratios occur together within single vertical sections and ocean floor drill holes. Although such variations can be explained in terms of the magmatic processes operating on Iceland they make extrapolations from single basalt samples to mantle sources underlying the outcrop of the sample highly tenuous. 87Sr/86Sr ratios measured for 25 of the samples indicate a total range from 0.7028 in a tholeiite from the Reykjanes Ridge to 0.7034 in an alkali basalt from Iceland and are consistent with other published ratios from the region. A positive correlation between 87Sr/86Sr and Ce/Yb ratios indicates the existence of systematic isotopic and elemental variations in the mantle source region. An approximately fivefold variation in Ce/Yb ratio observed in basalts with the same 87Sr/86Sr ratio implies that different degrees and types of partial melting have been involved in magma genesis from a single mantle composition. 87Sr/86Sr ratios above 0.7028, Th/U ratios close to 4 and La/Ta ratios close to 10 distinguish most basalts erupted in this part of the North Atlantic Ocean from normal mid-ocean ridge basalt (N-type MORB) - although N-type MORB has been erupted at extinct spreading axes just to the north and northeast of Iceland as well as the presently active Iceland-Jan Mayen Ridge. Comparisons with the hygromagmatophile element and radiogenic isotope ratios of MORB and the estimated primordial mantle indicate that the mantle sources producing Iceland basalts have undergone previous depletion followed by more recent enrichment events. A veined mantle source region is proposed in preference to the mantle plume model to explain the chemical variations.