Development and formative evaluation of a motorcycle rider training intervention to address risk taking

The need to address on-road motorcycle safety in Australia is important due to the disproportionately high percentage of riders and pillions killed and injured each year. One approach to preventing motorcycle-related injury is through training and education. However, motorcycle rider training lacks empirical support as an effective road safety countermeasure to reduce crash involvement. Previous reviews have highlighted that risk-taking is a contributing factor in many motorcycle crashes, rather than merely a lack of vehicle-control skills (Haworth & Mulvihill, 2005; Jonah, Dawson & Bragg, 1982; Watson et al, 1996). Hence, though the basic vehicle-handling skills and knowledge of road rules that are taught in most traditional motorcycle licence training programs may be seen as an essential condition of safe riding, they do not appear to be sufficient in terms of crash reduction. With this in mind there is considerable scope for the improvement of program focus and content for rider training and education. This program of research examined an existing traditional pre-licence motorcycle rider training program and formatively evaluated the addition of a new classroom-based module to address risky riding; the Three Steps to Safer Riding program. The pilot program was delivered in the real world context of the Q-Ride motorcycle licensing system in the state of Queensland, Australia. Three studies were conducted as part of the program of research: Study 1, a qualitative investigation of delivery practices and student learning needs in an existing rider training course; Study 2, an investigation of the extent to which an existing motorcycle rider training course addressed risky riding attitudes and motives; and Study 3, a formative evaluation of the new program. A literature review as well as the investigation of learning needs for motorcyclists in Study 1 aimed to inform the initial planning and development of the Three Steps to Safer Riding program. Findings from Study 1 suggested that the training delivery protocols used by the industry partner training organisation were consistent with a learner-centred approach and largely met the learning needs of trainee riders. However, it also found that information from the course needs to be reinforced by on-road experiences for some riders once licensed and that personal meaning for training information was not fully gained until some riding experience had been obtained. While this research informed the planning and development of the new program, a project team of academics and industry experts were responsible for the formulation of the final program. Study 2 and Study 3 were conducted for the purpose of formative evaluation and program refinement. Study 2 served primarily as a trial to test research protocols and data collection methods with the industry partner organisation and, importantly, also served to gather comparison data for the pilot program which was implemented with the same rider training organisation. Findings from Study 2 suggested that the existing training program of the partner organisation generally had a positive (albeit small) effect on safety in terms of influencing attitudes to risk taking, the propensity for thrill seeking, and intentions to engage in future risky riding. However, maintenance of these effects over time and the effects on riding behaviour remain unclear due to a low response rate upon follow-up 24 months after licensing. Study 3 was a formative evaluation of the new pilot program to establish program effects and possible areas for improvement. Study 3a examined the short term effects of the intervention pilot on psychosocial factors underpinning risky riding compared to the effects of the standard traditional training program (examined in Study 2). It showed that the course which included the Three Steps to Safer Riding program elicited significantly greater positive attitude change towards road safety than the existing standard licensing course. This effect was found immediately following training, and mean scores for attitudes towards safety were also maintained at the 12 month follow-up. The pilot program also had an immediate effect on other key variables such as risky riding intentions and the propensity for thrill seeking, although not significantly greater than the traditional standard training. A low response rate at the 12 month follow-up unfortunately prevented any firm conclusions being drawn regarding the impact of the pilot program on self-reported risky riding once licensed. Study 3a further showed that the use of intermediate outcomes such as self-reported attitudes and intentions for evaluation purposes provides insights into the mechanisms underpinning risky riding that can be changed by education and training. A multifaceted process evaluation conducted in Study 3b confirmed that the intervention pilot was largely delivered as designed, with course participants also rating most aspects of training delivery highly. The complete program of research contributed to the overall body of knowledge relating to motorcycle rider training, with some potential implications for policy in the area of motorcycle rider licensing. A key finding of the research was that psychosocial influences on risky riding can be shaped by structured education that focuses on awareness raising at a personal level and provides strategies to manage future riding situations. However, the formative evaluation was mainly designed to identify areas of improvement for the Three Steps to Safer Riding program and found several areas of potential refinement to improve future efficacy of the program. This included aspects of program content, program delivery, resource development, and measurement tools. The planned future follow-up of program participants' official crash and traffic offence records over time may lend further support for the application of the program within licensing systems. The findings reported in this thesis offer an initial indication that the Three Steps to Safer Riding is a useful resource to accompany skills-based training programs.

Formation of nanostructured porous Cu-Au surfaces : the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu–Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu2O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu–Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Risk factors for ocular surface squamous neoplasia recurrence after treatment with topical mitomycin C and interferon alpha-2b

Purpose To determine the rate of recurrence and associated risk factors following the use of mitomycin C (MMC) and/or interferon alpha-2b (IFN) for management of non-invasive ocular surface squamous neoplasia (OSSN). Design Retrospective non-comparative interventional case series. Methods Clinical practice setting of 135 patients treated consecutively with topical MMC (0.4 mg/mL) and/or IFN (1 million units/mL) for OSSN observed for clinical recurrence. Results Clinical recurrences were diagnosed in 19 of 135 (14.1%) eyes following topical treatment. The mean time to recurrence was 17.2 months (range 4 - 61) with 14 (73.7%) recurring within a two year period. There was no greater risk of recurrence identified for variables including lesion size, lesion location, gender, age, treatment type or duration. Post-hoc log-Rank pairwise comparisons revealed that lesions initially treated using surgery alone had significantly reduced time to recurrence (21.1 ± 5.6 months) compared to previous topical treatment with MMC (with or without surgery) (29.6 ± 4.7 months) (p = 0.04) and primary OSSN (23.2 ± 1.8 months) (p = 0.09). Conclusions Topical MMC and IFN are an effective treatment modality for a wide range of non-invasive OSSN. Topical therapy avoids the morbidity of excisional surgery with equivalent or reduced recurrence rates and should be considered as primary therapy.

Learning about being effective mentors : professional learning communities and mentoring

This study aimed to explore experienced mentors’ understandings about professional learning communities (PLCs), mentoring and leadership. This research analyses audio-taped transcripts and written responses from 27 experienced mentors who operate in varied roles (e.g., university academics, school executives, teachers, learning support personnel). Findings indicated that PLCs can provide professional renewal for existing teachers and that mentoring within PLCs can further advance knowledge about effective practices. PLCs can include other staff members and key stakeholders (e.g., preservice teachers, teacher aides) who can contribute to the learning within the group. Mentoring and PLCs can be cost-effective strategic levers for advancing professional knowledge.

Effective punishment experiences : the need for a more comprehensive approach to conceptualising behavioural punishers and reinforcers in a road safety context

Determining what consequences are likely to serve as effective punishment for any given behaviour is a complex task. This chapter focuses specifically on illegal road user behaviours and the mechanisms used to punish and deter them. Traffic law enforcement has traditionally used the threat and/or receipt of legal sanctions and penalties to deter illegal and risky behaviours. This process represents the use of positive punishment, one of the key behaviour modification mechanisms. Behaviour modification principles describe four types of reinforcers: positive and negative punishments and positive and negative reinforcements. The terms ‘positive’ and ‘negative’ are not used in an evaluative sense here. Rather, they represent the presence (positive) or absence (negative) of stimuli to promote behaviour change. Punishments aim to inhibit behaviour and reinforcements aim to encourage it. This chapter describes a variety of punishments and reinforcements that have been and could be used to modify illegal road user behaviours. In doing so, it draws on several theoretical perspectives that have defined behavioural reinforcement and punishment in different ways. Historically, the main theoretical approach used to deter risky road use has been classical deterrence theory which has focussed on the perceived certainty, severity and swiftness of penalties. Stafford and Warr (1993) extended the traditional deterrence principles to include the positive reinforcement concept of punishment avoidance. Evidence of the association between punishment avoidance experiences and behaviour has been established for a number of risky road user behaviours including drink driving, unlicensed driving, and speeding. We chose a novel way of assessing punishment avoidance by specifying two sub-constructs (detection evasion and punishment evasion). Another theorist, Akers, described the idea of competing reinforcers, termed differential reinforcement, within social learning theory (1977). Differential reinforcement describes a balance of reinforcements and punishments as influential on behaviour. This chapter describes comprehensive way of conceptualising a broad range of reinforcement and punishment concepts, consistent with Akers’ differential reinforcement concept, within a behaviour modification framework that incorporates deterrence principles. The efficacy of three theoretical perspectives to explain self-reported speeding among a sample of 833 Australian car drivers was examined. Results demonstrated that a broad range of variables predicted speeding including personal experiences of evading detection and punishment for speeding, intrinsic sensations, practical benefits expected from speeding, and an absence of punishing effects from being caught. Not surprisingly, being younger was also significantly related to more frequent speeding, although in a regression analysis, gender did not retain a significant influence once all punishment and reinforcement variables were entered. The implications for speed management, as well as road user behaviour modification more generally, are discussed in light of these findings. Overall, the findings reported in this chapter suggest that a more comprehensive approach is required to manage the behaviour of road users which does not rely solely on traditional legal penalties and sanctions.

Findings report on the endemic fluorosis in the lower reaches of Xiaoqing river [小清河下游地区地方性氟中毒调查报告]

Objective: To find out the present prevalent situation of the endemic fluorosis in the lower reaches of Xiao Qing River , and to look for an effective way to altering sources to lower fluoride level. Methods: To determine the water fluoride content in the drinking water sources and investigate the basic condition of the water sources (type of the water sources, the depth of well, etc) in the three towns of this area . Make a sampling survey of the children aged from 8 to 12 about the dent al fluoro sis and determine the urine fluoride, and the skeletal fluorosis among the crowd over 16 y ears of age. Results: The survey shows that the lower reaches of Xiaoqing river belong to the drinking water type of endemic fluorosis caused by drinking deep well water. In this area, 65.71% of the water sources contain high level of fluoride, 57.51% of the children suffer from dental fluorosis, 0.58% of the crowd over 16 years of age suffer from skeletal fluorosis. High water fluoride rate is related with the depth of the well. If the well is over 500 metres deep, the fluoride content rate is clearly low. Conclusions: In this area, there are still some water sources which contain normal level of fluoride. By increasing the depth of the well down to 500 metres, the problem of high fluoride in water might be solved.

The beneficial effects of specialist thoracic surgery on the resection rate for non-small-cell lung cancer

We aimed to evaluate the effect of the appointment of a dedicated specialist thoracic surgeon on surgical practice for lung cancer previously served by cardio-thoracic surgeons. Outcomes were compared for the 240 patients undergoing surgical resection for lung cancer in two distinct 3-year periods: Group A: 65 patients, 1994-1996 (pre-specialist); Group B: 175 patients, 1997-1999 (post-specialist). The changes implemented resulted in a significant increase in resection rate (from 12.2 to 23.4%, P<0.001), operations in the elderly (over 75 years) and extended resections. There were no significant differences in stage distribution, in-hospital mortality or stage-specific survival after surgery. Lung cancer surgery provided by specialists within a multidisciplinary team resulted in increased surgical resection rates without compromising outcome. Our results strengthen the case for disease-specific specialists in the treatment of lung cancer. © 2004 Published by Elsevier Ireland Ltd.

Outsider board activity, ownership structure and firm value : evidence from Korea

Using a sample of publicly listed firm in Korea from 2002 to 2006, this article examines the impact of board monitoring on firm value and productivity. We use outsider's attendance of board meetings as a proxy for board monitoring. Consistent with the commitment hypothesis, we find that outsider's attendance rate increases firm value, suggesting that attending board meeting itself is a strong signal that reflects outsider's intention to monitor insiders. While ownership of controlling shareholders negatively affects firm value, this relationship is not moderated by increased monitoring by outsiders. Our findings provide further evidence that the outside director system is less effective in chaebol-affiliated firms. Results also indicate that the effect of outsider's board monitoring activity on investor's valuation of the firm is greater than on productivity improvement of the firm. Our conclusions are robust for possible endogeneity in the relationship between firm value and board attendance by outside directors.

What encourages sun protection among outdoor workers from four industries?

Objectives: We aimed to identify current practice of sun protection and factors associated with effective use in four outdoor worker industries in Queensland, Australia. Methods: Workplaces in four industries with a high proportion of outdoor workers (building/construction, rural/farming, local government, and public sector industries) were identified using an online telephone directory, screened for eligibility, and invited to participant via mail (n=15, recruitment rate 37%). A convenience sample of workers were recruited within each workplace (n=162). Workplaces’ sun protective policies and procedures were identified using interviews and policy analysis with workplace representatives, and discussion groups and computer-assisted telephone interviews with workers. Personal characteristics and sun protection knowledge, attitudes and behaviors were collated and analysed. Results: Just over half the workplaces had an existing policy which referred to sun protection (58%), and most provided at least some personal protective equipment (PPE), but few scheduled work outside peak sun hours (43%) or provided skin checks (21%). Several worker and workplace characteristics were associated with greater sun protection behaviour among workers, including having received education on the use of PPE (p<0.001), being concerned about being in the sun (p=0.002); and working in a smaller workplace (p=0.035). Conclusions: Uptake of sun protection by outdoor workers is affected by a complex interplay of both workplace and personal factors, and there is a need for effective strategies targeting both the workplace environment and workers’ knowledge, attitudes and behaviors to decrease harmful sun exposure further.

Effective technologies for noninvasive remote monitoring in heart failure

Background Trials of new technologies to remotely monitor for signs and symptoms of worsening heart failure are continually emerging. The extent to which technological differences impact the effectiveness of non-invasive remote monitoring for heart failure management is unknown. Objective To examine the effect of specific technology used for non-invasive remote monitoring of people with heart failure on all-cause mortality and heart failure-related hospitalisations. Methods A sub-analysis of a large systematic review and meta-analysis was conducted. Studies were stratified according to the specific type of technology used and separate meta-analyses were performed. Four different types of non-invasive remote monitoring technologies were identified including structured telephone calls, videophone, interactive voice response devices and telemonitoring. Results Only structured telephone calls and telemonitoring were effective in reducing the risk of all-cause mortality (RR 0.87; 95% CI=0.75-1.01; p=0.06 and 0.62; 95% CI=0.50-0.77; p<0.0001) and heart failure-related hospitalisations (RR 0.77; 95% CI=0.68-0.87; p<0.001) and 0.75; 95% CI=0.63-0.91; p=0.003). More research data is required for videophone and interactive voice response technologies. Conclusions This sub-analysis identified that only two of the four specific technologies used for non-invasive remote monitoring in heart failure improved outcomes. When results of studies that involved these disparate technologies were combined in previous meta-analyses, significant improvements in outcomes were identified. As such, this study has highlighted implications for future meta-analyses of randomised controlled trials focused on evaluating the effectiveness of remote monitoring in heart failure.

Inward internationalization of consumer services : lessons from Australian firms

Purpose - The aim of this paper is to explore the inward internationalization process of consumer services. A review of the service internationalization literature is conducted and the resource-based view of the firm is used as a theoretical approach. Design/methodology - Case study methodology is used to explore the internationalization process of five different consumer service sectors: tourism, education, accommodation, transport and entertainment. The main data collection method was interviews conducted with top managers of 12 Australian consumer service firms from these sectors. Findings - Findings of this study show that inward internationalizing services confront most of their barriers, such as immigration policies, exchange rate fluctuations, and cultural differences, in the domestic market where the service is provided. The findings also suggest that superior intentional performance for consumer service firms combines firm-specific resources and capabilities, such as market orientation, service quality, cultural sensitivity, international communicational activities, partnerships and networks, with country-specific resources and capabilities, such as country-of-origin image and government support. Research limitations/implications - This is one of the few studies in the academic literature that directly addresses the issue of inward internationalization of consumer services. Limitations derive from the qualitative nature of this study. Practical implications - The process of inward internationalization applies to a broad range of service industries and can assist firms to develop more effective international marketing strategies. Originality/value - This study contributes to the international services literature by identifying the main barriers and drivers of international performance for inward internationalizing consumer service firms, which is a topic that has been neglected in the literature.

Educating for digital futures : what the learning strategies of digital content professionals can teach higher education

Beginning in the second half of the 20th century, ICTs transformed many societies from industrial societies in which manufacturing was the central focus, into knowledge societies in which dealing effectively with data and information has become a central element of work (Anderson, 2008). To meet the needs of the knowledge society, universities must reinvent their structures and processes, their curricula and pedagogic practices. In addition to this, of course higher education is itself subject to the sweeping influence of ICTs. But what might effective higher education look like in the 21st century? In designing higher education systems and learning experiences which are responsive to the learning needs of the future and exploit the possibilities offered by ICTs, we can learn much from the existing professional development strategies of people who are already successful in 21st century fields, such as digital media. In this study, I ask: (1) what are the learning challenges faced by digital media professionals in the 21st century? (2) what are the various roles of formal and informal education in their professional learning strategies at present? (3) how do they prefer to acquire needed capabilities? In-depth interviews were undertaken with successful Australian digital media professionals working in micro businesses and SMEs to answer these questions. The strongest thematic grouping that emerged from the interviews related to the need for continual learning and relearning because of the sheer rate of change in the digital media industries. Four dialectical relationships became apparent from the interviewees’ commentaries around the learning imperatives arising out of the immense and continual changes occurring in the digital content industries: (1) currency vs best practice (2) diversification vs specialisation of products and services (3) creative outputs vs commercial outcomes (4) more learning opportunities vs less opportunity to learn. These findings point to the importance of ‘learning how to learn’ as a 21st century capability. The interviewees were ambivalent about university courses as preparation for professional life in their fields. Higher education was described by several interviewees as having relatively little value-add beyond what one described as “really expensive credentialling services.” For all interviewees in this study, informal learning strategies were the preferred methods of acquiring the majority of knowledge and skills, both for ongoing and initial professional development. Informal learning has no ‘curriculum’ per se, and tends to be opportunistic, unstructured, pedagogically agile and far more self-directed than formal learning (Eraut, 2004). In an industry impacted by constant change, informal learning is clearly both essential and ubiquitous. Inspired by the professional development strategies of the digital media professionals in this study, I propose a 21st century model of the university as a broad, open learning ecology, which also includes industry, professionals, users, and university researchers. If created and managed appropriately, the university learning network becomes the conduit and knowledge integrator for the latest research and industry trends, which students and professionals alike can access as needed.

Hyperelastic constitutive relationship for the strain-rate dependent behavior of shoulder and other joint cartilages

Non-linear finite deformations of articular cartilages under physiological loading conditions can be attributed to hyperelastic behavior. This paper contains experimental results of indentation tests in finite deformation and proposes an empirical based new generalized hyperelastic constitutive model to account for strain-rate dependency for humeral head cartilage tissues. The generalized model is based on existing hyperelastic constitutive relationships that are extensively used to represent biological tissues in biomechanical literature. The experimental results were obtained for three loading velocities, corresponding to low (1x10-3 s-1), moderate and high strain-rates (1x10-1 s-1), which represent physiological loading rates that are experienced in daily activities such as lifting, holding objects and sporting activities. Hyperelastic material parameters were identified by non linear curve fitting procedure. Analysis demonstrated that the material behavior of cartilage can be effectively decoupled into strain-rate independent(elastic) and dependent parts. Further, experiments conducted using different indenters indicated that the parameters obtained are significantly affected by the indenter size, potentially due to structural inhomogeneity of the tissue. The hyperelastic constitutive model developed in this paper opens a new avenue for the exploration of material properties of cartilage tissues.

The Yd2 resistance to barley yellow dwarf virus is effective in barley plants but not in their leaf protoplasts

The Yd2 gene for “resistance” to barley yellow dwarf virus (BYDV) has been widely used in barley (Hordeum vulgare). We have tested Australian isolates of BYDV of varying severity against barley genotypes with and without the Yd2 gene and report here a positive relationship between symptoms and virus levels determined by ELISA. Cultivar Shannon is the result of backcrossing the resistant line CI 3208 to cultivar Proctor, a susceptible line. It appears to be intermediate in reaction to BYDV between Proctor and CI 3208, although it carries the major gene, Yd2. Unlike the whole plant studies, no significant differences were observed with regard to the ability of protoplasts derived from these various genotypes to support BYDV replication. It is therefore demonstrated for the first time that the Yd2 gene is not among the small number of resistance genes which are effective against virus replication in isolated protoplasts.

Construct design for efficient, effective and high-throughput gene silencing in plants

Post-transcriptional silencing of plant genes using anti-sense or co-suppression constructs usually results in only a modest proportion of silenced individuals. Recent work has demonstrated the potential for constructs encoding self-complementary 'hairpin' RNA (hpRNA) to efficiently silence genes. In this study we examine design rules for efficient gene silencing, in terms of both the proportion of independent transgenic plants showing silencing, and the degree of silencing. Using hpRNA constructs containing sense/anti-sense arms ranging from 98 to 853 nt gave efficient silencing in a wide range of plant species, and inclusion of an intron in these constructs had a consistently enhancing effect. Intron-containing constructs (ihpRNA) generally gave 90-100% of independent transgenic plants showing silencing. The degree of silencing with these constructs was much greater than that obtained using either co-suppression or anti-sense constructs. We have made a generic vector, pHANNIBAL, that allows a simple, single PCR product from a gene of interest to be easily converted into a highly effective ihpRNA silencing construct. We have also created a high-throughput vector, pHELLSGATE, that should facilitate the cloning of gene libraries or large numbers of defined genes, such as those in EST collections, using an in vitro recombinase system. This system may facilitate the large-scale determination and discovery of plant gene functions in the same way as RNAi is being used to examine gene function in Caenorhabditis elegans.