Aqui, todo mundo é da mesma família : parentesco e relações étnicas entre os ciganos na cidade alta, Limoeiro do Norte CE

This study aims to understand how facing a context of Constant interaction whit the local population, the gypsies family Alves dos Santos, neighborhood residentes in uptown, Limoeiro do Norte Ce, maintain a sense of ethnic belonging. To that end, I analyze both the social relations between Gypsies and non-gypsies community, as it is from the contact that the social boundaries are delineated, as the discourses and social representations that are used to qualify them from stigma. So, I found that grounded in the notion of family, gypsies are seen as a group, searching the history / past nomadic origing and blood common elements that underlie its condition, and the language a cultural trait that makes it possible to establish objective distinctions among gypsies and other community residentes, becoming thus a diacritical mark.

Análise dos remanescentes de mata atlântica do Estado do Rio Grande do Norte : uma perspectiva em alta resolução

The habitat loss and fragmentation are considered the main threats to the biodiversity. These threats operate at the landscape level, which drives the need to manage entire landscapes, not just its components. Although systematic monitoring of the Atlantic Forest biome has been ongoing since the late eighties, current data on forest fragmentation for the sub-region of Pernambuco are practically nonexistent. This study aimed to map out, with high spatial resolution, the remnants of Atlantic forest in Rio Grande do Norte, and conduct a landscape level analysis. The results show that the landscape is highly fragmented, where about 13.6% to 17% of biome remains. Most of the fragments is less than 10 ha, while a few fragments have area larger than 100 ha. Although the high degree of fragmentation, the average distance between fragments found was small (128 m), this estimate is lower than has been observed for the biome (1440m). There is evidence that abrupt changes in the quantification of landscape structure can occur when one observes the fragmentation at high spatial resolution. The results presented here can be used in management actions, in order to make the scenario more conducive to maintaining biodiversity.

Concentrações séricas hormonais em vacas azebuadas submetidas à baixa e alta ingestão alimentar

O objetivo deste trabalho foi avaliar a influência da ingestão alimentar nas concentrações séricas de hormônios reprodutivos e metabólicos em vacas azebuadas. Dezoito vacas foram divididas em dois grupos: 170% (alta ingestão = A) e 66% (baixa ingestão = B) da dieta de manutenção. Com 21 dias nas dietas experimentais, as vacas tiveram o estro sincronizado. Posteriormente, os ovários foram avaliados por ultra-sonografia transretal e sangue foi coletado diariamente até o dia 7 do ciclo (ovulação = dia 1). Na análise estatística, utilizou-se o teste t. As vacas ganharam 1,1 kg por dia no grupo A e perderam 1,5 kg por dia de PV no grupo B. Apesar de não ter havido diferença entre os grupos no diâmetro máximo do folículo ovulatório, o grupo A apresentou pico pré-ovulatório de estradiol sérico menor. Não foi observada diferença entre os grupos quanto ao volume luteal e concentração sérica de progesterona no dia 7 do ciclo e de FSH, IGF-I e insulina séricos no período peri-ovulatório. As dietas experimentais não alteraram a função ovariana e as concentrações séricas de hormônios reprodutivos e metabólicos, com exceção do estradiol, sugerindo que, no grupo de alta ingestão, ocorreu maior metabolismo desse hormônio.

Memorial de formação: um dispositivo de pesquisa ação - formação

La recherche prend comme point de départ la dimension formative du mémoire de formation, considerée comme constitutive de l´écriture de soi, et cherche à problématiser cette dimension au tour du questionnement suivant: Comment le mémoire de formation devient-il un instrument de recherche-action-formation? Les analyses s´appuient sur les principes théoriques du paradigme anthropoformateur, proposé par Pineau (2005), les études réalisées par Passeggi (2006ª, 2006b, 2007, 2008ª, 2008b) sur les mémoires, les travaux de recherche de Nóvoa (1988, 1995), de Josso (2004), de Souza (2006) et de Fontana (2000), qui conçoivent la formação du point de vue de l´ apprenant. L´univers de la recherche s´est circonscrit à la situation de formation des éducateurs de la zone rurale, étudiants en Pédagogie dans le PROFORMAÇÃO (CAMEAM), à l´Univeristé de l´Etat du Rio Grande du Nord (UERN), pendant le second semestre de 2005. La recherche a croisé diférents types de démarche pour recueillir les données empiriques: l´observation du processus d´élaboration des mémoires; un questionnaire; des entretiens informels avec les enseignants en formation et avec les formateurs; et 09 mémoires, écrits par les participants de la recherche. Les analyses des données empiriques montrent que l´écriture des mémoires, en tant que démarche de recherche-action-formation, révelent que la dimension formative se dédouble en d´autres dimensions: etnosociologique, heuristique, herméneutique, social et afective, autopoiétique et politique. Dans la quête de soi (recherche), mise en oeuvre dans et par l´écriture (action), chaque narrateur construit de nouveaux sens à la vie et (re)signifient les représentations de soi (formation). Les résultats confirment la richesse et les potentialités du mémoire, même dans des conditions non ideal, ce qui permet d´affirmer as valeur travail académique important dans la formation des enseignants

A videobiografia como dispositivo de pesquisa-ação-formação: uma prática educativa com adolescentes abrigados

The focus of this thesis is a production of video biographies with/by sheltered teenagers. The general objective is discuss the potential production of video biographies while a device of research-action-formation. From de point of view of research, the study interrogates cultural practices that demarcates the passage of teenagers in shelter institutional; From the point of view of action, seeks to identify the modes of appropriation of space for audiovisual creation by teenagers; and, from the point of view of formation, asks the potentiality of audiovisual language while the way from which teenagers can auto-configure themselves responsibly, in the reinvention of places and others worlds for them. The research falls in the intersection of qualitative approach of ethnographic and of research-action-formation. Is anchored theoretically in autobiographical approaches - Pineau (2005); Passeggi (2008); Delory-Momberger (2008); Josso (2010) e Bertaux (2010) - and in the filmic method - Ramos (2003); Wohlgemuth (2005) and Comoli (2009). Participated in the research eleven teenagers members of the production cycle of biographical traces, among these, the three teenagers who advanced to cycles of audiovisual recording life narratives and reflective exercises around produced reports, procedures of which we extract the set of empirical material analyzed The analysis revealed that teens use in under three types of practices: the practices of mess , as way of expression; the practices of evasion , as resistance to restraint the right to come and go, and the practices of claim a regime of "truth" to the institutional environment, which emerge as a survival tactic in the face of paths desvínculos, family abandonment and neglect. The study also showed the appropriation of spaces of audio-visual creation meaningful expression through music by teenagers and encourage dialogue between and with the teenagers and the achievement of reflective exercises focused for awareness of their stories in becoming. These findings show a broader sense the thesis that visual language is a potent mobilizer artifact reflections and empowerment of individuals in situations of social exclusion

Características agronômicas e qualidade comercial de cultivares de milho pipoca em alta população

Com o objetivo de identificar cultivares de milho pipoca que se constituam em alternativa viável aos produtores foi conduzido um experimento em delineamento experimental de blocos casualizados, com cinco genótipos de milho pipoca (BRS Ângela, Zélia, IAC 112, IAC 12 e IAC TC-01) e quatro repetições, na safra 2003/2004. O experimento foi instalado em espaçamento entre as linhas de 60 cm, com densidade populacional de 75 mil plantas por hectare. No decorrer do experimento, foram avaliadas características agronômicas e comerciais em condição de campo e de laboratório. A variedade BRS Ângela apresentou maior produtividade, seguida pelos híbridos simples IAC, com Zélia (híbrido triplo) apresentando menor produtividade. O híbrido simples IAC 12 apresentou pior qualidade comercial de pipoca. A produção de grãos está associada positivamente com o número de grãos por espiga e com a massa de 1.000 grãos e negativamente com o teor de Ntotal no grão. A qualidade comercial se correlacionou negativamente com a massa de 1.000 grãos.

Evidências de validação de um protocolo para assistência às pessoas com úlceras venosas em serviços de alta complexidade

Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs . After analyzing the ratios obtained in this step, which reported kappa between 0.75 and 0.96 and between 0.80 and 0.98 IVC, and the suggestions of the judges, the protocol was adjusted and subjected to empirical evidence to validate the clinical setting at the University Hospital Onofre Lopes in Natal / RN. Evidence of validation in the clinical setting involved 4 judges who acted in pairs (paired) evaluated 32 patients with venous ulcers in the clinical context of high complexity. In both stages, we used the Kappa Index and Content Validity Index to analyze the responses of the judges. The parameters set as acceptable for these indices were: Kappa ≥ 0.61 and Content Validity Index > 0.80. Any evidence of content validity, as evidence of validation in the clinical context, the protocol items that have not reached Kappa and Content Validity Index established indices were excluded and some items were modified or added after suggestions. The process of content validation evidence and evidence of validation in the clinical setting allowed the improvement of the protocol for the care of people with venous ulcers initially proposed. The initial version of the protocol, built from the literature, contained 15 categories and 108 items; after evidence of content validity, remained the reduction to 15 categories with 91 items; the final version, clinically validated, is composed of the same 15 categories, 76 items. The protocol was validated in its content and in the clinical aspect, so we accepted the alternative hypothesis in the study. This protocol may contribute to the care system, allowing tailor behaviors and promote greater resolution in the treatment of people with venous ulcers in health services of high complexity

A Acessibilidade como veículo de inclusão social: proposta de dispositivo computacional para os deficientes visuais da cidade de Natal/RN

This study aims to propose a computing device mechanism which is capable to permit a tactile communication between individuals with visual impairment (blindness or low vision) through the Internet or through a local area network (LAN - Local Network Address). The work was developed under the research projects that currently are realized in the LAI (Laboratory of Integrated Accessibility) of the Federal University of Rio Grande do Norte. This way, the research was done in order to involve a prototype capable to recognize geometries by students considered blind from the Institute of Education and Rehabilitation of Blind of Rio Grande do Norte (IERC-RN), located in Alecrim neighborhood, Natal/RN. Besides this research, another prototype was developed to test the communication via a local network and Internet. To analyze the data, a qualitative and quantitative approach was used through simple statistical techniques, such as percentages and averages, to support subjective interpretations. The results offer an analysis of the extent to which the implementation can contribute to the socialization and learning of the visually impaired. Finally, some recommendations are suggested for the development of future researches in order to facilitate the proposed mechanism.

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Implementação de um algoritmo para a análise de curtos-circuitos de alta impedância baseado no fluxo de carga soma de potências

This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness

Contribuição para o estudo do embarque de uma rede neural artificial em field programmable gate array (FPGA)

This study shows the implementation and the embedding of an Artificial Neural Network (ANN) in hardware, or in a programmable device, as a field programmable gate array (FPGA). This work allowed the exploration of different implementations, described in VHDL, of multilayer perceptrons ANN. Due to the parallelism inherent to ANNs, there are disadvantages in software implementations due to the sequential nature of the Von Neumann architectures. As an alternative to this problem, there is a hardware implementation that allows to exploit all the parallelism implicit in this model. Currently, there is an increase in use of FPGAs as a platform to implement neural networks in hardware, exploiting the high processing power, low cost, ease of programming and ability to reconfigure the circuit, allowing the network to adapt to different applications. Given this context, the aim is to develop arrays of neural networks in hardware, a flexible architecture, in which it is possible to add or remove neurons, and mainly, modify the network topology, in order to enable a modular network of fixed-point arithmetic in a FPGA. Five synthesis of VHDL descriptions were produced: two for the neuron with one or two entrances, and three different architectures of ANN. The descriptions of the used architectures became very modular, easily allowing the increase or decrease of the number of neurons. As a result, some complete neural networks were implemented in FPGA, in fixed-point arithmetic, with a high-capacity parallel processing

Efeitos do thidiazuron e do ácido giberélico nas características dos cachos de uva de mesa cultivar Rubi, na região da Nova Alta Paulista

Com o objetivo de avaliar os efeitos de thidiazuron e de ácido giberélico nas características dos cachos de uvas 'Rubi', foi conduzido um experimento, utilizando-se de thidiazuron a 5 e 10 mg.L-1 e ácido giberélico a 20mg.L-1, combinados ou não. As aplicações dos produtos foram realizadas aos 14; 21 ou 28 dias após o pleno florescimento, por meio de imersão dos cachos. Todos os tratamentos com reguladores de crescimento aumentaram a massa dos cachos. A massa dos bagos e dos engaços foi identicamente influenciada pela aplicação dos produtos, porém menos evidente, quando as aplicações foram realizadas aos 28 dias após o pleno florescimento. As aplicações de thidiazuron a 5mg.L-1, aos 14 ou 21 dias após o florescimento, não diferiram das aplicações de ácido giberélico para as variáveis estudadas. Não houve diferenças significativas para as variáveis teor de sólidos solúveis totais, acidez titulável, porém os tratamentos com thidiazuron retardaram a maturação em até 7 dias.

Protótipo de uma unidade com tri-geração de energia para utilizações remotas: aplicação de módulo secondutivo gerador termoelétrico

The generation for termoeletricity is characterized as a solid process of conversion of thermal energy (heat) in electric without the necessity of mobile parts. Although the conversion process is of low efficiency the system presents high degree of trustworthiness and low requisite of maintenance and durability. Its principle is based on the studies of termogeneration carried through by Thomas Seebeck in 1800. The frank development of the technologies of solid state for termoeletricity generation, the necessity of the best exploitation of the energy, also with incentive the cogeneration processes, the reduction of the ambient impact allies to the development of modules semiconductors of high efficiency, converge to the use of the thermoeletric generation through components of solid state in remote applications. The work presents the development, construction and performance evaluation of an prototype, in pilot scale, for energy tri-generation aiming at application in remote areas. The unit is composed of a gas lamp as primary source of energy, a module commercial semiconductor for thermoelectric generation and a shirt for production of the luminosity. The project of the device made compatible a headstock for adaptation in the gas lamp, a hot source for adaptation of the module, an exchanger of to be used heat as cold source and to compose first stage of cogeneration, an exchanger of tubular heat to compose second stage of cogeneration, the elaboration of a converter dc-dc type push pull, adequacy of a system of acquisition of temperature. It was become fullfilled assembly of the prototype in group of benches for tests and assay in the full load condition in order to evaluate its efficiency, had been carried through energy balance of the unit. The prototype presented an electric efficiency of 0,73%, thermal of 56,55%, illumination of 1,35% and global of 58,62%. The developed prototype, as the adopted methodology of assay had also taken care of to the considered objectives, making possible the attainment of conclusive results concerning to the experiment. Optimization in the system of setting of the semicondutor module, improvement in the thermal insulation and design of the prototype and system of protection to the user are suggestions to become it a commercial product

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Desenvolvimento de um protótipo para alimentação de pós para aspersão térmica em tocha de plasma

The nanometric powders have special features that usually result in new properties, originating applications or expanding them in various fields of knowledge. Because having a high area/volume ratio, phenomena such as superficial strength of adsorption becomes greater than the weight of the powder which makes more difficult its handling. The high power of agglomeration of these powders requires study and development of equipments to enable its management into the plasma torch. The objective of this work is to develop a powder feeder which can solve the mainly problems about insertion of powder into the thermal spray developed in the laboratory of plasmas, which are carried out with plasma torch arc not transferred (plasma spray). Therefore, it was made a aluminum s powder feeder and tests were performed to verify their operation and determine its rate of deposition by spraying powders of niobium pentoxide (Nb2O5) and titanium dioxide (TiO2) with particle sizes less than 250 mesh (<0.063 mm). We used masses of 0.5 g - 1.0 g and 1.5 g of each powder in tests lasting 15 seconds - 20 to 25 seconds for each mass. The tests were performed in two ways: at atmospheric pressure using argon gas with a flow of 9 l / min as carrier gas and through a Venturi pipe also using argon gas with a flow of 9 l / min as carrier gas and with a flow of 20 l/min as the feed gas passing through the Venturi pipe. The powder feeder developed in this paper is very easy to be handling and building, resulting in feeding rate of 0.25 cm3/min - 1.37 cm3/min. The TiO2 showed higher feeding rates than the Nb2O5 in all tests, and the best rates were obtained with tests using mass 1.5 g and time of 15 seconds, reaching feeding rate of 1.37 cm3/min. The flow of feed had low interference in feeding rate during the tests