Interorganizational Innovation: The Role of Suppliers in Enhancing Buyer Innovation

This dissertation explores the effect of innovative knowledge transfer across supply chain partners. My research seeks to understand the manner by which a firm is able to benefit from the innovative capabilities of its supply chain partners and utilize the external knowledge they hold to increase its own levels of innovation. Specifically, I make use of patent data as a proxy for firm-level innovation and develop both independent and dependent variables from the data contained within the patent filings. I further examine the means by which key dyadic and portfolio supply chain relationship characteristics moderate the relationship between supplier innovation and buyer innovation. I investigate factors such as the degree of transactional reciprocity between the buyer and supplier, the similarity of the firms’ knowledge bases, and specific chain characteristics (e.g., geographic propinquity) to provide greater understanding of the means by which the transfer of innovative knowledge across firms in a supply chain can be enhanced or inhibited. This dissertation spans three essays to provide insights into the role that supply chain relationships play in affecting a focal firm’s level of innovation. While innovation has been at the core of a wide body of research, very little empirical work exists that considers the role of vertical buyer-supplier relationships on a firm’s ability to develop new and novel innovations. I begin by considering the fundamental unit of analysis within a supply chain, the buyer-supplier dyad. After developing initial insights based on the interactions between singular buyers and suppliers, essay two extends the analysis to consider the full spectrum of a buyer’s supply base by aggregating the individual buyer-supplier dyad level data into firm-supply network level data. Through this broader level of analysis, I am able to examine how the relational characteristics between a buyer firm and its supply base affect its ability to leverage the full portfolio of its suppliers’ innovative knowledge. Finally, in essay three I further extend the analysis to explore the means by which a buyer firm can use its suppliers to enhance its ability to access distant knowledge held by other organizations that the buyer is only connected to indirectly through its suppliers.

The antecedents of post-initial adoption behavior in a S-D logic context

Repercussions of innovation adoption and diffusion studies have long been imperative to the success of novel introductions. However, perceptions and deductions of current innovation understandings have been changing over time. The paradigm shift from the goods-dominant (G-D) logic to the service-dominant (S-D) logic potentially makes the distinction between product (goods) innovation and service innovation redundant as the S-D logic lens views all innovations as service innovations (Vargo and Lusch, 2004; 2008; Lusch and Nambisan, 2015). From this perspective, product innovations are in essence service innovations, as goods serve as mere distribution mechanisms to deliver service. Nonetheless, the transition to such a broadened and transcending view of service innovation necessitates concurrently a change in the underlying models used to investigate innovation and its subsequent adoption. The present research addresses this gap by engendering a novel model for the most crucial period of service diffusion within the S-D logic context – the post-initial adoption phase, which demarcates an individual’s behavior after the initial adoption decision of a service. As a wellfounded understanding of service diffusion and the complementary innovation adoption still lingers in its infancy, the current study develops a model based on interdisciplinary domains mapping. Here fore, knowledge of the relatively established viral source domain is mapped to the comparatively undetermined target domain of service innovation adoption. To assess the model and test the importance of the explanatory variables, survey data from 750 respondents of a bank in Northern Germany is scrutinized by means of Structural Equation Modeling (SEM). The findings reveal that the continuance intention of a customer, actual usage of the service and the customer influencer value all constitute important postinitial adoption behavior that have meaningful implications for a successful service adoption. Second, the four constructs customer influencer value, organizational commitment, perceived usefulness and service customization are evidenced to have a differential impact on a iv customer’s post-initial adoption behavior. Third, this study indicates that post-initial adoption behavior further underlies the influence of a user’s age and besides that is also provoked by the internal and external environments of service adoption. Finally, this research amalgamates the broad view of service innovation by Nambisan and Lusch (2015) with the findings ensuing this enquiry’s model to arrive at a framework that it both, generalizable and practically applicable. Implications for academia and practitioners are captured along with avenues for future research.

Is Spain Different? Innovation systems in the long-term development of the tourism sector. The IBEROSTAR case study.

Tourism is a highly competitive sector which is characterized by permanent transformation. Therefore, tourism firms depend largely on innovation to adapt themselves and compete, ensuring their survival and competitiveness. Despite research on innovation concludes that tourism firms are in most cases only moderately innovative, there are outstanding exceptions in specific fields and destinies. Spain, which is an unquestionable leader in tourism, constitutes one of them. In fact, Spanish tourism firms have shown a strong innovation capacity. They have improved and diversified their products thus meeting the requirements of a changing demand. This raises the need to properly understand how and why innovation takes place and who is involved in such a process. This paper aims to address these questions through the case study of one of the largest Spanish hospitality firms. The long history of Iberostar Group confirms that family firms and the networks they provide, along with environments that foster competition as was the case of the Spanish tourism industry, are important determinants of innovation particularly in a late-developed country.

Factors influencig software migration decision: case studies of acerlormittal Tubarão and the city government of Serra, Espirito Santo

The objective of this research is to identify the factors that influence the migration of free software to proprietary software, or vice-versa. The theoretical framework was developed in light of the Diffusion of Innovations Theory (DIT) proposed by Rogers (1976, 1995), and the Unified Theory of Acceptance and Use of Technology (UTAUT) proposed by Venkatesh, Morris, Davis and Davis (2003). The research was structured in two phases: the first phase was exploratory, characterized by adjustments of the revised theory to fit Brazilian reality and the identification of companies that could be the subject of investigation; and the second phase was qualitative, in which case studies were conducted at ArcelorMittal Tubarão (AMT), a private company that migrated from proprietary software (Unix) to free software (Linux), and the city government of Serra, in Espírito Santo state, a public organization that migrated from free software (OpenOffice) to proprietary (MS Office). The results show that software migration decision takes into account factors that go beyond issues involving technical or cost aspects, such as cultural barriers, user rejection and resistance to change. These results underscore the importance of social aspects, which can play a decisive role in the decision regarding software migration and its successful implementation.

Implantation d’une innovation au sein d’une région rurale éloignée au Québec : le rôle d’infirmière praticienne spécialisée en soins de première ligne- une étude de cas multiples

Introduction : La situation de l’accès, de la continuité et de la coordination des services de santé au Canada et au Québec est des plus préoccupantes. Pour contribuer à résoudre ces problématiques, l’élargissement des champs de pratique professionnels a été proposé. Lorsqu’il est question d’élargir le rôle des infirmières, la pratique infirmière avancée (PIA) est fréquemment abordée. Au Québec, ce n’est qu’en 2006 qu’un rôle associé à la PIA en première ligne a pu officiellement être mis en place, celui d’infirmière praticienne spécialisée en soins de première ligne (IPSPL) (Durand, Allard, & Ménard, 2006). L’implantation du rôle d’IPSPL est récente et peut être conçue comme une innovation. Les difficultés liées à l’implantation des rôles de PIA font l’objet d’un consensus. Pour pallier à ces difficultés, il est proposé d’approfondir la compréhension de la façon dont les rôles de PIA sont implantés, et ce, en considérant les contextes. Encore peu de recherches s’intéressent au processus d’implantation du rôle d’IPSPL au Québec, et aucune n’est centrée sur le contexte rural éloigné. But : Cette recherche vise à comprendre le processus d’implantation du rôle d’IPSPL au sein d’une région rurale éloignée du Québec, à travers l’éclairage d’un cadre de référence intégrant les théories de la diffusion de l’innovation et des transitions. Méthode : Cette étude de trois cas se situe dans un paradigme pragmatique, avec des visées descriptive et explicative. Des stratégies de collecte de données mixtes ont été utilisées auprès de personnes provenant du contexte québécois, de la région ciblée et des cas (IPSP, médecins partenaires, DSI, DSP, gestionnaires, personnes soignées et leur famille). Résultats : L’implantation est un processus multidimensionnel, multifactoriel et évolutif. Le contexte, le déroulement, la compréhension, les acteurs et le temps sont des parties intégrantes de l’implantation et sont étroitement inter-reliés. Le déroulement de l’implantation et des transitions se produit simultanément. Discussion : Cette recherche a permis de mettre en lumière la raison pour laquelle le processus d’implantation du rôle d’IPSPL doit être considéré comme un processus complexe. Cette thèse contribue à éclairer la recherche axée sur l’efficacité en permettant de mieux comprendre les différentes composantes de l’implantation. Mots-clés : implantation, rôle, infirmière praticienne, première ligne, rural, éloigné, innovation, transition.

Expression and distribution of connexin 32 in rat liver with experimentally induced fibrosis

The connexin 32 (Cx32) is a protein that forms the channels that promote the gap junction intercellular communication (GJIC) in the liver, allowing the diffusion of small molecules through cytosol from cell-to-cell. Hepatic fibrosis is characterized by a disruption of normal tissue architeture by cellular lesions, and may alter the GJIC. This work aimed to study the expression and distribution of Cx32 in liver fibrosis induced by the oral administration of dimethylnitrosamine in female Wistar rats. The necropsy of the rats was carried out after five weeks of drug administration. They presented a hepatic fibrosis state. Sections from livers with fibrosis and from control livers were submitted to immunohistochemical, Real Time-PCR and Western-Blot analysis to Cx32. In fibrotic livers the Cxs were diffusely scattered in the cytoplasm, contrasting with the control livers, where the Cx32 formed junction plaques at the cell membrane. Also it was found a decrease in the gene expression of Cx32 without reduction in the protein quantity when compared with controls. These results suggest that there the mechanism of intercellular communication between hepatocytes was reduced by the fibrotic process, which may predispose to the occurrence of a neoplastic process, taken in account that connexins are considered tumor suppressing genes.

A Paradigm Shift in Predoctoral Dental Curricula in Brazil: Evaluating the Process of Change

In 2002, the Brazilian Ministry of Education approved the official curricular guidelines for undergraduate courses in Brazil to be adopted by the nation's 188 dental schools. In 2005-06, the Brazilian Dental Education Association (BDEA) promoted workshops in forty-eight of the schools to verify the degree of transformation of the curriculum based on these guidelines. Among the areas analyzed were course philosophy (variables were v1: knowledge production based on the needs of the Brazilian Public Health System [BPHS]; v2: health determinants; and v3: postgraduate studies and permanent education); pedagogical skills (v4: curricular structure; v5: changes in pedagogic and didactic skills; and v6: course program orientation); and dental practice scenarios (v7: diversity of the scenarios for training/learning; v8: academic health care centers opened to the BPHS; and v9: participation of students in health care delivery for the population). The subjects consisted of faculty members (n=711), students (n=228), and employees (n=14). The results showed an incipient degree of curriculum transformation. The degree of innovation was statistically different depending on the type of university (public or private) for variables I, 2, 4, 5, 6, and 7. Private schools reported a higher level of innovation than public institutions. Resistance to transforming the dental curriculum according to the official guidelines may be linked to an ideological conception that supports the private practice model, continues to have faculty members direct all classroom activities, and prevents students from developing an understanding of professional practice as targeted towards the oral health needs of all segments of society.

Theory of small-signal ac response of a dielectric liquid containing two groups of ions

The analysis of Macdonald for electrolytes is generalized to the case in which two groups of ions are present. We assume that the electrolyte can be considered as a dispersion of ions in a dielectric liquid, and that the ionic recombination can be neglected. We present the differential equations governing the ionic redistribution when the liquid is subjected to an external electric field, describing the simultaneous diffusion of the two groups of ions in the presence of their own space charge fields. We investigate the influence of the ions on the impedance spectroscopy of an electrolytic cell. In the analysis, we assume that each group of ions have equal mobility, the electrodes perfectly block and that the adsorption phenomena can be neglected. In this framework, it is shown that the real part of the electrical impedance of the cell has a frequency dependence presenting two plateaux, related to a type of ambipolar and free diffusion coefficients. The importance of the considered problem on the ionic characterization performed by means of the impedance spectroscopy technique was discussed. (c) 2008 American Institute of Physics.

Substrate/semiconductor interface effects on the emission efficiency of luminescent polymers

The importance of interface effects for organic devices has long been recognized, but getting detailed knowledge of the extent of such effects remains a major challenge because of the difficulty in distinguishing from bulk effects. This paper addresses the interface effects on the emission efficiency of poly(p-phenylene vinylene) (PPV), by producing layer-by-layer (LBL) films of PPV alternated with dodecylbenzenesulfonate. Films with thickness varying from similar to 15 to 225 nm had the structural defects controlled empirically by converting the films at two temperatures, 110 and 230 degrees C, while the optical properties were characterized by using optical absorption, photoluminescence (PL), and photoluminescence excitation spectra. Blueshifts in the absorption and PL spectra for LBL films with less than 25 bilayers (<40-50 nm) pointed to a larger number of PPV segments with low conjugation degree, regardless of the conversion temperature. For these thin films, the mean free-path for diffusion of photoexcited carriers decreased, and energy transfer may have been hampered owing to the low mobility of the excited carriers. The emission efficiency was then found to depend on the concentration of structural defects, i.e., on the conversion temperature. For thick films with more than 25 bilayers, on the other hand, the PL signal did not depend on the PPV conversion temperature. We also checked that the interface effects were not caused by waveguiding properties of the excited light. Overall, the electronic states at the interface were more localized, and this applied to film thickness of up to 40-50 nm. Because this is a typical film thickness in devices, the implication from the findings here is that interface phenomena should be a primary concern for the design of any organic device. (C) 2011 American Institute of Physics. [doi:10.1063/1.3622143]

Biomimetic oxidative treatment of spruce wood studied by pyrolysis-molecular beam mass spectrometry coupled with multivariate analysis and (13)C-labeled tetramethylammonium hydroxide thermochemolysis: implications for fungal degradation of wood

In this work, pyrolysis-molecular beam mass spectrometry analysis coupled with principal components analysis and (13)C-labeled tetramethylammonium hydroxide thermochemolysis were used to study lignin oxidation, depolymerization, and demethylation of spruce wood treated by biomimetic oxidative systems. Neat Fenton and chelator-mediated Fenton reaction (CMFR) systems as well as cellulosic enzyme treatments were used to mimic the nonenzymatic process involved in wood brown-rot biodegradation. The results suggest that compared with enzymatic processes, Fenton-based treatment more readily opens the structure of the lignocellulosic matrix, freeing cellulose fibrils from the matrix. The results demonstrate that, under the current treatment conditions, Fenton and CMFR treatment cause limited demethoxylation of lignin in the insoluble wood residue. However, analysis of a water-extractable fraction revealed considerable soluble lignin residue structures that had undergone side chain oxidation as well as demethoxylation upon CMFR treatment. This research has implications for our understanding of nonenzymatic degradation of wood and the diffusion of CMFR agents in the wood cell wall during fungal degradation processes.

Photooxidative behavior of polystyrene-montmorillonite nanocomposites

The weathering behavior of polystyrene and polystyrene-montmorillonite composites containing 2.5, 5.0, and 7.5 wt% of montmorillonite (MMT) was investigated. Samples were exposed to UV radiation for periods of up to similar to 12 weeks and their molecular weight, chemical changes, and mechanical properties were monitored as a function of time. The addition of MMT was shown to improve the photostability of all composites investigated, probably because of a screen effect against UV radiation and barrier effect against diffusion of oxygen promoted by the silicate layers of MMT. Scanning electron microscopy of fracture surfaces of degraded samples showed that there is a degraded layer near the surface that provided a recovery of tensile strength of the samples.

Electrochemical and spectroscopic characterization of screen-printed gold-based electrodes modified with self-assembled monolayers and Tc85 protein

This work investigates the formation of self-assembled monolayers (SAMs) of cystamine and cystamine-glutaraldehyde on a screen-printed electrode, and the immobilization of the Tc85 protein (from Trypanosoma cruzi) on these monolayers. The methods used included infrared techniques, cyclic voltammetry, and electrochemical impedance spectroscopy. The electrochemical studies were performed at pH 6.9 in 0.1 mol L(-1) phosphate buffer solution containing Fe(CN)(6)(-3/-4) redox species. The surface coverage (0) of the electrode was 0.10 (cystamine), 0.35 (cystamine-glutaraldehyde) and 0.84 (Tc85). Interpretation of electrochemical impedance spectroscopy results was based on a charge-transfer reaction involving Fe(CN)(6)(-3/-4) species at high frequencies, followed by a diffusion through the monolayers at lower frequencies. Estimates of the electrode surface coverage, active site radius, and distance between two adjacent sites assumed that charge transfer occurred at the active sites, and that there was a planar diffusion of redox species to these sites. (C) 2009 Elsevier B.V. All rights reserved.

Biogenic modified silica as a sorbent of cadmium ions: Preparation and characterization

This work describes the preparation and characterization of biogenic modified silica from rice hull ash and its use as a sorbent of cadmium ions. Thus, an agro-industrial residue has been used to produce a new adsorbent product which is able to remove toxic elements. Mesoporous biogenic silica was obtained by alkaline extraction of sodium silicate by hydrolysis with the sol-gel process, and it was modified with salen using 1,2-dichloroethane as a spacer. The surface area of the silica was measured by nitrogen adsorption/desorption analysis. Surface modification was measured by Fourier transform infrared spectroscopy. The degree of functionalization was obtained by elemental analysis. This work showed that biogenic modified silica can be produced in aqueous media from rice hull ash using a simple method, providing an alternative method for adsorbent preparation. Thermogravimetric analysis showed that the salen-modified silica is stable up to 209 C. The modified silica displays appropriate structural characteristics for an adsorbent. The cylindrical pores, open at both ends, allow free diffusion of cadmium ions to the adsorption sites on the silica surface. The surface modification increases cadmium adsorption on the silica surface 100-fold. The salen-modified silica showed specific adsorption for Cd2+ of 44.52 mg/g SiO2 at cadmium concentration of 100 mg/l.

In Vitro Ultrasound Influence on Cutaneous Permeation of Hyaluronidase

In vitro skin permeation of hyaluronidase enzyme and the ultrasound (US) effects on cutaneous permeation of this enzyme were investigated. Diffusion cell technique, porcine skins, buffer solution, and a hydrophilic gel+hyaluronidase (100 TUR/g), were used for study. The experimental groups were: gel+enzyme and gel+enzyme+US. The activity of permeated hyaluronidase was determined by turbydimetric method in spectrophotometer at 400nm. Gel+enzyme group permitted a diffusion of 26.89 +/- 3.82 TUR of hyaluronidase in the total time of 240 minutes. However, the other group did not produce significant differences (p0.05) in the same period (13.68 +/- 5.35 TUR). Hyaluronidase permeation through the skin was verified; however US did not cause increase of this enzyme permeation.

Short-term spatial diffusion in sigma o+ o- optical molasses

We have measured the spatial diffusion of atoms in a three-dimensional sigma(+)-sigma(-) optical molasses over twenty milliseconds timescale, starting from the initial interaction of the atoms with the molasses. We find that the diffusion constants agree well with a linear model for these short time scales and also compare favourably to other studies of diffusion made over longer time scales. These measurements enable us to quantify the detection method known as freezing molasses. We discuss this method, for detecting and measuring the momentum distribution of cold atoms, which relies on the slow diffusion of atoms in optical molasses to produce a freeze-frame of the spatial distribution of the atoms. This method enables a longer interrogation interval, providing a greatly increased signal-to-noise ratio. (C) 1998 Elsevier Science B.V.