The problem with teamwork: A discursive investigation

- Background Teamwork sits comfortably within the vocabularies of most physical education teachers. It is used to both describe and prescribe student behaviour in a variety of physical and sport-related activities. Yet while supporters of sport and PE have readily employed the term, remarkably few pedagogues have taken the time to consider what teamwork refers to, let alone what it means to teach it. - Focus of study In this paper, we examine practitioners' constructions of teamwork. - Participants and setting Data were generated with seven physical education teachers (four male and three female) at a state-funded secondary school near Brisbane, Australia. The teachers ranged in experience from three months to more than 30 years. - Research design The investigation was a case study of one physical education department at a secondary school. - Data collection Three interviews were conducted with each of the teachers. The first was biographical in nature and covered themes such as education and sporting experiences. During the second interviews, teachers produced examples and statements on the topic of teamwork as it occurs within their lessons. The material from the second set of interviews was explored in the final set where the teachers were invited to elaborate on and explain comments from their previous interviews. - Analysis Data were considered from a discursive-constructionist perspective and attention was given to linguistic and grammatical features of the teachers' commentary as well as the cultural relevance of the utterances. The notion of ‘interpretive repertoires’ – essentially cultural explanations bounded by particular socio-linguistic features – provided the central unit of analysis. - Findings The teachers in the project made use of an array of discursive resources to make sense of teamwork. These constructions often bore little resemblance to one another or to existing theories of teamwork. In some cases, the teachers offered vague descriptions or drew on alternative concepts to make sense of teamwork. - Conclusions Without a certain level of agreement in their everyday usage, teachers' constructions of teamwork fail to be convincing or useful. We maintain that a more substantive conceptualisation of teamwork is needed in the field of sport pedagogy and offer suggestions on how this might be accomplished.

IASDR 2015 Interplay Exhibition 2-5 NOV 2015

It has been said that we are living in a golden age of innovation. New products, systems and services aimed to enable a better future, have emerged from novel interconnections between design and design research with science, technology and the arts. These intersections are now, more than ever, catalysts that enrich daily activities for health and safety, education, personal computing, entertainment and sustainability, to name a few. Interactive functions made possible by new materials, technology, and emerging manufacturing solutions demonstrate an ongoing interplay between cross-disciplinary knowledge and research. Such interactive interplay bring up questions concerning: (i) how art and design provide a focus for developing design solutions and research in technology; (ii) how theories emerging from the interactions of cross-disciplinary knowledge inform both the practice and research of design and (iii) how research and design work together in a mutually beneficial way. The IASDR2015 INTERPLAY EXHIBITION provides some examples of these interconnections of design research with science, technology and the arts. This is done through the presentation of objects, artefacts and demonstrations that are contextualised into everyday activities across various areas including health, education, safety, furniture, fashion and wearable design. The exhibits provide a setting to explore the various ways in which design research interacts across discipline knowledge and approaches to stimulate innovation. In education, Designing South African Children’s Health Education as Generative Play (A Bennett, F Cassim, M van der Merwe, K van Zijil, and M Ribbens) presents a set of toolkits that resulted from design research entailing generative play. The toolkits are systems that engender pleasure and responsibility, and are aimed at cultivating South African’s youth awareness of nutrition, hygiene, disease awareness and prevention, and social health. In safety, AVAnav: Avalanche Rescue Helmet (Jason Germany) delivers an interactive system as a tool to contribute to reduce the time to locate buried avalanche victims. Helmet-mounted this system responds to the contextual needs of rescuers and has since led to further design research on the interface design of rescuing devices. In apparel design and manufacturing, Shrinking Violets: Fashion design for disassembly (Alice Payne) proposes a design for disassembly through the use of beautiful reversible mono-material garments that interactively responds to the challenges of garment construction in the fashion industry, capturing the metaphor for the interplay between technology and craft in the fashion manufacturing industry. Harvest: A biotextile future (Dean Brough and Alice Payne), explores the interplay of biotechnology, materiality and textile design in the creation of sustainable, biodegradable vegan textile through the process of a symbiotic culture of bacteria and yeast (SCOBY). SCOBY is a pellicle curd that can be harvested, machine washed, dried and cut into a variety of designs and texture combinations. The exploration of smart materials, wearable design and micro-electronics led to creative and aesthetically coherent stimulus-reactive jewellery; Symbiotic Microcosms: Crafting Digital Interaction (K Vones). This creation aims to bridge the gap between craft practitioner and scientific discovery, proposing a move towards the notion of a post-human body, where wearable design is seen as potential ground for new human-computer interactions, affording the development of visually engaging multifunctional enhancements. In furniture design, Smart Assistive chair for older adults (Chao Zhao) demonstrates how cross-disciplinary knowledge interacting with design strategies provide solution that employed new technological developments in older aged care, and the participation of multiple stakeholders: designers, health care system and community based health systems. In health, Molecular diagnosis system for newborns deafness genetic screening (Chao Zhao) presents an ambitious and complex project that includes a medical device aimed at resolving a number of challenges: technical feasibility for city and rural contexts, compatibility with standard laboratory and hospital systems, access to health system, and support the work of different hospital specialists. The interplay between cross-disciplines is evident in this work, demonstrating how design research moves forward through technology developments. These works exemplify the intersection between domains as a means to innovation. Novel design problems are identified as design intersects with the various areas. Research informs this process, and in different ways. We see the background investigation into the contextualising domain (e.g. on-snow studies, garment recycling, South African health concerns, the post human body) to identify gaps in the area and design criteria; the technologies and materials reviews (e.g. AR, biotextiles) to offer plausible technical means to solve these, as well as design criteria. Theoretical reviews can also inform the design (e.g. play, flow). These work together to equip the design practitioner with a robust set of ‘tools’ for design innovation – tools that are based in research. The process identifies innovative opportunity and criteria for design and this, in turn, provides a means for evaluating the success of the design outcomes. Such an approach has the potential to come full circle between research and design – where the design can function as an exemplar, evidencing how the research-articulated problems can be solved. Core to this, however, is the evaluation of the design outcome itself and identifying knowledge outcomes. In some cases, this is fairly straightforward that is, easily measurable. For example the efficacy of Jason Germany’s helmet can be determined by measuring the reduced response time in the rescuer. Similarly the improved ability to recycle Payne’s panel garments can be clearly determined by comparing it to those recycling processes (and her identified criteria of separating textile elements!); while the sustainability and durability of the Brough & Payne’s biotextile can be assessed by documenting the growth and decay processes, or comparative strength studies. There are however situations where knowledge outcomes and insights are not so easily determined. Many of the works here are open-ended in their nature, as they emphasise the holistic experience of one or more designs, in context: “the end result of the art activity that provides the health benefit or outcome but rather, the value lies in the delivery and experience of the activity” (Bennet et al.) Similarly, reconfiguring layers of laser cut silk in Payne’s Shrinking Violets constitutes a customisable, creative process of clothing oneself since it “could be layered to create multiple visual effects”. Symbiotic Microcosms also has room for facilitating experience, as the work is described to facilitate “serendipitous discovery”. These examples show the diverse emphasis of enquiry as on the experience versus the product. Open-ended experiences are ambiguous, multifaceted and differ from person to person and moment to moment (Eco 1962). Determining the success is not always clear or immediately discernible; it may also not be the most useful question to ask. Rather, research that seeks to understand the nature of the experience afforded by the artefact is most useful in these situations. It can inform the design practitioner by helping them with subsequent re-design as well as potentially being generalizable to other designers and design contexts. Bennett et. al exemplify how this may be approached from a theoretical perspective. This work is concerned with facilitating engaging experiences to educate and, ultimately impact on that community. The research is concerned with the nature of that experience as well, and in order to do so the authors have employed theoretical lenses – here these are of flow, pleasure, play. An alternative or complementary approach to using theory, is using qualitative studies such as interviews with users to ask them about what they experienced? Here the user insights become evidence for generalising across, potentially revealing insight into relevant concerns – such as the range of possible ‘playful’ or experiences that may be afforded, or the situation that preceded a ‘serendipitous discovery’. As shown, IASDR2015 INTERPLAY EXHIBITION provides a platform for exploration, discussion and interrogation around the interplay of design research across diverse domains. We look forward with excitement as IASDR continues to bring research and design together, and as our communities of practitioners continue to push the envelope of what is design and how this can be expanded and better understood with research to foster new work and ultimately, stimulate innovation.

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.

Paimen vailla hiippakuntaa : Kenttäpiispan viran synty ja vaikutus sotilaspapiston asemaan Suomen puolustusvoimissa ja kirkossa vuosina 1939 - 1944

The main purpose of this research is to shed light on the factors that gave rise to the office of Field Bishop in the years 1939-1944. How did military bishophood affect the status of the head of military pastoral care and military clergy during these years? The main sources of my research are the collections in the Finnish National Archives, and I use a historical-qualitative method. The position of the military clergy was debated within both the Church and the Defence Forces before 1939. At that stage, Church law did not yet recognize the office of the leading military priest, the Field Dean. There had been a motion in 1932 to introduce the office of a military bishop, but the bishops' synod blocked it. The concept of Field Bishop appeared for the first time in 1927 in a Finnish military document, which dealt with pastoral care in the Polish military. The Field Dean in Finland had regularly proposed improvements to the salary of the military clergy before the Winter War. After the Winter War, arguments were made for strengthening the position of the military clergy: these arguments were based on the increased respect shown towards this clergy, especially due to their role in the care of the fallen, which had become their task during the war. Younger members of the military clergy in particular supported the demands to improve their position within the Church and the army. The creation of a Field Bishop was perceived as strengthening the whole military clergy, as the Field Bishop was envisioned as a bishop within the Church and a general within the Defence Forces. During that time the Field Dean was still without any military rank. The idea of a Field Bishop was recommended to Mannerheim in June 1940, after which the Defence Forces lent their support to the cause. The status of the military clergy, in Church law, made it to the agenda of the Church council in January 1941, thanks largely to the younger priests' group influence and Mannerheim's leverage. The bishops opposed the notion of a Field Bishop mostly on theological grounds but were ready to concede that the position the Field Dean in Church law required further defining. The creation of the office of Field Bishop was blocked in the Church law committee report issued close to the beginning of the Continuation War. The onset of that war, however, changed the course of events, as the President of the Republic appointed Field Dean Johannes Björklund as Field Bishop. Speculation has abounded about Mannerheim's role in the appointment, but the truth of the matter is not clear. The title of Field Bishop was used to put pressure on the Church, and, at the same time, Mannerheim could remain detached from the matter. Later, in September 1941, the Church council approved the use of the Field Bishop title to denote the head of military pastoral care in Church law, and Field Bishops were assigned some of the duties formerly pertaining to bishops. Despite all expectations and hopes, the new office of Field Bishop did not affect the status of the military clergy within the Defence Forces, as no ranks were established for them, and their salary did not improve. However the office of the Field Bishop within Army HQ was transformed from a bureau into a department in the summer of 1942. At the beginning of the Continuation War, the Field Bishop was criticized by certain military and Church clergy for favouring Russian Orthodox Christians in Eastern Karelia. Björklund agreed in principle with most of the Lutheran clergy on the necessity of Lutheranizing East Karelia but had to take into account the realities at Army HQ. As well, at the same time the majority of the younger clergy were serving in the army, and there was a lack of parish priests on the home front. Bishop Lehtonen had actually expressed the wish that more priests could have been released from the front to serve in local parishes. In his notes Lehtonen accused Björklund of trying to achieve the position of Field Bishop by all possible means. However, research has revealed a varied group of people behind the creation of the office of Field Bishop, including in particular younger clergy and the Defence Forces.

Isolation and characterization of heat-stable allergens from shrimp (Penaeus indicus)

Shrimp are among the more common causes of immediate hypersensitivity reactions to food. To characterize better the allergenic substances within shrimp, extracts from heated shrimp were systematically examined with solid-phase radioimmunoassay and sera from patients clinically sensitive to shrimp. Two heat-stable protein allergens, designated as Sa-I and Sa-II, were identified from boiled shrimp (Penaeus indicus) extracts. Sa-I was isolated by ultrafiltration, Sephadex G-25, and diethylaminoethyl-Sephacel chromatography, whereas Sa-II, the major allergen, was purified by successive chromatography on diethylaminoethyl-Sephacel, Bio-Gel P-200, and Sepharose 4B columns. Sa-I, which was homogeneous by polyacrylamide gel electrophoresis (PAGE), elicited a single band on sodium dodecyl sulfate-PAGE corresponding to a molecular weight of 8.2 kd. Sa-II was also found to be homogeneous by PAGE, crossed immunoelectrophoresis, and immunoblotting. On sodium dodecyl sulfate-PAGE, it elicited a single band with a molecular weight of 34 kd. Sa-II was found to contain 301 amino acid residues and was particularly rich in glutamate/glutamine and aspartate/asparagine. Solid-phase radioimmunoassay-inhibition studies revealed that Sa-I and Sa-II share 54% of the allergenic epitopes, suggesting that Sa-I may be a fragment of Sa-II.SDS-PAGE, Sodium dodecyl sulfate-polyacrylamide gel electrophoresis; MW, Molecular weight; BSA, Bovine serum albumin; DEAE, Diethylaminoethyl; SPRIA, Solid-phase radioimmunoassay; CIE, Crossed immunoelectrophoresis .

Governmental rationalities and the local dimension of European politics. A study of the Interreg IV programme "Alpenrhein-Bodensee-Hochrhein"

The thesis aims at investigating the local dimension of the EU cohesion policy through the utilization of an alternative approach, which aims at the analysis of discourse and structures of power. The concrete case under analysis is the Interreg IV programme “Alpenrhein-Bodensee-Hochrhein”, which is conducted in the border region between Germany, Switzerland, Austria and the principality of Liechtenstein. The main research question is stated as such: What governmental rationalities can be found at work in the field of EU cross-border cooperation programmes? How is directive action and cooperation envisioned? How coherent are the different rationalities, which are found at work? The theoretical framework is based on a Foucaultian understanding of power and discourse and utilizes the notion of governmentalities as a way to de-stabilize the understanding of directive action and in order to highlight the dispersed and heterogeneous nature of governmental activity. The approach is situated within the general field of research on the European Union connected to basic conceptualisations such as the nature of power, the role of discourse and modes of subjectification. An approach termed “analytics of government”, based on the work of researchers like Mitchell Dean is introduced as the basic framework for the analysis. Four dimensions (visiblities, subjectivities, techniques/practices, problematisations) are presented as a set of tools with which governmental regimes of practices can be analysed. The empirical part of the thesis starts out with a discussion of the general framework of the European Union's cohesion policy and places the Interreg IV Alpenrhein-Bodensee-Hochrhein programme in this general context. The main analysis is based on eleven interviews which were conducted with different individuals, participating in the programme on different levels. The selection of interview partners aimed at maximising heterogeneity through including individuals from all parts of the programme region, obtaining different functions within the programme. The analysis reveals interesting aspects pertaining to the implementation and routine aspects of work within initiatives conducted under the heading of the EU cohesion policy. The central aspects of an Interreg IV Alpenrhein-Bodensee-Hochrhein – governmentality are sketched out. This includes a positive perception of the work atmosphere, administrative/professional characterisation of the selves and a de-politicization of the programme. Characteristic is the experience of tensions by interview partners and the use of discoursive strategies to resolve them. Negative perceptions play an important role for the specific governmental rationality. The thesis contributes to a better understanding of the local dimension of the European Union cohesion policy and questions established ways of thinking about governmental activity. It provides an insight into the working of power mechanisms in the constitution of fields of discourse and points out matters of practical importance as well as subsequent research questions.

Identification of tropomyosin as the major shrimp allergen and characterization of its IgE-binding epitopes

The major heat-stable shrimp allergen (designated as Sa-II), capable of provoking IgE-mediated immediate type hypersensitivity reactions after the ingestion of cooked shrimp, has been shown to be a 34-kDa heat- stable protein containing 300 amino acid residues. Here, we report that a comparison of amino acid sequences of different peptides generated by proteolysis of Sa-II revealed an 86% homology with tropomyosin from Drosophila melanogaster, suggesting that Sa-II could be the shrimp muscle protein tropomyosin. To establish that Sa-II is indeed tropomyosin, the latter was isolated from uncooked shrimp (Penaeus indicus) and its physicochemical and immunochemical properties were compared with those of Sa-II. Both tropomyosin and Sa-II had the same molecular mass and focused in the isoelectric pH range of 4.8 to 5.4. In the presence of 6 M urea, the mobility of both Sa-II and shrimp tropomyosin shifted to give an apparent molecular mass of 50 kDa, which is a characteristic property of tropomyosins. Shrimp tropomyosin bound to specific IgE antibodies in the sera of shrimp-sensitive patients as assessed by competitive ELISA inhibition and Western blot analysis. Tryptic maps of both Sa-II and tropomyosin as obtained by reverse phase HPLC were superimposable. Dot-blot and competitive ELISA inhibition using sera of shrimp-sensitive patients revealed that antigenic as well as allergenic activities were associated with two peptide fractions. These IgE-binding tryptic peptides were purified and sequenced. Mouse anti-anti-idiotypic antibodies raised against Sa-II specific human idiotypic antibodies recognized not only tropomyosin but also the two allergenic peptides, thus suggesting that these peptides represent the major IgE binding epitopes of tropomyosin. A comparison of the amino acid sequence of shrimp tropomyosin in the region of IgE binding epitopes (residues 50-66 and 153-161) with the corresponding regions of tropomyosins from different vertebrates confirmed lack of allergenic cross-reactivity between tropomyosins from phylogenetically distinct species.

The use of murine polyclonal anti-idiotypic antibodies as surrogate allergens in the diagnosis of Parthenium hypersensitivity

Background: Anti-idiotypic antibodies (Ab-2), which are the mirror images of idiotypic antibodies (Ab-1), may be useful as diagnostic reagents and for use as immunogen to induce antigen-specific immune responses. Methods and Results: To explore the biologic potential of Ab-2 as diagnostic reagents in allergic diseases, murine mouse (m) Ab-2 were raised by immunizing Balb/c mice with affinity purified rabbit (r) Ab-1 specific for the pollen of Parthenium hysterophorus, an allergenic weed that grows wild on the Indian subcontinent and in Australia, Mexico, and the southern United States. Affinity purified Parthenium-specific human (h)AB-1 could successfully inhibit the binding of mAb-2 to immobilized rAb-1. Further, Balb/c mice immunized with mAb-2 induced Parthenium-specific anti-anti-idiotypic IgE and IgG antibodies. Specificity of the Ab-2 was confirmed by the ability of Parthenium pollen extracts to inhibit the binding of allergen-specific IgE and IgG Ab-1 in the sera of patients with rhinitis to immobilized mAb-2. Parthenium-sensitive patients with rhinitis who had positive results on skin prick tests to Parthenium pollen extracts also responded with a positive skin reaction to mAb-2. Conclusion: Our data demonstrate that Parthenium-specific mAb-2 may be of value as surrogate allergens in allergen standardization and for in vitro diagnosis.

Robust Observer Design with Application to Fault Detection

A new scheme for robust estimation of the partial state of linear time-invariant multivariable systems is presented, and it is shown how this may be used for the detection of sensor faults in such systems. We consider an observer to be robust if it generates a faithful estimate of the plant state in the face of modelling uncertainty or plant perturbations. Using the Stable Factorization approach we formulate the problem of optimal robust observer design by minimizing an appropriate norm on the estimation error. A logical candidate is the 2-norm, corresponding to an H�¿ optimization problem, for which solutions are readily available. In the special case of a stable plant, the optimal fault diagnosis scheme reduces to an internal model control architecture.

Characterisation of cell adhesion to substrate materials and the resistance to enzymatic and mechanical cell-removal

Cell-implant adhesive strength is important for prostheses. In this paper, an investigation is described into the adhesion of bovine chondrocytes to Ti6Al4V-based substrates with different surface roughnesses and compositions. Cells were cultured for 2 or 5 days, to promote adhesion. The ease of cell removal was characterised, using both biochemical (trypsin) and mechanical (accelerated buoyancy and liquid flow) methods. Computational fluid dynamics (CFD) modelling has been used to estimate the shear forces applied to the cells by the liquid flow. A comparison is presented between the ease of cell detachment indicated using these methods, for the three surfaces investigated. © 2008 Materials Research Society.

Stainless steel sandwich

The Cambridge University's Gordon Laboratory, in collaboration with Fibertech and the Defence Science and Technology Laboratory in the UK, has developed a novel melt spun fiber bore called 'Fibrecore', fabricated entirely from stainless steel with thin faceplates. Fibrecore is typically manufactured by 5mm-long and 70μm thick stainless steel fibers, produced by a melt overflow process. Its entirely metallic construction allows spot welding and tungsten inert gas welding without difficulty. Fibrecore exhibits different energy absorption mechanisms such as core cushioning, core-faceplate delamination, and plastic faceplate deformation, often in a concertina-like fashion. Its low-cost, high structural efficiency and good energy absorption characteristics make it attractive for a range of commercial and military applications. Such applications being evaluated include vehicle body panels, exhaust system noise reduction, low cost filters, and lightweight physical protection. In addition to these characteristics, Fibrecore exhibits properties such as corrosion protection, vibrational damping, and thermal insulation, which also extend its applications.

The fracture energy of metal fibre reinforced ceramic composites (MFCs)

A model is presented for prediction of the fracture energy of ceramic-matrix composites containing dispersed metallic fibres. It is assumed that the work of fracture comes entirely from pull-out and/or plastic deformation of fibres bridging the crack plane. Comparisons are presented between these predictions and experimental measurements made on a commercially-available composite material of this type, containing stainless steel (304) fibres in a matrix predominantly comprising alumina and alumino-silicate phases. Good agreement is observed, and it's noted that there is scope for the fracture energy levels to be high (~20kJm-2). Higher toughness levels are both predicted and observed for coarser fibres, up to a practical limit for the fibre diameter of the order of 0.5mm. Other deductions are also made concerning strategies for optimisation of the toughness of this type of material. © 2010 Elsevier Ltd.

Asymptotic behaviour of approximate Bayesian estimators

Although approximate Bayesian computation (ABC) has become a popular technique for performing parameter estimation when the likelihood functions are analytically intractable there has not as yet been a complete investigation of the theoretical properties of the resulting estimators. In this paper we give a theoretical analysis of the asymptotic properties of ABC based parameter estimators for hidden Markov models and show that ABC based estimators satisfy asymptotically biased versions of the standard results in the statistical literature.