940 resultados para DRIED MICROSPHERES
Resumo:
The aim of this work was to evaluate the utility of ELISA-based testing of total IgG (IgGt) antibodies and its subclasses (IgG1, IgG2, IgG3 and IgG4) against soluble (STAg) and recombinant (rSAG1 and rMIC3) antigens of Toxoplasma gondii for diagnosing congenital toxoplasmosis. Sera from 217 newborns initially testing positive for specific IgM in filter paper dried blood spots were tested for specific IgM and IgG by ELFA-VIDAS®. Congenital toxoplasmosis was confirmed in 175 and ruled out in 42 infants. The validity of the ELISA tests was determined using the persistence of IgG antibodies (ELFA-VIDAS® kit) at the end of 12 months, which is considered the reference test for the diagnosis of congenital toxoplasmosis. The frequency of positivity with IgGt against STAg, rSAG1 and rMIC3 was found in 97.2%, 96.3% and 80.2%, respectively, of the newborns with confirmed congenital toxoplasmosis. IgG1 reacted with all three antigens, while IgG3 and IgG4 reacted preferentially with rMIC3. Higher mean values of reactivity (sample optical density/cut-off) were found for all subclasses when using rMIC3. All of the antigens showed high sensitivity and low specificity in detecting anti-T. gondii IgGt and IgG1 and low sensitivity and high specificity in detecting IgG3 and IgG4. In conclusion, the combined detection of IgG antibody subclasses against recombinant toxoplasmic antigens may be useful for the early diagnosis of congenital toxoplasmosis.
Resumo:
Age-related seroprevalence studies that have been conducted in Brazil have indicated a transition from a high to a medium endemicity of hepatitis A virus (HAV) infection in the population. However, most of these studies have focused on urban populations that experience lower incidence rates of HAV infection. In the current study, the prevalence of anti-HAV antibodies was investigated in children with a low socioeconomic status (SES) that live on the periphery of three capital cities in Brazil. A total of 1,162 dried blood spot samples were collected from individuals whose ages ranged from one-18 years and tested for anti-HAV antibodies. A large number of children under five years old (74.1-90%) were identified to be susceptible to HAV infection. The anti-HAV antibody prevalence reached ≥ 50% among those that were 10-14 years of age or older. The anti-HAV prevalence rates observed were characteristics of regions with intermediate level of hepatitis A endemicity. These data indicated that a large proportion of children with a low SES that live at the periphery of urban cities might be at risk of contracting an HAV infection. The hepatitis A vaccine that is currently offered in Brazil is only available for high-risk groups or at private clinics and is unaffordable for individuals with a lower SES. The results from this study suggest that the hepatitis A vaccine should be included in the Brazilian National Program for Immunisation.
Resumo:
X-ray is a technology that is used for numerous applications in the medical field. The process of X-ray projection gives a 2-dimension (2D) grey-level texture from a 3- dimension (3D) object. Until now no clear demonstration or correlation has positioned the 2D texture analysis as a valid indirect evaluation of the 3D microarchitecture. TBS is a new texture parameter based on the measure of the experimental variogram. TBS evaluates the variation between 2D image grey-levels. The aim of this study was to evaluate existing correlations between 3D bone microarchitecture parameters - evaluated from μCT reconstructions - and the TBS value, calculated on 2D projected images. 30 dried human cadaveric vertebrae were acquired on a micro-scanner (eXplorer Locus, GE) at isotropic resolution of 93 μm. 3D vertebral body models were used. The following 3D microarchitecture parameters were used: Bone volume fraction (BV/TV), Trabecular thickness (TbTh), trabecular space (TbSp), trabecular number (TbN) and connectivity density (ConnD). 3D/2D projections has been done by taking into account the Beer-Lambert Law at X-ray energy of 50, 100, 150 KeV. TBS was assessed on 2D projected images. Correlations between TBS and the 3D microarchitecture parameters were evaluated using a linear regression analysis. Paired T-test is used to assess the X-ray energy effects on TBS. Multiple linear regressions (backward) were used to evaluate relationships between TBS and 3D microarchitecture parameters using a bootstrap process. BV/TV of the sample ranged from 18.5 to 37.6% with an average value at 28.8%. Correlations' analysis showedthat TBSwere strongly correlatedwith ConnD(0.856≤r≤0.862; p<0.001),with TbN (0.805≤r≤0.810; p<0.001) and negatively with TbSp (−0.714≤r≤−0.726; p<0.001), regardless X-ray energy. Results show that lower TBS values are related to "degraded" microarchitecture, with low ConnD, low TbN and a high TbSp. The opposite is also true. X-ray energy has no effect onTBS neither on the correlations betweenTBS and the 3Dmicroarchitecture parameters. In this study, we demonstrated that TBS was significantly correlated with 3D microarchitecture parameters ConnD and TbN, and negatively with TbSp, no matter what X-ray energy has been used. This article is part of a Special Issue entitled ECTS 2011. Disclosure of interest: None declared.
Resumo:
El objetivo de este proyecto ha sido analizar los posibles efectos del biochar obtenido de restos de biomasa de resinosas, de caducifolios y de un lodo de depuradora por tres procedimientos de pirolisis (lenta, rápida y gasificación), sobre un suelo (Haploxerept típico) y una planta de interés agrícola (Hordeum vulgare). Adicionalmente, se han comparado los efectos del biochar con los producidos por la aplicación de los materiales originales, y la interacción del biochar sobre el fertilizante mineral incorporado al suelo. Por último, se ha completado el trabajo con la observación de la influencia del biochar en la formación de micorrizas. Para llevar a cabo este estudio se ha realizado un ensayo en invernadero y diferentes análisis en laboratorio que han permitido el estudio comparativo de la germinación y crecimiento de la cebada, y de diferentes parámetros fisicoquímicos del suelo que podrían explicar la respuesta de las plantas crecidas sobre los distintos tipos de biochar. A partir de la interpretación de los resultados se ha determinado que los diferentes tipos de biochar han provocado un mayor desarrollo de la cebada en comparación con la aplicación de sus respectivas materias primas, o bien se ha observado la desaparición de efectos inhibidores como en el caso de los lodos de depuradora. Por otro lado, ha destacado el biochar obtenido por pirólisis lenta del resto de los biochars puesto que se ha observado menor mineralización de su materia orgánica de los suelos y mayor eficiencia en el desarrollo de las plantas. Por último, el efecto de la enmienda orgánica en forma de biochar sobre el desarrollo de las plantas ha sido menor que el efecto provocado directamente por la fertilización mineral.
Resumo:
Early Cretaceous life and the environment were strongly influenced by the accelerated break up of Pangaea, which was associated with the formation of a multitude of rift basins, intensified spreading, and important volcanic activity on land and in the sea. These processes likely interacted with greenhouse conditions, and Early Cretaceous climate oscillated between "normal" greenhouse, predominantly arid conditions, and intensified greenhouse, predominantly humid conditions. Arid conditions were important during the latest Jurassic and early Berriasian, the late Barremian, and partly also during the late Aptian. Humid conditions were particularly intense and widespread during shorter episodes of environmental change (EECs): the Valanginian Weissert, the latest Hauterivian Faraoni, the latest Barremian earliest Aptian Taxy, the early Aptian Selli, the early late Aptian Fallot and the late Aptian-early Albian Paquier episodes. Arid conditions were associated with evaporation, low biogeochemical weathering rates, low nutrient fluxes, and partly stratified oceans, leading to oxygen depletion and enhanced preservation of laminated, organic-rich mud (LOM). Humid conditions enabled elevated biogeochemical weathering rates and nutrient fluxes, important runoff and the buildup of freshwater lids in proximal basins, intensified oceanic and atmospheric circulation, widespread upwelling and phosphogenesis, important primary productivity and enhanced preservation of LOM in expanded oxygen-minimum zones. The transition of arid to humid climates may have been associated with the net transfer of water to the continent owing to the infill of dried-out groundwater reservoirs in internally drained inland basins. This resulted in shorter-term sea-level fall, which was followed by sea-level rise. These sea-level changes and the influx of freshwater into the ocean may have influenced oxygen-isotope signatures. Climate change preceding and during the Early Cretaceous EECs may have been rapid, but in general, the EECs had a "pre"-history, during which the stage was set for environmental change. Negative feedback on the climate through increased marine LOM preservation was unlikely, because of the low overall organic-carbon accumulation rates during these episodes. Life and climate co-evolved during the Early Cretaceous. Arid conditions may have affected continental life, such as across the Tithonian/Berriasian boundary. Humid conditions and the corresponding tendency to develop dys- to anaerobic conditions in deeper ocean waters led to phases of accelerated extinction in oceans, but may have led to more luxuriant vegetation cover on continents, such as during the Valanginian, to the benefit of herbivores. During Early Cretaceous EECs, reef systems and carbonate platforms in general were particularly vulnerable. They were the first to disappear and the last to recover, often only after several million years. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
Els subproductes de l’ou, es presenten com a una alternativa viable a l’SDPP (Spray Dried Porcine Plasma),principalment per l’elevada qualitat de la seva proteïna, alhora que representen una fontimportant d’energia i agents antimicrobians, així com de vitamines i minerals. A més,el cost que suposa la seva inclusió en alimentació garrina és inferior al del plasma i coma element afegit, es donaria sortida a les elevades quantitats de subproductes de l’ougenerades cada any, no aptes per al consum humà
Resumo:
Neurons projecting transitorily into the corpus callosum from area 17 of the cat were retrogradely labeled by the fluorescent tracer Fast Blue (FB) injected into contralateral areas 17 and 18 on postnatal days 1-5. During the second postnatal month these neurons were still labeled by the early injection, although they had eliminated their callosal axon. At this time, 15-20% of these neurons could be retrogradely relabeled by injections of Diamidino Yellow (DY) into ipsilateral areas 17 and 18, but few or none by similar injections in the other areas that receive from area 17 (19, 21a, PMLS, 20a, 20b, DLS). Similarly, area 17 neurons projecting transitorily to contralateral area PMLS during the first postnatal week could be relabeled by DY injections in ipsilateral areas 17 and 18 but not in PMLS. Already around birth, many transitorily callosal neurons in area 17 send bifurcating axons both to contralateral areas 17 and 18 and ipsilateral area 18. It is probable that during postnatal development some of these neurons selectively eliminate their callosal axon collaterals and maintain the projection to ipsilateral area 18. In fact, some transitorily callosal neurons in area 17 can be double-labeled by simultaneous perinatal injections of FB in contralateral areas 17 and 18 and of a new long-lasting retrograde tracer, rhodamine-conjugated latex microspheres, in ipsilateral area 18. The same neurons can then be relabeled by reinjecting ipsilateral area 18 with DY during the second postnatal month. This finding, however, does not exclude the possibility that some transitorily callosal neurons send an axon to ipsilateral area 18 after eliminating their callosal axon. In conclusion, area 17 neurons that project transitorily through the corpus callosum later participate, probably permanently, in ipsilateral corticocortical projections but selectively to areas 17-18. The mechanism responsible for this selectivity is unknown, but it may be related to the differential radial distribution (i.e., to birth date) of area 17 neurons engaged in the various corticocortical projections. The problems raised by the use of long-lasting retrograde fluorescent tracers in neurodevelopmental studies and by the quantification of results of double- and triple-labeling paradigms are also discussed.
Resumo:
De acuerdo con los objetivos generales del proyecto y plan de trabajo previsto, para esta anualidad, se obtuvieron fibras y microfibras de celulosa a partir de dos fuentes: celulosa vegetal de pino y eucalipto y celulosa bacterial. Las microfibrillas han sido utilizadas como material de refuerzo para la fabricación de materiales compuestos a partir de caucho natural, policaprolactona y polivinil alcohol. Las muestras se fabricaron mediante la técnica de "casting" en medio acuoso y temperatura ambiente. Las muestras fueron caracterizados en sus propiedades mecánicas, físicas y térmicas. Se observó que, en general, la adición de las microfibrillas de celulosa en las matrices poliméricas provoca una mejora sustancial en las propiedades mecánicas del material en comparación con el polímero sin reforzar. Los resultados pueden resumirse de la siguiente manera: 1.Fabricación de materiales compuestos a base de caucho natural y fibras de celulosa. Se obtuvieron fibras y nanofibras de celulosa que fueron modificadas químicamente y usadas como refuerzo en matriz de caucho. Los resultados mostraron mejora de propiedades mecánicas del material, principalmente en los materiales compuestos reforzados con nanofibras. 2. Obtención de whiskers de celulosa y su utilización como material de refuerzo en una matriz de policaprolactona. Se obtuvieron whiskers de celulosa a partir de pasta blanqueada. La adición en una matriz de policaprolactona produjo materiales compuestos con propiedades mecánicas superiores a la matriz, con buena dispersión de los whiskers. 3. Obtención de fibras de celulosa bacterial y nanofibras de celulosa, aislamiento y utilización sobre una matriz de polivinil alcohol. Se obtuvo celulosa bacterial a partir de la bacteria Gluconacetobacter xylinum. Además se fabricaron nanofibras de celulosa a partir eucalipto blanqueado. La celulosa bacterial como material de refuerzo no produjo importantes mejoras en las propiedades mecánicas de la matriz; en cambio se observaron mejoras destacables con la nanofibra como refuerzo.
Resumo:
The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications
Resumo:
Because of the various matrices available for forensic investigations, the development of versatile analytical approaches allowing the simultaneous determination of drugs is challenging. The aim of this work was to assess a liquid chromatography-tandem mass spectrometry (LC-MS/MS) platform allowing the rapid quantification of colchicine in body fluids and tissues collected in the context of a fatal overdose. For this purpose, filter paper was used as a sampling support and was associated with an automated 96-well plate extraction performed by the LC autosampler itself. The developed method features a 7-min total run time including automated filter paper extraction (2 min) and chromatographic separation (5 min). The sample preparation was reduced to a minimum regardless of the matrix analyzed. This platform was fully validated for dried blood spots (DBS) in the toxic concentration range of colchicine. The DBS calibration curve was applied successfully to quantification in all other matrices (body fluids and tissues) except for bile, where an excessive matrix effect was found. The distribution of colchicine for a fatal overdose case was reported as follows: peripheral blood, 29 ng/ml; urine, 94 ng/ml; vitreous humour and cerebrospinal fluid, < 5 ng/ml; pericardial fluid, 14 ng/ml; brain, < 5 pg/mg; heart, 121 pg/mg; kidney, 245 pg/mg; and liver, 143 pg/mg. Although filter paper is usually employed for DBS, we report here the extension of this alternative sampling support to the analysis of other body fluids and tissues. The developed platform represents a rapid and versatile approach for drug determination in multiple forensic media.
Resumo:
The purpose of this study was to design microspheres combining sustained delivery and enhanced intracellular penetration for ocular administration of antisense oligonucleotides. Nanosized complexes of antisense TGF-beta2 phosphorothioate oligonucleotides (PS-ODN) with polyethylenimine (PEI), and naked PS-ODN were encapsulated into poly(lactide-co-glycolide) microspheres prepared by the double-emulsion solvent evaporation method. The PS-ODN was introduced either naked or complexed in the inner aqueous phase of the first emulsion. We observed a marked influence of microsphere composition on porosity, size distribution and PS-ODN encapsulation efficiency. Mainly, the presence of PEI induced the formation of large pores observed onto microsphere surface. Introduction of NaCl in the outer aqueous phase increased the encapsulation efficiency and reduced microsphere porosity. In vitro release kinetic of PS-ODN was also investigated. Clearly, the higher the porosity, the faster was the release and the higher was the burst effect. Using an analytical solution of Fick's second law of diffusion, it was shown that the early phase of PS-ODN and PS-ODN-PEI complex release was primarily controlled by pure diffusion, irrespectively of the type of microsphere. Finally, microspheres containing antisense TGF-beta2 nanosized complexes were shown, after subconjunctival administration to rabbit, to significantly increase intracellular penetration of ODN in conjunctival cells and subsequently to improve bleb survival in a rabbit experimental model of filtering surgery. These results open up interesting prospective for the local controlled delivery of genetic material into the eye.
Resumo:
PURPOSE: To analyze outcomes after right portal vein embolization extended to segment IV (right PVE + IV) before extended right hepatectomy, including liver hypertrophy, resection rates, and complications after embolization and resection, and to assess differences in outcomes with two different particulate embolic agents. MATERIALS AND METHODS: Between 1998 and 2004, transhepatic ipsilateral right PVE + IV with particles and coils was performed in 44 patients with malignant hepatobiliary disease, including metastases (n = 24), biliary cancer (n = 14), and hepatocellular carcinoma (n = 6). Right PVE + IV was considered if the future liver remnant (FLR; segments II/III with or without I) was less than 25% of the total estimated liver volume (TELV). Tris-acryl microspheres (100-700 microm; n = 21) or polyvinyl alcohol (PVA) particles (355-1,000 microm; n = 23) were administered in a stepwise fashion. Smaller particles were used to occlude distal branches, followed by larger particles to occlude proximal branches until near-complete stasis. Coils were then placed in secondary portal branches. Computed tomographic volumetry was performed before and 3-4 weeks after right PVE + IV to assess FLR hypertrophy. Liver volumes and postembolization and postoperative outcomes were measured. RESULTS: After right PVE + IV with PVA particles, FLR volume increased 45.5% +/- 40.9% and FLR/TELV ratio increased 6.9% +/- 5.6%. After right PVE + IV with tris-acryl microspheres, FLR volume increased 69.0% +/- 30.7% and FLR/TELV ratio increased 9.7% +/- 3.3%. Differences in FLR volume (P = .0011), FLR/TELV ratio (P = .027), and resection rates (P = .02) were statistically significant. Seventy-one percent of patients underwent extended right hepatectomy (86% after receiving tris-acryl microspheres, 57% after receiving PVA). Thirteen patients (29%) did not undergo resection (extrahepatic spread [n = 9], inadequate hypertrophy [n = 3], other reasons [n = 1]). No patient developed postembolization syndrome or progressive liver insufficiency after embolization or resection. One death after resection occurred as a result of sepsis and hemorrhage. Median hospital stays were 1 day after right PVE + IV and 7 days after resection. CONCLUSION: Transhepatic ipsilateral right PVE + IV with use of particles and coils is a safe, effective method for inducing contralateral hypertrophy before extended right hepatectomy. Embolization with small spherical particles provides improved hypertrophy and resection rates compared with larger, nonspherical particles.
Resumo:
Purpose To characterize in vitro the loadability, physical properties, and release of irinotecan and doxorubicin from two commercially available embolization microspheres. Materials and Methods DC Bead (500-700 μm) and Hepasphere (400-600 μm) microspheres were loaded with either doxorubicin or irinotecan solutions. Drug amount was quantified with spectrophotometry, bead elasticity was measured under compression, and bead size and loading homogeneity were assessed with microscopy image analysis. Drug release was measured over 1-week periods in saline by using a pharmacopeia flow-through method. Results Almost complete drug loading was obtained for both microsphere types and drugs. Doxorubicin-loaded DC Beads maintained their spherical shape throughout the release. In contrast, Hepaspheres showed less homogeneous doxorubicin loading and, after release, some fractured microspheres. Incomplete doxorubicin release was observed in saline over 1 week (27% ± 2 for DC beads and 18% ± 7 for Hepaspheres; P = .013). About 75% of this amount was released within 2.2 hours for both beads. For irinotecan, complete release was obtained for both types of beads, in a sustained manner over 2-3 hours for DC Beads, and in a significantly faster manner as a 7-minute burst for Hepaspheres. Conclusions The two drug-eluting microspheres could be efficiently loaded with both drugs. Incomplete doxorubicin release was attributed to strong drug-bead ionic interactions. Weaker interactions were observed with irinotecan, which led to faster drug release.
Resumo:
OBJECTIVETo search for evidence of the efficiency of sodium hypochlorite on environmental surfaces in reducing contamination and prevention of healthcare-associated infection HAIs.METHODSystematic review in accordance with the Cochrane Collaboration.RESULTSWe analyzed 14 studies, all controlled trials, published between 1989-2013. Most studies resulted in inhibition of microorganism growth. Some decreased infection, microorganism resistance and colonization, loss of efficiency in the presence of dirty and surface-dried viruses.CONCLUSIONThe hypochlorite is an effective disinfectant, however, the issue of the direct relation with the reduction of HAIs remains. The absence of control for confounding variables in the analyzed studies made the meta-analysis performance inadequate. The evaluation of internal validity using CONSORT and TREND was not possible because its contents were not appropriate to laboratory and microbiological studies. As a result, there is an urgent need for developing specific protocol for evaluating such studies.
Resumo:
Bioactivity of Indonesian mahogany, Toona sureni (Blume) (Meliaceae), against the red flour beetle, Tribolium castaneum (Coleoptera, Tenebrionidae). The insecticidal activity of Toona sureni (Blume) Merr. was evaluated considering repellency, mortality and progeny production of F1 adults of Tribolium castaneum (Herbst, 1797) (Coleoptera, Tenebrionidae). Dried extract of seeds of T. sureni was dissolved in acetone to prepare solution of various concentrations (0.5, 1.0, 2.5 and 5.0%). To test for repellency, the insects were exposed to treated filter paper. Mortality of larvae, pupae and adults was evaluated by the treatment of spraying the insects with different concentrations of T. sureni extract. Residual effect of the extract was also evaluated considering the production of progeny of F1 adults. The highest repellency (93.30%) of T. castaneum occurred at the highest concentration (5.0% suspension of T. sureni); while the lowest (0.0%) repellency occurred at 0.5% suspension after 1 day of treatment. The highest mortality against adults (86.71%), larvae (88.32%) and pupae (85%) occurred at 5% suspension at 8 days after application. There was a negative correlation between the concentrations of T. sureni and the production of F1 adult's progeny of T. castaneum. The highest number of progeny (147) of T. castaneum occurred in the control at 7 days after treatment; and the lowest number of progeny (43) occurred at 5.0% concentration in 1 day after treatment. The results show that T. sureni is toxic to T. castaneum and has the potential to control all stages of this insect in stored wheat.