Opening words and orientation to the theme

Esitys KDK-käytettävyystyöryhmän järjestämässä seminaarissa: Miten käyttäjien toiveet haastavat metatietokäytäntöjämme? / How users' expectations challenge our metadata practices? 30.9.2014.

Numerical simulation of rotor-stator interaction and tip clearance flow in centrifugal compressors

The effect of the tip clearance and vaneless diffuser width on the stage performance and flow fields of a centrifugal compressor were studied numerically and results were compared to the experimental measurements. The diffuser width was changed by moving the shroud side of the diffuser axially and six tip clearances size from 0.5 to 3 mm were studied. Moreover, the effects of rotor-stator interaction on the diffuser and impeller flow fields and performance were studied. Also transient simulations were carried out in order to investigate the influence of the interaction on the impeller and diffuser performance parameters. It was seen that pinch could improve the performance and it help to get more uniform flow at exit and less back flow from diffuser to the impeller.

STIM1/Orai1-mediated store-operated Ca2+ entry: the tip of the iceberg

Highly efficient mechanisms regulate intracellular calcium (Ca2+) levels. The recent discovery of new components linking intracellular Ca2+ stores to plasma membrane Ca2+ entry channels has brought new insight into the understanding of Ca2+ homeostasis. Stromal interaction molecule 1 (STIM1) was identified as a Ca2+ sensor essential for Ca2+ store depletion-triggered Ca2+ influx. Orai1 was recognized as being an essential component for the Ca2+ release-activated Ca2+ (CRAC) channel. Together, these proteins participate in store-operated Ca2+ channel function. Defective regulation of intracellular Ca2+ is a hallmark of several diseases. In this review, we focus on Ca2+ regulation by the STIM1/Orai1 pathway and review evidence that implicates STIM1/Orai1 in several pathological conditions including cardiovascular and pulmonary diseases, among others.

Development of a Control System for a Tele Operated Mobile Robot

Mobile robots are capable of performing spatial displacement motions in different environments. This motions can be calculated based on sensorial data (autonomous robot) or given by an operator (tele operated robot). This thesis is focused on the latter providing the control architecture which bridges the tele operator and the robot’s locomotion system and end effectors. Such a task might prove overwhelming in cases where the robot comprises a wide variety of sensors and actuators hence a relatively new option was selected: Robot Operating System (ROS). The control system of a new robot will be sketched and tested in a simulation model using ROS together with Gazebo in order to determine the viability of such a system. The simulated model will be based on the projected shape and main features of the real machine. A stability analysis will be performed first theoretically and afterwards using the developed model. This thesis concluded that both the physical properties and the control architecture are feasible and stable settling up the ground for further work with the same robot.

Seed anatomy and germination of Phoenix roebelenii O'Brien (Arecaceae)

The objective of this study was to investigate the morphology, anatomy and germination behaviour of Phoenix roebelenii seeds. Biometric data were obtained by measuring 100 seeds extracted from recently harvested fruits and air-dried for one day. Four replications of 50 seeds each were previously treated with Vitavax-Thiran and then put to germinate in Sphagnum sp. in plastic trays at room temperature. Morphological details of the seeds were documented with the help of a scanning electronic microscope and then drawings were made with the help of a clear camera coupled to a stereomicroscope. Permanent lamina containing embryo sections were prepared to study its anatomy. The mean dimensions of the seeds were: length of 10.32mm, width of 5.21mm and thickness of 3.91mm. The weight of one thousand seeds was of 151.1g and the mean number of units.kg-1 was 6,600. Germination started between 27 and 58 days after sowing. The seeds are of the albuminous type, the endosperm is hard and the embryo (which is not clearly differentiated) occupies a lateral and peripheral position. During seed germination, seedling protrusion begins with the opening of an operculum, through which the cotyledon petiole is emitted with the embryonic axis at its tip. The portion of the cotyledon petiole that remains inside the seeds acts as a haustorium for the absorption of nutrients from the endosperm. The plumule emerges through a rift in the posterior part of the cotyledon. Secondary roots are observed to grow from the anterior part of the primary root.

Optimal distance of the light-curing tip for light transmission through the resin composite

Hammaslääketieteessä käytetettävien komposiittien valonläpäisevyys vaihtelee. Samoin LED-valokovettimet eroavat toisistaan valotehonsa ja muotoilunsa perusteella. On yleisesti tiedossa, että valokovettimesta tulevan valon intensiteetti pinta-alayksikköä kohden heikkenee, kun kovettimen etäisyys kasvaa. Toisaalta ei ole tiedossa, miten valokovetettavan kohteen ja valokovettimen kärjen väliin sijoitettu materiaali tarkalleenottaen vaikuttaa valon intensiteettiin eri etäisyyksiä käytettäessä. Tämän tutkimuksen tarkoituksena on selvittää, miten valokovetettavan kohteen ja valokovettimen kärjen väliin asetettava etukäteen polymerisoitu materiaali vaikuttaa valon intensiteettiin eri etäisyyksillä. Tutkimus suoritettiin käyttämällä kahta eri valokovetinta. Jotta etäisyyden vaikutusta valotustehoon voitiin demonstroida, vaihdettiin kovettimen etäisyyttä sensorista 0,2,4,6,8,10mm välillä. Valotehot rekisteröitiin MARC resin calibrator -laitteella. Sensorin ja valokovettimen kärjen väliin asetettavat erilaiset komposiittilevyt olivat valmiiksi kovetettuja,1mm paksuisia, filleripitoisuuksiltaan neljää erilaista muovia. Valotehot rekisteröitiin jokaiselta etäisyydeltä komposiitin ollessa sensorin päällä. Rinnakkaisesti verrattiin myös etäisyyden vaikutusta valotehoon ilman esikovetettua materiaalia kovettimen kärjen ja valoa mittaavan sensorin välissä. Vertailun suorittamiseksi laskettiin intensiteettisuhdeluku muovillisen ja muovittoman arvon välillä aina tietyllä etäisyydellä Valokovettimen kärjen etäisyyden kasvattaminen sensorista (eli valokovetettavasta kohteesta) odotusten mukaisesti pienensi valotehoa. Laittamalla sensorin ja kovettimen väliin komposiittilevy, valoteho pieneni odotetusti vielä enemmän. Tutkittaessa intensiteettisuhdetta (valoteho muovin kanssa : valoteho ilman muovia) kuitenkin huomattiin, että 4-6mm:n kohdalla suhdeluku oli suurempi kuin 0,2,8 ja 10mm kohdalla. Johtopäätöksenä oli, että suurin mahdollinen valokovetusteho saavutetan laittamalla kovetuskärki mahdollisimman lähelle kohdetta. Jos valokovetettavan kohteen ja valokovettimen kärjen välissä oli kiinteä komposiittipalanen, suurin mahdollinen valokovetusteho kohteeseen saavutetaan edelleen laittamalla kovetuskärki kiinni muoviin. Jos etäisyyttä muovin pinnasta sen sijaan kasvatettiin, valokovetusteho ei laskenutkaan niin nopeasti kuin oli odotettu. Tämä voi liittyä siihen, että tehokkaan valokeilan halkaisijan koko on suurempi verrattuna komposiitin sekä sensorin halkaisian kokoon. Toiseksi on arvioitu, että resiinikomposiitin täyteaineet voisivat fokusoida läpi kulkevaa valoa sensoriin. Se, pitääkö tämä ilmiö paikkansa, vaatii kuitenkin enemmän tutkimusta

Opening words

Presentation at the seminar "Publishers and Funders for OA in Finland", Helsinki, May 24, 2016

Science Complex Opening

Pictured here from left to right are James Gibson, President Emeritus, R. A. Macleod, Board of Trustees, and Dr. Cecil Shaver, former Chancellor, during the 1984 Science Complex opening - an addition to the Mackenzie Chown Complex now simply known as H Block.

Science Complex Opening

Pictured here from left to right are Henry Tomarin, Board of Trustees, St. Catharines Mayor Roy Adams, R. Campbell, Niagara Region chairman, Peter Misener, and R. Misener, Chancellor, during the 1984 Science Complex opening - an addition to the Mackenzie Chown Complex now simply known as H Block.

Science Complex Opening

Dr. Earp unveils a sign at the joint Science Complex opening ceremony and the Academic Staging Building renaming ceremony. The Academic Staging Building was henceforth called the Mackenzie Chown Complex.

Science Complex Opening

Dr. Alan Earp speaks at the opening ceremony for the Science Complex addition in 1984.

Science Complex Opening

Doris Chown speaking at the Science Complex Opening and the unveiling of a sign in conjunction with the renaming of the Academic Staging Building to the Mackenzie Chown Complex.

Science Complex Opening

Robert S. K. Welch celebrates the opening of the new Science Complex wing, an addition to the Mackenzie Chown Complex, as Dr. Alan Earp (pictured behind Welch) and others look on. The new name for the Academic Staging Building was also unveiled. It was renamed after former mayor Mackenzie Chown.

Science Complex Opening

Rather then cutting a piece of red tape with scissors, the Science students at Brock prepared a laser devise to cut through a specially made piece of metallic ribbon for the opening ceremony of the Science Complex addition. Pictured here is Robert Welch with the laser device as he attempts to 'cut' the tape. Unfortunately the device failed and Dr. Earp resorted to cutting the tape with a Swiss Army knife he had on hand.

Official Opening Programme

The programme for the official opening held in 1964.