Measurement of fats, oil and grease by spectro-photometry and its application on different sites at São Paulo State, Brazil

This investigation was carried out within the Parana sedimentary basin, Brazil, involved the sampling of effluents and groundwater from monitoring stations situated at different sites at São Paulo State, and was realized with the purpose of evaluating the presence of fats, oil and grease (FOG) in different matrices. Several tests were realized with very distinct materials (cooking oil, butter, margarine, pig fat, vacuum pump oil) in order to properly calibrate the spectrophotometric system. Each matrix was dissolved with 1,1,1-trichloroethane and from the stock solutions it was prepared working standards from different dilutions. The data obtained were plotted on absorbance vs. concentration graph that yielded a successful calibration curve when a mineral oil for vacuum pump was utilized in the experiments at a wavelength corresponding to 410 mn. The results obtained for the analyzed samples were compared with the limiting value established by the São Paulo State legislation on the prevention and pollution control of the environment that was established in 8(th) September 1976 by Rule No. 8468.

Produtividade e característica tecnológica de grãos em feijoeiro adubado com nitrogênio e molibdênio

O objetivo deste trabalho foi avaliar o efeito da adubação com nitrogênio e molibdênio, na produtividade e nas características tecnológicas dos grãos de feijão. O delineamento utilizado foi o de blocos ao acaso, em esquema fatorial 4x2, constituído por doses de nitrogênio em cobertura (0, 30, 60 e 120 kg ha-1), aliado à aplicação ou não de molibdênio por via foliar (0 e 80 g ha-1), com quatro repetições. A semeadura do feijão, cultivar Pérola, foi realizada em condições de sequeiro e no sistema de plantio direto. A adubação nitrogenada em cobertura e a molíbdica via foliar não influenciam a produtividade, mas interferem na característica tecnológica dos grãos de feijão. O teor de proteína bruta, o tempo de cozimento e o tempo para a máxima hidratação dos grãos aumentam com as doses de nitrogênio em cobertura. O tempo de cozimento é maior, à medida que há incremento de nitrogênio aplicado em cobertura, com uso de molibdênio via foliar. O uso de molibdênio via foliar proporciona o menor tempo para a máxima hidratação de grãos.

Indoor NO2 air pollution and lung function of professional cooks

Studies of cooking-generated NO2 effects are rare in occupational epidemiology. In the present study, we evaluated the lung function of professional cooks exposed to NO2 in hospital kitchens. We performed spirometry in 37 cooks working in four hospital kitchens and estimated the predicted FVC, FEV1 and FEF25-75, based on age, sex, race, weight, and height, according to Knudson standards. NO2 measurements were obtained for 4 consecutive days during 4 different periods at 20-day intervals in each kitchen. Measurements were performed inside and outside the kitchens, simultaneously using Palm diffusion tubes. A time/exposure indicator was defined as representative of the cumulative exposure of each cook. No statistically significant effect of NO2 exposure on FVC was found. Each year of work as a cook corresponded to a decrease in predicted FEV1 of 2.5% (P = 0.046) for the group as a whole. When smoking status and asthma were included in the analysis the effect of time/exposure decreased about 10% and lost statistical significance. on predicted FEF25-75, a decrease of 3.5% (P = 0.035) was observed for the same group and the inclusion of controllers for smoking status and asthma did not affect the effects of time/exposure on pulmonary function parameter. After a 10-year period of work as cooks the participants of the study may present decreases in both predicted FEV1 and FEF25-75 that can reach 20 and 30%, respectively. The present study showed small but statistically significant adverse effects of gas stove exposure on the lung function of professional cooks.

Teores de poliaminas em alguns alimentos da dieta básica do povo brasileiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Parâmetros de qualidade da carne de cordeiros submetida aos processos de maturação e injeção de cloreto de cálcio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade físico-química e sensorial da carne de peito de matrizes pesadas de descarte

O objetivo do presente trabalho foi avaliar as características de qualidade: pH, cor, valor R, perda por exsudação, capacidade de retenção e absorção de água, capacidade de emulsificação, perdas por cocção, força de cisalhamento e análise sensorial da carne de matrizes pesadas de descarte de frangos de corte. A carne de peito de matrizes apresentou valores médios do parâmetro pH, valor R, perda por exsudação e valor de L* de 5,70, 1,43, 2,00 e 50,11, respectivamente. Para a capacidade de retenção e absorção de água, perda de peso por cozimento e força de cisalhamento, os valores médios foram de 77, 58, 18% e 4,94kgf cm-2, respectivamente. Na análise sensorial, a carne de matriz apresentou baixa intensidade de maciez (6,9) e menor suculência (3,4) e foi a mais elástica, borrachenta e difícil de deglutir. A carne de matrizes pesadas de descarte apresenta boas características de qualidade tecnológicas que possibilitam sua utilização como matéria-prima para a elaboração de industrializados.

Qualidade da carne de cordeiros Santa Inês puros e mestiços com Texel abatidos com diferentes pesos

Propôs-se avaliar os parâmetros de qualidade pH, cor, perda de peso por cozimento (PPC) e força de cisalhamento (FC) no músculo Longissimus dorsi (LD) e Semimembranosus (SM) de 13 cordeiros machos e 14 fêmeas Santa Inês puro (SI x SI) e o mesmo número de animais Texel x Santa Inês (T x SI), abatidos com 15, 25, 35 e 45 kg PV. A carcaça foi resfriada por 24 horas a 2ºC, realizando-se, durante este período, as medidas de pH. Retiraram-se os músculos LD e SM para as análises de cor, PPC e FC. Utilizou-se um DIC, fatorial 2x2x4, e as médias foram analisadas pelo Proc GLM do programa estatístico SAS. As medidas de pH foram analisadas em parcela subdividida. A queda do pH no LD e SM foi mais acentuada para os animais mais leves. A carne das fêmeas T x SI apresentou pH final maior que a dos machos e cordeiros SI x SI. A luminosidade diminuiu e a intensidade da cor vermelha elevou-se com o aumento do peso de abate. A carne dos machos e dos cordeiros SI x SI apresentou coloração mais vermelha e menos luminosa no LD e SM. A PPC foi menor na carne dos cordeiros mais pesados; no músculo LD, dos machos houve menor perda de água que nos das fêmeas. Os machos tiveram carne mais dura e, com o aumento do peso de abate, houve diminuição de FC, sendo maior para o T x SI para o músculo LD e Santa Inês puro para o músculo SM.

Composição física da carcaça e aspectos qualitativos da carne de bovinos de diferentes raças alimentados com diferentes níveis de energia

Com o objetivo de estudar as características qualitativas da carcaça e da carne de bovinos machos não-castrados abatidos aos 13-14 meses de idade, foram utilizados 16 animais, oito Aberdeen Angus (AA) e oito Hereford (HE), alimentados na fase de terminação com dietas formuladas com dois níveis de energia digestível (ED), o menor 3,07 Mcal/kg de ED (12% de concentrado) e o maior 3,18 Mcal/kg de ED (32% de concentrado). Os animais foram confinados a partir dos 9 meses de idade com peso médio de 220,31 kg e foram abatidos quando, por estimativa, o peso da carcaça atingiu, no mínimo, 190 kg. O delineamento experimental foi o inteiramente casualizado, com quatro tratamentos, em esquema fatorial 2 x 2 (duas raças vs dois níveis de energia). A carne dos animais HE perdeu menos líquido durante os processos de descongelamento e cocção. Além disso, apresentou maior maciez pelo painel de avaliadores e pelo aparelho Shear Force. As carcaças dos animais que receberam o maior nível de energia na dieta apresentaram maior proporção de músculo e, durante o processo de descongelamento, perdeu menos líquido (2,54 vs 7,22%). Quando avaliada pelo aparelho Shear Force, a carne dos animais alimentados com maior nível de energia na dieta mostrou-se mais macia. Verificou-se interação significativa raça ´ nível de energia para o sabor e a coloração da carne, de modo que a carne dos animais AA, alimentados com menor nível de energia, mostrou-se mais saborosa e com melhor coloração.

Qualidade de carnes provenientes de cortes da carcaça de cordeiros e de ovinos adultos

Com o objetivo de estudar as características qualitativas da carne de ovinos de diferentes categorias quanto aos músculos dos cortes da carcaça (paleta, lombo e perna), utilizaram-se 18 ovinos ½ Ile de France ½ Ideal (seis cordeiros não-castrados, seis ovelhas de descarte e seis machos adultos castrados). Os animais foram criados em pasto de capim-tifton 85 e receberam suplementação (concentrado). Os cordeiros foram abatidos aos 32 kg, com aproximadamente 5 meses de idade, e as ovelhas e os machos adultos castrados, com 55 kg e aos 60 meses de idade. Não houve diferenças nos valores de pH 45 minutos e pH 24 horas entre as categorias animais e nos músculos dos cortes da carcaça. A idade de abate influenciou a luminosidade da carne de todos os músculos. O teor de vermelho não diferiu entre os animais adultos, mas foi superior aos valores obtidos na carne dos cordeiros. A carne de animais adultos é mais escura que a de cordeiros. As perdas por cocção no músculo Triceps brachii são maiores que no Longissimus lumborum e Semimembranosus. Os valores de pH e a capacidade de retenção de água são similares entre as categorias animais.

Qualidade e composição química da carne de bovinos de corte inteiros ou castrados de diferentes grupos genéticos Charolês x Nelore

Seventy beef males of three breeding systems (BS), straightbreds Charolais (Ch) and Nellore (Ne), G1 crossbreds: 1/2 Ch + 1/2 Ne (1/2 Ch) and 1/2 Ne + 1/2 Ch (1/2 Ne) and G2 crossbreds: 3/4 Ch + 1/4 Ne (3/4 Ch) and 3/4 Ne + 1/4 Ch (3/4 Ne) were used. The number of animals by genetic group was, respectively, 15, 12,8, 12,14 and 9. Thirty-five males were castrated (C) at seven months and 35 were kept intact (1). The animals were feedlot finished from 20 to 24 months. The longissimus dorsi muscle was used for the meat evaluation. No significant interaction was observed between genetic composition and sexual condition, for the variables studied. The I males displayed meat with darker color (3.05 vs. 3.78 points) with less amount of marbling (4.26 vs. 5.75 points) and less amount of ether extract (1.73 vs. 2.88%). However they presented larger (66.03 vs. 60.50 cm(2)) longissimus dorsi area and meat with better palatability, juiciness and tenderness. Ch animals had larger longissimus dorsi than the Ne. In the G I group, the 1/2 Ch meat showed larger amount of marbling and ether extract and less cooking losses than the 1/2 Ne meat. Between G2 animals, the 3/4 Ne showed meat with larger thawing losses and larger amount of ether extract. In G1 animals meat, the heterosis level reached 18.54% for longissimus dorsiarea, 28.10% for ether extract and 64.01% for amount of marbling. In G2, the heterosis was -17.30% for lean texture and 10.40% for longissimus dorsi area.

The use of extruded feed in fish food

In our country, the intensive culture of fish has been making progress due to the availability of extruded rations, which are characterized by the way they have been formulated to assist the nutritional demands of the tropical species and for facilitating a better practice of alimentary handling. This process checks the extruded product density and the desirable physical/chemical aspects to a diet that should be handled in the water, the critical factor of this activity. It is important to emphasize that this product stays to the surface of the water, facilitates the consumption control and the observation of the general aspects of the school of fish, as well as guaranteeing that no deterioration of the physical/chemical characteristics of the water occurs. The floating characteristic of the extruded ration is preferable for farmers because most of the tropical species feed at the surface of the water. In some cases, in the function of the alimentary habit, the thermal conditions of the water and the handling system produce granules with different densities. This is due to the humidity and the applied cooking heat, which modifies the time of hydration, and consequently the ability to float. To establish the physical presentation idea for a ration for tropical fishes, it is necessary that the pellets come in sizes, textures, humidities and densities in order to allow for the different phases of the lives of the fishes. This ration should be the result of characteristics of the species, such as the anatomophysiologics particularities, alimentary habits, digestive capacity and alimentary behavior. Only in this way is it possible to offer to those fishes a ration whose nutritious value and physical presentation facilitate the best biological and economic answers.Those aspects need to be reviewed because the tropical species that are cultivated in our country present selective behavior in relation to the size of the pellet. Generally, this has access to the digestive system without waste; the digestibility, therefore, is dependent upon the size of the particles and the physical aspects of the pellets. They should still consider that those granules could be less abrasive and softer. The extruded rations available in the national market present a qualitative reference to its proteic level, whose consequence allows us to infer that those are overestimated for the final phase of those fishes. Thus, the final cost of production is made unfeasible. In this point of view of the development of the national fish culture, and the growing adoption of the intensive system of production, it can link that such progress is a function of the availability of the rations in the extruded form. Although this technique of processing of rations has revolutionized the market in such a way that has been seen as preferable for farmers, some feel that there is a lack of products best suited for the initial phases of fingerlings production.

Desempenho em pastagens e características de carcaça da 16a progênie dos rebanhos Nelore, Guzerá e Caracu de Sertãozinho (sp)

Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.

Thermo-physical properties of cooked ham

Experimental studies were carried out to determine thermal conductivity (k), thermal diffusivity (alpha), specific heat at constant pressure (c(p)), and density (rho) of cooked ham as functions of both sample moisture content (M) and temperature (T). Thermal conductivity was measured using the heat-line-source probe, thermal diffusivity by Dickerson method, specific heat by differential scanning calorimeter, and density by pycnometer assembly. Temperature ranged from 3.0 degrees C to 74.0 degrees C, corresponding to the cooking process, and moisture ranged from 40.0 to 73.0% (w. b.). Equations are provided for alpha as a function of M, c(p) as a function of T, and rho as a function of both M and T. Results for thermal conductivity are compatible with those published in the literature.

Características físico-químicas, cozimento e produtividade de mandioca cultivar IAC 576-70 em diferentes épocas de colheita.

The instability of cassava culinary quality is a problem in the market. This work had the purpose of evaluating the interference of the productivity, rain precipitation and physical-chemical characteristics on the cooking time of the IAC 576-70 cultivar, from the 6(th) to the 12(th) month after the planting. The physical parameters evaluated were: difficulty in peeling (easy, medium, and hard), difficulty in cutting in long, thin sticks with a manual machine, being those cut in a subjective way. In the analysis of the cooked root, the percentage of water absorbed into the cassava pieces, the color, white points formed inside the pieces of cassava, gel formation around the pieces of cassava, and cooking time were evaluated. The pH, acidity, moisture, ashes, fibers, ether extract, protein, reducing sugars, and starch of the roots were also monthly evaluated. From the results obtained in the present work, it may be concluded that the cassava IAC 576-70, when planted in July, in Botucatu-SP area, must be harvested at the age of nine months, without damage to the productivity, starch level and root cooking, and the harvest could be extended up to ten months. The producers should follow the sum of precipitation index ten days before the harvest, and this value should be the smallest as it may be and the producers should not harvest when this value is more than 100 mm, in order not to hinder the cooking of the root.

Measuring fluoride concentration in mineral waters in the Araraquara region, Brazil

It has been shown that people of all ages can benefit from the topical and systemic effects of water fluoridation. However, the increase in consumption of bottled water, either to substitute for or supplement consumption of water from public sources, has implications for safe fluoride supplementation. Taking that into consideration, in 1995 we analyzed the fluoride content in 31 commercial brands of mineral water in the region of Araraquara, state of Sao Paulo, Brazil. Fluoride concentration as determined by our analysis was compared to the concentration of fluoride specified on each label. Only 25% of the products studied listed the fluoride concentration on their labels. In addition, among 31 mineral water brands, 26 listed the date when the chemical analysis to determine chemical composition had been performed. Of these, 20 had not been put through the annual chemical analysis determined by Brazilian law. Based on these results, if the mineral waters tested had been the only source of drinking water, fluoride supplementation would have been necessary in 69% of the samples analyzed. In the case of children up to 6 years of age who use products containing fluoride, such as topical gels, mouthwashes or toothpastes, supplementation should be recommended only if commercially bottled water is the only source of water used, not only for drinking but for cooking as well.