Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor

Estudo do resíduo fosfogesso na formulação de uma pasta para revestimento interno de edifícios

Universidade Federal do Rio Grande do Norte

Desempenho e eficiência biológica de bubalinos de três grupos genéticos terminados em confinamento e abatidos em diferentes estádios de maturidade

Neste trabalho objetivou-se estudar o desempenho e a eficiência biológica de 48 bubalinos (16 Murrah - MUR, 16 Jafarabadi - JAF e 16 Mediterrâneo - MED) com média de 18 meses de idade e de peso vivo inicial de 330 kg terminados em confinamento. Quatro animais de cada grupo genético foram designados por sorteio para o abate inicial e serviram de referência para o estudo dos pesos iniciais de corpo vazio e de carcaça. Os 12 animais restantes de cada grupo genético foram divididos aleatoriamente em três subgrupos de quatro animais e submetidos aos seguintes tratamentos: Maturidade 1 (400 kg PV ao abate); Maturidade 2 (450 kg PV ao abate); Maturidade 3 (500 kg PV ao abate). Foi fornecida uma ração única, ad libitum, para todos os animais, composta por 50% de feno de coastcross na MS e 50% de concentrado à base de fubá de milho, uréia e farelo de soja, devidamente suplementado com minerais. Após os abates pré-fixados, determinou-se o peso corporal vazio (PCVZ) dos animais, por meio do somatório das partes integrantes do corpo. Os consumos médios diários de MS e MO não diferiram entre grupos genéticos, embora animais JAF tenham apresentado os maiores valores numéricos. Animais MUR, JAF e MED não diferiram quanto aos ganhos de peso corporal vazio e de carcaça. Não houve diferenças quanto à eficiência biológica (ganho de peso corporal vazio e ganho de carcaça por unidade de energia metabolizável ingerida) entre os grupos genéticos, embora animais Murrah tenham apresentado os maiores valores. Bubalinos abatidos aos 400 e 450 kg apresentaram melhor eficiência de ganho de peso corporal vazio e ganho de carcaça que os abatidos aos 500 kg.

Redução da morbi-mortalidade na síndrome de hellp completa com o uso de altas doses de dexametasona

Objective: To determine the clinical maternal and neonatal outcomes in HELLP syndrome patients treated with dexamethasone who either developed renal injury or renal insufficiency and to identify predictive values of urea and creatinine for the identification of subjects with HELLP syndrome at risk of developing renal insufficiency. Methods: Non-radomized intervention study of dexamethasone use in HELLP syndrome. A total of 62 patients were enrolled at Maternidade Escola Januário Cicco (MEJC). Patients received a total of 30 mg of dexamethasone IV, in three doses of 10 mg every 12 hours. A clinical and laboratory follow up were performed at 24, 48 and 72 hours. Patients were followed up to 6 months after delivery. Patients were grouped in accordance to renal function, i.e, normal and some type of renal lesion. Renal lesion was considered when creatinine was equal or greater than 1.3 mg/dl and diuresis less than 100 ml in 4 hours period and renal insufficiency was defined when dialysis was needed. Results: A total of 1230 patients with preeclampsia were admitted at MEJC. Of those 62 (5%) developed HELLP syndrome. There was no statistical difference in the groups with renal involvement or normal renal function with respect to the demographics, type of anesthesia used and delivery, and weight of the newborn. An improvement in the AST, ALT, LDH, haptoglobine, antithrombine, fibrinogenen and platelets was observed within 72 hours after dexamethosone use. There was a significant increase in the diuresis within the interval of 6 hours before the delivery and 24 hours after it. Of the 62 patients, 46 (74. 2%) had normal renal function and 16 (25.8%) evolved with renal lesion, with 5 (8.1%) needing dialysis. These 5 patients who received dialysis recovered the xi renal function. The delay in administering dexamethasone increased in 4.6% the risk of development of renal insufficiency. Patients with renal insufficiency had received significantly more blood products than subjects without renal lesion (p=0.03). Diuresis, leukocytes, uric acid, urea, creatinine were significantly different between the groups with normal renal function, renal lesion and renal insufficiency. The levels of creatinine 1.2mg/dl and uric acid 51mg/dl, at admission are predictive of subjects who will evolve with renal lesion (p<0.001). Maternal mortality was 3.2%. None of the subjects with renal insufficiency evolved with chronic renal disease. Conclusions: Dexamethasone in patients with HELLP syndrome seems to reduce significantly the hepatic microthrombosis and normalize hemostasis as seen by improvement of liver function. Renal injury can be considered, in HELLP syndrome, when creatinine levels are greater than 1.3 mg/dl and diuresis less than 100 ml/h in interval of 4 hours. The level of creatinine greater than 1.2 mg/dl and urea greater than 51mg/dl are predictive of subjects with HELLP syndrome who will develop renal injury. Patients who receive more red cell packs develop renal insufficiency. Finally, the delay in administering dexamethasone increases the risk of developing renal insufficiency

Superação de dormência das sementese controle químico de plantas de Momordicacharantia L

This experiment were performed to evaluate methods of seeds scarification for overcoming dormancy and the efficacy of six herbicides registered for sugarcane to control adult plants of Mcharantia. The experimental design was completely randomized, with four replications in both trials. The first trial is a factorial 2x8 (two times of seeds collection (2006 and 2007) with eight methods of breaking dormancy (mechanical scarification; 100% and 50% concentrated sulfuric acid; 2% potassium nitrate for three and six hours; heat dried at 60 degrees C; hot water at 60 degrees C and an untreated control). In the second trial evaluated the control of M. charantia through six different herbicides: Imazapic, Metsulfuron-methyl, Metribuzin, 2,4-D, Amicarbazone, Paraquat and a control without herbicide application. Thus, it can be concluded that the seeds were immersed in concentrated sulfuric acid for three minutes and potassium nitrate for three hours gave a higher percentage and germination speed and the herbicide Metribuzin reached, albeit belatedly, a total control of M. charantia.

Métodos de superação de dormência em sementes de Ipomoea e Merremia

Este trabalho objetivou avaliar os efeitos de métodos de superação de dormência sobre a germinação das sementes de Ipomoea grandifolia, I. hederifolia, I. nil, I. quamoclit, Merremia aegyptia e M. cissoides. Os tratamentos consistiram em ácido sulfúrico concentrado, nitrato de potássio, água quente e calor seco (50 ºC), lixa e fogo. Constatou-se que o ácido sulfúrico promoveu aumento na germinação das sementes de I. grandifolia (58, 37, 22 e 34%), I. hederifolia (76, 49, 82 e 55%), I. quamoclit (43, 33, 66 e 35%), I. nil (69, 79, 72 e 62%), M. cissoides (8, 19, 35 e 57%) e M. aegyptia (24, 64, 56 e 63%) após períodos de imersão de 5, 10, 15 e 20 minutos, respectivamente. A água (20 e 40 minutos), o calor seco (20 e 40 minutos) e o fogo melhoraram a germinação de I. grandifolia (68, 59, 62, 67 e 59%), M. cissoides (50, 52, 18, 25 e 46%) e M. aegyptia (54, 47, 21, 21 e 45%), respectivamente. O calor seco de 20 e 40 minutos melhorou a germinação de I. nil (49 e 36%), e o de 40 minutos, a de I. hederifolia (70%). O uso de nitrato de potássio e lixa não proporcionou melhoria na germinação das sementes.

Composição tecidual dos cortes da carcaça de ovinos jovens e adultos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de subprodutos de oleaginosas sobre parâmetros ruminais e a degradação da matéria seca e da proteína bruta

Avaliou-se o efeito da adição de subprodutos de oleaginosas na dieta de ovinos em substituição ao farelo de soja. Foram distribuídos quatro ovinos Santa Inês, com peso corporal de, aproximadamente, 40kg, canulados no rúmen, em quadrado latino (4x4), com quatro dietas e quatro períodos, analisados por regressão para a avaliação da degradação ruminal, dos valores de pH e das concentrações de nitrogênio amoniacal in vivo. Os subprodutos foram as tortas de amendoim, girassol e soja, em dietas isonitrogenadas, com 70% de concentrado e 30% de volumoso (feno de tifton). Não foi observado efeito da interação tempo x dieta para os valores de pH e concentração ruminal de nitrogênio amoniacal (P>0,05). O pH apresentou valor médio de 6,2. As concentrações ruminais de nitrogênio amoniacal não foram afetadas, com valor médio de 29,9mg/dL. Não foram observadas diferenças (P>0,05) nas taxas de degradação da matéria seca e na degradabilidade potencial.

Digestive and functional properties of a partially hydrolyzed cassava solid waste with high insoluble fiber concentration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Arraste via fecal de nutrientes da ingestão produzido por bagaço de mandioca hidrolisado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digestibilidade Aparente da Proteína Bruta e dos Componentes da Parede Celular de uma Ração Completa, com Bovinos de Diferentes Grupos Genéticos

Avaliaram-se os coeficientes de digestibilidade do extrato etéreo (EE), proteína bruta (PB), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), hemicelulose (HCEL) e celulose (CEL) de uma ração completa, composta por 44,3% de feno de braquiária, 55% de concentrado e 0,7% de mistura mineral, fornecida a bovinos de diferentes grupos genéticos (Gir, Nelore, Guzerá, Santa Gertrudis e Caracu), pelas metodologias de coleta total de fezes e com indicador interno (lignina em detergente ácido - LDA), em delineamento inteiramente casualizado, com três repetições por grupo genético, com análise de variância individual dentro de cada metodologia e uma análise de correlação entre as metodologias. Não houve diferença entre grupos genéticos para a digestibilidade de EE, PB, FDN, FDA, HCEL e CEL, pelas metodologias de coleta total de fezes e com LDA, com médias de 44,28 e 40,38%; 52,46 e 49,51%; 57,04 e 54,25%; 37,71 e 34,04%; 71,66 e 69,68%; e 48,27 e 45,20%, respectivamente. As digestibilidades da PB, FDA e CEL não mostraram correlação. A LDA foi eficiente na estimativa da digestibilidades e os nutrientes foram utilizados de forma semelhante pelos diferentes grupos genéticos.

Efeito da metionina protegida e não protegida da degradação ruminal sobre a produção e composição do leite de vacas holandesas

Utilizaram-se vacas Holandesas com produção superior a 20 kg de leite/dia, de primeira e segunda lactações, com 19±6 dias em lactação, para avaliar o efeito da suplementação com 8,4 g/dia de metionina protegida (MPDR) ou 8,4 g/dia de metionina não-protegida da degradação ruminal (MNPDR) sobre a produção e composição do leite, comparativamente a vacas controle, durante 90 dias. As vacas foram alimentadas com ração completa constituída por silagem de milho e concentrado. Produção de leite, teor de proteína do leite e produção de proteína não foram afetados pela suplementação com MPDR. As produções médias de leite foram 27,70; 27,09 e 27,61 kg/dia; os teores médios de proteína, 2,83; 2,85 e 2,77%; e as produções de proteína do leite, 0,77; 0,76 e 0,79 kg/dia, respectivamente, para vacas controle, suplementadas com MPDR e MNPDR. O teor de gordura do leite foi de 2,39; 2,12 e 1,89% paras vacas suplementadas com MPDR, MNPDR e controle, respectivamente. A produção diária de gordura foi 0,57; 0,58 e 0,58 kg/dia e a produção diária de leite corrigido para gordura (3,5%), 21,25; 21,19 e 21,35 kg/dia, para os respectivos tratamentos controle, MPDR e MNPDR. A suplementação com MPDR não alterou a produção de leite, porém melhorou a sua composição no início da lactação.

Digestibilidade aparente da matéria seca, matéria orgânica e energia bruta e nutrientes digestíveis totais de uma ração completa para bovinos de diferentes grupos genéticos

Avaliou-se a digestibilidade da matéria seca (DMS), matéria orgânica (DMO) e energia bruta (DEB) e os nutrientes digestíveis totais (NDT) de uma ração completa, composta por 44,3% de feno de capim-braquiaria, 55% de concentrado e 0,7% de mistura mineral, fornecida a bovinos de diferentes grupos genéticos (Gir, Nelore, Guzerá, Santa Gertrudis e Caracu), pelas metodologias de coleta total de fezes e com indicador interno (lignina em detergente ácido -- LDA), em delineamento inteiramente casualizado, com três repetições por grupo genético, com análise de variância individual dentro de cada metodologia e uma análise de correlação entre as metodologias. As correlações foram médias ( 0,47 a 0,51) e significativas (P<0,0602; P<0,0697; P<0,0747; P<0,0522), respectivamente, para DMS, DMO, DEB e para NDT. A recuperação do indicador (95,06%) foi semelhante entre os grupos genéticos. Não houve diferença entre grupos genéticos para DMS, DMO, DEB e nos valores de NDT pelas metodologias de coleita total de fezes e com LDA, com médias de 53,31 e 50,33; 55,16 e 52,25; 52,22 e 49,20; e 53,39 e 50,61%, respectivamente. Assim, a LDA foi eficiente na estimativa da digestibilidade, em função de sua adequada recuperação. Os nutrientes foram utilizados de forma semelhante pelos grupos genéticos.