Las Redes de Petri Interpretadas en el Diagnóstico de Fallos de Sistemas Híbridos. Aplicación a un Helicóptero no Tripulado

La seguridad y fiabilidad de los procesos industriales son la principal preocupación de los ingenieros encargados de las plantas industriales. Por lo tanto, desde un punto de vista económico, el objetivo principal es reducir el costo del mantenimiento, el tiempo de inactividad y las pérdidas causadas por los fallos. Por otra parte, la seguridad de los operadores, que afecta a los aspectos sociales y económicos, es el factor más relevante a considerar en cualquier sistema Debido a esto, el diagnóstico de fallos se ha convertido en un foco importante de interés para los investigadores de todo el mundo e ingenieros en la industria. Los principales trabajos enfocados en detección de fallos se basan en modelos de los procesos. Existen diferentes técnicas para el modelado de procesos industriales tales como máquinas de estado, árboles de decisión y Redes de Petri (RdP). Por lo tanto, esta tesis se centra en el modelado de procesos utilizando redes de petri interpretadas. Redes de Petri es una herramienta usada en el modelado gráfico y matemático con la habilidad para describir información de los sistemas de una manera concurrente, paralela, asincrona, distribuida y no determinística o estocástica. RdP son también una herramienta de comunicación visual gráfica útil como lo son las cartas de flujo o diagramas de bloques. Adicionalmente, las marcas de las RdP simulan la dinámica y concurrencia de los sistemas. Finalmente, ellas tienen la capacidad de definir ecuaciones de estado específicas, ecuaciones algebraicas y otros modelos que representan el comportamiento común de los sistemas. Entre los diferentes tipos de redes de petri (Interpretadas, Coloreadas, etc.), este trabajo de investigación trata con redes de petri interpretadas principalmente debido a características tales como sincronización, lugares temporizados, aparte de su capacidad para procesamiento de datos. Esta investigación comienza con el proceso para diseñar y construir el modelo y diagnosticador para detectar fallos definitivos, posteriormente, la dinámica temporal fue adicionada para detectar fallos intermitentes. Dos procesos industriales, concretamente un HVAC (Calefacción, Ventilación y Aire Acondicionado) y un Proceso de Envasado de Líquidos fueron usados como banco de pruebas para implementar la herramienta de diagnóstico de fallos (FD) creada. Finalmente, su capacidad de diagnóstico fue ampliada en orden a detectar fallos en sistemas híbridos. Finalmente, un pequeño helicóptero no tripulado fue elegido como ejemplo de sistema donde la seguridad es un desafío, y las técnicas de detección de fallos desarrolladas en esta tesis llevan a ser una herramienta valorada, desde que los accidentes de las aeronaves no tripuladas (UAVs) envuelven un alto costo económico y son la principal razón para introducir restricciones de volar sobre áreas pobladas. Así, este trabajo introduce un proceso sistemático para construir un Diagnosticador de Fallos del sistema mencionado basado en RdR Esta novedosa herramienta es capaz de detectar fallos definitivos e intermitentes. El trabajo realizado es discutido desde un punto de vista teórico y práctico. El procedimiento comienza con la división del sistema en subsistemas para seguido integrar en una RdP diagnosticadora global que es capaz de monitorear el sistema completo y mostrar las variables críticas al operador en orden a determinar la salud del UAV, para de esta manera prevenir accidentes. Un Sistema de Adquisición de Datos (DAQ) ha sido también diseñado para recoger datos durante los vuelos y alimentar la RdP diagnosticadora. Vuelos reales realizados bajo condiciones normales y de fallo han sido requeridos para llevar a cabo la configuración del diagnosticador y verificar su comportamiento. Vale la pena señalar que un alto riesgo fue asumido en la generación de fallos durante los vuelos, a pesar de eso esto permitió recoger datos básicos para desarrollar el diagnóstico de fallos, técnicas de aislamiento, protocolos de mantenimiento, modelos de comportamiento, etc. Finalmente, un resumen de la validación de resultados obtenidos durante las pruebas de vuelo es también incluido. Un extensivo uso de esta herramienta mejorará los protocolos de mantenimiento para UAVs (especialmente helicópteros) y permite establecer recomendaciones en regulaciones. El uso del diagnosticador usando redes de petri es considerado un novedoso enfoque. ABSTRACT Safety and reliability of industrial processes are the main concern of the engineers in charge of industrial plants. Thus, from an economic point of view, the main goal is to reduce the maintenance downtime cost and the losses caused by failures. Moreover, the safety of the operators, which affects to social and economic aspects, is the most relevant factor to consider in any system. Due to this, fault diagnosis has become a relevant focus of interest for worldwide researchers and engineers in the industry. The main works focused on failure detection are based on models of the processes. There are different techniques for modelling industrial processes such as state machines, decision trees and Petri Nets (PN). Thus, this Thesis is focused on modelling processes by using Interpreted Petri Nets. Petri Nets is a tool used in the graphic and mathematical modelling with ability to describe information of the systems in a concurrent, parallel, asynchronous, distributed and not deterministic or stochastic manner. PNs are also useful graphical visual communication tools as flow chart or block diagram. Additionally, the marks of the PN simulate the dynamics and concurrence of the systems. Finally, they are able to define specific state equations, algebraic equations and other models that represent the common behaviour of systems. Among the different types of PN (Interpreted, Coloured, etc.), this research work deals with the interpreted Petri Nets mainly due to features such as synchronization capabilities, timed places, apart from their capability for processing data. This Research begins with the process for designing and building the model and diagnoser to detect permanent faults, subsequently, the temporal dynamic was added for detecting intermittent faults. Two industrial processes, namely HVAC (Heating, Ventilation and Air Condition) and Liquids Packaging Process were used as testbed for implementing the Fault Diagnosis (FD) tool created. Finally, its diagnostic capability was enhanced in order to detect faults in hybrid systems. Finally, a small unmanned helicopter was chosen as example of system where safety is a challenge and fault detection techniques developed in this Thesis turn out to be a valuable tool since UAVs accidents involve high economic cost and are the main reason for setting restrictions to fly over populated areas. Thus, this work introduces a systematic process for building a Fault Diagnoser of the mentioned system based on Petri Nets. This novel tool is able to detect both intermittent and permanent faults. The work carried out is discussed from theoretical and practical point of view. The procedure begins with a division of the system into subsystems for further integration into a global PN diagnoser that is able to monitor the whole system and show critical variables to the operator in order to determine the UAV health, preventing accidents in this manner. A Data Acquisition System (DAQ) has been also designed for collecting data during the flights and feed PN Diagnoser. Real flights carried out under nominal and failure conditions have been required to perform the diagnoser setup and verify its performance. It is worth noting that a high risk was assumed in the generation of faults during the flights, nevertheless this allowed collecting basic data so as to develop fault diagnosis, isolations techniques, maintenance protocols, behaviour models, etc. Finally, a summary of the validation results obtained during real flight tests is also included. An extensive use of this tool will improve preventive maintenance protocols for UAVs (especially helicopters) and allow establishing recommendations in regulations. The use of the diagnoser by using Petri Nets is considered as novel approach.

El vidrio y sus máscaras : el sueño de la arquitectura de cristal

Según Heidegger, la esencia de la arquitectura, de la construcción, descansa en un no espacio: en la materia con que se construyen las fronteras que otorgan espacios, irradiando sobre ellos aquello que los caracteriza. Si hay alguna materia, de las utilizadas por la arquitectura a lo largo de su historia para construir fronteras, que haya mantenido una especial relación con la luz y la visión, dando un carácter inconfundible a los espacios aviados por ellas, esta es el vidrio; algunas de las etimologías de su nombre: zakû (ser claro), hyalos (diáfano) o vitrum (ver), así lo evidencian. Posiblemente, sea la pregnancia de este modo fascinante de relacionarse con la luz, la que ha hecho del vidrio, a lo largo del tiempo que lleva siendo usado en arquitectura, y aún antes, el material que ha provocado en el imaginario humano la ilusión de ser aquel en que, en último término, podrían llegar a sublimarse todos los demás, dando lugar con ello a lo que en la tesis hemos denominado el sueño de la arquitectura de cristal. Siendo la luz, siempre, energía, consideraremos en la tesis luz-energía, a aquella que ilumina y calienta; es una luz científica y mesurable. Cuando la luz se “hace visible”, desvelando un mensaje “contenido” en el vidrio, hablaremos de luz-información. Esta luz, no puede medirse científicamente. La luz-energía y la luz-información, se manifiestan al conjuro de la arquitectura de vidrio. Es la segunda la que ha conformado las fronteras de vidrio enmascarado, y la que se estudia con más detenimiento en la tesis. Los distintos modos de usar en arquitectura la infinita combinatoria de las propiedades de absortancia, reflectancia, transmitancia y translucencia del vidrio, ha condicionado al hombre en su manera de “ver” el mundo. Unas veces, “inmerso” en él, puesto que solo lo separa del mismo, una frontera transparente, y “deseadamente” invisible: ese modo de usar el vidrio, ha sido el sueño imposible de una parte importante de la arquitectura del siglo XX. Otras veces, para “aislarse” de él, el hombre ha manipulado la luz y el vidrio para construir mundos diferentes. Las fronteras de vidrio enmascarado de color, mosaicos, vidrieras, pantallas y lo que hemos llamado vidrios complejos (con un cometido similar al que Schiller atribuía al coro en la tragedia griega, aislar a esta del “mundo real”, para mantener su libertad poética), son las fronteras que han construido el sueño posible de la arquitectura de cristal. Ambas actitudes, en distintos momentos de la historia de la arquitectura, han sido dos formas de querer materializar un mismo sueño. La capacidad del vidrio para adaptarse a tantos modos de presentarse ante nosotros, y a poder ser interpretado de tantas formas diferentes, es la que ha servido para dar título a la tesis, pues hasta en su faceta más transparente, el vidrio, de una forma o de otra, se ha mostrado siempre como un material enmascarado en el más amplio sentido de la palabra: se enmascara, incluso cuando apela a la transparencia o se convierte en espejo, para hacernos caer en la ilusión de que no está presente. Cuando el hombre construyó fronteras de vidrio e incluso antes, cuando soñó que con él podría llegar a construirlas, condensó en ellas toda la mítica, la mística y la epistemología en torno a la luz y la visión, dando lugar a una serie de arquetipos arquitectónicos. En la iglesia bizantina, la luz sobre, o la luz desde, los mosaicos, construyó una frontera titilante; y en la catedral gótica, la luz a través de las vidrieras construyó una frontera radiante; en ambos casos con el fin de alcanzar anagógicamente lo Inteligible. En el siglo XIX, con el descubrimiento de la electricidad y su incorporación a la arquitectura, las fronteras se vuelven fulgurantes, aviando, en este caso, el espacio urbano. Poco antes, en este mismo siglo, el espíritu del gótico tiene un efímero resurgir del que se nutrirá, a comienzos del siglo XX, el expresionismo cristalino, en el que la luz anagógica se hace laica. El espacio urbano fulgurante prefigurado por este movimiento y presente en las ciudades desde principios del siglo XX, fue potenciado a mediados de ese siglo con la aparición de las pantallas, extendiéndose desde entonces, imparable, por todo el planeta. La reciente emergencia de los vidrios complejos, ha abierto la posibilidad de construir fronteras a la carta (de vidrios de propiedades múltiples, seleccionadas de forma voluntaria y variable en cada momento). En principio, se pensó que, el uso de estos vidrios como cerramiento, podría llegar a constituirse como la panacea de los problemas del material relacionados con la luz-energía, sin necesidad de recurrir a “prótesis”, y manteniendo por tanto la seductora tersura de la fachada; aunque parece que, por ahora, esa posibilidad es, cuando menos, lejana. Sin embargo, en el campo de las megapantallas urbanas (y ,en general, en el de las pantallas de información), ubicuas actualmente en nuestras vidas, los vidrios complejos ayudan a construir los espesos velos de ilusión, que según Lefebvre sirven para mantener el capitalismo, siendo el último estadio de un desarrollo tecnológico, impuesto por el principio de economía del hombre, que como un metrónomo inexorable, y a modo de contrapunto, ha acompañado siempre (de nuevo en palabras de Lefebvre), a la necesidad del gasto, del juego, de la lucha, del arte, de la fiesta. La tecnología y el arte forman parte de la cultura producida por la sociedad y como señala Lévi-Strauss, esa cultura imprime orden; por el contrario, la sociedad, entendida como el conjunto de relaciones que los hombres mantienen entre sí, produce desorden. Del equilibrio entre esos extremos, surge el progreso, incluido el de la arquitectura. Las fronteras de vidrio que analizamos en la tesis –que avían espacios para la espiritualidad, el fasto y el espectáculo o, desde otro punto de vista, para las distintas manifestaciones del poder: la iglesia, la monarquía, el estado o el mercado– también han surgido de esa concomitancia entre el desorden y el orden; y forma parte de ese desorden, la aventura que ha impulsado al genio individual de místicos, alquimistas, geómetras, abades, reyes, inventores, poetas y arquitectos, a explorar, como escribe Apollinaire, vastos y extraños territorios donde el misterio en flor, se ofrece a quien quiera cogerlo, hogueras nuevas de colores nunca vistos, mil fantasmas imponderables a los que dar cuerpo. ABSTRACT According to Heidegger, the essence of architecture, building, lies in a non-space: the material that creates the boundaries from which something begins its presencing, radiating onto them that which characterizes them. If there is any single material amongst all those used throughout the history of architecture to build boundaries which has maintained a special relationship with light and vision, which has bestowed a distinctive character on spaces avid for them, it is glass. This is evidenced in some of its etymologies: zakû (to be clear), hyalos (transparent), vitrum (see). The rich potential of this fascinating way of relating to light in the history of the architectural use of glass, and even before, is possibly what has triggered the illusion in human imagination of being something that can ultimately sublimate all others, giving rise to what in this thesis we call The Dream of Crystal Architecture. Given that light is always energy, in this thesis we consider energy-light to be that which illuminates and warms. This is scientific, measurable light. When light "becomes visible" and reveals a message “contained” in glass, we speak of information-light. This light cannot be measured scientifically. Energy-light and information-light are manifested under the spell of glass architecture. The latter is what has shaped the boundaries of coloured glass, which is studied in this thesis. Architecture's different ways of using the infinite combinations of the absorptance, reflectance, transmittance and translucency of glass has affected the way we humans "see" the world. Sometimes we are "immersed" in it, since only an invisible, transparent boundary separates us from it: this use of glass has characterized a considerable part of 20th century architecture. In other cases, in order to "isolate" us from it, we have manipulated light and glass to build different worlds: the boundaries of glass "masked" by colour, mosaics, stained glass, screens and what we have called complex glazing, which plays a similar role to what Schiller attributed to the chorus in Greek tragedy, isolating it from the "real world" in order to maintain its poetic license. These are the boundaries that have built the viable dream of crystal architecture. These two approaches have been different ways of making same dream come true at different times in the history of architecture. The ability of glass to adapt to so many forms of manifestation, and interpretation, is what has given rise to the title of the thesis. Even in its most transparent facet, glass has one way or another always been a masking material in the broadest sense of the word: it is masked even when it invites transparency or becomes a mirror, triggering the illusion that it is not present. When man began to build glass boundaries, and even before, when he dreamed that he could build them, he condensed in them all the mythology, mysticism and epistemology concerning light and vision, which gave rise to a series of architectural archetypes. In the Byzantine church, light on or from mosaics created tenuous boundaries. In Gothic cathedrals, the light through the stained glass windows constructed radiant boundaries. In both cases the aim was to achieve, in an anagogical way, the Intelligible. In the 19th, the discovery of electricity and its use in architecture led to the production of dazzling boundaries, in this case employed in urban spaces. Earlier in the same century, the Gothic spirit had a short-lived revival, which in the early 20th century drew from crystalline expressionism in which anagogic light became secular. The dazzling urban space prefigured by this movement, present in cities since the early 20th century, was intensified in the mid-century with the emergence of screens, and since then it has spread unstoppably across the world. The recent emergence of complex glasses has made it possible to build boundaries on demand in glass with multiple properties, chosen at will and at whim at any time. Initially it was thought that the use of this glass as a wall could eventually become the panacea for the material problems related to energy-light, without needing to resort to "prosthesis" and thereby maintain the seductive smoothness of the facade. For now, that possibility seems remote, to say the least. In the realm of urban megascreens and information screens in general, now ubiquitous in our lives, complex glasses help to build the thick veils of illusion which, according to Lefebvre, serve to maintain capitalism. Like an inexorable metronome, in counterpoint, this ultimate state of technological development imposed by man's principle of economy has in fact always accompanied (again in the words of Lefebvre), the need to spend, play, fight, art, and party. Technology and art are part of the culture produced by society. As Levi-Strauss says, this culture imposes order. On the contrary, society, understood as a set of relationships amongst people, produces disorder. Progress, including that of architecture, arises from the balance between these two extremes. The glass boundaries analyzed in this thesis, which propitiate spaces for spirituality, pomp and spectacle or, from a different perspective, for the various manifestations of power: the church, the monarchy, the state and the market, have also emerged from the concomitance of order and disorder. One aspect of this disorder is the adventure that has inspired the individual genius of mystics, alchemists, surveyors, abbots, kings, inventors, poets and architects to explore, as Apollinaire says, vast, strange domains where flowering mystery offers itself to whoever wishes to pluck it, new fires, colours you have never seen before, a thousand intangible phantasms still awaiting reality.

Genetic and root phenotype diversity in Sri Lankan rice landraces may be related to drought resistance

Acknowledgements Mayuri Munasinghe was supported by a Commonwealth Scholarship (ref no. LKCS-2009-384). The development and use of the SNP chip was funded by a BBSRC grant BB/J003336/1. The authors thank Owen Price (University of Wollongong, Australia) for producing the coloured province map of Sri Lanka, Gareth Norton (Aberdeen) for merging the RDP1 SNP data with the Sri Lankan data and Tony Travis (Aberdeen) for help with PCA.

Organic protomolecule assembly in igneous minerals

C—H stretching bands, νCH, in the infrared spectrum of single crystals of nominally high purity, of laboratory-grown MgO, and of natural upper mantle olivine, provide an “organic” signature that closely resembles the symmetrical and asymmetrical C—H stretching modes of aliphatic —CH2 units. The νCH bands indicate that H2O and CO2, dissolved in the matrix of these minerals, converted to form H2 and chemically reduced C, which in turn formed C—H entities, probably through segregation into defects such as dislocations. Heating causes the C—H bonds to pyrolyze and the νCH bands to disappear, but annealing at 70°C causes them to reappear within a few days or weeks. Modeling dislocations in MgO suggests that the segregation of C can lead to Cx chains, x = 4, with the terminal C atoms anchored to the MgO matrix by bonding to two O−. Allowing H2 to react with such Cx chains leads to [O2C(CH2)2CO2] or similar precipitates. It is suggested that such Cx—Hy—Oz entities represent protomolecules from which derive the short-chain carboxylic and dicarboxylic and the medium-chain fatty acids that have been solvent-extracted from crushed MgO and olivine single crystals, respectively. Thus, it appears that the hard, dense matrix of igneous minerals represents a medium in which protomolecular units can be assembled. During weathering of rocks, the protomolecular units turn into complex organic molecules. These processes may have provided stereochemically constrained organics to the early Earth that were crucial to the emergence of life.

Organização e dinâmica psíquica na obesidade infantil

Instrumentos de avaliação psicológica constituem-se em métodos sistemáticos de investigação e de compreensão de componentes estruturais e funcionais do comportamento humano, com diversificados objetivos e estratégias técnicas, respeitando-se especificidades das etapas do desenvolvimento. Em processos de avaliação psicológica de características da personalidade, os métodos projetivos, como o Método de Rorschach e o Desenho da Figura Humana, são recursos amplamente utilizados, contribuindo para a compreensão e elaboração de intervenções terapêuticas em variados campos de aplicação, como na área da obesidade infantil. Nesse contexto, este trabalho teve por objetivo identificar e comparar características psicológicas de crianças com obesidade em relação a eutróficas, a partir de métodos projetivos de investigação da personalidade. Foram examinadas 60 crianças de sete a 11 anos de idade, sendo 30 crianças diagnosticadas como obesas e em tratamento específico para o transtorno (Grupo 1 - G1) e 30 crianças com peso normal (Grupo 2 - G2), sem atraso acadêmico, sem limites cognitivos e sem histórico de outras doenças físicas. Os participantes de G1 foram recrutados em instituições de saúde voltadas ao tratamento da obesidade infantil e G2 foi constituído a partir de parceria estabelecida com instituição de ensino bem como a partir de contatos informais da pesquisadora e de seu grupo de pesquisa (técnica da \"bola de neve\"), buscando-se balanceamento dos grupos por sexo e idade. Os seguintes instrumentos de avaliação psicológica foram aplicados individualmente nas crianças: Teste das Matrizes Progressivas Coloridas de Raven (critério de seleção de participantes, incluindo-se na amostra apenas crianças com resultados intelectuais médios ou superiores), o Desenho da Figura Humana e o Método de Rorschach (Escola Francesa). Os pais das crianças participantes responderam ao Questionário de Capacidades e Dificuldades (SDQ) para caracterização da amostra. Os resultados foram examinados conforme padronização específica dos respectivos manuais técnicos dos instrumentos, realizando-se análises descritivas e inferenciais, a fim de examinar possíveis associações entre variáveis clínicas e demográficas e indicadores de características de personalidade das crianças. Foram efetuadas análises correlacionais entre resultados no DFH e no Rorschach, considerando também a classificação nutricional da criança. Os achados permitem compreender características do funcionamento psíquico envolvidas na obesidade infantil, de modo a favorecer estratégias futuras de intervenção terapêutica com crianças. (CAPES)

Colour changes by laser irradiation of reddish building limestones

We have used X-ray photoelectron spectroscopy (XPS) as a novel method to investigate the causes of colour changes in a reddish limestone under irradiation by a Q-switched Nd:YAG 1064 nm laser. We irradiated clean dry and wet surfaces of Pidramuelle Roja, a building stone frequently used in the Asturian heritage, at fluences ranging from 0.12 to 1.47 J cm−2. We measured the colour coordinates and undertook XPS analysis of the state of oxidation of iron both before and after irradiation. Visible colour changes and potential aesthetic damage occurred on dry surfaces from a fluence of 0.31 J cm−2, with the stone showing a greening effect and very intense darkening. The colour change on dry surfaces was considerably higher than on wet surfaces, which at the highest fluence (1.47 J cm−2) was also above the human visual detection threshold. The use of XPS demonstrated that the change in colour (chroma and hue) is associated with a reduction in the iron oxidation state on dry surfaces during laser irradiation. This points out to a potential routinary use of XPS to analyse causes of colour changes during laser cleaning in other types of coloured building stones.

Rome, Italy, 1887 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan of Rome 1887 : the ancient monuments, the gates, and the other important places are coloured red; the numbers correspond with those in the accompanying lists. It was published in [1887]. Scale [1:9,000]. Covers Rome, Italy and Vatican City. Map in English with Italian place names.The image inside the map neatline is georeferenced to the surface of the earth and fit to the "European Datum 1950 UTM Zone 33N" coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map.This map shows features such as roads, railroads, drainage, built-up areas and selected buildings, walls, gates, fortification, ground cover, and more. Relief is shown by hachures. Includes indexes.This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Landfill Leachate Toxicity to Oncorhynchus mykiss (Rainbow Trout) at the Merrick Landfill

At the Merrick Landfill, located outside of North Bay (Ontario, CA), an investigation into the potential for an environmental impact to the Little Sturgeon River as a result of landfill leachate discharge was undertaken using toxicity testing using 96 hour acute lethality on Oncorhynchus mykiss (Rainbow Trout). Landfill leachate may present a risk to receiving environments as it is comprised of an array of chemicals including organics, ammonia, and metals. Testing was conducted in three phases, firstly testing was completed on site throughout an existing natural attenuation zone where the presence of several groundwater seeps down gradient of the site had been identified to determine the effectiveness of the existing leachate control features at reducing the environmental risks. These tests indicated that the existing capture strategies were largely effective at reducing toxicity risks to the receiving environment. Testing was also completed on two pilot-scale hybrid-passive treatment systems to determine their effectiveness for leachate treatment. Summer performance of a constructed gravel wetland system was also shown to be effective at reducing the toxicity of the landfill leachate at the site. Lastly in order to support evaluation of leachate treatment requirements, a toxicity identification evaluation (TIE) was performed to determine the principle cause of toxicity within the leachate. Based on water chemistry analyses of samples collected at various locations at the site, the TIE identified ammonia toxicity as the primary source of toxicity in the leachate, with a secondary focus on metal toxicity.

Surgical exposures and options for instrumentation in acetabular fracture fixation: Pararectus approach versus the modified Stoppa.

BACKGROUND As an alternative to the modified Stoppa approach, the Pararectus approach is used clinically for treatment of acetabular fractures involving the anterior column. The current study assessed the surgical exposure and the options for instrumentation using both of these approaches. METHODS Surgical dissections were conducted on five human cadavers (all male, mean age 88 years (82-97)) using the modified Stoppa and the Pararectus approach, with the same skin incision length (10cm). Distal boundaries of the exposed bony surfaces were marked using a chisel. After removal of all soft-tissues, distances from the boundaries in the false and true pelvis were measured with reference to the pelvic brim. The exposed bone was coloured and calibrated digital images of each inner hemipelvis were taken. The amount of exposed surface using both approaches was assessed and represented as a percentage of the total bony surface of each hemipelvis. For instrumentation, a suprapectineal quadrilateral buttress plate was used. Screw lengths were documented, and three-dimensional CT reconstructions were performed to assess screw trajectories qualitatively. Wilcoxon's signed rank test for paired groups was used (level of significance: p<0.05). RESULTS After utilization of the Pararectus approach, the distances from the farthest boundaries of exposed bone towards the pelvic brim were significantly higher in the false but not the true pelvis, compared to the modified Stoppa approach. The percentage (mean±SD) of exposed bone accessible after utilizing the Pararectus approach was 42±8%, compared to 29±6% using the modified Stoppa (p=0.011). In cadavers exposed by the Pararectus approach, screws placed for posterior fixation and as a posterior column screw were longer by factor 1.8 and 2.1, respectively (p<0.05), and screws could be placed more posteromedial towards the posterior inferior iliac spine or in line with the posterior column directed towards the ischial tuberosity. CONCLUSION Compared to the modified Stoppa, the Pararectus approach facilitates a greater surgical access in the false pelvis, provides versatility for fracture fixation in the posterior pelvic ring and allows for the option to extend the approach without a new incision.

Chlorophyll catabolism and gene expression in the peel of ripening banana fruits

The biochemical and molecular basis of chlorophyll (Chl) catabolism in bananas was investigated during ripening at 20°C and at an elevated temperature (35°C) where degreening is inhibited. Biochemical analysis showed that Chl breakdown products could be isolated from fruit ripened at both temperatures. The coloured breakdown products, chlorophyllide and pheophorbide, were not detected at any stage of ripening in the two treatments; however, a non-fluorescent Chl catabolite accumulated to a higher concentration at 20 than at 35°C. To investigate the ripening-related gene expression associated with these changes, a cDNA library was generated from the peel of fruit ripened at 20°C. Differential screening of this library produced 20 non-redundant families of clones including those encoding enzymes involved in ethylene biosynthesis, respiration, starch metabolism, cell wall degradation and other metabolic events. The expression of these genes was followed by northern analysis in fruit ripened at 20 and 35°C.

Identity construction through phonetic crossing among young Capetonian gang members

Uncountable gangs operate in post-Apartheid South Africa, particularly in greater Cape Town, competing over turf and controlling the drug trade. Consequently, gang violence is rife in Western Cape and especially widespread in urban areas. In this paper young Capetonians’ narratives of gang violence are analyzed. In the narratives of attacks on Black or White South Africans by Coloured gang members, the Coloured narrators make use of their victims’ varieties of English, more precisely, of phonetic features. Hence, the aggressors do language crossing towards their targets when narrating their feats. Rampton (1995a:485) considers language crossing a ‘code alternation by people who are not accepted members of the group associated with the second language that they are using (code switching into varieties that are not generally thought to belong to them)’. This switching involves a transgression of social or ethnic boundaries that allows the young gangsters to construct, negotiate, uphold and manage their social identities, as language still functions as an utterly important identity marker in post-Apartheid South Africa.

Geochemistry and stable isotope record of black shales and inoceramids from the Demerara Rise

The bulk rock geochemistry and inoceramid isotopic composition from Cenomanian to Santonian, finely laminated, organic-rich black shales, recovered during Ocean Drilling Program Leg 207 on Demerara Rise (western tropical North Atlantic), suggest persistent anoxic (free H2S) conditions within the sediments and short-term variations within a narrow range of anoxic to episodically dysoxic bottom waters over a ~15 Ma time interval. In addition to being organic-rich, the 50-90 m thick sections examined exhibit substantial bulk rock enrichments of Si, P, Ba, Cu, Mo, Ni, and Zn relative to World Average Shale. These observations point to high organic burial fluxes, likely driven by high primary production rates, which led to the establishment of intensely sulfidic pore waters and possibly bottom waters, as well as to the enrichments of Cr, Mo, U, and V in the sediments. At the same time, the irregular presence of benthic inoceramids and foraminifera in this facies demonstrates that the benthic environment could not have been continuously anoxic. The d13C and d15N values of the inoceramid shell organics provide no evidence of chemosymbiosis and are consistent with pelagic rain as being a significant food source. Demerara Rise inoceramids also exhibit well-defined, regularly spaced growth lines that are tracked by d13C and d18O variations in shell carbonate that cannot be simply explained by diagenesis. Instead, productivity variations in surface waters may have paced the growth of the shells during brief oxygenation events suitable for benthic inoceramid settlement. These inferences imply tight benthopelagic coupling and more dynamic benthic conditions than generally portrayed during black shale deposition. By invoking different temporal scales for geochemical and paleontological data, this study resolves recent contradictory conclusions (e.g., sulfidic sedimentary conditions versus dysoxic to suboxic benthic waters) drawn from studies of either sediment geochemistry or fossil distributions alone on Demerara Rise. This variability may be relevant for discussions of black shales in general.

Compte-rendu de la situation morale et matérielle de la colonie Icarienne, du mois d'août 1857 au mois de février 1858.

With the original coloured wrappers.

A scripture catechism, for the instruction of children and servants /

Includes publisher's advertisement on lower cover.

Views on the Hudson.

Advertisement "T. Nelson and Sons' American views" on verso of p. 15.