Protein Adsorption onto Polyelectrolyte Layers: Effects of Protein Hydrophobicity and Charge Anisotropy

Ellipsometry was used to investigate the influence of ionic strength (I) and pH on the adsorption of bovine serum albumin (BSA) or beta-lactoglobulin (BLG) onto preabsorbed layers of two polycations: poly(diallyldimethylammonium chloride) (PDADMAC) or poly(4-vinylpyridine bromide) quaternized with linear aliphatic chains of two (QPVP-C2) or five (QPVP-C5) carbons. Comparisons among results for the three polycations reveal hydrophobic interactions, while comparisons between BSA and BLG-proteins of very similar isoelectric points (pI)-indicate the importance of protein charge anisotropy. At pH close to pI, the ionic strength dependence of the adsorbed amount of protein (Gamma) displayed maxima in the range 10 < I < 25 mM corresponding to Debye lengths close to the protein radii. Visualization of protein charge by Delphi suggested that these ionic strength conditions corresponded to suppression of long-range repulsion between polycations and protein positive domains, without diminution of short-range attraction between polycation segments and locally negative protein domains, in a manner similar to the behavior of PE-protein complexes in solution.(1-4) This description was consistent with the disappearance of the maxima at pH either above or below pI. In the former case, Gamma values decrease exponentially with I(1/2), due to screening of attractions, while in the latter case adsorption of both proteins decreased at low I due to strong repulsion. Close to or below pI both proteins adsorbed more strongly onto QPVP-C5 than onto QPVP-C2 or PDADMAC due to hydrophobic interactions with the longer alkyl group. Above pI, the adsorption was more pronounced with PDADMAC because these chains may assume more loosely bound layers due to lower linear charge density.

Lysozyme binding to poly(4-vinyl-N-alkylpyridinium bromide)

The adsorption behavior of polycations at ionic strengths (1) ranging from 0.001 to 0.1 onto silicon wafers was studied by means of ellipsometry, contact angle measurements and atomic force microscopy (AFM). Polycations chosen were bromide salts of poly(4-vinylpyridine) N-alkyl quaternized with linear aliphatic chains of 2 and 5 carbon atoms, QPVP-C2 and QPVP-C5, respectively. Under 1 0.001 the reduction of screening effects led to low adsorbed amounts of QPVP-C2 or QPVP-C5 (1.0 +/- 0.1 mg/m(2)), arising from the adsorption of extended chains. Upon increasing l to 0.1, screening effects led to conformational changes of polyelectrolyte chains ill Solution and to higher adsorbed amount values (1.9 +/- 0.2 mg/m(2)). Advancing contact angle theta(a) measurements performed with water drops onto QPVP-C2 and QPVP-C5 adsorbed layers varied from (45 +/- 2)degrees to (50 +/- 5)degrees, evidencing the exposure of both hydrophobic alkyl groups and charged moieties. The adsorption of lysozyme (LYZ) molecules to QPVP-C5 layers was more pronounced than to QPVP-C2 films. Antimicrobial effect of LYZ bound to QPVP-C2 or QPVP-C5 layers or to Si wafers was evaluated with enzymatic assays using Micrococcus luteus as Substrates. The adsorption behavior of QPVP-C2 and QPVP-C5 at the water-air interface was studied by means Of surface tension measurements. Only QPVP-C5 was able to reduce water Surface tension. Mixtures of LYZ and QPVP-C5 were more efficient in reducing Surface tension than pure LYZ solution, evidencing co-adsorption at liquid-air interface. Moreover, antimicrobial action observed for mixtures of LYZ and QPVP-C5 was more pronounced than that measured for pure LYZ. Hydrophobic interaction between LYZ and QPVP-C5 ill Solution seems to drive the binding and to preserve LYZ secondary structure. (c) 2008 Elsevier Inc. All rights reserved.

Direct detection of underivatized chitooligosaccharides produced through chitinase action using capillary zone electrophoresis

Capillary electrophoresis with capacitively coupled contactless conductivity detection was successfully used to quantify N-acetylglucosamine and five N-acetyl-chitooligosaccharides (C2-C6) produced after reaction with a purified chitinase (TmChi) from Tenebrio molitor (Coleoptera). No derivatization process was necessary. The separation was developed using 10 mM NaOH with 10% (v/v) acetonitrile as background electrolyte and homemade equipment with a system that avoids the harmful effect of electrolysis. The limit of detection for all oligosaccharides was ca. 3 mu M, and the results indicated that the larger the oligosaccharide, the higher the sensitivity. Analysis of the chitooligosaccharides produced revealed that TmChi has an endolytic cleavage pattern with C5 as the best substrate (higher catalytic efficiency k(cat)/K-M) releasing C2 and C3. (c) 2007 Elsevier Inc. All rights reserved.

Spectroscopic and theoretical studies of some 2-ethylsulfinyl-(4 `-substituted)-phenylthioacetates

The analysis of the IR nu(co) bands of the 2-ethylsulfinyl-(4`-substituted)-phenylthioacetates 4`-Y-C(6)H(4)SC(O)CH(2)S(O)Et (Y = NO(2) 1, Cl 2, Br 3, H 4, Me 5, OMe 6) supported by B3LY/6-31G(d,p) calculations along with the NBO analysis for 1.4 and 6 and X-ray analysis for 3, indicated the existence of four gauche (q-g-syn, g(3)-syn. g(1)-atin and q-g(2)-syn) conformers for 1-6 The calculations reproduce quite well the experimental results, i e the computed q-g-syn and g3-syn conformers correspond in the IR spectrum (in solution), to the nu(co) doublet higher frequency component of larger intensity, while the computed grant, conformer correspond to the nu(co) doublet lower frequency component (in solution) NBO analysis showed that the n(s) -> pi(center dot)(c1=o2), no(co) -> sigma(c1-s3), no(co) -> sigma(c1-c4) orbital interactions are the main factors which stabilize the q-g-syn, g(3)-syn, g(1)-anti and q-g(2)-syn conformers for 1, 4 and 6 The no(co) -> sigma(c1-s3) interaction which stabilizes the q-g-syn, g(3)-syn and q-g(2)-syn conformers into a larger extent than the granti conformer, is responsible for the larger tto frequencies of the former conformers relative to the latter one. The q-g-syn, g(3)-syn and q-g(2)-syn conformers are further stabilized sigma(c4-s5) -> pi(co)center dot (strong). pi(co)/sigma(c1-c4,) no(co) -> sigma(c6-H17[Et]) (weak) and pi(co)/sigma(c4-c5) pi(co) (strong) orbital interactions. The q-g-syn conformer is also stabilized by sigma(c4-s5) -> pi(center dot)(co) (strong), pi(co)/sigma(c4-c5).no(co) -> sigma(c6-H17[Et]), pi(C9=C11[ph]) -> sigma(c4-H6x-CH2]) (weak). no((SO)) -> sigma(C11-H23[ph]) (medium) pi(co)/sigma(c4-c5)(strong) orbital interactions. The q-g-syn conformei is further stabilized by the n(S5) O((C))(8-) S((SO))(8+) attractive Coulornbic interaction while the q-g(2)-syn conformer is destabilized by the n55 0,8c-0) repulsive Coulombic interaction. This analysis indicates the following conformer stabilization order. q-g-syn, g(3)-syn > g(1)-anti >> q-g(2)-syn X-ray single crystal analysis of 3 indicates that it assumes in the solid a distorted q-g(2)-syn geometry which is stabilized through almost the same orbital and Coulombic interaction which takes place for the q-g(2)-syn conformer, in the gas, along with dipole moment coupling and a series intermolecular C-HO0 interactions. (C) 2010 Elsevier B V All rights reserved

Studies on chemo- and diastereo-selectivity of the Diels-Alder reactions of sulfinyltoluquinones with cyclopentadiene

Sulfinyltoluquinones (2a-2c) were submitted to thermal or catalyzed [4+2] cycloaddition reactions with cyclopentadiene. For p-tolylsulfinyltoluquinones (2b) and (2c), almost complete C2-C3-chemo- and unlike-diastereoselectivity was achieved by catalysis with ZnBr(2), yielding adducts 6. Under thermal conditions, Diels-Alder reaction took place at the C5-C6 double bonds of quinones 2a-2c, generating mixtures of diastereoisomeric like- and unlike-adducts 4.

Codisposição de resíduos sólidos de serviços de saúde com resíduos sólidos urbanos

O objetivo deste trabalho é estudar a codisposição de resíduos sólidos de serviços de saúde (RSSS) com resíduos sólidos urbanos (RSU), dando ênfase aos microrganismos normalmente encontrados nos RSSS. O trabalho foi desenvolvido em três etapas, julgadas relevantes para o entendimento da codisposição de RSSS com RSU, denominadas de forma geral: Codisposição, Recirculação e Inoculação. A Codisposição foi implementada a partir da montagem de seis células de 70 m3, portanto em escala real, escavadas sobre a Célula 4 do Aterro Sanitário Zona Norte, na cidade de Porto Alegre. As células experimentais foram dispostas lado a lado, apresentando base inferior 2 x 3 m, base superior 7 x 8 m e profundidade 2,5 m. Cada célula recebeu, nesta ordem, cobertura de BIDIM 400, PEAD 2 mm e BIDIM 180. As duas coberturas de BIDIM funcionaram como membranas protetoras da manta de PEAD (impermeabilizante), visando minorar possíveis danos mecânicos determinados principalmente por elementos pérfuro-cortantes. As drenagens dos efluentes líquidos e gasosos de cada célula foram realizadas através de tubos hidráulicos de DN 40 mm, possuindo estes comunicação entre si no interior de cada célula, mas não entre células. Os tubos de saída de gás e lixiviado foram furados em sua superfície para garantir a remoção dos efluentes do interior das células, sendo forrados com BIDIM 400 nas regiões perfuradas para impedir a obstrução dos furos pelo resíduo. As células foram denominadas C1, C2, C3, C4, C5 e C6, diferindo entre si devido às relações de RSSS/RSU que foram utilizadas em seu preenchimento. De C1 a C6, as percentagens de RSU e RSSS foram, respectivamente, (100% e 0%), (95% e 5%), (75% e 25%), (50% e 50%), (25% e 75%) e (0% e 100%). Depois de preenchidas, as células receberam uma camada de argila compactável de 60 cm. Foram analisadas diversas variáveis físicas, químicas e microbiológicas de controle. Na etapa de Recirculação, estudou-se a influência da reposição de todo o lixiviado gerado em uma célula sobre a argila de recobrimento desta mesma célula. Foi estudado ainda o Poder Germinativo de quatro espécies vegetais das quais uma delas viria a ser utilizada para remoção de poluentes do lixiviado recirculado, sendo plantada sobre a superfície superior das células. Foram elas ervilhaca (Vicia sativa), aveia preta (Avena strigosa), alfafa (Medicago sativa) e pensacola (Paspalum notatum), testadas na presença e ausência de lixiviado;. Nesta etapa, foi testada a influência da espécie vegetal ervilhaca (Vicia sativa) – leguminosa de inverno –, plantada na argila, como agente de depuração do lixiviado recirculado. Verificou-se que a utilização desta espécie vegetal não teve influência significativa na remoção de poluentes do lixiviado, nas condições do experimento. A redução das concentrações de poluentes se deveu, portanto, à operação de recirculação. Na etapa denominada Inoculação, foram estudadas as curvas de crescimento de três espécies de microrganismos em lixiviado bruto e esterilizado. Foram utilizados reatores de 1,5 L preenchidos com 1 L de lixiviado esterilizado previamente, sendo inoculadas concentrações conhecidas dos microrganismos Escherichia coli, Pseudomonas aeruginosa e Staphylococcus aureus, separadamente. Para cada microrganismo, foram montados doze reatores: quatro com pH 5, quatro com pH 7 e quatro com pH 9. De cada conjunto de reatores de mesmo pH, três foram inoculados com igual concentração de microrganismos, e um, considerado reator de controle, recebeu somente água deionizada e esterilizada. Desenvolveram-se, como esperado, as curvas de crescimento para as espécies estudadas. A espécie Pseudomonas aeruginosa se adaptou melhor (maior tempo de sobrevivência e concentrações mais elevadas) no pH neutro, enquanto que a espécie Escherichia coli se desenvolveu melhor no pH ácido. No pH 9, ambas as espécies foram inviabilizadas desde a primeira contagem. Para Staphylococcus aureus a concentração reduziu-se drasticamente nas primeiras 24 h para todos os valores de pH. Comparando-se os pH, essa espécie se adaptou melhor no pH neutro e depois no pH ácido. A partir dos estudos desenvolvidos, a codisposição de RSSS com RSU se mostrou uma técnica aceitável.

Mudanças na taxa de juros e mudanças no risco Brasil

A taxa SELIC contribui para a formação do chamado RISCO Brasil ? A resposta a esta questão é o que este trabalho propõe dar. Seguindo uma metodologia para estabelecer a relação entre ambas variáveis, mostra que realmente existem evidências de que variações na taxa SELIC redundam em variações no RISCO Brasil, assim como evidências de feedbach. Na interação entre ambas variáveis, destaca-se ainda o papel das reuniões do COPOM, prováveis geradoras de expectativas e que reforçam o elo entre taxa SELIC e RISCO Brasil

Application of multivariable control using artificial neural networks in a debutanizer distillation column

LOPES, Jose Soares Batista et al. Application of multivariable control using artificial neural networks in a debutanizer distillation column.In: INTERNATIONAL CONGRESS OF MECHANICAL ENGINEERING - COBEM, 19, 5-9 nov. 2007, Brasilia. Anais... Brasilia, 2007

Ticks' response to feeding on host immunized with glandular extracts of Rhipicephalus sanguineus females fed for 2, 4, and 6 days. I. Inactivity or early degeneration of salivary glands?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phosphorus bioavailability in diets for growing horses

A study of phosphorus (P) metabolism was carried out using 12 month old Brasileiro de Hipismo breed of horses to determine the P bioavailability available from feeds commonly fed to horses in Brazil. Five different diets were formulated to contain approximately equivalent levels of crude protein and digestible energy, as well as to supply at least 22 g P/horse/day (NRC, 1989). All 5 diets contained 40% Bermuda coastal hay plus 60% concentrate. The 5 different concentrates contained: C1 (corn+ cottonseed meal) C2 (corn grain+soybean meal) C3 (corn+sugarcane yeast), C4 (oat+cottonseed meal), and C5 (oat+soybean meal). The radioisotope (32)p was injected with 30 NIB. Blood, feces and urine were collected for 7 days to evaluate endogenous fecal P and true absorption. Analysis of variance of P intake showed differences due to dietary effects (P < 0.05). Concentrate C3 had the lowest intake (79.68 mg/ kg BW). All of the diets produced positive P retention. Absolute values for P concentrations in plasma, urine, feces and endogenous feces did not vary between diets. Values for endogenous fecal P were independent of the level of P intake, so the correlation between P intake and P endogenous was not significant. P bioavailability values were 50.75; 40.98; 43.50; 51.03 and 57.68% for diets C1 through C5, respectively. However, differences in P bioavailability were found (P < 0.05) between diets. Diets C2 and C3 had lower P bioavailability than the other diets. The P bioavailability of all dietary treatments in this study exceeded NRC (1989) postulations of 35% true P absorption in diets not supplemented with inorganic P. The results of this study indicate that inorganic P supplementation is not needed for growing yearlings fed common Brazilian feeds. Considering the high cost of P supplementation and the risk of environmental P contamination, inorganic phosphorus supplementation for growing yearlings may not be required. (c) 2007 Elsevier B.V. All rights reserved.

Técnicas de inteligência artificial para a geração dinâmica de set points para uma coluna de destilação

Artificial Intelligence techniques are applied to improve performance of a simulated oil distillation system. The chosen system was a debutanizer column. At this process, the feed, which comes to the column, is segmented by heating. The lightest components become steams, by forming the LPG (Liquefied Petroleum Gas). The others components, C5+, continue liquid. In the composition of the LPG, ideally, we have only propane and butanes, but, in practice, there are contaminants, for example, pentanes. The objective of this work is to control pentane amount in LPG, by means of intelligent set points (SP s) determination for PID controllers that are present in original instrumentation (regulatory control) of the column. A fuzzy system will be responsible for adjusting the SP's, driven by the comparison between the molar fraction of the pentane present in the output of the plant (LPG) and the desired amount. However, the molar fraction of pentane is difficult to measure on-line, due to constraints such as: long intervals of measurement, high reliability and low cost. Therefore, an inference system was used, based on a multilayer neural network, to infer the pentane molar fraction through secondary variables of the column. Finally, the results shown that the proposed control system were able to control the value of pentane molar fraction under different operational situations

Assessment of the In Vivo Genotoxicity of New Lead Compounds to Treat Sickle Cell Disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio

The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50

Influência de tensoativos não iônicos na destilação molecular de petróleo

The molecular distillation is show as an alternative for separation and purification of various kinds of materials. The process is a special case of evaporation at high vacuum, in the order from 0.001 to 0.0001 mmHg and therefore occurs at relatively lower temperatures, preserves the material to be purified. In Brazil, molecular distillation is very applied in the separation of petroleum fractions. However, most studies evaluated the temperature of the evaporator, condenser temperature and flow such variables of the molecular distillation oil. Then, to increase the degree of recovery of the fraction of the distillate obtained in the process of the molecular distillation was evaluated the use nonionic surfactants of the class of nonylphenol ethoxylate, molecules able to interact in the liquid-liquid and liquid-vapor interface various systems. In this context, the aim of this work was to verify the influence of commercial surfactant (Ultranex-18 an Ultranex-18-50) in the molecular distillation of a crude oil. The physicochemical characterization of the oil was realized and the petroleum shown an API gravity of 42°, a light oil. Initially, studied the molecular distillation without surfactant using star design experimental (2H ± ) evaluated two variables (evaporator temperature and condenser temperature) and answer variable was the percentage in distillate obtained in the process (D%). The best experimental condition to molecular distillation oil (38% distillate) was obtained at evaporator and condenser temperatures of 120 °C and 10 ° C, respectively. Subsequently, to determine the range of surfactant concentration to be applied in the process, was determined the critical micellar concentration by the technique of scattering X-ray small angle (SAXS). The surfactants Ultranex-18 an Ultranex-18-50 shown the critical micelle concentration in the range of 10-2 mol/L in the hydrocarbons studied. Then, was applied in the study of distillation a concentration range from 0.01 to 0.15 mol/L of the surfactants (Ultranex- 18 and 50). The use of the nonionic surfactant increased the percentage of hydrocarbons in the range from 5 to 9 carbons in comparison to the process carried out without surfactant, and in some experimental conditions the fraction of light compounds in the distilled was over 700% compared to the conventional process. The study showed that increasing the degree of ethoxylation of Ultranex18 to Ultranex-50, the compounds in the range of C5 to C9 reduced the percentage in the distilled, since the increase of the hydrophilic part of the surfactant reduces its solubility in the oil. Finally, was obtained an increase in the degree of recovery of light hydrocarbons, comparing processes with and without surfactant, obtained an increase of 10% and 4% with Ultranex-18 and Ultranex-50, respectively. Thus, it is concluded that the Ultranex- 18 surfactant showed a higher capacity to distillation compared with Ultranex-50 and the application of surfactant on the molecular distillation from petroleum allowed for a greater recovery of light compounds in distillate

Implantes de resina de poliuretana vegetal (Ricinus communis) na tração linear, fixação e fusão vertebral no cão: estudo experimental

Placa e espaçador de polímero derivado do óleo de mamona (PDOM) (Ricinus communis) foram avaliados clínica, radiográfica e histologicamente na tração linear, fixação e fusão vertebral cervical em 20 cães adultos, sem raça definida, pesando entre 17 e 22kg. Foram sacrificados quatro animais aos 10, 30, 60, 90 e 120 dias de pós-operatório. Após exposição da coluna cervical, por acesso ventral, o disco intervertebral de C4-C5 foi fenestrado e a abordagem ao canal medular foi feita por meio de fenda óssea. Um espaçador de PDOM foi colocado preenchendo o defeito ósseo. Os corpos vertebrais C4-C5 foram fixados com placa do mesmo material, utilizando-se dois parafusos corticais em cada corpo vertebral. Apenas um animal apresentou déficit neurológico no pós-operatório imediato. Radiograficamente as vértebras mostravam-se normais e alinhadas, sem colapso do espaço intervertebral, porém não houve neoformação óssea entre as vértebras. Ao exame mielográfico, não houve compressão da medula espinhal. Os implantes foram efetivos em manter a tração linear e fixação das vértebras cervicais e não ocorreu a fusão vertebral.