Probing neutralino properties in minimal supergravity with bilinear R-parity violation

Supersymmetric models with bilinear R-parity violation can account for the observed neutrino masses and mixing parameters indicated by neutrino oscillation data. We consider minimal supergravity versions of bilinear R-parity violation where the lightest supersymmetric particle is a neutralino. This is unstable, with a large enough decay length to be detected at the CERN Large Hadron Collider. We analyze the Large Hadron Collider potential to determine the lightest supersymmetric particle properties, such as mass, lifetime and branching ratios, and discuss their relation to neutrino properties.

An online data access prediction and optimization approach for distributed systems

Current scientific applications have been producing large amounts of data. The processing, handling and analysis of such data require large-scale computing infrastructures such as clusters and grids. In this area, studies aim at improving the performance of data-intensive applications by optimizing data accesses. In order to achieve this goal, distributed storage systems have been considering techniques of data replication, migration, distribution, and access parallelism. However, the main drawback of those studies is that they do not take into account application behavior to perform data access optimization. This limitation motivated this paper which applies strategies to support the online prediction of application behavior in order to optimize data access operations on distributed systems, without requiring any information on past executions. In order to accomplish such a goal, this approach organizes application behaviors as time series and, then, analyzes and classifies those series according to their properties. By knowing properties, the approach selects modeling techniques to represent series and perform predictions, which are, later on, used to optimize data access operations. This new approach was implemented and evaluated using the OptorSim simulator, sponsored by the LHC-CERN project and widely employed by the scientific community. Experiments confirm this new approach reduces application execution time in about 50 percent, specially when handling large amounts of data.

J/psi production as a function of charged particle multiplicity in pp collisions at root s=7 TeV

The ALICE Collaboration reports the measurement of the relative J/psi yield as a function of charged particle pseudorapidity density dN(ch)/d eta in pp collisions at root s = 7 TeV at the LHC. J/psi particles are detected for p(t) > 0, in the rapidity interval vertical bar y vertical bar < 0.9 via decay into e(+)e(-), and in the interval 2.5 < y < 4.0 via decay into mu(+)/mu(-) pairs. An approximately linear increase of the J/psi yields normalized to their event average (dN(J/psi)/dy)/(dN(J/psi)/dy) with (dN(ch)/c eta)/(dN(ch)/d eta) is observed in both rapidity ranges, where dN(ch)/d eta is measured within vertical bar eta vertical bar < 1 and p(t) > 0. In the highest multiplicity interval with (dN(ch)/d eta)(bin)) = 24.1, corresponding to four times the minimum bias multiplicity density, an enhancement relative to the minimum bias J/psi yield by a factor of about 5 at 2.5 < y <4 (8 at vertical bar y vertical bar < 0.9) is observed. (C) 2012 CERN. Published by Elsevier B.V. All rights reserved.

Light vector meson production in pp collisions at root s=7 TeV ALICE Collaboration

The ALICE experiment has measured low-mass dimuon production in pp collisions at root s = 7 TeV in the dimuon rapidity region 2.5 < y < 4. The observed dimuon mass spectrum is described as a superposition of resonance decays (eta, rho, omega, eta', phi) into muons and semi-leptonic decays of charmed mesons. The measured production cross sections for omega and phi are sigma(omega)(1 < p(t) < 5 GeV/c. 2.5 < y < 4) = 5.28 +/- 0.54(stat) +/- 0.49(syst) mb and sigma(phi)(1 < p(t) < 5 GeV/c. 2.5 < y < 4) = 0.940 +/- 0.084(stat) +/- 0.076(syst) mb. The differential cross sections d(2)sigma/dy dp(t) are extracted as a function of p(t) for omega and phi. The ratio between the rho and omega cross section is obtained. Results for the phi are compared with other measurements at the same energy and with predictions by models. (C) 2012 CERN. Published by Elsevier B.V. All rights reserved.

Studies of Heavy Baryons in DELPHI and Radiation Monitoring in DØ

Between the years 1992 and 1995 about 3.5 million hadronic Z decays were collected by the DELPHI detector at CERN. This data has been used to measure the production and lifetime of the beauty strange baryon Ξb, in the inclusive decay channel Ξb →Ξ-ℓ- X. The Ξ- baryon was reconstructed through the decay Ξ- → Λ π-, using a constrained fit method for cascade decays. An iterative discriminant analysis was used for the Ξb selection. A search for the Ξb baryon was also performed using an alternative method of reconstructing the Ξ- baryon. A measurement of the production of the charmed strange baryon Ξc in the decay channel Ξc → Ξ-π+ using the same data is also presented. The radiation monitoring system of the Silicon Microstrip Tracker in the DØ detector is studied and used to estimate the radiation dose received by the Silicon detector during normal running conditions of the TeVatron accelerator.

Bottle effects, toxicity and cell viability during incubation experiments to asses community respiration

Máster en Oceanografía

Triggers per attività di test su fascio di particelle. Realizzazione di un progetto in VHDL e sintetizzazione su FPGA

Progettazione e realizzazione di un dispositivo elettronico con lo scopo di coordinare e sincronizzare la presa dati del beam test del LUCID (CERN, luglio 2009) e tener traccia di tali eventi. Il circuito è stato progettato in linguaggio VHDL, simulato con il programma ModelSim, sintetizzato con il programma Quartus e implementato su un FPGA Cyclone residente su scheda di tipo VME 6U della CAEN. Infine la scheda è stata testata in laboratorio (verificandone il corretto funzionamento) assieme all'intero sistema di presa dati, e confermata per il beam test del LUCID.

Evaluación de las proteínas de fase aguda en perros infectados por "Dirofilaria immitis"

Programa de doctorado: Clínica e investigación terapéutica

Drift Tubes Trigger System of the CMS Experiment at LHC : Commissioning and Performances

In this thesis the performances of the CMS Drift Tubes Local Trigger System of the CMS detector are studied. CMS is one of the general purpose experiments that will operate at the Large Hadron Collider at CERN. Results from data collected during the Cosmic Run At Four Tesla (CRAFT) commissioning exercise, a globally coordinated run period where the full experiment was involved and configured to detect cosmic rays crossing the CMS cavern, are presented. These include analyses on the precision and accuracy of the trigger reconstruction mechanism and measurement of the trigger efficiency. The description of a method to perform system synchronization is also reported, together with a comparison of the outcomes of trigger electronics and its software emulator code.

Hardware and software development of a multichannel readout board named CARLOSrx for the ALICE experiment

ALICE, that is an experiment held at CERN using the LHC, is specialized in analyzing lead-ion collisions. ALICE will study the properties of quarkgluon plasma, a state of matter where quarks and gluons, under conditions of very high temperatures and densities, are no longer confined inside hadrons. Such a state of matter probably existed just after the Big Bang, before particles such as protons and neutrons were formed. The SDD detector, one of the ALICE subdetectors, is part of the ITS that is composed by 6 cylindrical layers with the innermost one attached to the beam pipe. The ITS tracks and identifies particles near the interaction point, it also aligns the tracks of the articles detected by more external detectors. The two ITS middle layers contain the whole 260 SDD detectors. A multichannel readout board, called CARLOSrx, receives at the same time the data coming from 12 SDD detectors. In total there are 24 CARLOSrx boards needed to read data coming from all the SDD modules (detector plus front end electronics). CARLOSrx packs data coming from the front end electronics through optical link connections, it stores them in a large data FIFO and then it sends them to the DAQ system. Each CARLOSrx is composed by two boards. One is called CARLOSrx data, that reads data coming from the SDD detectors and configures the FEE; the other one is called CARLOSrx clock, that sends the clock signal to all the FEE. This thesis contains a description of the hardware design and firmware features of both CARLOSrx data and CARLOSrx clock boards, which deal with all the SDD readout chain. A description of the software tools necessary to test and configure the front end electronics will be presented at the end of the thesis.

Applications of High Speed Configurable Logic Devices in Modern Particle Physics Experiments

Several activities were conducted during my PhD activity. For the NEMO experiment a collaboration between the INFN/University groups of Catania and Bologna led to the development and production of a mixed signal acquisition board for the Nemo Km3 telescope. The research concerned the feasibility study for a different acquisition technique quite far from that adopted in the NEMO Phase 1 telescope. The DAQ board that we realized exploits the LIRA06 front-end chip for the analog acquisition of anodic an dynodic sources of a PMT (Photo-Multiplier Tube). The low-power analog acquisition allows to sample contemporaneously multiple channels of the PMT at different gain factors in order to increase the signal response linearity over a wider dynamic range. Also the auto triggering and self-event-classification features help to improve the acquisition performance and the knowledge on the neutrino event. A fully functional interface towards the first level data concentrator, the Floor Control Module, has been integrated as well on the board, and a specific firmware has been realized to comply with the present communication protocols. This stage of the project foresees the use of an FPGA, a high speed configurable device, to provide the board with a flexible digital logic control core. After the validation of the whole front-end architecture this feature would be probably integrated in a common mixed-signal ASIC (Application Specific Integrated Circuit). The volatile nature of the configuration memory of the FPGA implied the integration of a flash ISP (In System Programming) memory and a smart architecture for a safe remote reconfiguration of it. All the integrated features of the board have been tested. At the Catania laboratory the behavior of the LIRA chip has been investigated in the digital environment of the DAQ board and we succeeded in driving the acquisition with the FPGA. The PMT pulses generated with an arbitrary waveform generator were correctly triggered and acquired by the analog chip, and successively they were digitized by the on board ADC under the supervision of the FPGA. For the communication towards the data concentrator a test bench has been realized in Bologna where, thanks to a lending of the Roma University and INFN, a full readout chain equivalent to that present in the NEMO phase-1 was installed. These tests showed a good behavior of the digital electronic that was able to receive and to execute command imparted by the PC console and to answer back with a reply. The remotely configurable logic behaved well too and demonstrated, at least in principle, the validity of this technique. A new prototype board is now under development at the Catania laboratory as an evolution of the one described above. This board is going to be deployed within the NEMO Phase-2 tower in one of its floors dedicated to new front-end proposals. This board will integrate a new analog acquisition chip called SAS (Smart Auto-triggering Sampler) introducing thus a new analog front-end but inheriting most of the digital logic present in the current DAQ board discussed in this thesis. For what concern the activity on high-resolution vertex detectors, I worked within the SLIM5 collaboration for the characterization of a MAPS (Monolithic Active Pixel Sensor) device called APSEL-4D. The mentioned chip is a matrix of 4096 active pixel sensors with deep N-well implantations meant for charge collection and to shield the analog electronics from digital noise. The chip integrates the full-custom sensors matrix and the sparsifification/readout logic realized with standard-cells in STM CMOS technology 130 nm. For the chip characterization a test-beam has been set up on the 12 GeV PS (Proton Synchrotron) line facility at CERN of Geneva (CH). The collaboration prepared a silicon strip telescope and a DAQ system (hardware and software) for data acquisition and control of the telescope that allowed to store about 90 million events in 7 equivalent days of live-time of the beam. My activities concerned basically the realization of a firmware interface towards and from the MAPS chip in order to integrate it on the general DAQ system. Thereafter I worked on the DAQ software to implement on it a proper Slow Control interface of the APSEL4D. Several APSEL4D chips with different thinning have been tested during the test beam. Those with 100 and 300 um presented an overall efficiency of about 90% imparting a threshold of 450 electrons. The test-beam allowed to estimate also the resolution of the pixel sensor providing good results consistent with the pitch/sqrt(12) formula. The MAPS intrinsic resolution has been extracted from the width of the residual plot taking into account the multiple scattering effect.

Reconstruction of CNGS neutrino events in the emulsions of the OPERA experiment

The OPERA experiment aims at the direct observation of ν_mu -> ν_tau oscillations in the CNGS (CERN Neutrinos to Gran Sasso) neutrino beam produced at CERN; since the ν_e contamination in the CNGS beam is low, OPERA will also be able to study the sub-dominant oscillation channel ν_mu -> ν_e. OPERA is a large scale hybrid apparatus divided in two supermodules, each equipped with electronic detectors, an iron spectrometer and a highly segmented ~0.7 kton target section made of Emulsion Cloud Chamber (ECC) units. During my research work in the Bologna Lab. I have taken part to the set-up of the automatic scanning microscopes studying and tuning the scanning system performances and efficiencies with emulsions exposed to a test beam at CERN in 2007. Once the triggered bricks were distributed to the collaboration laboratories, my work was centered on the procedure used for the localization and the reconstruction of neutrino events.

Kernspektroskopie an N=40 und N=82 Nukliden

Der astrophysikalische r-Prozeß (schneller Neutroneneinfang), ist verantwortlich für die Nukleosynthese einer großen Zahl von Elementen, die schwerer als Eisen sind. Benutzt man das ''waiting-point''-Modell, so kann die Häufigkeitsverteilung der Elemente durch drei nukleare und drei stellare Input-Parameter beschrieben werden. Für einen gegebenen Satz von stellaren Parametern definiert die Neutronenseparationsenergie (Sn) den r-Prozeß-Pfad. Die beta-Zerfall-Halbwertszeit (T1/2) der Kerne im r-Prozeß-Pfad bestimmt die Häufigkeit des Vorläufers und bezieht man die Neutronenemissionswahrscheinlichkeit (Pn) mit ein, so auch die endgültige Häufigkeitsverteilung. Von besonderer Wichtigkeit sind die neutronenreichen ''waiting-point''-Isotope. Zum Beispiel sind die N=82 Isotope verantwortlich für den solaren A~130 Häufigkeits-Peak. Diese Arbeit befaßt sich mit der Identifizierung und der Untersuchung von Zerfallseigenschaften neutronenreicher Isotope des Mangan (A=61 bis 69) und Cadmium (A=130 bis 132). Neutronenreiche Nuklide zu erzeugen und zu detektieren ist ein komplizierter und zeitaufwendiger Prozeß, nichts desto trotz erfolgreich. Das Hauptproblem bei dieser Art von Experimenten ist der hohe isobare Untergrund. Aus diesem Grunde wurden speziell entwickelte Anregungsschemata für Mangan und Cadmium eingesetzt, um die gewünschten Isotope mittels Laser-Resonanzionisation chemisch selektiv zu ionisieren. Bei CERN/ISOLDE war es möglich im Massenbereich von 60^Mn bis 69^Mn neue Halbwertszeiten und Pn-Werte zu bestimmen. Für 64^Mn und 66^Mn konnten darüber hinaus erstmals noch partielle Zerfallsschemata aufgestellt werden. Es zeigte sich, daß die Ergebnisse teilweise recht überraschend waren, da sie nicht durch das QRPA-Modell vorhergesagt wurden. Mit Hilfe vergleichender Studien des Gesamttrends der Niveausystematiken der gg-Kerne von 26_Fe, 30_Zn, 32_Ge, 24_Cr und 28_Ni konnte ein Verschwinden der sphärischen N=40 Unterschale und die Existenz einer neuen Region mit signifikanter Deformation nachgewiesen werden, die vermutlich ihr ''Zentrum'' bei 64^Cr hat. Ebenfalls zeigen Studien der Niveausystematik bei 48Cd und der Vergleich mit 46_Pd, 54_Xe, 52_Te und 50_Sn, erste Hinweise eines Schalenquenchings bei N=82. Es wurde die Messung der Halbwertszeit von 130^Cd verbessert und die Halbwertszeiten von 131^Cd und 132^Cd erstmals bestimmt. Die neuen Daten können nur erklärt werden, wenn man bei der QRPA-Rechnung verbotene Übergänge mitberücksichtigt. Es genügt nicht, die Rechnung für reinen Gamow-Teller-Zerfall durchzuführen.

Untersuchungen am Drei-Eichbosonen-Vertex der elektroschwachen Wechselwirkung mit dem ALEPH-Detektor

In der vorliegenden Arbeit werden vom ALEPH-Detektor am Speicherring LEP des CERN in Genf genommene Datenmengen aus den Jahren 1997 bis 1999 analysiert und sowohl Kopplungsparameter am Drei-Eichbosonen-Vertex derW-Boson-Paarproduktion, als auch die Anteile longitudinal beziehungsweise transversal polarisierter W-Bosonen, bei Schwerpunktsenergien von 183 GeV bis 202 GeV bestimmt. Betrachtet wird der rein leptonische Zerfallskanal, in dembeide W-Bosonen in ein Elektron-Neutrino- oder ein Myon-Neutrino-Paar zerfallen, der einen geringen Wirkungsquerschnitt aufweist, aber eine klareDetektorsignatur. Die aufgezeichneten Ereignisse werden selektiert und dabei eine Reinheit von durchschnittlich 72% erreicht. Der Hauptuntergrund besteht aus W-Boson-Paaren, bei denen zumindest ein W-Boson in ein Tauon-Neutrino-Paarzerfällt. Dieser Kanal zeigt ein sehr signalähnliches Verhalten. Die selektierten Ereignisse werden kinematisch rekonstruiert, um die Winkelverteilungen der Zerfallsprodukte der W-Bosonen zu extrahieren. Aus den Polarwinkelverteilungen der geladenen Zerfallsprodukte der W-Bosonen werden die Anteile longitudinal beziehungsweise transversal polarisierterW-Bosonen durch Anpassung der theoretischen Vorhersage an die selektierten Daten bestimmt. Dabei wird gefunden, daß f? = (71,6 ? 6,4_{stat.} ? 3,7_{syst.}) % der produzierten W-Bosonen transversal polarisiert sind, in Übereinstimmung mit der Vorhersage des Standardmodells (75,1%). Dieser Wert ist ein erster Hinweis auf die Kopplungsparameter am Drei-Eichbosonen-Vertex. Die CP-erhaltenden allgemeinen Kopplungsparameter $g_{rm Z}^1$, $kappa_gamma$ und $lambda_gamma$ werden bestimmt zu: $g_{rm Z}^1 = {{1,19^{+0,13}_{-0,16}}_{stat.}} {^{+0,09}_{-0,09}}_{syst.}$,$kappa_gamma = {{1,06^{+0,27}_{-0,09}}_{stat.}} {^{+0,08}_{-0,08}}_{syst.}$,$lambda_gamma = {{0,16^{+0,11}_{-0,13}}_{stat.}} {^{+0,08}_{-0,08}}_{syst.}$. Das Standardmodell sagt $g_{rm Z}^1 = 1$, $kappa_gamma = 1$ und $lambda_gamma = 0$ voraus. Mit diesen Kopplungsparametern lassen sich das magnetischeDipolmoment und das elektrische Quadrupolmoment der W-Bosonen bestimmen zu: $mu_{rm W} = frac{e}{2m_{rm W}} cdot (2,22^{+0,31}_{-0,19})$,$q_{rm W} = - frac{e}{m_{rm W}^2} cdot (0,90^{+0,32}_{-0,18})$. Die Messung der Kopplungsparameter stellt einen wichtigen Test des minimalen Standardmodells dar. In einem Jahr wird es möglich sein, diesen Test mit allen Daten aus der Phase II des Betriebs von LEP durchzuführen und die Genauigkeit durch Kombination mit anderen LEP-Experimenten zu erhöhen.

The topological trigger system of the TOF detector for the ALICE experiment at the LHC

The ALICE experiment at the LHC has been designed to cope with the experimental conditions and observables of a Quark Gluon Plasma reaction. One of the main assets of the ALICE experiment with respect to the other LHC experiments is the particle identification. The large Time-Of-Flight (TOF) detector is the main particle identification detector of the ALICE experiment. The overall time resolution, better that 80 ps, allows the particle identification over a large momentum range (up to 2.5 GeV/c for pi/K and 4 GeV/c for K/p). The TOF makes use of the Multi-gap Resistive Plate Chamber (MRPC), a detector with high efficiency, fast response and intrinsic time resoltion better than 40 ps. The TOF detector embeds a highly-segmented trigger system that exploits the fast rise time and the relatively low noise of the MRPC strips, in order to identify several event topologies. This work aims to provide detailed description of the TOF trigger system. The results achieved in the 2009 cosmic-ray run at CERN are presented to show the performances and readiness of TOF trigger system. The proposed trigger configuration for the proton-proton and Pb-Pb beams are detailed as well with estimates of the efficiencies and purity samples.