998 resultados para CASTE DETERMINATION
Resumo:
The present study aims to find the effect of freezing Time on the quality of Cobia (Rastrelliger kanagurta) and Indian Squid in commercial scale during freezing and subsequent frozen storage (−18◦C). Total time for freezing was significantly different (P<0.05) between the Cobia and Indian squid samples. The difference in the freezing time could be attributed to the varied quality of the 2 samples. Upon freezing, the moisture content decreased in Indian Squide samples compared to Cobia freezer where protein content decreased in both the samples. Upon freezing and during frozen storage, lipid oxidation products (peroxide value, and free fatty acid value) and volatile bases (total volatile base nitrogen) showed an increasing trend in both the samples with values slightly higher in Indian squid samples compared to cobia frozen samples. The total plate counts showed a significantly (P<0.05) decreasing trend in both the samples. K value did not show any significant (P<0.05) difference between the samples whereas the histamine formation was significantly (P<0.05) increased in Indian squid frozen samples compared to cobia samples. The taste and overall acceptability was significantly different (P<0.05) in cobia samples compared to Indian squid frozen samples on 5th month. Both samples were in acceptable condition up to 5 month but the Cobia frozen samples quality was slightly better than the air blast frozen samples.
Resumo:
The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.
Resumo:
To determine the best time for egg stripping after ovulation and over-ripened oocyte in the Caspian brown trout (Salmo trutta caspius), the eggs were retained in the parental abdominal cavity for 40 days post-ovulation (DPO) at 7±0.6°C. Eggs were stripped every 10-day interval in 4 treatment and were fertilized with a pool of semen obtained from 8 males. Also, the physiology and biochemistry of the eggs and ovarian fluids were studied. Results showed that the level of eyed eggs and hatched alevins declined with over-ripening time: that is, the expected amounts (90.65 ± 6.28% for eyeing and 86.33 ± 6.82% for hatching) in newly ovulated eggs (0–10 DPO) decreased to 0.67 ± 1.34% and 0.49 ± 0.98%, respectively, in over-ripened eggs (30–40 DPO). However, larval abnormalities remained constant for 30-days after ovulation. During the course of oocyte over-ripening, the pH of the ovarian fluid significantly decreased and the concentration of glucose, protein, calcium, iron, and aspartate aminotransferase activity significantly increased. Moreover, the concentration of protein, triglycerides, and aspartate aminotransferase activity in the eggs also changed. In the newly ovulated egg, the yolk consisted of homogenous tissue and its perivitelline space diameter had no considerable differences. With over-ripening, the yolk became heterogeneous, while chorion diameter and micropyle did not change. The perivitelline space diameter varied among different areas. The present study demonstrated that the best time to take Caspian brown trout eggs after ovulation at 7± 0.6°C was up to 10 DPO. Among the studied parameters of the egg and ovarian fluid, egg quality was related to both ovarian fluid parameters (e.g., pH, protein, aspartate aminotransferase, glucose, cholesterol, triglycerides, calcium, iron) and egg parameters (e.g., cholesterol, triglycerides, iron, aspartate aminotransferase). Thus, these parameters can be used as a egg quality markers in this species.
Resumo:
Hilsa shad, Tenuolosa ilisha, belongs to Clupeidae family and Alsinae subfamily is an euryhaline pelagic and anadromous species living in marine and freshwater waters. Regarding to study the biological characteristics of this species, this study was carried out in the Northern Persian Gulf within Bushehr province waters during years 2006-7. A total of 344 specimens were collected and transported to the laboratory for further different biological measurements consist of: reproduction (GSI, fecundity, maturity stages), feeding (stomach contents, food preference ...), aging; 58 morphometric and ٧ meristic measurements. The results indicate that minimum, maximum and mean body weight are 203, 953 and 481.35±147.64 g, respectively and this values for total length are 26.5, 45.1 and 35.99±3.98 cm. For food regimes, the most abundant phytoplankton foods belong to Bacillariophyta (83.74٪) and zooplanktons of Arthropoda (51٪). The mean RLG was measured about 1.53±0.22 and the mean feeding intensity was about 51.79±38.13. Also, the aging of studied fishes showed that they have 2 to 4 years and most of the samples had 2+ years. The reproduction studies showed that Indian shad is a batch spawner species. The average gonadosomatic index (GSI) is 1.64±1.382 and the main spawning season was determined for April-May.
Resumo:
This paper presents the modeling of second generation (2 G) high-temperature superconducting (HTS) pancake coils using finite element method. The axial symmetric model can be used to calculate current and magnetic field distribution inside the coil. The anisotropic characteristics of 2 G tapes are included in the model by direct interpolation. The model is validated by comparing to experimental results. We use the model to study critical currents of 2 G coils and find that 100μV/m is too high a criterion to determine long-term operating current of the coils, because the innermost turns of a coil will, due to the effect of local magnetic field, reach their critical current much earlier than outer turns. Our modeling shows that an average voltage criterion of 20μV/m over the coil corresponds to the point at which the innermost turns' electric field exceeds 100μV/m. So 20μV/m is suggested to be the critical current criterion of the HTS coil. The influence of background field on the coil critical current is also studied in the paper. © 2012 American Institute of Physics.
Resumo:
The analysis of scientific data is integral to materials engineering and science. The correlation between measured variables is often quantified by estimating the coefficient of determination or the r2 value. This is the recognised procedure for determining linear relationships. The authors review the derivation of the r2 value and derive an associated quantity, termed the relative deviation (RD), which is the ratio of the root mean square of the deviations about the fitted line to the root mean square of the deviations about the y bar line expressed as a percentage. The relative deviation has an advantage over the coefficient of determination in that it has greater numerical sensitivity to changes in the spread of data about the fitted line, especially when the scatter is small. In addition, the relative deviation is able to define, in percentage terms, the reduction in scatter when different independent variables are correlated with a common dependent variable. Four case studies in the materials field (aggregate crushing value, Atterberg limits, permeability and creep of asphalt) from work carried out at the Queensland Main Roads Department are presented to show the use of the new parameter RD.
Resumo:
Two separate experiments using the Differential Decay Curve Method have been performed to extract mean lifetimes of excited states in 106Cd. The medium-spin states of interest were populated by the 98Mo( 12C, 4n) 106Cd reaction performed at the Wright Nuclear Structure Lab., Yale University. From this experiment, two isomeric state mean lifetimes have been deduced. The low-lying states were populated by the 96Mo(13C, 3n)106Cd reaction performed at the Institut für Kernphysik, Universität zu Köln. The mean lifetime of the Iπ = 21 + state was deduced, tentatively, as 16.4(9) ps. This value differs from the previously accepted literature value from Coulomb excitation of 10.43(9) ps.
Determination of the rheological parameters of self-compacting concrete matrix using slump flow test
Resumo:
The classification of a concrete mixture as self-compacting (SCC) is performed by a series of empirical characterization tests that have been designed to assess not only the flowability of the mixture but also its segregation resistance and filling ability. The objective of the present work is to correlate the rheological parameters of SCC matrix, yield stress and plastic viscosity, to slump flow measurements. The focus of the slump flow test investigation was centered on the fully yielded flow regime and an empirical model relating the yield stress to material and flow parameters is proposed. Our experimental data revealed that the time for a spread of 500 mm which is used in engineering practice as reference for measurement parameters, is an arbitrary choice. Our findings indicate that the non-dimensional final spread is linearly related to the non-dimensional yield-stress. Finally, there are strong indications that the non-dimensional viscosity of the mixture is associated with the non-dimensional final spread as well as the stopping time of the slump flow; this experimental data set suggests an exponential decay of the final spread and stopping time with viscosity. © Appl. Rheol.
Resumo:
We describe the microincrements, checks and annuli in the lapilli of the schizothoracine Ptychobarbus dipogon, an endemic species of the Tibetan plateau. We collected samples in the Yarlung Tsangpo River and its tributaries on a monthly basis (from April 2004 to August 2006). We describe the shape features of the three pairs of otoliths and document the full trajectory of lapillus development. We found that five to seven checks were clearly visible in the opaque zone of the first annulus. The pattern of 21-23 daily growth increments within each check might be explained as a lunar-induced deposition. We counted between 137 and 154 increments within the first annulus. Annuli appeared as a sequence of gradually declining increment widths, whereas false rings were characterized by abrupt checks. Our oldest estimates were 23(+)years for males and 44(+) for females. The time of annulus completion was clearly between March and April each year using monthly marginal increments analysis. We consider the factors responsible for daily increment formation as an endogenous circadian rhythm. Environmental information, such as strong sunlight and cold water temperatures in the Tibetan Plateau, could reinforce the endogenous daily cycle. Our results provided important data addressing the ecology and population dynamics of P. dipogon.