Present at the Creation: Montana Higher Education Reforms from 1972 Constitution -- Dr. Lawrence K. Pettit “In the Crucible of Change”

Prior to the passage of the 1972 Constitution, Montana’s higher education system was both controlled and victimized by Montana’s politics. Alternatingly, Governors or the Legislature tried to control and/or impose political ideology upon the management and teaching/content within the University System. Political favoritism and power-broking were the hallmark of the legislative appropriation process. Under the new Constitution, a newly empowered Board of Regents, and a new Commissioner of Higher Education managed the system and controlled the allocation of the legislative appropriations, but not without a major battle before the Montana Supreme Court. Dr. Lawrence K. Pettit (Larry Pettit) (b. 5/2/1937) was present at the creation of this newly structured higher education system as the first Commissioner of Higher Education in Montana after his appointment by the Board of Regents of the University System in 1973. Larry Pettit has had a dual career in politics and higher education. Pettit, of Lewistown, served as legislative assistant to U.S. Senators James E. Murray and Lee Metcalf, campaign manager, head of transition team and assistant to Montana Governor Thomas L. Judge, taught political science at The Pennsylvania State University (main campus), was chair of political science at Montana State University, Deputy Commissioner for Academic Programs at the Texas Higher Education Coordinating Board, Chancellor of the University System of South Texas (since merged with Texas A&M University), President of Southern Illinois University, and President of Indiana University of Pennsylvania from where he retired in 2003. He has served as chair of the Commission on Leadership for the American Council on Education, president of the National Association of (University) System Heads, and on many national and state boards and commissions in higher education. Pettit is author of “If You Live by the Sword: Politics in the Making and Unmaking of a University President.” More about Pettit is found at http://www.lawrencekpettit.com

Risk scoring for setting priorities in a monitoring of antimicrobial resistance in meat and meat products

Meat and meat products can be contaminated with different species of bacteria resistant to various antimicrobials. The human health risk of a type of meat or meat product carry by emerging antimicrobial resistance depends on (i) the prevalence of contamination with resistant bacteria, (ii) the human health consequences of an infection with a specific bacterium resistant to a specific antimicrobial and (iii) the consumption volume of a specific product. The objective of this study was to compare the risk for consumers arising from their exposure to antibiotic resistant bacteria from meat of four different types (chicken, pork, beef and veal), distributed in four different product categories (fresh meat, frozen meat, dried raw meat products and heat-treated meat products). A semi-quantitative risk assessment model, evaluating each food chain step, was built in order to get an estimated score for the prevalence of Campylobacter spp., Enterococcus spp. and Escherichia coli in each product category. To assess human health impact, nine combinations of bacterial species and antimicrobial agents were considered based on a published risk profile. The combination of the prevalence at retail, the human health impact and the amount of meat or product consumed, provided the relative proportion of total risk attributed to each category of product, resulting in a high, medium or low human health risk. According to the results of the model, chicken (mostly fresh and frozen meat) contributed 6.7% of the overall risk in the highest category and pork (mostly fresh meat and dried raw meat products) contributed 4.0%. The contribution of beef and veal was of 0.4% and 0.1% respectively. The results were tested and discussed for single parameter changes of the model. This risk assessment was a useful tool for targeting antimicrobial resistance monitoring to those meat product categories where the expected risk for public health was greater.

Field-scale water transport in unsaturated crystalline rock

Safe disposal of toxic wastes in geologic formations requires minimal water and gas movement in the vicinity of storage areas, Ventilation of repository tunnels or caverns built in solid rock can desaturate the near field up to a distance of meters from the rock surface, even when the surrounding geological formation is saturated and under hydrostatic pressures. A tunnel segment at the Grimsel test site located in the Aare granite of the Bernese Alps (central Switzerland) has been subjected to a resaturation and, subsequently, to a controlled desaturation, Using thermocouple psychrometers (TP) and time domain reflectometry (TDR), the water potentials psi and water contents theta were measured within the unsaturated granodiorite matrix near the tunnel wall at depths between 0 and 160 cm. During the resaturation the water potentials in the first 30 cm from the rock surface changed within weeks from values of less than -1.5 MPa to near saturation. They returned to the negative initial values during desaturation, The dynamics of this saturation-desaturation regime could be monitored very sensitively using the thermocouple psychrometers, The TDR measurements indicated that water contents changed dose to the surface, but at deeper installation depths the observed changes were within the experimental noise. The field-measured data of the desaturation cycle were used to test the predictive capabilities of the hydraulic parameter functions that were derived from the water retention characteristics psi(theta) determined in the laboratory. A depth-invariant saturated hydraulic conductivity k(s) = 3.0 x 10(-11) m s(-1) was estimated from the psi(t) data at all measurement depths, using the one-dimensional, unsaturated water flow and transport model HYDRUS Vogel er al., 1996, For individual measurement depths, the estimated k(s) varied between 9.8 x 10(-12) and 6.1 x 10(-11) The fitted k(s) values fell within the range of previously estimated k(s) for this location and led to a satisfactory description of the data, even though the model did not include transport of water vapor.

Fruit production in three masting tree species does not rely on stored carbon reserves

Fruiting is typically considered to massively burden the seasonal carbon budget of trees. The cost of reproduction has therefore been suggested as a proximate factor explaining observed mast-fruiting patterns. Here, we used a large-scale, continuous 13C labeling of mature, deciduous trees in a temperate Swiss forest to investigate to what extent fruit formation in three species with masting reproduction behavior (Carpinus betulus, Fagus sylvatica, Quercus petraea) relies on the import of stored carbon reserves. Using a free-air CO2 enrichment system, we exposed trees to 13C-depleted CO2 during 8 consecutive years. By the end of this experiment, carbon reserve pools had significantly lower δ13C values compared to control trees. δ13C analysis of new biomass during the first season after termination of the CO2 enrichment allowed us to distinguish the sources of built-in carbon (old carbon reserves vs. current assimilates). Flowers and expanding leaves carried a significant 13C label from old carbon stores. In contrast, fruits and vegetative infructescence tissues were exclusively produced from current, unlabeled photoassimilates in all three species, including F. sylvatica, which had a strong masting season. Analyses of δ13C in purified starch from xylem of fruit-bearing shoots revealed a complete turn-over of starch during the season, likely due to its usage for bud break. This study is the first to directly demonstrate that fruiting is independent from old carbon reserves in masting trees, with significant implications for mechanistic models that explain mast seeding.

Morphologic-anthropological investigations in tomb K93.12 at Dra’ Abu el-Naga (Western Thebes, Egypt)

In this study we present the analysis of the human remains from tomb K93.12 in the Ancient Egyptian necropolis of Dra’ Abu el-Naga, located opposite the modern city of Luxor in Upper Egypt on the western bank of the Nile. Archaeological findings indicate that the rock tomb was originally built in the early 18th dynasty. Remains of two tomb-temples of the 20th dynasty and the looted burial of the High Priest of Amun Amenhotep have been identified. After the New Kingdom the tomb was reused as a burial place until the 26th dynasty. The skeletal and mummified material of the different tomb areas underwent a detailed anthropological and paleopathological analysis. The human remains were mostly damaged and scattered due to extensive grave robberies. In total, 79 individuals could be partly reconstructed and investigated. The age and sex distribution revealed a male predominance and a high percentage of young children (< 6 years) and adults in the range of 20 to 40 years. The paleopathological analysis showed a high prevalence of stress markers such as cribra orbitalia in the younger individuals, and other pathological conditions such as dental diseases, degenerative diseases and a possible case of ankylosing spondylitis. Additionally, 13 mummies of an intrusive waste pit could be attributed to three different groups belonging to earlier time periods based on their style of mummification and materials used. The study revealed important information on the age and sex distribution and diseases of the individuals buried in tomb K93.12.

Impacts of Technology Adoption: Comparing Returns to the Farming Sector in Maine under Alternative Technology Regimes

This thesis tests if certain technology choices are associated with a reduction in the proportion of farming activities in the agro-food system in Maine. Goodman, Sorj, and Wilkinson define appropriationism as the replacement of farming sector activities by industrial inputs. Based on the concept of appropriationism, industrial fanning systems using large amounts of synthetic inputs contribute less to fanning than more agrarian systems, like organic fanning. Thus, returns to the farming sector should be greater for organic compared with conventional potato fanning in Maine since organic farming uses fewer industrial inputs. Goodman et. al. define substitutionism as the displacement of farming sector commodities and activities by industrial processes in the marketing sector. Based on the concept of substitutionism, returns to the farming sector should be greater for Lay's Classic®™ potato chips made from natural potatoes compared with Baked Lay's®™ potato crisps manufactured from processed dehydrated potatoes. Returns to the farming sector are defined as returns to the farmer or farm family from farming activities, returns to farm labor, and returns to farmers and farm labor producing inputs used on the farm. Results show absolute returns to the farming sector are less for organic compared to conventional tablestock potato farms in Maine. However as a proportion of farm revenues, large organic farms that market at least 25% of their produce to retail stores or directly to consumers do as well as conventional farms. When comparing returns as a proportion of consumer expenditures, these organic farms do better than conventional farms. Returns to the farming sector are less for organic because of yield penalties, cost of marketing services, and diseconomies of size for organic tablestock potato farms. Expanding acreage and reintegrating livestock with cropping systems may increase returns to the fanning sector. Organic farming demonstrates difficulties in providing marketing services at the farm level. Providing marketing services limits the ability to expand production to capture economies of size. Maine organic potato farmers emphasize non-monetary values such as supporting sustainable agriculture, self-sufficiency, the intrinsic value of work, and close community and family connections. Returns to the farming sector as a proportion of consumer expenditures are about three times greater for Lay's Classic®™ potato chips than for Baked Lay's®™ potato crisps, since the value that farmers receive for potatoes used to produce dehydrated potato flakes in one pound of crisps is about half of the value that farmers receive for potatoes used to make one pound of chips. However, this assumes farmers assign a cost to producing low-grade potatoes for dehydration proportionate to their value. Premium potatoes are used to produce potato chips. Low-grade potatoes are used to produce the dehydrated potato flakes used to make potato crisps. Returns to the farming sector are slightly greater for potato crisps if no costs are allocated to producing low-grade potatoes for dehydration. A shift in consumer preferences from potato chips to crisps may result in a geographical shift of potato production from Maine to the Pacific Northwest assuming no food-grade dehydration facilities are built in Maine.

Lucha obrera, conflicto sindical y organización armada : El caso de la Juventud Trabajadora Peronista de Propulsora Siderúrgica [1973-1976]

El presente trabajo aborda el caso de la Juventud Trabajadora Peronista en la empresa Propulsora Siderúrgica de la localidad de Ensenada en el período 1973-1976, constituyendo éste un período clave en la historia política argentina en tanto significó el retorno del peronismo al poder luego de dieciocho años de proscripción legal. Enmarcada en la extensa constelación de experiencias de la ?nueva izquierda? que irrumpe con fuerza en Argentina a partir de fines de los años sesenta, y específicamente en la amplia experiencia de las fuerzas peronistas revolucionarias dentro de ella, la Juventud Trabajadora Peronista aparece como un espacio político-sindical especialmente rico para el estudio y análisis en el campo de la historia reciente argentina y dentro de ella de las prácticas sindicales radicalizadas. Fundada en 1973, la JTP nace como frente de masas sindical de la organización armada Montoneros. Fundada en el contexto histórico, político y social de retorno de Perón al país y de crisis del gobierno peronista, ésta seráparte de la emergencia de particulares formas de vínculo social en el que se entrecruzan elementos ligados a la práctica de los militantes obreros, sus agrupaciones sindicales, el proceso de radicalización general del período y la singular participación de las organizaciones armadas peronistas. Contemplado el entrecruzamiento entre organizaciones armadas revolucionarias, organizaciones sindicales combativas y la radicalización de sectores de la clase trabajadora, nuestro trabajo enfatiza la capacidad política obrera para imponer condiciones al capital, al gobierno y a sectores burocráticos del sindicalismo. Es en estos tres frentes de combate en los que se verán inmersos los sectores radicalizados de la clase obrera argentina que buscamos poner en un primer plano a lo largo de esta investigación

Lucha obrera, conflicto sindical y organización armada : El caso de la Juventud Trabajadora Peronista de Propulsora Siderúrgica [1973-1976]

El presente trabajo aborda el caso de la Juventud Trabajadora Peronista en la empresa Propulsora Siderúrgica de la localidad de Ensenada en el período 1973-1976, constituyendo éste un período clave en la historia política argentina en tanto significó el retorno del peronismo al poder luego de dieciocho años de proscripción legal. Enmarcada en la extensa constelación de experiencias de la ?nueva izquierda? que irrumpe con fuerza en Argentina a partir de fines de los años sesenta, y específicamente en la amplia experiencia de las fuerzas peronistas revolucionarias dentro de ella, la Juventud Trabajadora Peronista aparece como un espacio político-sindical especialmente rico para el estudio y análisis en el campo de la historia reciente argentina y dentro de ella de las prácticas sindicales radicalizadas. Fundada en 1973, la JTP nace como frente de masas sindical de la organización armada Montoneros. Fundada en el contexto histórico, político y social de retorno de Perón al país y de crisis del gobierno peronista, ésta seráparte de la emergencia de particulares formas de vínculo social en el que se entrecruzan elementos ligados a la práctica de los militantes obreros, sus agrupaciones sindicales, el proceso de radicalización general del período y la singular participación de las organizaciones armadas peronistas. Contemplado el entrecruzamiento entre organizaciones armadas revolucionarias, organizaciones sindicales combativas y la radicalización de sectores de la clase trabajadora, nuestro trabajo enfatiza la capacidad política obrera para imponer condiciones al capital, al gobierno y a sectores burocráticos del sindicalismo. Es en estos tres frentes de combate en los que se verán inmersos los sectores radicalizados de la clase obrera argentina que buscamos poner en un primer plano a lo largo de esta investigación

Lucha obrera, conflicto sindical y organización armada : El caso de la Juventud Trabajadora Peronista de Propulsora Siderúrgica [1973-1976]

El presente trabajo aborda el caso de la Juventud Trabajadora Peronista en la empresa Propulsora Siderúrgica de la localidad de Ensenada en el período 1973-1976, constituyendo éste un período clave en la historia política argentina en tanto significó el retorno del peronismo al poder luego de dieciocho años de proscripción legal. Enmarcada en la extensa constelación de experiencias de la ?nueva izquierda? que irrumpe con fuerza en Argentina a partir de fines de los años sesenta, y específicamente en la amplia experiencia de las fuerzas peronistas revolucionarias dentro de ella, la Juventud Trabajadora Peronista aparece como un espacio político-sindical especialmente rico para el estudio y análisis en el campo de la historia reciente argentina y dentro de ella de las prácticas sindicales radicalizadas. Fundada en 1973, la JTP nace como frente de masas sindical de la organización armada Montoneros. Fundada en el contexto histórico, político y social de retorno de Perón al país y de crisis del gobierno peronista, ésta seráparte de la emergencia de particulares formas de vínculo social en el que se entrecruzan elementos ligados a la práctica de los militantes obreros, sus agrupaciones sindicales, el proceso de radicalización general del período y la singular participación de las organizaciones armadas peronistas. Contemplado el entrecruzamiento entre organizaciones armadas revolucionarias, organizaciones sindicales combativas y la radicalización de sectores de la clase trabajadora, nuestro trabajo enfatiza la capacidad política obrera para imponer condiciones al capital, al gobierno y a sectores burocráticos del sindicalismo. Es en estos tres frentes de combate en los que se verán inmersos los sectores radicalizados de la clase obrera argentina que buscamos poner en un primer plano a lo largo de esta investigación

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Functionalism and Caprice in Stonecutting. The Case of the Nativity Chapel in Burgos Cathedral

Starting from the inaugural text of Philibert de L'Orme, stereotomic treatises and manuscripts are subject to the opposing forces of reason and fancy. The Nativity Chapel in Burgos Cathedral provides an outstanding case study on this subject. It was built in 1571-1582 by Martín de Bérriz and Martín de la Haya, using an oval vault resting on trumpet squinches to span a rectangular bay. Bed joints and rib axes are not planar curves, as usual in oval vaults. This warping is not capricious; we shall argue that it is the outcome of a systematic tracing method. As a result of this process, the slope of the bed joints increases slightly in the first courses, but stays fairly constant after the third course; this solution prevents the upper courses from slipping. Thus, in the Nativity Chapel of Burgos Cathedral, the constraints of masonry construction fostered a singular solution verging on capriccio. It is also worthwhile to remark that the warping of the joints is not easily appreciable to the eye and that the tracing process does not seem to start from a previous conception of the resulting form. All this suggests that we should be quite careful when talking about the whimsical character of Late Gothic and Early Renaissance; in some occasions, apparent caprice is the offspring of practical thinking.

Structural Analysis of Thin Tile Vaults and Domes: The Inner Oval Dome of the Basilica de los Desamparados in Valencia

The inner oval dome of the Basílica de la Virgen los Desamparados, built in 1701, is one of the most slender masonry vaults ever built. It is a tile dome with a total thickness of 80 mm and a main span of 18.50 m. It was built without centering with great ingenuity and economy of means, thirty three years after the termination of the building in 1667. The dome is in contact with the external dome only in the inferior part with the projecting ribs of the intrados, the lunettes of the windows, and, in the upper part, through 126 inclined iron bars. This unique construction was revealed in the 1990's in the studies previous to the restoration of the Basílica, and has given rise to different theories about the mode of construction and the structural behaviour and safety of the dome. The present contribution aims to provide a plausible hypothesis about the mode of construction and to explain the safety of the inner dome which has stood, without need of repairs or reinforcement, for 300 hundred years.

Bio-inspired FPGA Architecture for Self-Calibration of an Image Compression Core based on Wavelet Transforms in Embedded Systems

A generic bio-inspired adaptive architecture for image compression suitable to be implemented in embedded systems is presented. The architecture allows the system to be tuned during its calibration phase. An evolutionary algorithm is responsible of making the system evolve towards the required performance. A prototype has been implemented in a Xilinx Virtex-5 FPGA featuring an adaptive wavelet transform core directed at improving image compression for specific types of images. An Evolution Strategy has been chosen as the search algorithm and its typical genetic operators adapted to allow for a hardware friendly implementation. HW/SW partitioning issues are also considered after a high level description of the algorithm is profiled which validates the proposed resource allocation in the device fabric. To check the robustness of the system and its adaptation capabilities, different types of images have been selected as validation patterns. A direct application of such a system is its deployment in an unknown environment during design time, letting the calibration phase adjust the system parameters so that it performs efcient image compression. Also, this prototype implementation may serve as an accelerator for the automatic design of evolved transform coefficients which are later on synthesized and implemented in a non-adaptive system in the final implementation device, whether it is a HW or SW based computing device. The architecture has been built in a modular way so that it can be easily extended to adapt other types of image processing cores. Details on this pluggable component point of view are also given in the paper.

Maximum Likelihood Estimation of Modal Parameters in Structures Using the Expectation Maximization Algorithm

This paper presents a time-domain stochastic system identification method based on maximum likelihood estimation (MLE) with the expectation maximization (EM) algorithm. The effectiveness of this structural identification method is evaluated through numerical simulation in the context of the ASCE benchmark problem on structural health monitoring. The benchmark structure is a four-story, two-bay by two-bay steel-frame scale model structure built in the Earthquake Engineering Research Laboratory at the University of British Columbia, Canada. This paper focuses on Phase I of the analytical benchmark studies. A MATLAB-based finite element analysis code obtained from the IASC-ASCE SHM Task Group web site is used to calculate the dynamic response of the prototype structure. A number of 100 simulations have been made using this MATLAB-based finite element analysis code in order to evaluate the proposed identification method. There are several techniques to realize system identification. In this work, stochastic subspace identification (SSI)method has been used for comparison. SSI identification method is a well known method and computes accurate estimates of the modal parameters. The principles of the SSI identification method has been introduced in the paper and next the proposed MLE with EM algorithm has been explained in detail. The advantages of the proposed structural identification method can be summarized as follows: (i) the method is based on maximum likelihood, that implies minimum variance estimates; (ii) EM is a computational simpler estimation procedure than other optimization algorithms; (iii) estimate more parameters than SSI, and these estimates are accurate. On the contrary, the main disadvantages of the method are: (i) EM algorithm is an iterative procedure and it consumes time until convergence is reached; and (ii) this method needs starting values for the parameters. Modal parameters (eigenfrequencies, damping ratios and mode shapes) of the benchmark structure have been estimated using both the SSI method and the proposed MLE + EM method. The numerical results show that the proposed method identifies eigenfrequencies, damping ratios and mode shapes reasonably well even in the presence of 10% measurement noises. These modal parameters are more accurate than the SSI estimated modal parameters.

Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

Nearly 3000 slaughterhouses (74% of them public facilities) were built in Spain during the last decades of the nineteenth century and the first half of the twentieth century. The need to comply with new technical requirements and regulations on the hygiene of the meat passed in the 70s and the gradual replacement of public facilities by larger and more modern private slaughterhouses have subsequently led to the closure and abandonment of many of these buildings. Public slaughterhouses generally consisted of several single-storey and open-plan buildings located around a courtyard. Although originally they were preferably located on the outskirts of the towns, many slaughterhouses are now placed inside the built up areas, due to the urban development. The present work aims to contribute to a better understanding of these agro-industrial buildings and to provide ideas for their conservation and reuse. A review on the historical evolution and the architectural features of the public slaughterhouses in Spain is presented and different examples of old vacant slaughterhouses reused to accommodate libraries, offices, community centres, exhibition halls or sports centres, among others, are shown in the paper.