Initiation de l'adhésion leucocytaire : rôle des fucosyltransférases et des ligands des sélectines

RESUME La dissémination extramédullaire des cellules blastiques est une complication majeure des leucémies myéloïdes (LMA) ou lymphoïdes aiguës (LLA). La migration des cellules blastiques dépend de mécanismes semblables à ceux qui régulent la migration des leucocytes dans un site d'inflammation. Parmi ceux-ci, les oligosaccharides fucosylés décorant les ligands des sélectines jouent un rôle clé en interagissant avec les sélectines. PSGL-1 (P-Selectin Glycoprotein Ligand-1) est une protéine de 240 kD, exprimée à la surface des leucocytes, permettant de soutenir le roulement leucocytaire sur les sélectines, le long de la paroi vasculaire. L'interaction de PSGL-1 avec les sélectines nécessite des modifications post-traductionnelles de type sialylation, sulfatation , N et 0-glycosylation. Parmi les enzymes impliqués, les α1,3-fucosyltransférases jouent un rôle important dans la biosynthèse d'oligosaccharides fucosylés, ligands des sélectines (sLex, Lex, VIM-2, CLA). Comme l'expression des α1,3-fucosyltransférases par les cellules blastiques leucémiques n'a pas été étudiée précédemment, nous l'avons recherchée dans 120 cas de leucémies aiguës. Les ARNm des FucT-IV et -VII ont été détectés, par RT-PCR, dans tous les cas testés. L'ARNm de la FucT-IX n'a été observé que dans 40% des leucémies aiguës (48/120). L'ARNm de la FucT-IX est détecté dans 65% des LMA (47/72) et, moins fréquemment, dans 26% des LLA (11/42). A noter que les cas de LLA exprimant la FucT-IX correspondent essentiellement à des LLA secondaires à la transformation d'une leucémie myéloïde chronique ou des LLA de la lignée B de type leucémie/lymphome de Burkitt. L'expression de PSGL-1 et des oligosaccharides fucosylés par les blastes varie significativement parmi les LMA et les LLA : Lex, VIM-2 et sLex étant exprimés plus fréquemment par les myéloblastes que par les lymphoblastes. Le rôle des FucT-IV, -VII et -IX dans la synthèse des Lex, VIM-2, CLA et sLex a été examiné en exprimant l'ADNc de chaque FucT dans des cellules CHO. L'immunophénotypisation des transfectants indique que la FucT-VII synthétise sLex et CLA, mais pas Lex et VIM-2. Lex et VIM-2 sont générés par la FucT-IV. La FucT-IX ne participe qu'à la synthèse de Lex, sa capacité de synthèse de VIM-2 dans les cellules CHO est très faible. Le rôle de la FucT-IX dans la régulation du roulement cellulaire dépendant des sélectines a été testé dans des conditions de flux. Les vitesses de roulement des cellules CHO co-exprimant la FucT-LX, la core-2 01,6-N-acetylglucosaminyltransferase et PSGL-1 sont très élevées sur la P-sélectine (médiane : 497.95 µm/s, n=96) alors qu'elles sont beaucoup plus lentes sur la E-sélectine (médiane 7 µm/s, n=64). Les recrutements sur la E-sélectine des cellules CHO-C2F9PSGL¬1 et des CHO-C2F7PSGL-1 sont similaires (moyenne ± SEM : 127.44 ± 4.38 vs. 151.16 ± 3.16 cellules/min/mm2, n=5). Celui des cellules CHO-C2F4PSGL-1 est par contre plus faible (54.20 ± 2.13 cellules/min/mm2, n=5). Ces résultats indiquent que la FucT-IX est impliquée dans la biosynthèse de Lex, VIM-2 et CLA et qu'elle régule l'interaction des cellules CHO avec la E-sélectine. Contrairement aux FucT-IV et -VII, la FucT-IX ne joue qu'un rôle mineur dans la régulation du roulement cellulaire sur la L- et la P-sélectine. L'expression fréquente de la FucT-IX par les myéloblastes suggère qu'elle pourrait participer avec les FucT-IV et -VII à la régulation de la migration cellulaire dépendant de la E-sélectine. Finalement, ce travail de thèse a été étendu à l'identification des protéines cytoplasmiques qui interagissent avec le domaine cytoplasmique de PSGL-1 et qui pourraient être impliquées dans la transmission de signaux intracellulaires. Les ligands intracellulaires de PSGL-1 seront identifiés par la technique du double hybride qui nous a déjà permis de confirmer que syk et la N-moésine se lient au domaine cytoplasmique de PSGL-1. Des ligands supplémentaires seront identifiés employant une librairie provenant des cellules souches hématopoïétiques comme proie. ABSTRACT Blast cell dissemination is a major complication of acute myeloblastic (AML) and lymphoblastic leukemia (ALL). Blast cell migration is dependent on mechanisms that are similar to those which regulate leukocyte migration into inflammatory lesions. Among them, fticosylated oligosaccharides that decorate selectin ligands play a key role by interacting with selectins. PSGL-1 (P-Selectin Glycoprotein Ligand-1) is a 240 kD glycoprotein constitutively expressed on leucocytes and which supports leukocyte rolling on selectins. PSGL-1 interaction with selectins is dependent on post-translational modifications such as sialylation, sulfation, N- and 0-glycosylation. Among the involved enzymes, the α1,3-fucosyltransferases (FucT) play a major role in generating cell surface glycoconjugates carrying fucosylated oligosaccharides which interact with selectins (sLex, Lex, VIM-2, CLA). Since no information is available on the expression of α1,3-fucosyltransferases by leukemic blast cells, we examined it in 120 cases of acute leukemia. FucT-IV and -VII mRNAs were detected, by RT-PCR, in all tested cases. In contrast, the presence of FucT-IX mRNA was shown in only 40% of patients with acute leukemia (48/120). FucT-IX mRNA was detected in 65% of AML (47/72) and, less frequently, in 26% of ALL (11/42). Importantly, all ALL cases expressing FucT-IX were either secondary leukemia resulting from the transformation of chronic myelocytic leukemia in acute lymphoblastic leukemia or mature B-ALL (FAB L3 subtype or Burkitt lymphoma/leukemia according to WHO classification). FucT-IX was not detected in precursor B or T-ALL. The expression of PSGL-1 and fucosylated epitopes was significantly different among AML and ALL, Lex, VIM-2 and sLex being more frequently expressed by myeloblasts than by lymphoblasts. The role of FucT-IV, -VII and -IX in the biosynthesis of Lex, VIM-2, CLA and sLex was examined by expressing the cDNA of each α1,3-FucT in CHO cells. Immunophenotypic analysis of CHO transfectants indicated that FucT-VII synthesizes sLex and CLA but not Lex or VIM-2. Lex and CLA were generated by both FucT-IV and -IX. FucT-IV and FucT-IX differed in their ability to synthesize VIM-2, FucT-IX being less efficient than FucT-IV. The role of FucT-IX in regulating selectin-dependent rolling was assessed under hydrodynamic flow conditions. P-selectin-dependent interactions were transient and occurred at high velocities (median: 497.95 1,µm/s, n=96). In contrast, much slower rolling velocities were observed on E-selectin (median: 7 µm/s, n=64). The recruitment of CHO-C2F9PSGL-1 and CHO-C2F7PSGL-1 cells was similar on E-selectin (mean ± SEM: 127.44 ± 4.38, n=5 vs 151.16 ± 3.16 cells/min/mm2, n=5). In the other hand, CHO-C2F4PSGL-1 cells were less efficiently recruited on E-selectin (54.20 ± 2.13 cells/min/mm2, n=5). This results indicate that FucT-IX is involved in the biosynthesis of Lex, VIM-2 and CLA and that it confers E-selectin binding activity to CHO cells. By contrast to FucT-IV and -VII, FucT-IX had a minor role in regulating P- and L-selectin-dependent rolling on CHO transfectants. The frequent expression of FucT-IX in myeloblasts suggests that it may participate with FucT-IV and -VII in regulating E-selectin-dependent cell migration into tissues. Finally, this thesis work was extended to the identification of the cytoplasmic proteins interacting with cytoplasmic domain of PSGL-1 that may be involved in transducing intracellular signals. We planned to identify these intracellular ligands of PSGL-1 by using the double hybrid technique and already confirmed that syk and N-moesin bind to the cytoplasmic domain of PSGL-1. Additional PSGL-1 ligands will be sought by the same technique using a CD34+ stem cell library as pray. RESUME DESTINE A UN LARGE PUBLIC : L'adhésion et la migration leucocytaire sont nécessaires à de nombreux processus cellulaires comme la régulation de l'hématopoïèse, mais aussi dans la pathogenèse de l'artériosclérose, des maladies inflammatoires et de la métastatisation des cellules cancéreuses. Les molécules impliquées constituent depuis peu des cibles pour la thérapie du cancer. La migration leucocytaire vers un site d'inflammation dépend de mécanismes complexes, se déroulant en plusieurs étapes, nécessitant l'interaction séquentielle de molécules d'adhésion leucocytaires et endothéliales. Ainsi, chronologiquement, suite à un stimulus inflammatoire, les leucocytes « roulent » sur les cellules endothéliales, sont activées, s'arrêtent et traversent la paroi endothéliale (diapédèse) pour migrer dans les tissus environnants inflammés selon un gradient chimiotactique. La première étape de roulement met en jeu deux molécules principales : PSGL-1 (P-Sélectine Glycoprotéine Ligand-1) du coté des leucocytes et les sélectines du coté de l'endothélium de la paroi vasculaire. L'interaction entre ces deux molécules nécessite des décorations de ces protéines par des sucres, des résidus sulfates et des acides sialiques. Le sucre essentiel à la liaison demeure le fucose qui est attaché aux protéines grâce à des enzymes de la famille des fucosyltransferases. Actuellement, neuf fucosyltransférases humaines ont été identifiées et désignées sous FucT-I à IX. La FucT-IX, dernière fucosyltransférase clonée, a un faible degré d'homologie avec les autres fucosyltransférases mais sa séquence est extrêmement conservée entre les espèces. Ceci traduit son importance par une forte résistance à la pression évolutive. L'examen de son expression au sein de 120 cas de leucémies aiguës a mis en évidence son comportement atypique. En effet, alors que les autres FucTs sont toujours présentes, la FucT¬IX ne s'exprime que dans un cas sur deux en moyenne avec une préférence plus importante pour les leucémies myéloïdes. Ainsi, une étude plus approfondie de cet enzyme à mis en évidence sa capacité à induire une interaction cellulaire plus spécifique de la E-sélectine. Elle décore non seulement des protéines de surface, mais aussi certainement les glycolipides constituant la membrane cellulaire.

Bond Enhancement Techniques for PCC Whitetopping, HR-341, 1996

This research was initiated in 1991 as a part of a whitetopping project to study the effectiveness of various techniques to enhance bond strength between a new portland cement concrete (PCC) overlay and an existing asphalt cement concrete (ACC) pavement surface. A 1,676 m (5,500 ft) section of county road R16 in Dallas County was divided into 12 test sections. The various techniques used to enhance bond were power brooming, power brooming with air blast, milling, cement and water grout, and emulsion tack coat. Also, two sections were planed to a uniform cross-section, two pavement thicknesses were placed, and two different concrete mix proportions were used. Bond strength was perceived to be the key to determining an appropriate design procedure for whitetopping. If adequate bond is achieved, a bonded PCC overlay technique can be used for design. Otherwise, an unbonded overlay procedure may be more appropriate. Conclusions are as follows: (1) Bond Strength Differences - Milling increased bond strength versus no milling. Tack coat showed increased bond strength versus no tack coat. Planing, Air Blast and Grouting did not provide noticeable improvements in bond strength; nor did different PCC types or thicknesses affect bond strength significantly. (2) Structure - Structural measurements correlated strongly with the wide variation in pavement thicknesses. They did not provide enough information to determine the strength of bonding or the level of support being provided by the ACC layer. Longitudinal cracking correlated with PCC thicknesses and with planing. (3) Bond Over Time - The bond between PCC and ACC layers is degrading over time in the outside wheel path in all of the sections except tack coat (section 12). The bond strength in the section with tack coat was lower than the others, but remained relatively steady.

Effect of Waterproofing Admixture Ipanex on Concrete Durability (includes Addendum), MLR-98-2, 1999

The concrete admixture Ipanex (Registered trademark) manufactured by IPA Systems Inc. was submitted to the Iowa Department of Transportation (Iowa DOT) New Products Committee on April 15, 1998. The New Products Committee requested that the Iowa DOT Materials Laboratory evaluate the durability, corrosion inhibiting and concrete permeability reduction effects of this admixture. This report is intended to present the results of testing in Iowa DOT materials laboratories, review a Pennsylvania State University report, as well as review the IPA Systems Inc. marketing literature. The objective is to provide the New Products Committee with a recommendation concerning approval of this product based on the information gathered. The portland cement concrete admixture Ipanex (Registered trademark) did not show any significant benefit in terms of improvement in areas of permeability, chloride resistance and strength in the testing performed at the Iowa DOT. The literature and reports reviewed did not provide enough credible evidence to refute this conclusion. Additionally, the benefits ascribed to this product can be more economically achieved using other currently available products such as slag and silica fume. The recommendation is that this product not be approved for use on State projects in Iowa.

Genetic diversity and virulence pattern in field populations of Pyricularia grisea from rice cultivar Metica-1

Rice blast is a major yield constraint of the irrigated rice in the State of Tocantins, Brazil. The objective of this investigation was to study the phenotypic and genetic diversity within the pathogen population of Pyricularia grisea in samples collected from four individual farms of rice cultivar Metica-1, under epidemic conditions of leaf blast. A set of 87 isolates was tested on 32 rice genotypes including eight international differentials. Considering 80% similarity in virulence, two groups comprising a total of 81 isolates were recognized, independently of the farms from which they were collected. Eighty percent of the isolates pertained to pathotype ID-14, indicating high cultivar specificity and narrow diversity of virulence in the sample population. The virulence in pathogen population on rice cultivars BR-IRGA 409 and Rio Formoso was low. Analysis of P. grisea isolates using rep-PCR with two primer sequences from Pot2 generated fingerprint profiles of one to nine bands. Cluster analysis revealed the occurrence of six fingerprint groups with similarities ranging from 0.09 to 1. There was no straight relationship between virulence of the isolates based on reaction pattern on 32 genotypes and grouping based on Pot2 rep-PCR analysis of P. grisea isolates collected from 'Metica-1'.

Resistance spectra of six elite breeding lines of upland rice to Pyricularia grisea

The objective of this work was to evaluate the resistance spectra of six elite breeding lines of rice, developed for improved yield and grain quality, in inoculation tests in the greenhouse and in the field. Forty-six isolates of Pyricularia grisea collected from the cultivar Primavera, 31 from the cultivar Maravilha and 19 from six elite breeding lines, totaling 96 were utilized for inoculations. Out of 11 international and 15 Brazilian pathotypes, IC-1, IB-9, and BD-16, respectively, were identified as most frequent isolates collected from the cultivar Primavera. The isolates retrieved from Maravilha belong to four international and 11 Brazilian pathotypes, the predominant ones being IB-9 and IB-49 and BB-1 and BB-21, respectively. Lines CNAs 8711 and CNAs 8983 showed resistant reaction to all test isolates from Maravilha, while CNAs 8983 was susceptible to three isolates of Primavera pertaining to the pathotype IC-1. A majority of isolates exhibiting compatible reaction to Primavera were incompatible to Maravilha and vice-versa.Field assessment of rice blast utilizing the area under disease progress curve as a criterion for measuring disease severity showed significant differences among the six breeding lines. The isolates of P. grisea exhibiting differential reaction on breeding lines can be utilized in pyramiding resistance genes in new upland rice cultivars.

Evaluation of Metakaolin for HPC Deck Overlays, MLR-11-01, 2011

The use of High Performance Concrete (HPC) in Iowa has consisted of achieving slightly higher compressive strengths with an emphasis on reduced permeability. Concrete with reduced permeability has increased durability by slowing moisture and chloride ingress. Achieving reduced permeability has typically been accomplished with combinations of slag and Class C fly ash, or the use of blended cements such as locally available Type IS(20), IS(25) and Type IP(25) in conjunction with Class C fly ash. Fly ash has been used in the majority of concrete placed in Iowa since 1984 and slag has been available in Iowa since 1995. During the economic downturn in 2008, one of the cement plants that produced a Type IS(25) cement was forced to shut down, which reduced the availability of blended cements, typically used on HPC deck overlays. Recently, a source of high reactivity metakaolin has been made available. Metakaolin is produced by heating a pure kaolinite clay to 650 to 700 °C in a rotary kiln (calcining). Metakaolin is a white pozzolan that is used to produce concrete with increased strengths, reduced permeability, reduced efflorescence, and resistance to alkali silica reactivity. The W.R. Grace MK-100 metakaolin will likely be available in dissolvable bags between 25 and 50 pounds. Thus, the mix designs were based on the anticipated bag size range for field use. This research evaluated metakaolin mixes with and without Class C fly ash. Results indicated a seven percent replacement with metakaolin produced concrete with increased strengths and low permeability. When used with Class C fly ash, permeability is reduced to very low rating. Metakaolin may be used to enhance hardened concrete properties for use in high performance concrete (HPC).

Identification of Laboratory Techniques to Optimize Superpave HMA Surface Friction Characteristics, TR-450, 2010

Wet pavement friction is known to be one of the most important roadway safety parameters. In this research, frictional properties of flexible (asphalt) pavements were investigated. As a part of this study, a laboratory device to polish asphalt specimens was refined and a procedure to evaluate mixture frictional properties was proposed. Following this procedure, 46 different Superpave mixtures, one stone matrix asphalt (SMA) mixture and one porous friction course (PFC) mixture were tested. In addition, 23 different asphalt and two concrete field sections were also tested for friction and noise. The results of both field and laboratory measurements were used to develop an International Friction Index (IFI)-based protocol for measurement of the frictional characteristics of asphalt pavements for laboratory friction measurements. Based on the results of the study, it appears the content of high friction aggregate should be 20% or more of the total aggregate blend when used with other, polish susceptible coarse aggregates; the frictional properties increased substantially as the friction aggregate content increased above 20%. Both steel slag and quartzite were found to improve the frictional properties of the blend, though steel slag had a lower polishing rate. In general, mixes containing soft limestone demonstrated lower friction values than comparable mixes with hard limestone or dolomite. Larger nominal maximum aggregate size mixes had better overall frictional performance than smaller sized mixes. In addition, mixes with higher fineness moduli generally had higher macrotexture and friction.

Maintenance and Design of Steel Abutment Piles in Iowa Bridges, TR-622, 2014

Soil consolidation and erosion caused by roadway runoff have exposed the upper portions of steel piles at the abutments of numerous bridges, leaving them susceptible to accelerated corrosion rates due to the abundance of moisture, oxygen, and chlorides at these locations. This problem is compounded by the relative inaccessibility of abutment piles for close-up inspection and repair. The objective of this study was to provide bridge owners with recommendations for effective methods of addressing corrosion of steel abutment piles in existing and future bridges A review of available literature on the performance and protection of steel piles exposed to a variety of environments was performed. Eight potential coating systems for use in protecting existing and/or new piles were selected and subjected to accelerated corrosion conditions in the laboratory. Two surface preparation methods were evaluated in the field and three coating systems were installed on three piles at an existing bridge where abutment piles had been exposed by erosion. In addition, a passive cathodic protection (CP) system using sacrificial zinc anodes was tested in the laboratory. Several trial flowable mortar mixes were evaluated for use in conjunction with the CP system. For existing abutment piles, application of a protective coating system is a promising method of mitigating corrosion. Based on its excellent performance in accelerated corrosion conditions in the laboratory on steel test specimens with SSPC-SP3, -SP6, and -SP10 surface preparations, glass flake polyester is recommended for use on existing piles. An alternative is epoxy over organic zinc rich primer. Surface preparation of existing piles should include abrasive blast cleaning to SSPC-SP6. Although additional field testing is needed, based on the results of the laboratory testing, a passive CP system could provide an effective means of protecting piles in existing bridges when combined with a pumped mortar used to fill voids between the abutment footing and soil. The addition of a corrosion inhibitor to the mortar appears to be beneficial. For new construction, shop application of thermally sprayed aluminum or glass flake polyester to the upper portion of the piles is recommended.

Land plants and DNA barcodes: short-term and long-term goals.

Land plants have had the reputation of being problematic for DNA barcoding for two general reasons: (i) the standard DNA regions used in algae, animals and fungi have exceedingly low levels of variability and (ii) the typically used land plant plastid phylogenetic markers (e.g. rbcL, trnL-F, etc.) appear to have too little variation. However, no one has assessed how well current phylogenetic resources might work in the context of identification (versus phylogeny reconstruction). In this paper, we make such an assessment, particularly with two of the markers commonly sequenced in land plant phylogenetic studies, plastid rbcL and internal transcribed spacers of the large subunits of nuclear ribosomal DNA (ITS), and find that both of these DNA regions perform well even though the data currently available in GenBank/EBI were not produced to be used as barcodes and BLAST searches are not an ideal tool for this purpose. These results bode well for the use of even more variable regions of plastid DNA (such as, for example, psbA-trnH) as barcodes, once they have been widely sequenced. In the short term, efforts to bring land plant barcoding up to the standards being used now in other organisms should make swift progress. There are two categories of DNA barcode users, scientists in fields other than taxonomy and taxonomists. For the former, the use of mitochondrial and plastid DNA, the two most easily assessed genomes, is at least in the short term a useful tool that permits them to get on with their studies, which depend on knowing roughly which species or species groups they are dealing with, but these same DNA regions have important drawbacks for use in taxonomic studies (i.e. studies designed to elucidate species limits). For these purposes, DNA markers from uniparentally (usually maternally) inherited genomes can only provide half of the story required to improve taxonomic standards being used in DNA barcoding. In the long term, we will need to develop more sophisticated barcoding tools, which would be multiple, low-copy nuclear markers with sufficient genetic variability and PCR-reliability; these would permit the detection of hybrids and permit researchers to identify the 'genetic gaps' that are useful in assessing species limits.

Hot spots for diversity of Magnaporthe oryzae physiological races in irrigated rice fields in Brazil

The objective of this work was to evaluate the Magnaporthe oryzae pathotype diversity in new commercial irrigated rice fields in the Araguaia River Valley, state of Tocantins, Brazil. The causal agent of rice blast has heavily affected rice production in the region. Despite the efforts of breeding programs, blast resistance breakdown has been recorded shortly after the release of new resistant cultivars developed for the region. Among the causes of resistance breakage is the capacity of the fungus to rapidly develop new pathotypes. A sample of 479 M. oryzae monosporic isolates was obtained and tested using the international rice blast differential set. Isolate collections were made in small areas designed as trap nurseries and in scattered sites in their vicinity. Analysis of 250 M. oryzae isolates from three trap nurseries indicated the presence of 45 international M. oryzae races belonging to seven pathotype groups (IA-IG). In the isolates tested, 61 M. oryzae pathotypes belonging to all but the IH group were detected. The new areas of irrigated rice in the Araguaia River Valley have the highest diversity of M. oryzae pathotypes reported so far in Brazil.

Bond Contribution to Whitetopping Performance on Low Volume Roads, Construction Report, HR-341, 1993

This research was initiated in 1991 as a part of a whitetopping project to study the effectiveness of various techniques to enhance bond strength between a new Portland cement concrete (PCC) overlay and an existing asphalt cement concrete (ACC) pavement surface. A 1,676 m (5,500 ft) section of county road R16 in Dallas County, Iowa was divided into 12 test sections. The various techniques used to enhance bond were power brooming, power brooming with air blast, milling, cement and water grout, and emulsion tack coat. As a part of these bonding techniques, two pavement thicknesses were placed; two different concrete proportions were used; and two sections were planed to a uniform cross-slope.

Azacytidine for acute myeloid leukemia in elderly or frail patients: a phase II trial (SAKK 30/07).

Abstract This phase II trial treated elderly or frail patients with acute myeloid leukemia (AML) with single-agent subcutaneous azacytidine at 100 mg/m(2), on 5 of 28 days for up to six cycles. Treatment was stopped for lack of response, or continued to progression in responders. The primary endpoint was response within 6 months. A response rate ≥ 34% was considered a positive trial outcome. From September 2008 to April 2010, 45 patients from 10 centers (median age 74 [55-86] years) were accrued. Patients received four (1-21) cycles. Best response was complete response/complete response with incomplete recovery of neutrophils and/or platelets (CR/CRi) in eight (18%; 95% confidence interval [CI]: 8-32%.), 0 (0%) partial response (PR), seven (16%) hematologic improvement, 17 (38%) stable disease. Three non-responding patients stopped treatment after six cycles, 31 patients stopped early and 11 patients continued treatment for 8-21 cycles. Adverse events (grade ≥ III) were infections (n = 13), febrile neutropenia (n = 8), thrombocytopenia (n = 7), dyspnea (p = 6), bleeding (n = 5) and anemia (n = 4). Median overall survival was 6 months. Peripheral blood blast counts, grouped at 30%, had a borderline significant association with response (p = 0.07). This modified azacytidine schedule is feasible for elderly or frail patients with AML in an outpatient setting with moderate, mainly hematologic, toxicity and response in a proportion of patients, although the primary objective was not reached.

The CD4-like molecule LAG-3, biology and therapeutic applications.

IMPORTANCE OF THE FIELD: Promising immunotherapeutic agents targeting co-stimulatory pathways are currently being tested in clinical trials. One player in this array of regulatory pathways is the LAG-3/MHC class II axis. The lymphocyte activation gene-3 (LAG-3) is a negative co-stimulatory receptor that modulates T cell homeostasis, proliferation and activation. A recombinant soluble dimeric form of LAG-3 (sLAG-3-Ig, IMP321) shows adjuvant properties and enhances immunogenicity of tumor vaccines. Recent clinical trials produced encouraging results, especially when the human dimeric soluble form of LAG-3 (hLAG-3-Ig) was used in combination with chemotherapy. AREAS COVERED IN THIS REVIEW: The biological relevance of LAG-3 in vivo. Pre-clinical data demonstrating adjuvant properties, as well as the improvement of tumor immunity by sLAG-3-Ig. Recent advances in the clinical development of the therapeutic reagent IMP321, hLAG-3-Ig, for cancer treatment. WHAT THE READER WILL GAIN: This review summarizes preclinical and clinical data on the biological functions of LAG-3. TAKE HOME MESSAGE: The LAG-3 inhibitory pathway is attracting attention, in the light of recent studies demonstrating its role in T cell unresponsiveness, and Treg function after chronic antigen stimulation. As a soluble recombinant dimer, the sLAG-3-Ig protein acts as an adjuvant for therapeutic induction of T cell responses, and may be beneficial to cancer patients when used in combination therapies.

Combustibility of Paper Mill Rejects

Tämän työn tarkoituksena oli selvittää mekaanisen massan valmistuksen käsittävän paperitehtaan rejektija jätevirtojen poltettavuutta, jos paperitehtaan vesikiertojen sulkemisastetta lisätään. Jotta prosessin tilannetta sulkemisen jälkeen saatiin arvioitua, Anjalan paperitehtaan nykypäivän PK3:n prosessia tutkittiin kuorimolta jätevesilaitokselle. Kirjallisuusosassa käsiteltiin rejekti- ja jätevirtojen alkuperää mekaanista massaa käyttävässä paperitehtaassa. Myös tämän päivän jätevedenkäsittelyprosessit sekä sulkemisessa mahdolliset prosessiveden puhdistustekniikat esiteltiin lyhyesti. Lisäksikäytiin läpi nykypäivänä metsäteollisuudessa käytössä olevat polttotekniikat sekä polttoaineiden karakterisointi kattilan käytettävyyden ja päästöjen kannalta. Anjalan PK3:lla käytetään sekä peroksidi- että ditioniittivalkaistua tai pelkästään ditioniittivalkaistua hioketta riippuen tuotannossa olevasta lajista. PK3-prosessissa syntyneet jätevesi-, liete- ja muut jätevirrat selvitettiin molemmissa valkaisuolosuhteissa. Prosessin eniten liuennutta orgaanista ainesta sisältävät jätevesijakeet, 3-hiomon kuumankierron ja kirkassuodoksen ulosajot sekä kuoripuristimen suodos, valittiin puhdistettaviksi virroiksi prosessin sulkemista arvioitaessa. Kun peroksidivalkaisua käytettiin 3-hiomolla, TOC-kuorma jokeen oli 30 % suurempi kuin pelkällä ditioniittivalkaisulla. Jos prosessin sulkemisastetta lisättäisiin, TOC-kuorma olisi 30 %pienempi kuin tänäpäivänä peroksidivalkaisua käytettäessä (80 % puhdistustehokkuudella). Prosessin sulkemisastetta lisättäessä biolietettä muodostuisi n. 30 % vähemmän verrattuna nykytilanteeseen, sillä mikrobien ravintona käyttämää orgaanista ainesta päätyisi vähemmän jäteveteen. 3-hiomon peroksidivalkaisun vaikutus kattilan käytettävyyteen ja päästöihin oli pieni, sillä biolietteen osuus polttoaineen syötöstä oli vain 4 %. Vain osa biolietteestä muodostui 3-hiomolta peräisin olevaa orgaanista ainesta poistettaessa. Jos nykyisen pääpolttoaineen, PDF:n,osuuden jättää huomioimatta, SO2- ja NOx-päästöt sekä leijupedin sintrautuvuus ovat hiukan suuremmat käytettäessä peroksidivalkaisua 3-hiomolla kuin pelkästään ditioniittivalkaisulla. Jos kuoripuristimen ja hiomon suodosten puhdistuksen konsentraatit johdetaan poltettaviksi BFB-tyyppiseen kattilaan, leijupedin sintrautuminen tulisi olemaan suurin ongelma. Myös raskasmetalli-, SO2- ja NOx-päästöt lisääntyisivät merkittävästi verrattuna nykyiseen tilanteeseen. Sen sijaan kattilan korroosioriski tuskin lisääntyisi. Lisäksi konsentraattien kosteuspitoisuus olisi korkea, mikä tekisi poltosta kannattamatonta veden haihdutuksen vaatiessa paljon energiaa. Yksityiskohtaisempaa tutkimusta tarvitaan vielä prosessin sulkemisen vaikutuksista päästöihin ja kattilan käytettävyyteen. Myös muita konsentraattien hävittämismahdollisuuksia tulisi tutkia lisää.

G-CSF-induced remission in two cases of acute myeloid leukemia.

We report on two elderly patients with newly diagnosed acute myeloid leukemia (AML) who were treated in palliative intention because of comorbidities and intermediate or poor risk cytogenetics. Both received G-CSF to reduce the risk of infection related to neutropenia. Interestingly, one patient achieved a full hematological remission and the other a peripheral remission with dramatic reduction of the bone marrow blast count. Although a direct therapeutic effect of myeloid growth factors seems to be unusual in AML, the use of G-CSF or GM-CSF may be recommended in patients such as elderly patients who are not suited for intensive chemotherapy.