Effect of different disinfectants on the microhardness and roughness of acrylic resins for ocular prosthesis

Background: Ocular prosthesis materials should have specific properties for their indication and durability; therefore, it is important to investigate their physical behaviour when affected by several disinfectants. Objectives: This study evaluated the influence of different disinfecting solutions on the microhardness and surface roughness of acrylic resins for ocular prosthesis. Materials and Methods: Fifty samples simulating ocular prostheses were fabricated with N1 resin and colourless resin and divided (n = 10) according to the disinfectant used: neutral soap, Opti-free, Efferdent, 1% hypochlorite (HYC) and 4% chlorhexidine (CHX). Samples were stored in saline solution at 37°C and disinfected during 120 days. Both microhardness and roughness were investigated before, after 60 days and 120 days of disinfection and storage. Microhardness was measured using a microhardner and the roughness with a roughness device. Results: N1 resin showed lower microhardness when compared with colourless resin (p < 0.05). HYC and CHX groups exhibited the highest change of microhardness and roughness values (p < 0.05). An increase in roughness and reduction in microhardness of ocular acrylic resins were observed after both periods of disinfection and storage (p < 0.05). Conclusion: Both disinfection/storage periods affected the microhardness and roughness values of the samples. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

Atrophic gastritis: Risk factor for esophageal squamous cell carcinoma in a Latin-American population

AIM: To study the association between atrophic gastritis (AG) and esophageal squamous cell carcinoma (ESCC) in a Latin-America population. METHODS: A case-control study was performed at two reference Brazilian hospitals including patients diagnosed with advanced ESCC and dyspeptic patients who had been subjected to upper gastrointestinal endoscopy, with biopsies of the gastric antrum and body. All cases with ESCC were reviewed by a single pathologist, who applied standard criteria for the diagnosis of mucosal atrophy, intestinal metaplasia, and dysplasia, all classified as AG. The data on the patients' age, sex, smoking status, and alcohol consumption were collected from clinical records, and any missing information was completed by telephone interview. The association between AG and ESCC was assessed by means of univariate and multiple conditional logistic regressions. RESULTS: Most patients were male, and the median age was 59 years (range: 37-79 years) in both the ESCC and control groups. Univariate analysis showed that an intake of ethanol greater than 32 g/d was an independent risk factor that increased the odds of ESCC 7.57 times (P = 0.014); upon multiple analysis, alcohol intake of ethanol greater than 32 g/d exhibited a risk of 4.54 (P = 0.081), as adjusted for AG and smoking. Smoking was shown to be an independent risk factor that increased the odds of ESCC 14.55 times (P = 0.011) for individuals who smoked 0 to 51 packs/year and 21.40 times (P = 0.006) for those who smoked more than 51 packs/year. Upon multiple analyses, those who smoked up to 51 packs/year exhibited a risk of 7.85 (P = 0.058), and those who smoked more than 51 packs/year had a risk 11.57 times higher (P = 0.04), as adjusted for AG and alcohol consumption. AG proved to be a risk factor that increased the odds of ESCC 5.33 times (95%CI: 1.55-18.30, P = 0.008) according to the results of univariate conditional logistic regression. CONCLUSION: There was an association by univariate conditional logistic regression between AG and ECSS in this sample of Latin-American population. © 2013 Baishideng.

Clinical Satisfaction and Quality of Ceramic Fixed Dentures

It is known that several factors can affect the clinical success and durability of fixed partial dentures. Therefore, the aim of the present study was to present a literature review about the longevity, clinical success, and quality, as well as, patients' and dental surgeons' satisfaction of ceramic fixed dentures. High rate of patients' satisfaction has been observed in relation to the esthetic of ceramic crowns. In addition, the literature has shown that dental ceramics can be used in several clinical situations with high success rate and longevity. Despite of failures and complications of ceramic restorations, nowadays, with the improvement of mechanical properties of such materials, ceramic crowns present a favorable prognosis and can be used in several clinical situations with high success rate, clinical quality, and great patients' satisfaction. © 2013 The American Ceramic Society.

Regular and switching platform: Bone stress analysis with varying implant diameter

The aim of this study was to evaluate stress distribution of the peri-implant bone by simulating the biomechanical influence of implants with different diameters of regular or platform switched connections by means of 3-dimensional finite element analysis. Five mathematical models of an implant-supported central incisor were created by varying the diameter (5.5 and 4.5 mm, internal hexagon) and abutment platform (regular and platform switched). For the cortical bone, the highest stress values (rmax and rvm) were observed in situation R1, followed by situations S1, R2, S3, and S2. For the trabecular bone, the highest stress values (rmax) were observed in situation S3, followed by situations R1, S1, R2, and S2. The influence of platform switching was more evident for cortical bone than for trabecular bone and was mainly seen in large platform diameter reduction.

Maxillary Rehabilitation Using Fixed and Removable Partial Dentures with Attachments: A Clinical Report

Despite requiring dental crown preparation and possible root canal treatment, besides the difficulty of clinical and laboratory repairs, and financial burden, the association between fixed (FPD) and removable partial dentures (RPD) by means of attachments is an important alternative for oral rehabilitation, particularly when the use of dental implants and FPDs is limited or not indicated. Among the advantages of attachment-retained RPDs are the improvements in esthetics and biomechanics, as well as correction of the buccal arrangement of anterior teeth in Kennedy Class III partially edentulous arches. This article describes the treatment sequence and technique for the use of attachments in therapy combining FPD/RPD. © 2013 by the American College of Prosthodontists.

Failure of miniplate osteosynthesis for the management of atrophic mandibular fracture

Fractures of the severely atrophic (<10 mm) edentulous mandible are not common, and these fractures with a vertical height of 10 mm or less have long been recognized as being particularly problematic. Although there are advances in the treatment of the atrophic mandibular fracture, the treatment remains controversial. There are some options for treatment planning because of using small miniplates to large reconstruction plates. However, when the fixation method fails, it causes malunion, nonunion, and/or infection, and sometimes it has been associated with large bone defects. The authors describe a clinical report of a failed miniplate fixation for atrophic mandibular fracture management. The authors used a load-bearing reconstruction plate combined with autogenous bone graft from iliac crest for this retreatment. The authors show a follow-up of 6 months, with union of the fracture line and no complication postoperatively. © 2013 by Mutaz B. Habal, MD.

Stress analysis in oral obturator prostheses: Imaging photoelastic

Maxillary defects resulting from cancer, trauma, and congenital malformation affect the chewing efficiency and retention of dentures in these patients. The use of implant-retained palatal obturator dentures has improved the self-esteem and quality of life of several subjects. We evaluate the stress distribution of implant-retained palatal obturator dentures with different attachment systems by using the photoelastic analysis images. Two photoelastic models of the maxilla with oral-sinus-nasal communication were fabricated. One model received three implants on the left side of the alveolar ridge (incisive, canine, and first molar regions) and the other did not receive implants. Afterwards, a conventional palatal obturator denture (control) and two implant-retained palatal obturator dentures with different attachment systems (O-ring; bar-clip) were constructed. Models were placed in a circular polariscope and a 100-N axial load was applied in three different regions (incisive, canine, and first molar regions) by using a universal testing machine. The results were photographed and analyzed qualitatively using a software (Adobe Photoshop). The bar-clip system exhibited the highest stress concentration followed by the O-ring system and conventional denture (control). Images generated by the photoelastic method help in the oral rehabilitator planning. © 2013 SPIE.

Rehabilitation of maxillary cleft with hybrid obturator prosthesis

The hybrid obturator prosthesis aims to provide a sense of well-being to the patient, offering improvements in speech, chewing, and swallowing. Thus, the retention and stabilization of the prosthesis become decisive factors for the success of the rehabilitation treatment. The objective of this study was to describe the treatment of a 70-year-old man with a congenital maxillary cleft performed through aesthetic and functional prosthetic rehabilitation with hybrid obturator prosthesis. In this study, the fabricated prosthesis achieved its purpose by providing adequate functional and aesthetic conditions to the patient, promoting the reduction of airspace through the sealing of the oronasal communication, with consequent improvement in the quality of life. Copyright © 2013 by Mutaz B. Habal, MD.

Estrus synchronization and fixed time artificial insemination (FTAI) in dairy buffaloes during seasonal anestrus

The aim of this work was to study estrus synchronization and fixed time artificial insemination (FTAI) in dairy buffaloes during season anestrus. One hundred thirty-nine dairy buffaloes in seasonal anestrus were divided in two groups as G1(n=66) and G2(n=73). The protocols for both the groups were the same until day (D)14:D0 administration of 2.0 mg estradiol benzoate and implantation of progesterone device (P4) for 14 days; D14 removal of P4 plus 150 mg of cloprostenol and 400 IU of equine chorionic gonadotropin. On D16, G1 received 10 mg of buserelin and G2 100 mg deslorelin acetate. On D17, both the groups were submitted to FTAI. Ultrasonographic examinations of ovaries were performed on D0, D14, D16 and D17. Results showed that pregnancy rates in G1 and G2 were 20 and 41% (p<0.05) and the ovulation rates were 16.6 and 37%, respectively (p<0.05). The dominant follicle (DF) diameter on D16 was 7.9 mm in G1 and 8.9 mm in G2 (p>0.05). Thirty-five percent of the animals in G1 and 54.1% in G2 showed a diameter DF greater than 8.0 mm on D16 (p>0.05). Thus, it could be concluded that the protocols synchronized the estrus, leading the concentration of the parturitions in the period of low milk production. Deslorelin was more efficient than buserelin due the higher percentage of DF ovulation and higher pregnancy rates.

Informe del Seminario-Taller sobre Políticas para el Control y la Fiscalización de la Contaminación Atmosférica de las Fuentes Fijas de los Sectores Productivo y Energético = Report of the Seminar-Workshop on Policies for the Regulation and Control of Air Pollution from Fixed Sources in the Production and Energy Sectors

Contiene antecedentes, asistencia y organización de los trabajos y resumen de las presentaciones de la reunión que tuvo como objetivo analizar los aspectos jurídicos, institucionales, económicos y tecnológicos de la política de descontaminación ambiental. Incluye lista de documentos presentados y de participantes.

Antecedentes para la formulación e implementación de una política para el control y la fiscalización de la contaminación atmosférica de las fuentes fijas de los sectores productivo y energético = Background information for the formulation and implementation of a policy on the regulation and control of air pollution from fixed sources in the production and energy sectors

Incluye Bibliografía

Avaliação da influência de diferentes materiais oclusais na confecção de próteses fixas implantossuportadas unitárias com diferentes diâmetros dos implantes osseointegrados: estudo pelo método dos elementos finitos tridimensionais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação histológica e imuno-histoquímica do subcutâneo e do alvéolo dentário de ratos com implantes de cimento Portland, MTA e MTA experimental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo cefalométrico com implantes metálicos das alterações esqueléticas, a longo prazo, após o uso do bionator de Balters

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alterações dimensionais da maxila em pacientes com atresia do arco dentário superior tratados com aparelho expansor

Pós-graduação em Ciências Odontológicas - FOAR