The Bauru Group: A continental Cretaceous unit in Brazil - Concepts based on micropaleontological, oxygen isotope and stratigraphical data

The integration of outcrop and subsurface information, including micropaleontological data, facies and sequence stratigraphic studies, and oxygen isotope analysis, allow us to present a new stratigraphic model for the Cretaceous continental deposits of the Bauru Group, Brazil. Thirty-eight fossil taxa were recovered from these deposits, including 29 species of ostracodes and 9 species of charophytes. Seven of these ostracode species and three subspecies are new and formally described here. The associations of Chara barbosai - Ilyocypris cf. riograndensis, found in the Adamantina Formation, and Amblyochara sp. - Neuquenocypris minor mineira nov. subsp., found in the Marília Formation. Ponte Alta Member, represent two distinct groups that are respectively Turonian-Santonian and Maastrichtian (probably Late Maastrichtian) in age. Therefore, a hiatus, encompassing more than 11 Ma, separates those two formations. From bottom to top, four depositional cycles were recognized in the Bauru Group in western São Paulo: cycles 1 and 2 belong to Caiuá Formation (fluvio-lacustrine and lacustrine deposits in the Presidente Prudente region), cycle 3 to the Santo Anastácio and lower Adamantina Formation (respectively fluvial and lacustrine deposits), and cycle 4 to the upper Adamantina Formation (fluvio-lacustrine facies). An erosional unconformity separates the Caiuá and Santo Anastácio Formations (between cycles 2 and 3). The Marília Formation is a distinct unit from the underlying succession; it does not occur in western São Paulo, but is found in restricted areas of São Paulo, Minas Gerais, Mato Grosso do Sul and Goiás States. During the deposition of the Bauru Group (Aptian? to Maastrichtian) the climate was hot and arid-semiarid. Shallow lakes underwent fluctuations in expansion (wet phases) and contraction (dry phases), as well as variations in salinity. During the deposition of the Adamantina Formation (Turonian-Santonian) there were long, dry periods that caused segmentation of large lakes (due to topographic irregularities in the basaltic substrate) and sometimes exposures of the lake floors; when flooded these lake floors were colonized by extensive meadows of single species of charophytes. Small ephemeral ponds, that were hydrochemically unstable and colonized by multiple species of charophytes, were the depositional sites for the marls and mudstones of Ponte Alta Member (Maastrichtian, Late Maastrichtian?). Our micropaleontological age control, combined with the Late Cretaceous ages of volcanic ashes found in the southeastern Brazil coastal basins, and the stratigraphic position of analcimites from the Jaboticabal-SP region, suggest a Late Coniacian-Santonian age for important magmatic events occurred in the interior of Brazil (north-central São Paulo State, Triângulo Mineiro, and southwestern Goiás State).

Preferência alimentar de adultos de Diabrotica speciosa (Ger.) (Coleoptera: Chrysomelidae) por genótipos de feijoeiro

Tests were carried out to evaluate resistance of common bean (Phaseolus vulgaris L.) to Diabrotica speciosa (Ger.) with the genotypes Goiano Precoce, Jalo Precoce, PR 95105146, PR 95105142 (Andean domestication center, AN), Emgopa 201 Ouro and IAPAR 57 (Middle American domestication center, MA). The experiments were conducted in 1998 and 1999, at the farm of UNESP-FCAV, Jaboticabal, SP, Brazil. The genotypes were planted in pots and 20 day-old leaflets were collected and foliar disks were cut of for the test. Two trials, a no-choice test and a free-choice test, were set up in BOD. In free-choice test, two disks of each genotype were kept in a 140-mm-diameter petri dish (total of 12 disks), where 12 adults were confined. In no-choice test, two disks of one genotype and two insects were placed in a 60-mm-diameter petri dish. A field experiment was conducted when 400 adults of D. speciosa were released. Fifteen leaflets per plot were collected 30 days after planting and the leaf area consumption was evaluated. A no-choice experiment was carried out with 20 day-old genotypes protected in individual cages and infested by 10 adults, for 72h. The MA genotypes were the most preferred on feeding tests conducted at BOD, field and individual cages, while the AN genotypes were less eaten.

Cultivation systems and planting seasons effects on the vegetative growing of net melon cultivars

Growth effects of cultivation on soil, sand and commercial substrate, on summer and winter time, of 'Bonus #2', 'Don Carlo's and 'Hy Mark' were assessed. The experiments were conducted in a greenhouse of FCAV-UNESP, in Jaboticabal- SP, Brazil, 21° 15' 22 S, 48° 18'58 W, and an altitude of 595 m, comprising the period from November '99 to April 2000 (Summer), and from July to November 2000 (Winter). On soil cultivation, chemical nutrients were used, and the plants received drip irrigation. On sand, fertigation with recirculation of the nutrient solution were used, and slabs and fertigation with non circulating nutrient solution was used with commercial substrate. 'Bonus #2', grown on sand and in the summer season had improved plant height, internodes length, stem diameter, leaf area and dry matter of shoots and roots. 'Hy Mark', when cultivated on commercial substrate had lower growth. During winter season, the growth was slower.

Net melon cultivars productivity under different cultivation systems, during summer and winter

In order to access the effects of cultivation in soil, sand or a commercial substrate on the productivity of Bonus #2 cultivars, 'Don Carlos' and 'Hy Mark', two experiments were conducted in the greenhouse at FCAV-UNESP, Jaboticabal- SP, Brazil, 21° 15' 22 S, 48° 18'58 W, and altitude of 595 m, from November 1999 to April 2000 (summer), and from July to November 2000 (Winter). For cultivation in soil, chemical nutrients were added, and plants were irrigated with drip irrigation. Fertigation with recirculation of the nutrient solution was used on sand; slabs were used on commercial substrate with the fertigation with non circulating nutrient solution. Bonus #2 cultivar yielded the highest production of marketable fruit, but were later in production, while Hy Mark cultivar had early production but a lower number of fruit per plant. The winter planting yielded higher production of marketable fruit while summer plantings yielded lower number of fruit per plant, but with higher average weigh. The combination between cultivation systems and cultivars yielded higher fruit production in winter.

Productivity of beet and roquette cultivation as a function of time of establishing intercropping

With the aim of evaluating the effect of intercropping on the productivity of beet and roquette crops, a study was conducted in the Section of Vegetable and Aromatic-Medicinal Plants, FCAV-UNESP, Jaboticabal/SP. The treatments consisted of co-cultivations of roquette (Cultivada) and beets (Early Wonder) established at 0, 7, 14 and 21 days after the transplanting of beets, and as monocultures of beets and roquette. The experiments were delineated in a randomized block design. The productivity of beets in monoculture was not superior to that obtained with intercropping with roquette. The production of dry mass of roquette with intercropping was less than that with monoculture and the reduction was more marked with more delayed establishment of co-cultivation. Intercropping established at 0 and 7 days after the transplanting of beets was the most efficient, with indices of efficient use of land of 1.26 and 1.27, respectively.

Productivity of lettuce and radish cultivations as a function of spacing and of time of establishment of intercropping

The experiment was conducted at UNESP, Jaboticabal-SP, during the period of September to November of 2000, with the objective of evaluating the productivity of the cultivation of lettuce and radishes as a function of spacing between plants and of the time of establishment of intercropping. The experimental design was a completely randomized blocks and four replications. The 14 treatments consisted of combinations of spacing between lines (0.30 and 0.40 m), cultivation systems (intercropping and monoculture), and time of sowing of radish seeds to establish intercropping (0, 7 and 14 days after transplant of lettuce). The cultivars of lettuce and radish were, 'Tainá' and 'Crimson Gigante', respectively. A greater yield of commercial radish roots was obtained with intercropping cultivation. The fresh mass of lettuce in monoculture did not differ from that produced with intercropping. These results suggest that intercropping cultivation between these species is advantageous.

Genetic control of fruit-setting percentage of tomatoes tolerant to high temperatures

The aim of present work was to study, through means and variances of generations, the genetic control of fruit-set percentage in tomatoes, in a biparental cross between line Jab-95 (resistant to fruit-set) and 'Caribe' cultivar (susceptible to fruit-set) after being subjected to high temperatures. F1, F2, and backcross generations for both parents (P 1, P2) were produced in a greenhouse at FCAVUNESP, Jaboticabal-SP, Brazil. A randomized complete block experimental design with four replications was used to evaluate the different generations. Estimates of genetic parameters were obtained according to Mather and Jinks (1982). An additive-dominant model was fitted to explain the variation observed. The mean degree of dominance (0.54), indicated incomplete dominance in the direction of increasing fruit-set percentage at high temperatures. The genetic control of fruit-set percentage, at high temperatures, for tomato was found to be oligogenic or polygenic (3.54 genes). The heritability in a limited sense was 83.91%, suggesting that the selection of individuals based on the characteristic evaluated can be efficient.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Physical-chemical characterization of processing tomato fruit

Fruit of 28 tomato cultivars for industrial processing were characterized to identify cultivars with potential for in natura consumption. The experiment was carried out in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), on a Haplorthox soil during June-December. The cultivars used in this study were: H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511. The experimental design was randomized blocks, replicated four times. Ten fruits per plot were analyzed, evaluating the following characteristics: shape (oblong or round); length and diameter (mm); external and internal coloration; presence of fissures; number of loci; pulp thickness (mm); soluble solids content (Brix) and total acidity. Only cultivars Hypeel 108, AG 72, NK 1570, RPT 1570 had oblong fruit. Cultivars which had pulp thicker than 5.5 mm, a characteristic which is directly related to fruit yield for industrial purposes were: Ipa 6, Andino, U 646, H 9553, RPT 1294 and Hypeel 108. Cultivars Ipa 6 and Andino also presented elevated values for length, diameter and pulp thickness, indicating them as quality material for industry or, alternatively, for in natura market. Among the cultivars which presented better values for acidity (higher or equal to 0.3 g citric acid 100 g-1) were RPT 1095, AG 45, H 9553 and Hypeel 45.

Non-nutrient heavy metals in tomato plants cultivated in soil amended with biosolid and sugar-cane bagasse compost

In this study, non-nutrient heavy metal concentrations (Cd, Cr, Ni and Pb) were measured in composts during the composting process, in compost/Red-yellow Latosol mixtures, and in tomato plants. Composts were produced using sugar-cane bagasse, biosolids and cattle manure in the proportions 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 or 0-100-0 (composts with 0, 12.5, 25, 50 and 100% biosolids). The composts were applied to the soil, in 6 treatments and a control (mineral fertilization). Control and the 0% biosolids treatments received inorganic nitrogen and all the treatments received the same amount of N, P and K. Tomato plants were cultivated in 24-L pots, in a green house in Jaboticabal, SP, Brazil. The experiment had a split plot design, in randomized blocks. Cadmium, Cr, Ni and Pb concentrations were determined during the composting process (7, 27, 57, 97 and 127 days after compost mounting), in soil (0 and 164 days after mixing) and plants. The samples were subjected to digestion with HNO 3, H2O2 and HCl and the metals were determined by AAS. Negative correlations were observed between Cd, Cr and Pb in the compost and Cd, Cr and Pb plant uptake, as well as Ni in the compost and Ni concentration in the plants. The concentrations of Cd, Cr, Ni and Pb increased during composting. Only Cd levels increased when compost was applied to the soil. The roots accumulated Cr, Ni and Pb, the stems and leaves, Cd and Ni and the fruits did not accumulate any of the metals studied. The composts with biosolids did not increase Cd, Cr, Ni and Pb uptake by plants.

Desenvolvimento e produtividade da cúrcuma (Curcuma longa L.) em função de doses de nitrogênio e potássio

The objective of the experiment was evaluating the development and production of turmeric, it was carried out at FCAV-UNESP, in Jaboticabal-SP, during 11/18/ 1999 to 7/18/2000, in randomized blocks, with three replications, factorial scheme 5 × 5. The factors evaluated were doses of N (0, 68, 136, 170 and 204 kg.ha-1) and doses of K2O (0, 92, 184, 230 and 276 kg.ha-1). The potassium doses influenced plant-mother's height significantly, answering lineally to the increment in the potassium fertilization. There was significant interaction between nitrogen and potassium on the number of leaves of the sons and total-plant. In the doses of 0 and 92 kg of K2O.ha-1 a lineal increase was observed in the number of leaves with the increment of the applied nitrogen. The potassium doses also influenced the foliar area of the sons and total-plant, reaching values of 3260 and 4971 cm2 per plant, respectively, for the application of 276 kg K2O.ha1. The number of sons had a lineal increment with the growing fertilization of potassium, contemplating on the dry mass of the aerial part of the sons. The production of rhizomes per plant wasn't influenced for the factors evaluated.

Information on Brazilian ornamental species of the genus Tillandsia L. (Bromeliaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nickel in a tropical soil treated with sewage sludge and cropped with maize in a long-term field study

Sewage sludge produced by the SABESP wastewater treatment plant (Companhia de Saneamento Básico do Estado de São Paulo), located in Barueri, SP, Brazil, may contain high contents of nickel (Ni), increasing the risk of application to agricultural soils. An experiment was carried out under field conditions in Jaboticabal, SP, Brazil, with the objective of evaluating the effects on soil properties and on maize plants of increasing rates of a sewage sludge rich in Ni that had been applied for 6 consecutive years. The experiment was located on a Typic Haplorthox soil, using an experimental design of randomized blocks with four treatments (rates of sewage sludge) and five replications. At the end of the experiment the accumulated amounts of sewage sludge applied were 0.0, 30.0, 60.0 and 67.5 t ha-1. Maize (Zea mays L.) was the test plant. Soil samples were collected 60 d after sowing at depths of 0-20 cm for Ni studies and from 0 to 10 cm and from 10 to 20 cm for urease studies. Sewage sludge did not cause toxicity or micronutrient deficiencies to maize plants and increased grain production. Soil Ni appeared to be associated with the most stable fractions of the soil organic matter and was protected against strong extracting solutions such as concentrated and hot HNO3 and HCl. Ni added to the soil by sewage sludge increased the metal concentration in the shoots, but not in the grain. The Mehlich 3 extractor was not efficient to evaluate Ni phytoavailability to maize plants. Soil urease activity was increased by sewage sludge only in the layer where the residue was applied. © 2006 Elsevier Ltd. All rights reserved.

Efeito de níveis de irrigação em substratos para a produção de mudas de ipê-roxo

The aim of this work was to evaluate the ipê-roxo (Tabebuia impetiginosa (Mart.) Standl). seedlings behavior in different substrates and irrigation levels and also study the use of urban waste compost in the substrates. The experiment was conducted in the agricultural engineering department at the Faculdade de Ciências Agrárias e Veterinárias - UNESP, Campus de Jaboticabal, SP. The experimental design used was the completely randomized with 30 treats and 2 replicates, in a 15× 2 factorial arrangement [15 substrates and 2 irrigation levels (100% and 150% of evapotranspiration)]. The substrates were composed by different material combinations: urban waste, Plantmax, tanned cattle manure, vermiculite and soil. For the study of the seedlings development, the following characteristics were evaluated: the seedlings height (H) and stem diameter (D). Evaluations (H and D) were made on 90, 105, 120, 135 and 150 days after sowing. The statistical analysis showed significant differences between the irrigation levels. According to the results, we can conclude that urban waste compost did not increase Blake development. For tested irrigation levels, the statistical analysis showed significant differences with better results for the 150% ET irrigation level compared to 100% ET.