Aerial photo of southern boardwalk at TS/Ph-7b, Taylor Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

The 2008 Terrestrial Vegetation of Biscayne National Parko FL, USA Derived From Aerial Photography, NDVI, and LiDAR

Established as a National Park in 1980, Biscayne National Park (BISC) comprises an area of nearly 700 km2 , of which most is under water. The terrestrial portions of BISC include a coastal strip on the south Florida mainland and a set of Key Largo limestone barrier islands which parallel the mainland several kilometers offshore and define the eastern rim of Biscayne Bay. The upland vegetation component of BISC is embedded within an extensive coastal wetland network, including an archipelago of 42 mangrove-dominated islands with extensive areas of tropical hardwood forests or hammocks. Several databases and vegetation maps describe these terrestrial communities. However, these sources are, for the most part, outdated, incomplete, incompatible, or/and inaccurate. For example, the current, Welch et al. (1999), vegetation map of BISC is nearly 10 years old and represents the conditions of Biscayne National Park shortly after Hurricane Andrew (August 24, 1992). As a result, a new terrestrial vegetation map was commissioned by The National Park Service Inventory and Monitoring Program South Florida / Caribbean Network.

Evaluating High-Resolution Aerial Photography Acquired by Unmanned Aerial Systems for Use in Mapping Everglades Wetland Plant Associations

Mapping of vegetation patterns over large extents using remote sensing methods requires field sample collections for two different purposes: (1) the establishment of plant association classification systems from samples of relative abundance estimates; and (2) training for supervised image classification and accuracy assessment of satellite data derived maps. One challenge for both procedures is the establishment of confidence in results and the analysis across multiple spatial scales. Continuous data sets that enable cross-scale studies are very time consuming and expensive to acquire and such extensive field sampling can be invasive. The use of high resolution aerial photography (hrAP) offers an alternative to extensive, invasive, field sampling and can provide large volume, spatially continuous, reference information that can meet the challenges of confidence building and multi-scale analysis.

Aerial view of SRS-3, Shark River Slough

http://digitalcommons.fiu.edu/fce_lter_photos/1269/thumbnail.jpg

Aerial photo of Southern Shark River Slough

http://digitalcommons.fiu.edu/fce_lter_photos/1273/thumbnail.jpg

Aerial photo of SRS-2

http://digitalcommons.fiu.edu/fce_lter_photos/1272/thumbnail.jpg

Aerial view of Shark River Slough with SRS-2 in the background

http://digitalcommons.fiu.edu/fce_lter_photos/1271/thumbnail.jpg

Design and implementation of a relative localization system for ground and aerial robotic teams

The main focus of this thesis is to address the relative localization problem of a heterogenous team which comprises of both ground and micro aerial vehicle robots. This team configuration allows to combine the advantages of increased accessibility and better perspective provided by aerial robots with the higher computational and sensory resources provided by the ground agents, to realize a cooperative multi robotic system suitable for hostile autonomous missions. However, in such a scenario, the strict constraints in flight time, sensor pay load, and computational capability of micro aerial vehicles limits the practical applicability of popular map-based localization schemes for GPS denied navigation. Therefore, the resource limited aerial platforms of this team demand simpler localization means for autonomous navigation. Relative localization is the process of estimating the formation of a robot team using the acquired inter-robot relative measurements. This allows the team members to know their relative formation even without a global localization reference, such as GPS or a map. Thus a typical robot team would benefit from a relative localization service since it would allow the team to implement formation control, collision avoidance, and supervisory control tasks, independent of a global localization service. More importantly, a heterogenous team such as ground robots and computationally constrained aerial vehicles would benefit from a relative localization service since it provides the crucial localization information required for autonomous operation of the weaker agents. This enables less capable robots to assume supportive roles and contribute to the more powerful robots executing the mission. Hence this study proposes a relative localization-based approach for ground and micro aerial vehicle cooperation, and develops inter-robot measurement, filtering, and distributed computing modules, necessary to realize the system. The research study results in three significant contributions. First, the work designs and validates a novel inter-robot relative measurement hardware solution which has accuracy, range, and scalability characteristics, necessary for relative localization. Second, the research work performs an analysis and design of a novel nonlinear filtering method, which allows the implementation of relative localization modules and attitude reference filters on low cost devices with optimal tuning parameters. Third, this work designs and validates a novel distributed relative localization approach, which harnesses the distributed computing capability of the team to minimize communication requirements, achieve consistent estimation, and enable efficient data correspondence within the network. The work validates the complete relative localization-based system through multiple indoor experiments and numerical simulations. The relative localization based navigation concept with its sensing, filtering, and distributed computing methods introduced in this thesis complements system limitations of a ground and micro aerial vehicle team, and also targets hostile environmental conditions. Thus the work constitutes an essential step towards realizing autonomous navigation of heterogenous teams in real world applications.

Fibrous Aerial Robotics: study of spiderweb strategies for the design of architectural envelopes using swarms of drones and inflatable formworks

La tesi approccia in modo transdisciplinare biologia, architettura e robotica, con la finalità di indagare e applicare principi costruttivi attraverso l’interazione tra sciami di droni che depositano materiale fibroso su strutture gonfiabili di supporto. L’attenzione principale è nello sviluppo (attraverso un workflow computazionale che gestisce sciami di agenti costruttori) di una tettonica che integra struttura, spazio e ornamento all’interno dello stesso processo progettuale, il quale si sviluppa coerentemente dall’ideazione fino alla fabbricazione. Sono stati studiati modelli biologici quali le colonie di ragni sociali, i quali costruiscono artefatti di grandi dimensioni relativamente a quelle del singolo individuo grazie ad un’organizzazione coordinata ed emergente e alle proprietà dei sistemi fibrosi. L’auto-organizzazione e la decentralizzazione, insieme alle caratteristiche del sistema materiale, sono stati elementi indispensabili nell’estrapolazione prima e nella codificazione poi di un insieme di regole adatte allo sviluppo del sistema costruttivo. Parallelamente alla simulazione digitale si è andati a sviluppare anche un processo fisico di fabbricazione che, pur tenendo conto dei vincoli economici e tecnici, potesse dimostrarsi una prova di concetto e fattibilità del sistema costruttivo. Sono state investigate le possibilità che un drone offre nel campo della fabbricazione architettonica mediante il rilascio di fili su elementi gonfiabili in pressione. Il processo può risultare vantaggioso in scenari in cui non è possibile allestire infrastrutture costruttive tradizionali (es. gole alpine, foreste). Tendendo conto dei vincoli e delle caratteristiche del sistema di fabbricazione proposto, sono state esplorate potenzialità e criticità del sistema studiato.

Aerial photo of SRS-4, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

High Formalism: The aerial view and the colour field

Laura Kurgan’s Monochrome Landscapes (2004), first exhibited in the Whitney Museum of American Art in New York City, consists of four oblong Cibachrome prints derived from digital files sourced from the commercial Ikonos and QuickBird satellites. The prints are ostensibly flat, depthless fields of white, green, blue, and yellow, yet the captions provided explain that the sites represented are related to contested military, industrial, and cartographic practices. In Kurgan’s account of Monochrome Landscapes she explains that it is in dialogue with another work from the Whitney by abstract artist Ellsworth Kelly. This article pursues the relationship between formalist abstraction and satellite imaging in order to demonstrate how formalist strategies aimed at producing an immediate retinal response are bound up with contemporary uses of digital information and the truth claims such information can be made to substantiate.

Osservatore e controllore sensorless ad elevate prestazioni per propulsione elettrica di Unmanned Aerial Vehicles

Negli ultimi anni, tra le varie tecnologie che hanno acquisito una sempre maggiore popolarità e diffusione, una di particolare rilevanza è quella degli Unmanned Aerial Vehicles. Di questi velivoli, quelli che stanno riscuotendo maggiore successo sono i multirotori, alimentati esclusivamente da azionamenti elettrici disposti in opportune posizioni della struttura. Particolari sforzi sono stati recentemente dedicati al miglioramento di questa tecnologia in termini di efficienza e precisione, tuttavia quasi sempre si trascura la vitale importanza dello sfruttamento efficiente dei motori elettrici. La tecnica di pilotaggio adottata nella quasi totalità dei casi per questi componenti è il BLDC sensorless, anche se la struttura si dimostra spesso essere PMSM, dunque inadatta all’uso di questa strategia. Il controllo ideale per i PMSM risulterebbe essere FOC, tuttavia per l'implementazione sensorless molti aspetti scontati nel BLDC devono essere affrontati, in particolare bisogna risolvere problemi di osservazione e identificazione. Durante la procedura di avviamento, efficienti strategie di self-commissioning vengono adottate per l’identificazione dei parametri elettrici. Per la fase di funzionamento nominale viene proposto un osservatore composto da diversi componenti interfacciati tra loro tramite un filtro complementare, il tutto al fine di ottenere una stima di posizione e velocità depurata dai disturbi. In merito al funzionamento in catena chiusa, vengono esposte valutazioni preliminari sulla stabilità e sulla qualità del controllo. Infine, per provare la validità degli algoritmi proposti, vengono mostrati i risultati delle prove sperimentali condotte su un tipico azionamento per UAV, pilotato da una scheda elettronica progettata appositamente per l’applicazione in questione. Vengono fornite inoltre indicazioni sull’implementazione degli algoritmi studiati, in particolare considerazioni sull’uso delle operazioni a virgola fissa per velocizzare l'esecuzione.

DESIGN, FABRICATION, AND PERFORMANCE CHARACTERIZATION OF MULTIFUNCTIONAL STRUCTURES TO HARVEST SOLAR ENERGY FOR FLAPPING WING AERIAL VEHICLES

Flapping Wing Aerial Vehicles (FWAVs) have the capability to combine the benefits of both fixed wing vehicles and rotary vehicles. However, flight time is limited due to limited on-board energy storage capacity. For most Unmanned Aerial Vehicle (UAV) operators, frequent recharging of the batteries is not ideal due to lack of nearby electrical outlets. This imposes serious limitations on FWAV flights. The approach taken to extend the flight time of UAVs was to integrate photovoltaic solar cells onto different structures of the vehicle to harvest and use energy from the sun. Integration of the solar cells can greatly improve the energy capacity of an UAV; however, this integration does effect the performance of the UAV and especially FWAVs. The integration of solar cells affects the ability of the vehicle to produce the aerodynamic forces necessary to maintain flight. This PhD dissertation characterizes the effects of solar cell integration on the performance of a FWAV. Robo Raven, a recently developed FWAV, is used as the platform for this work. An additive manufacturing technique was developed to integrate photovoltaic solar cells into the wing and tail structures of the vehicle. An approach to characterizing the effects of solar cell integration to the wings, tail, and body of the UAV is also described. This approach includes measurement of aerodynamic forces generated by the vehicle and measurements of the wing shape during the flapping cycle using Digital Image Correlation. Various changes to wing, body, and tail design are investigated and changes in performance for each design are measured. The electrical performance from the solar cells is also characterized. A new multifunctional performance model was formulated that describes how integration of solar cells influences the flight performance. Aerodynamic models were developed to describe effects of solar cell integration force production and performance of the FWAV. Thus, performance changes can be predicted depending on changes in design. Sensing capabilities of the solar cells were also discovered and correlated to the deformation of the wing. This demonstrated that the solar cells were capable of: (1) Lightweight and flexible structure to generate aerodynamic forces, (2) Energy harvesting to extend operational time and autonomy, (3) Sensing of an aerodynamic force associated with wing deformation. Finally, different flexible photovoltaic materials with higher efficiencies are investigated, which enable the multifunctional wings to provide enough solar power to keep the FWAV aloft without batteries as long as there is enough sunlight to power the vehicle.