Geological map of Potter Peninsula (King George Island, South Shetland Islands, Antarctic Peninsula)

We present here a new geological map of Potter Peninsula (King George Island, South Shetland Islands). Like on adjacent Barton Peninsula, the morphology on Potter Peninsula is predominantly characterized by a glacial landscape with abrasion platforms offshore, in parts steep cliffs along the coast, and a rather smooth, hilly countryside in the interior. Potter Peninsula forms part of the downthrown Warszawa Block. The volcanic sequence cropping out here belongs to the King George Island Supergroup, with an observed local minimum thickness of approx. 90 m (Kraus 2005). The most prominent morphological feature is Three Brothers Hill (196 m), a well known andesitic plug showing conspicuous columnar jointing. It marks the final stage of activity of a Paleogene volcano, whose eruption products (lava flows and pyroclastic rocks), together with hypabyssal intrusions related to the volcanism, make up most of the lithology observed on Potter Peninsula (Kraus 2005). The Three Brothers Hill volcanic complex is eroded down to its deepest levels. Thus, the stratigraphically deepest units from the initial phase of volcanic activity are cropping out in some parts (Kraus & del Valle, in Wienke et al. 2008). The lithology on Potter Peninsula comprises lava flows (~50%), pyroclastic rocks (ash-fallout, pyroclastic flow deposits, volcanic breccia and agglomerates, ~30%) and hypabyssal intrusions (dykes, sills and small subvolcanic intrusive bodies, ~20%). 40Ar/39Ar datings carried out on magmatic dykes from Potter Peninsula indicate a short, but intense intrusive event during the Lutetian (Kraus et al. 2007).

[Calligraphic specimen, 1205?, i.e. 1790 or 1791?].

Exquisite album of calligraphy (muraqqaʻ or murakkaa) with design for a monumental inscription to appear in stone on a commemorative range marker (menzil taşı) of Bilâl Ağa (d.1807?), likely executed by Yesari Mehmed Esad Efendi (d.1798), the great Ottoman master of nastaʻlīq (talik).

[al-Kawākib al-durrīyah fī madḥ khayr al-barīyah, 16th century?].

Fine copy of al-Būṣīrī's poem in praise of the Prophet accompanied by elucidation in Persian and Turkish.

Naẓm al-Jamīʻ al-ṣaghīr, [late 15th century?].

Fine copy of Abū Naṣr al-Farāḥī's (d.1242) versification of al-Jamīʻ al-ṣaghīr fī al-furūʻ, the well-known legal treatise by Muḥammad ibn al-Ḥasan al-Shaybānī (d.804). Excerpts from Kashf al-ẓunūn addressing these two works appear on leaf affixed to 'title page' (p.5).

Qānūnchah fī al-ṭibb, [880, i.e. 1475 or 1476].

Fine copy of al-Jaghmīnī's (d.1344) Qānūnchah, a compendium on medicine and an extract from Ibn Sīnā’s Qānūn. Brockelmann treats this author as distinct from an astronomer of the same name who died in 1221.

al-Asmāʼ al-ḥusná mustakhrajah min al-Qurʼān al-ʻaẓīm wa-Kitāb al-Ṭibb al-nabawī, [15th century?].

A work on prophetic medicine (or the Prophet's medicine) by al-Maqdisī (d.1245) preceded by a short treatise of uncertain authorship on the beautiful names of God.

Nazm-ı Dilârâ, [1231, i.e. 1815 or 1816].

Elegant autograph copy of the versified Persian-Turkish glossary of the müderris Osman Şakir (whose name appears in Īḍāḥ al-maknūn as ʻUthmān Shukrī, d.1818?). Apparently inspired by the popular Tuhfe-yi Vehbî (used for many years in Ottoman schools) of Sünbülzâde Vehbi Mehmet Efendi (d.1809), see opening matter on p.5-15.

Hāẕā Kitāb-i Khvājah Ḥāfiẓ-i Shīrāzī, [1280, i.e. 1863 or 1864].

Richly elegant copy of the Dīvān of the masterful poet Ḥāfiẓ (Khvājah Shams al-Dīn Muḥammad Shīrāzī, d.1390?).

Mathematical modelling

The development of a new process model of cement grinding in two-stage mills is discussed. The new model has been used to simulate cement grinding and predicting mill performance in open and closed circuit configuration. The new model considered the two-compartment mill as perfectly mixed slices in series. The breakage rate function uses the back calculation technique to determine offline using drop weight and abrasion tests.

Using DEM to model ore breakage within a pilot scale SAG mill

The best accepted method for design of autogenous and semi-autogenous (AG/SAG) mills is to carry out pilot scale test work using a 1.8 m diameter by 0.6 m long pilot scale test mill. The load in such a mill typically contains 250,000-450,000 particles larger than 6 mm, allowing correct representation of more than 90% of the charge in Discrete Element Method (DEM) simulations. Most AG/SAG mills use discharge grate slots which are 15 mm or more in width. The mass in each size fraction usually decreases rapidly below grate size. This scale of DEM model is now within the possible range of standard workstations running an efficient DEM code. This paper describes various ways of extracting collision data front the DEM model and translating it into breakage estimates. Account is taken of the different breakage mechanisms (impact and abrasion) and of the specific impact histories of the particles in order to assess the breakage rates for various size fractions in the mills. At some future time, the integration of smoothed particle hydrodynamics with DEM will allow for the inclusion of slurry within the pilot mill simulation. (C) 2004 Elsevier Ltd. All rights reserved.

New insights into ancient environments using dental characters in Australian Cenozoic lungfish

Environmentally-related wear conditions and pathologies affecting the dentition of fossil lungfish from freshwater deposits in Australia have been analysed and compared with similar changes in the dentition of the living Australian lungfish, Neoceratodus forsteri. Fossil populations from the Namba, Etadunna, Wipajiri and Katipiri formations in central Australia, and the Carl Creek Limestone and the Camfield beds in northern Australia were assessed. Tooth plates from populations of living lungfish from the Brisbane River and Enoggera Reservoir in southeast Queensland were analysed for comparison. Tooth plates were measured to determine the numbers of different age groups in each population. They were assessed for abrasion, attrition, spur and step wear, erosion and caries, and for trauma and pathological conditions such as malocclusion, hyperplasia, abscesses, osteopenia and parasitic damage. All of these conditions are related to the environment where the fish lived, are found in living members of the group, and can be compared directly with those of fossil relatives. The results suggest that some of the fossil populations were at risk before climatic changes late in the Cainozoic destroyed their habitats. Some fossil lungfish populations, such as those of the Wipajiri Formation, exhibit active spawning and recruitment, good growth rates and a low incidence of disease and environmentally related damage to the tooth plates. Others, like those of the Katipiri and Namba Formations, include no young, and the adult fish were ageing and show environmentally-related damage to the dentition. Etadunna lungfish had active recruitment, but the tooth plates show a high incidence of attrition and caries. Riversleigh lungfish were actively spawning but did not grow large. Tooth plates from this latter deposit have a high incidence of pathological conditions. Fish from the Camfield Beds, where food was severely limiting, had little serious pathology but high levels of caries. Pathologies among living lungfish are common, but fossil fish were comparatively healthy, with few serious dental problems. Information from studies of fossil lungfish confirms that conservation of the few living species of lungfish depends on the maintenance of clean environments that provide adequate supplies of food and suitable sites for spawning and for the growth of young fish.

Tooth wear: diet analysis and advice

Diet analysis and advice for patients with tooth wear is potentially the most logical intervention to arrest attrition, erosion and abrasion. It is saliva that protects the teeth against corrosion by the acids which soften enamel and make it susceptible to wear. Thus the lifestyles and diet of patients at risk need to be analysed for sources of acid and reasons for lost salivary protection. Medical conditions which put patients at risk of tooth wear are principally: asthma, bulimia nervosa, caffeine addiction, diabetes mellitus, exercise dehydration, functional depression, gastroesophageal reflux in alcoholism, hypertension and syndromes with salivary hypofunction. The sources of acid are various, but loss of salivary protection is the common theme. In healthy young Australians, soft drinks are the main source of acid, and exercise dehydration the main reason for loss of salivary protection. In the medically compromised, diet acids and gastroesophageal reflux are the sources, but medications are the main reasons for lost salivary protection. Diet advice for patients with tooth wear must: promote a healthy lifestyle and diet strategy that conserves the teeth by natural means of salivary stimulation; and address the specific needs of the patients' oral and medical conditions. Individualised, patient-empowering erosion WATCH strategies; on Water, Acid, Taste, Calcium and Health, are urgently required to combat the emerging epidemic of tooth wear currently being experienced in westernised societies.

Analysis of stirred mill performance using DEM simulation: Part 2 - Coherent flow structures, liner stress and wear, mixing and transport

Stirred Mills are becoming increasingly used for fine and ultra-fine grinding. This technology is still poorly understood when used in the mineral processing context. This makes process optimisation of such devices problematic. 3D DEM simulations of the flow of grinding media in pilot scale tower mills and pin mills are carried out in order to investigate the relative performance of these stirred mills. In the first part of this paper, media flow patterns and energy absorption rates and distributions were analysed to provide a good understanding of the media flow and the collisional environment in these mills. In this second part we analyse steady state coherent flow structures, liner stress and wear by impact and abrasion. We also examine mixing and transport efficiency. Together these provide a comprehensive understanding of all the key processes operating in these mills and a clear understanding of the relative performance issues. (C) 2006 Elsevier Ltd. All rights reserved.

Modelling comminution patterns within a pilot scale AG/SAG mill

The patterns of rock comminution within tumbling mills, as well as the nature of forces, are of significant practical importance. Discrete element modelling (DEM) has been used to analyse the pattern of specific energy applied to rock, in terms of spatial distribution within a pilot AG/SAG mill. We also analysed in some detail the nature of the forces, which may result in rock comminution. In order to examine the distribution of energy applied within the mill, the DEM models were compared with measured particle mass losses, in small scale AG and SAG mill experiments. The intensity of contact stresses was estimated using the Hertz theory of elastic contacts. The results indicate that in the case of the AG mill, the highest intensity stresses and strains are likely to occur deep within the charge, and close to the base. This effect is probably more pronounced for large AG mills. In the SAG mill case, the impacts of the steel balls on the surface of the charge are likely to be the most potent. In both cases, the spatial pattern of medium-to-high energy collisions is affected by the rotational speed of the mill. Based on an assumed damage threshold for rock, in terms of specific energy introduced per single collision, the spatial pattern of productive collisions within each charge was estimated and compared with rates of mass loss. We also investigated the nature of the comminution process within AG vs. SAG mill, in order to explain the observed differences in energy utilisation efficiency, between two types of milling. All experiments were performed using a laboratory scale mill of 1.19 m diameter and 0.31 m length, equipped with 14 square section lifters of height 40 mm. (C) 2006 Elsevier Ltd. All rights reserved.

A worldwide correlation for exponential bed particle size variation in subaerial aqueous flows

The particle size of the bed sediments in or on many natural streams, alluvial fans, laboratory flumes, irrigation canals and mine waste deltas varies exponentially with distance along the stream. A plot of the available worldwide exponential bed particle size diminution coefficient data against stream length is presented which shows that all the data lie within a single narrow band extending over virtually the whole range of stream lengths and bed sediment particle sizes found on Earth. This correlation applies to both natural and artificial flows with both sand and gravel beds, irrespective of either the solids concentration or whether normal or reverse sorting occurs. This strongly suggests that there are common mechanisms underlying the exponential diminution of bed particles in subaerial aqueous flows of all kinds. Thus existing models of sorting and abrasion applicable to some such flows may be applicable to others. A comparison of exponential laboratory abrasion and field diminution coefficients suggests that abrasion is unlikely to be significant in gravel and sand bed streams shorter than about 10 km to 100 km, and about 500 km, respectively. Copyright (C) 1999 John Wiley & Sons, Ltd.