Blunt traumatic thoracic aortic injuries: early or delayed repair-results of an American Association for the Surgery of Trauma prospective study

BACKGROUND: The traditional approach to stable blunt thoracic aortic injuries (TAI) is immediate repair, with delayed repair reserved for patients with major associated injuries. In recent years, there has been a trend toward delayed repair, even in low-risk patients. This study evaluates the current practices in the surgical community regarding the timing of aortic repair and its effects on outcomes. METHODS: This was a prospective, observational multicenter study sponsored by the American Association for the Surgery of Trauma. The study included patients with blunt TAI scheduled for aortic repair by open or endovascular procedure. Patients in extremis and those managed without aortic repair were excluded. The data collection included demographics, initial clinical presentation, Injury Severity Scores, type and site of aortic injury, type of aortic repair (open or endovascular repair), and time from injury to aortic repair. The study patients were divided into an early repair (< or = 24 hours) and delayed repair groups (> 24 hours). The outcome variables included survival, ventilator days, intensive care unit (ICU) and hospital lengths of stay, blood transfusions, and complications. The outcomes in the two groups were compared with multivariate analysis after adjusting for age, Glasgow Coma Scale, hypotension, major associated injuries, and type of aortic repair. A second multivariate analysis compared outcomes between early and delayed repair, in patients with and patients without major associated injuries. RESULTS: There were 178 patients with TAI eligible for inclusion and analysis, 109 (61.2%) of which underwent early repair and 69 (38.8%) delayed repair. The two groups had similar epidemiologic, injury severity, and type of repair characteristics. The adjusted mortality was significantly higher in the early repair group (adjusted OR [95% CI] 7.78 [1.69-35.70], adjusted p value = 0.008). The adjusted complication rate was similar in the two groups. However, delayed repair was associated with significantly longer ICU and hospital lengths of stay. Analysis of the 108 patients without major associated injuries, adjusting for age, Glasgow Coma Scale, hypotension, and type of aortic repair, showed that in early repair there was a trend toward higher mortality rate (adjusted OR 9.08 [0.88-93.78], adjusted p value = 0.064) but a significantly lower complication rate (adjusted OR 0.4 [0.18-0.96], adjusted p value 0.040) and shorter ICU stay (adjusted p value = 0.021) than the delayed repair group. A similar analysis of the 68 patients with major associated injuries, showed a strong trend toward higher mortality in the early repair group (adjusted OR 9.39 [0.93-95.18], adjusted p value = 0.058). The complication rate was similar in both groups (adjusted p value = 0.239). CONCLUSIONS: Delayed repair of stable blunt TAI is associated with improved survival, irrespective of the presence or not of major associated injuries. However, delayed repair is associated with a longer length of ICU stay and in the group of patients with no major associated injuries a significantly higher complication rate.

Laser-Sintern. Die Schluesseltechnologie des e-Manufacturing TM

e-Manufacturing™, das ist die schnelle, flexible und kostengünstige Fertigung von Produkten, Formen/Werkzeugen oder Modellen direkt aus elektronischen Daten. e-Manufacturing™ schließt Rapid Prototyping, Rapid Tooling oder Rapid Manufacturing ein, geht aber zugleich weit über den Gedanken der schnellen Verfügbarkeit hinaus. Zwar wird auch in Zukunft die schnelle Produktentwicklung eine immer wichtigere Rolle spielen, bei der e-Manufacturing™ für ein verkürztes Time to Market sorgt, Entwicklungskosten verringert und zur Risikominimierung beiträgt. Darüber hinaus entstehen aber auch neue Geschäftsmodelle, da Kleinserienproduktion, steigende Variantenvielfalt und eine individualisierte Produktion (Mass Customization) plötzlich möglich und wirtschaftlich sind und sich neue Logistikkonzepte wie (Spare) parts on demand entwickeln. Die neue Konstruktionsfreiheit des Laser-Sinterns ermöglicht neue Produktkonzepte. Minimale Einschränkungen durch das Fertigungsverfahren erlauben funktionelle Integration und die Fertigung des „Unmöglichen“, da kreisförmige und lineare Werkzeugbewegungen das Produktdesign nicht mehr beeinflussen bzw. limitieren. Auch die Fertigungskonzepte unterliegen einem Wandel und werden deutlich flexibler. Werkzeuglose Produktion, losgrößenangepasste Fertigung und dezentrale Fertigung on demand sind die Schlagworte der Zukunft. Der vorliegende Beitrag zeigt Beispiele für den erfolgreichen kommerziellen Einsatz von Laser-Sintern in allen Phasen des Produktlebenszyklus. Der Schwerpunkt liegt dabei auf der direkten Herstellung von Funktionsteilen in der Serienfertigung. Die entscheidenden Faktoren für eine erfolgreiche Einführung und Anwendung von e-Manufacturing™ werden diskutiert. Der Beitrag zeigt auf, wie die neuesten technologischen Innovationen im Laser-Sintern, speziell zur Produktivitätssteigerung, das Spektrum der Anwendungsfelder erweitern, in denen dieses Fertigungsverfahren kostengünstige Lösungen bietet.

Cotrimoxazole prophylactic treatment prevents malaria in children in sub-Saharan Africa: systematic review and meta-analysis

OBJECTIVES Cotrimoxazole prophylactic treatment (CPT) prevents opportunistic infections in HIV-infected or HIV-exposed children, but estimates of the effectiveness in preventing malaria vary. We reviewed studies that examined the effect of CPT on incidence of malaria in children in sub-Saharan Africa. METHODS We searched PubMed and EMBASE for randomised controlled trials (RCTs) and cohort studies on the effect of CPT on incidence of malaria and mortality in children and extracted data on the prevalence of sulphadoxine-pyrimethamine resistance-conferring point mutations. Incidence rate ratios (IRR) from individual studies were combined using random effects meta-analysis; confounder-adjusted estimates were used for cohort studies. The importance of resistance was examined in meta-regression analyses. RESULTS Three RCTs and four cohort studies with 5039 children (1692 HIV-exposed; 2800 HIV-uninfected; 1486 HIV-infected) were included. Children on CPT were less likely to develop clinical malaria episodes than those without prophylaxis (combined IRR 0.37, 95% confidence interval: 0.21-0.66), but there was substantial between-study heterogeneity (I-squared = 94%, P < 0.001). The protective efficacy of CPT was highest in an RCT from Mali, where the prevalence of antifolate resistant plasmodia was low. In meta-regression analyses, there was some evidence that the efficacy of CPT declined with increasing levels of resistance. Mortality was reduced with CPT in an RCT from Zambia, but not in a cohort study from Côte d'Ivoire. CONCLUSIONS Cotrimoxazole prophylactic treatment reduces incidence of malaria and mortality in children in sub-Saharan Africa, but study designs, settings and results were heterogeneous. CPT appears to be beneficial for HIV-infected and HIV-exposed as well as HIV-uninfected children.

Tabellen enthaltend die Zeitangaben für den Beginn der Nacht und des Tages für die Breitengrade + 66 bis -38'' : zum Gebrauch f. d. jüd. Ritus

berechnet u. zsgest. von B. Cohn

Tôṣe'ôt ḥayyîm : sēfer kôlēl kōl ofnê tefillôt û-taḥanûnîm le-hitpallēl baʿad ha-ḥôlîm we-ham-mētîm ... bi-lšôn ʿivrî û-vi-lšôn aškenazz i

ʿal yedê Yiṣḥāq Ben-Aryê Yôsēf Dōv ...

Sēfer ha-ḥayyîm : ... û-vô mepôrāš kōl dînê śimḥôt ... be-kōl ʿîseqê ham-mētîm ... we-hôsāfnû ... teḥinnôt û-vaqqāšôt raḥamîm be-vêt ha-ḥayyîm ...

Digitalisat der Ausg. Zulṣbak, 1790/91

Sēfer ha-ḥayyîm : ... we-hû tôrā ḥēsed we-emet še-ʿôśîm ʿim ham-mētîm we-ha-ḥayyîm ... we-mā-šem-mitpallēl ha-ḥôlē we-hag-gôsēs...

[Simon Frankfurt]

Ms. hebr. oct. 66 - Bet ha-beḥirah

Vorbesitzer: Abraham Merzbacher

Ms. Barth. 66 - Homiliar (Sommerteil)

Vorbesitzer: St. Peter Urach; Bartholomaeusstift Frankfurt am Main;

In Börnes Aufsatz: "Juden in Frankfurt a. M." : (Börnes Schriften VI, S. 66 - 70)

L. G.

Simulating Energy Transfer and Upconversion in β-NaYF 4 : Yb 3+ , Tm 3+

The design of upconversion phosphors with higher quantum yield requires a deeper understanding of the detailed energy transfer and upconversion processes between active ions inside the material. Rate equations can model those processes by describing the populations of the energy levels of the ions as a function of time. However, this model presents some drawbacks: energy migration is assumed to be infinitely fast, it does not determine the detailed interaction mechanism (multipolar or exchange), and it only provides the macroscopic averaged parameters of interaction. Hence, a rate equation model with the same parameters cannot correctly predict the time evolution of upconverted emission and power dependence under a wide range of concentrations of active ions. We present a model that combines information about the host material lattice, the concentration of active ions, and a microscopic rate equation system. The extent of energy migration is correctly taken into account because the energy transfer processes are described on the level of the individual ions. This model predicts the decay curves, concentration, and excitation power dependences of the emission. This detailed information can be used to predict the optimal concentration that results in the maximum upconverted emission.

Evidence for Emergency Vaccination Having Played a Crucial Role to Control the 1965/66 Foot-and-Mouth Disease Outbreak in Switzerland.

Foot-and-mouth disease (FMD) is a highly contagious disease that caused several large outbreaks in Europe in the last century. The last important outbreak in Switzerland took place in 1965/66 and affected more than 900 premises and more than 50,000 animals were slaughtered. Large-scale emergency vaccination of the cattle and pig population has been applied to control the epidemic. In recent years, many studies have used infectious disease models to assess the impact of different disease control measures, including models developed for diseases exotic for the specific region of interest. Often, the absence of real outbreak data makes a validation of such models impossible. This study aimed to evaluate whether a spatial, stochastic simulation model (the Davis Animal Disease Simulation model) can predict the course of a Swiss FMD epidemic based on the available historic input data on population structure, contact rates, epidemiology of the virus, and quality of the vaccine. In addition, the potential outcome of the 1965/66 FMD epidemic without application of vaccination was investigated. Comparing the model outcomes to reality, only the largest 10% of the simulated outbreaks approximated the number of animals being culled. However, the simulation model highly overestimated the number of culled premises. While the outbreak duration could not be well reproduced by the model compared to the 1965/66 epidemic, it was able to accurately estimate the size of the area infected. Without application of vaccination, the model predicted a much higher mean number of culled animals than with vaccination, demonstrating that vaccination was likely crucial in disease control for the Swiss FMD outbreak in 1965/66. The study demonstrated the feasibility to analyze historical outbreak data with modern analytical tools. However, it also confirmed that predicted epidemics from a most carefully parameterized model cannot integrate all eventualities of a real epidemic. Therefore, decision makers need to be aware that infectious disease models are useful tools to support the decision-making process but their results are not equal valuable as real observations and should always be interpreted with caution.