Erosion and channel change as factors of landslides and valley formation in Champlain sea clays: The Chacoura river, Quebec, Canada

The Champlain Sea clays of Eastern Canada are incised by numerous rivers. Their slopes have been modified by landslides: on the Chacoura River near Trois-Rivières (Quebec), several large landslide scars, more or less recent, are visible. The role of erosion (channel incision, lateral channel migration and erosion of slopes due to agricultural drainage) as a trigger of these landslides is important. The aim of this study is to understand how erosion and landslides are related to valley development. From a detailed analysis of aerial photographs and DEMs, a map of the phenomena has been drawn by identifying various elements such as landslides, limits of the slope, position of the channel, and the area covered by forest. It is shown that channel change and erosion are strongly linked to landslides by the fact that they change the bank morphology in an unstable way. A slide in itself is a natural way for the slope to achieve stability. But when it occurs in a stream, it creates a disturbance to the stream flow enhancing local erosion which may change the river path and generate more erosion downstream or upstream resulting in more slides. Cross-valley sections and a longitudinal profile show that landslides are a major factor of valley formation. It appears that the upper part of the Chacoura River valley is still unaffected by landslides and has V-shaped sections. The lower part has been subject to intense erosion and many landslide scars can be seen. This shows that the valley morphology is transient, and that future activity is more likely to occur in the upper part of the river. Therefore the identification of areas prone to erosion will help determine the possible location of future large landslides just like the ones that occurred in the lower part.

Basement lithostratigraphy of the Adula nappe: implications for Palaeozoic evolution and Alpine kinematics

The Adula nappe belongs to the Lower Penni- nic domain of the Central Swiss Alps. It consists mostly of pre-Triassic basement lithologies occurring as strongly folded and sheared gneisses of various types with mafic boudins. We propose a new lithostratigraphy for the northern Adula nappe basement that is supported by detailed field investigations, U-Pb zircon geochronology, and whole-rock geochemistry. The following units have been identified: Cambrian clastic metasediments with abundant carbonate lenses and minor bimodal magmatism (Salahorn Formation); Ordovician metapelites associated with amphibolite boudins with abundant eclogite relicts representing oceanic metabasalts (Trescolmen Formation); Ordovician peraluminous metagranites of calc-alkaline affinity ascribed to subduction-related magmatism (Ga- renstock Augengneiss); Ordovician metamorphic volcanic- sedimentary deposits (Heinisch Stafel Formation); Early Permian post-collisional granites recording only Alpine orogenic events (Zervreila orthogneiss). All basement lithologies except the Permian granites record a Vari- scan ? Alpine polyorogenic metamorphic history. They document a complex Paleozoic geotectonic evolution consistent with the broader picture given by the pre- Mesozoic basement framework in the Alps. The internal consistency of the Adula basement lithologies and the stratigraphic coherence of the overlying Triassic sediments suggest that most tectonic contacts within the Adula nappe are pre-Alpine in age. Consequently, me ́lange models for the Tertiary emplacement of the Adula nappe are not consistent and must be rejected. The present-day structural complexity of the Adula nappe is the result of the intense Alpine ductile deformation of a pre-structured entity.

Structural analysis of Turtle Mountain: Origin and influence of fractures in the development of rock slope failures

Large slope failures in fractured rocks are often controlled by the combination of pre-existing tectonic fracturing and brittle failure propagation in the intact rock mass during the pre-failure phase. This study focuses on the influence of fold-related fractures and of post-folding fractures on slope instabilities with emphasis on Turtle Mountain, located in SW Alberta (Canada). The structural features of Turtle Mountain, especially to the south of the 1903 Frank Slide, were investigated using a high-resolution digital elevation model combined with a detailed field survey. These investigations allowed the identification of six main discontinuity sets influencing the slope instability and surface morphology. According to the different deformation phases affecting the area, the potential origin of the detected fractures was assessed. Three discontinuity sets are correlated with the folding phase and the others with post-folding movements. In order to characterize the rock mass quality in the different portions of the Turtle Mountain anticline, the geological strength index (GSI) has been estimated. The GSI results show a decrease in rock mass quality approaching the fold hinge area due to higher fracture persistence and higher weathering. These observations allow us to propose a model for the potential failure mechanisms related to fold structures.

New stratigraphic data from the Lower Penninic between the Adula nappe and the Gotthard massif and consequences for the tectonics and the paleogeography of the Central Alps

New stratigraphic data along a profile from the Helvetic Gotthard massif to the remnants of the North Penninic basin in eastern Ticino and Graubunden are presented. The stratigraphic record together with existing geochemical and structural data, motivate a new interpretation of the fossil European distal margin. We introduce a new group of Triassic facies, the North-Penninic-Triassic (NPT), which is characterised by the Ladinian ``dolomie bicolori''. The NPT was located in-between the Brianconnais carbonate platform and the Helvetic lands. The observed horizontal transition, coupled with the stratigraphic superposition of a Helvetic Liassic on a Briaconnais Triassic in the Luzzone-Terri nappe, links, prior to Jurassic rifting, the Brianconnais paleogeographic domain at the Helvetic margin, south of the Gotthard. Our observations suggest that the Jurassic rifting separated the Brianconnais domain from the Helvetic margin by complex and protracted extension. The syn-rift stratigraphic record in the Adula nappe and surroundings suggests the presence of a diffuse rising area with only moderately subsiding basins above a thinned continental and proto-oceanic crust. Strong subsidence occurred in a second phase following protracted extension and the resulting delamination of the rising area. The stratigraphic coherency in the Adula's Mesozoic questions the idea of a lithospheric m lange in the eclogitic Adula nappe, which is more likely to be a coherent alpine tectonic unit. The structural and stratigraphic observations in the Piz Terri-Lunschania zone suggest the activity of syn-rift detachments. During the alpine collision these faults are reactivated (and inverted) and played a major role in allowing the Adula subduction, the ``Penninic Thrust'' above it and in creating the structural complexity of the Central Alps. (C) 2012 Elsevier B.V. All rights reserved.

Mid- to Late Holocene shoreline reconstruction and human occupation in Ancient Eretria (South Central Euboea, Greece)

Few studies have aimed to reconstruct landscape change in the area of Eretria (South Central Euboea, Greece) during the last 6000 years. The aim of this paper is to partially fill in this gap by examining the interaction be- tween Mid- to Late Holocene shoreline evolution and human occupation, which is documented in the area from the Late Neolithic to the Late Roman period (with discontinuities). Evidence of shoreline displacements is derived from the study of five boreholes (maximum depth of 5.25 m below the surface) drilled in the lowlands of Eretria. Based on sedimentological analyses and micro/macrofaunal identifications, different facies have been identified in the cores and which reveal typical features of deltaic progradation with marine, lagoonal, fluvio- deltaic and fluvial environments. In addition, a chronostratigraphy has been obtained based on 20 AMS 14C radio- carbon dates performed on samples of plant remains and marine/lagoonal shells found in situ. The main sequences of landscape reconstruction in the plain of Eretria can be summarized as follows: a marine environ- ment predominated from ca. 4000 to 3200 cal. BC and a gradual transition to shallow marine conditions is ob- served ca. 3200-3000 cal. BC due to the general context of deltaic progradation west of the ancient city. Subsequently, from ca. 3000 to 2000 cal. BC, a lagoon occupied the area in the vicinity of the Temple of Apollo and the settlement's development was restricted to several fluvio-deltaic levees, thus severely limiting human activities in the plain. From ca. 2000 to 800 cal. BC, a phase of shallow marine presence prevailed and constrained settlement on higher ground, forcing abandonment of the major part of the plain. Finally, since the eighth century BC, the sea has regressed southward and created the modern landscape.

Melt/peridotite interaction in the Southern Lanzo peridotite: Field, textural and geochemical evidence

This paper presents field, petrographic-structural and geochemical data on spinet and plagioclase peridotites from the southern domain of the Lanzo ophiolitic peridotite massif (Western Alps). Spinet lherzolites, harzburgites and dunites crop out at Mt. Arpone and Mt. Musine. Field evidence indicates that pristine porphyroclastic spinet lherzolites are transformed to coarse granular spinet harzburgites, which are in turn overprinted by plagioclase peridotites, while strongly depleted spinet harzburgite and dunite bands and bodies replace the plagioclase peridotites. On the northern flank of Mt. Arpone, deformed, porphyroclastic (lithospheric) lherzolites, with diffuse pyroxenite banding, represent the oldest spinel-facies rocks. They show microstructures of a composite subsolidus evolution, suggesting provenance from deeper (asthenospheric) mantle levels and accretion to the lithosphere. These protoliths are locally transformed to coarse granular (reactive) spinet harzburgites and dunites, which show textures reminiscent of melt/rock reaction and geochemical characteristics suggesting that they are products of peridotite interaction with reactively percolating melts. Geochemical data and modelling suggest that <1-5% fractional melting of spinel-facies DMM produced the injected melts. Plagioclase peridotites are hybrid rocks resulting from pre-existing spinet peridotites and variable enrichment of plagioclase and micro-gabbroic material by percolating melts. The impregnating melts attained silica-saturation, as testified by widespread orthopyroxene replacement of olivine, during open system migration in the lithosphere. At Mt. Musine, coarse granular spinet harzburgite and dunite bodies replace the plagioclase peridotites. Most of these replacive, refractory peridotites have interstitial magmatic clinopyroxene with trace element compositions in equilibrium with MORB, while some Cpx have REE-depleted patterns suggesting transient geochemical features of the migrating MORB-type melts, acquired by interaction with the ambient plagioclase peridotite. These replacive spinet harzburgite and dunite bodies are interpreted as channels exploited for focused and reactive migration of silica-undersaturated melts with aggregate MORB compositions. Such melts were unrelated to the silica-saturated melts that refertilized the pre-existing plagioclase peridotites. Finally, MORB melt migration occurred along open fractures, now recorded as gabbroic dikes. Our data document the complexity of rock-types and mantle processes in the South Lanzo peridotite massif and describe a composite tectonic and magmatic scenario that is not consistent with the ``asthenospheric scenario'' proposed by previous authors. We envisage a ``transitional scenario'' in which extending subcontinental lithospheric mantle was strongly modified (both depleted and refertilized) by early melts with MORB-affinity formed by decompression partial melting of the upwelling asthenosphere, during pre-oceanic rifting and lithospheric thinning in the Ligurian Tethys realm. (C) 2006 Elsevier B.V. All rights reserved.

Mesozoic oceanic terranes of southern Central America : geology, geochemistry and gedynamics

Abstract The Northwestern edge of the modern Caribbean Plate, located in central Middle America (S-Guatemala to N-Costa Rica), is characterized by a puzzle of oceanic and continental terranes that belonged originally to the Pacific façade of North America. South of the Motagua Fault Zone, the actual northern strike slip boundary of the Caribbean Plate, three continental slivers (Copán, Chortis s. str. and Patuca) are sandwiched between two complex suture zones that contain HP/LT mafic and ultramafic oceanic rocks: The Motagua Mélanges to the North, extensively studied in the last ten years and the' newly defined Mesquito Composite Oceanic Terrane (MCOT) to the South. No modem geological data were available for the oceanic terrane located in the southern part of the so called continental "Chortis Block". Classically, the southern limit of this block with the Caribbean Large Igneous Province (CLIP) was placed at a hypothetical fault line connecting the main E-W fault in the Santa Elena Peninsula (N-Costa Rica) with the Hess Escarpment. However, our study in eastern Nicaragua and northwestern Costa Rica evidences an extensive assemblage of oceanic upper mantle and crustal rocks outcropping between the Chortis/Patuca continental blocks and the CLIP. They comprise collided and accreted exotic terranes of Pacific origin recording a polyphased tectonic history. We distinguish: 1- The MCOT that comprises a Late Triassic to Early Cretaceous puzzle of oceanic crust and arc-derived rocks set in a serpentinite matrix, and 2- The Manzanillo and Nicoya Terranes that are made of Cretaceous plateau-like rocks associated with oceanic sediments older than the CLIP. This study has been focused on the rocks of the MCOT. The MCOT comprises the southern half of the former "Chortis Block" and is defined by 4 comer localities characterized by ultramafic and mafic oceanic rocks of Late Triassic, Jurassic and Early Cretaceous age: 1- The Siuna Serpentinite Mélange (NE-Nicaragua), 2- The El Castillo Mélange (Nicaragua/Costa Rica border), 3- DSDP Legs 67 and 84 (Guatemala fore-arc basin), and 4- The Santa Elena Peridiotite (NW-Costa Rica). The Siuna Serpentinite Mélange (SSM) is a HP/LT subduction zone mélange set in a serpentinite matrix that contains oceanic crust and arc-related greenschist to blueschist/eclogite facies metamafic and metasedimentary blocks. Middle Jurassic (Bajocian-Bathonian) radiolarites are found in original sedimentary contact with arc-derived greenstones. Late Jurassic black detrital chert possibly formed in a marginal (fore-arc?) basin shortly before subduction. A phengite 40Ar/39Ar -cooling age dates the exhumation of the high pressure rocks as 139 Ma. The El Castillo Mélange (ECM) is composed of serpentinite matrix with OIB metabasalts and Late Triassic (Rhaetian) red and green radiolarite blocks. Recent studies of the DSDP Legs 67/84 show that the Guatemala/Nicaragua fore-arc basin is composed of a pile of ultramafic, mafic (OIB-like) and arc related rocks with ages ranging from Late Triassic to Campanian. Finally, the Santa Elena peridiotites that mark the limit of the MCOT with the Manzanillo/Nicoya Terranes and correspond to an association of ultramafic rocks that comprise peridiotites, dunites and chromites of abyssal and fore-arc origin. The SSM is the result of a collision between a Middle Jurassic island arc and the Patuca Terrane, a fragment of the Western N-American active continental margin. The Siuna Mélange (SSM) and the South Montagna Mélange share common characteristics with the Pacific N-American suture zone (E-Franciscan and Vizcaino mélanges), in particular, the Mesozoic ages of HP/LT metamorphic and the arc-derived blocks. For us, these mélanges imply an originally continuous, but slightly diachronous suture that affected the entire W-American active margin. It may imply the arrival and collision of an exotic intraoceanic arc (Guerrero-Phoenix) related to the origin of the Pacific Plate that initiated as a back arc basin of this arc. The present disposition of the fragments of this suture zone is the result of a northward shift of the active left-lateral strike slip motion between the N-American and the Caribbean Plates. Résumé Le coin nord-ouest de la Plaque Caraïbe moderne se trouve en Amérique Centrale, entre le sud du Guatemala et le nord du Costa Rica. Cette région est composée d'un puzzle de terrains océaniques et continentaux dont les origines se situent sur la façade pacifique de l'Amérique du Nord. Au sud de la faille de Motagua, la limite septentrionale actuelle, décrochante, de la Plaque Caraïbe, se trouvent 3 copeaux continentaux (Copàn, Chortis s. str. et Patuca) coincés entre deux zones de suture complexes à roches mafiques et ultramafiques qui ont subi un métamorphisme de haute pression/basse température (HP/LT). Il s'agit des Mélanges de Motagua au nord, largement étudiés ces dernières années, et du Mesquito Composite Oceanic Terrane (MCOT), récemment défini par nous, au sud. En vue de l'absence de données géologiques modernes concernant les terrains océaniques qui se trouvent dans la partie sud du "Chortis Block" considérée comme continentale, nous avons dédié cette étude à cette région. Classiquement, la limite méridionale entre le "Chortis Block" et la "Caribbean Large Igneous Province" (CLIP) a été associée à une faille hypothétique reliant la faille E-W de Santa Elena (nord du Costa Rica) à l'Escarpement de Hess. Notre étude au Nicaragua oriental et au Costa Rica nord-occidental a révélé l'existence de larges terrains composés d'assemblages de roches mantéliques et océaniques qui se placent entre les blocs continentaux Chortis/Patuca et le CLIP. Ces assemblages révèlent des terrains collisionnés et accrétés d'origine pacifique enregistrant une histoire tectonique polyphasée. Nous distinguons: 1- Le MCOT, un puzzle de roches océaniques d'arc d'âge Triassique supérieur au Crétacée inférieur, 2- Les terrains de Manzanillo et de Nicoya, des morceaux de plateaux océaniques associés à des sédiments océaniques plus âgés que le CLIP. Cette étude se focalisera sur les roches du MCOT. Le MCOT occupe la moitié sud de l'ancien "Chortis Block" et peut se définir par 4 localités de référence qui montrent des roches mafiques et ultramafiques océaniques d'âges compris entre le Trias supérieur et le Crétacée inférieur. 1- Le Siuna Serpentinite Mélange (NE-Nicaragua), 2- Le El Castillo Mélange (Nicaragua/Costa Rica border), 3- Le DSDP Legs 67/84 (Guatemala fore-arc basin) et 4- La Santa Elena Peridiotite (nord-ouest du Costa Rica). Le Siuna Serpentinite Mélange (SSM) est un mélange de subduction HP/BT dans une matrice de serpentinite. On y trouve des éléments de croûte océanique et d'arc insulaire en faciès de schistes verts et schistes bleus. Des radiolarites du Jurassique moyen se trouvent en contact sédimentaire sur des roches vertes d'arc. En revanche, des cherts noirs détritiques datent du Jurassique supérieur et sont probablement issus d'un bassin marginal (fore-arc ?) peu avant leur subduction, car un âge 40Ar/39Ar de refroidissement des phengites date l'exhumation des roches de haute pression à 139 Ma. Le Mélange d'El Castillo (ECM) est constitué d'une matrice serpentinitique et contient des blocs de metabasaltes OIB et des blocs de radiolarites du Trias terminal. Des études récentes ont repris les roches forées lors des DSDP Legs 67 et 84 et montrent que le soubassement du bassin d'avant-arc du Guatemala-Nicaragua est composé de roches ultramafiques et mafiques (OIB et arc), dont les âges isotopiques vont du Trias au Crétacé supérieur. Finalement, les péridiotites de Santa Elena forment la limite sud du MCOT par rapport aux terrains de Manzanillo et Nicoya. Elles contiennent des serpentinites et localement des dunites et chromites à affinité abyssale et de fore-arc. Le SSM témoigne d'une collision entre un arc insulaire d'âge Jurassique moyen et le Patuca Terrane, un fragment de la marge active nord-américaine. Le SSM et le South Motagua Mélange ont des caractéristiques en commun avec les zones de suture de la façade pacifique de l'Amérique du nord (E-Franciscan et Vizcaino mélanges), notamment les âges Mésozoïques du métamorphisme HP/BT et les blocs de roches d'arc. Ce fait nous conduit à penser qu'il s'agit d'une grande zone de suture qui était à l'origine continue sur toute la marge ouest-américaine, mais légèrement diachrone. Cette suture implique l'arrivée et la collision d'un arc intraocéanique exotique (Guerrero-Phoenix) qui est à l'origine de la Plaque Pacifique qui s'ouvrait en back arc par rapport à celui-ci. La disposition actuelle des fragments de cette suture est due à la migration vers le nord du décrochement actif senestre entre la Plaque nord-américaine et la Plaque Caraïbe. K. Flores, 2009 Mesozoic oceanic terranes of southern central America Résumé Grand Public La présente thèse est le résultat de travaux de terrain effectués de 2005 à 2008 au nord-est et au sud du Nicaragua et au nord du Costa Rica, en Amérique Centrale, des analyses pétrologiques et géochimiques en laboratoire ainsi que de la modélisation de l'évolution géodynamique. La région étudiée se situe en bordure nord - ouest de la Plaque Caraïbe moderne. Dans la majorité des publications récentes cette région est représentée comme un vaste bloc continental (le "Bloc Chortis") qui serait limité, (i) au nord, par la faille décrochante de Motagua, la limite actuelle entre la Plaque Nord-Américaine et la Plaque Caraïbe, et (ii) au sud, par une suture hypothétique qui se trouverait aux confins entre le Nicaragua et le Costa Rica. La région du Costa Rica a été considérée presque entièrement comme une partie du Plateau Caraïbe ("Caribbean Large Igneous Province" (CLIP)). L'étude détaillée des affleurements nous a permis de mettre en évidence : - Au nord-est du Nicaragua (Siuna) : Des roches océaniques datées du Jurassique moyen, grâce aux faunes à radiolaires qui ont été extraites des radiolarites rouges. Ces roches ont subi un métamorphisme de haute pression typique des zones de collision. L'étude radio-isotopique Ar/Ar a permis de dater la collision du Crétacé basal (139 Ma). - Au sud du Nicaragua : Des roches océaniques d'âge Trias terminal (200 millions d'années), également datées à l'aide de faunes à radiolaires. Il s'agit actuellement des roches océaniques les plus anciennes connues de l'Amérique Centrale. - L'étude géochimique et les âges des fossiles démontrent que le tiers septentrional du Costa Rica possède un soubassement construit d'au moins deux terrains (Nicoya et Manzanillo), qui ont des caractéristiques de Plateau océanique (Nicoya) et d'arc volcanique du Crétacé moyen (Manzanillo). Ces deux terrains sont plus anciens que le CLIP. En conclusion, nous constatons que la région étudiée est constituée d'un puzzle de 3 blocs continentaux et d'un vaste terrain océanique composite que nous appelons Mesquito Composite Oceanic Terrane (MCOT). En plus, nous définissons les terrains de Nicoya et de Manzanillo comme plus âgés et distincts du CLIP. Le MCOT est caractérisé par la présence de roches du manteau supérieur (les serpentinites) et de la croûte océanique, ainsi que des morceaux d'arcs, d'âge allant du Trias supérieur au Crétacé. Ce terrain est comparable à d'autres zones de suture de la façade pacifique de l'Amérique du nord, notamment en ce qui concerne les âges Mésozoïques, le métamorphisme de haute pression et l'association de roches mantéliques et crustales océaniques. Ce fait nous conduit à penser qu'il s'agit d'une grande zone de suture qui était à l'origine continue sur toute la marge ouest-américaine. Cette suture implique l'arrivée et la collision d'un arc infra-océanique exotique qui serait à l'origine de la Plaque Pacifique qui se serait ouverte en bassin d'arrière arc par rapport à celui-ci. La disposition actuelle des fragments de cette suture est due à la migration vers le nord du décrochement actif senestre entre la Plaque nord-américaine et la Plaque Caraïbe.

Genesis of the Jurassic carbonate-hosted Pb-Zn deposits of Jebel Ressas (North-eastern Tunisia): Evidence from mineralogy, petrography and trace metal contents and isotope (O, C, S, Pb) geochemistry

The Jebel Ressas Pb-Zn deposits in North-Eastern Tunisia occur mainly as open-space fillings (lodes, tectonic breccia cements) in bioclastic limestones of the Upper Jurassic Ressas Formation and along the contact of this formation with Triassic rocks. The galena-sphalerite association and their alteration products (cerussite, hemimorphite, hydrozincite) are set within a calcite gangue. The Triassic rocks exhibit enrichments in trace metals, namely Pb, Co and Cd enrichment in clays and Pb, Zn, Cd, Co and Cr enrichment in carbonates, suggesting that the Triassic rocks have interacted with the ore-bearing fluids associated with the Jebel Ressas Pb-Zn deposits. The delta(18)O content of calcite associated with the Pb-Zn mineralization suggests that it is likely to have precipitated from a fluid that was in equilibrium with the Triassic dolostones. The delta(34)S values in galenas from the Pb-Zn deposits range from -1.5 to +11.4%, with an average of 5.9% and standard deviation of 3.9%. These data imply mixing of thermochemically-reduced heavy sulfur carried in geothermal- and fault-stress-driven deep-seated source fluid with bacterially-reduced light sulfur carried in topography-driven meteoric fluid. Lead isotope ratios in galenas from the Pb-Zn deposits are homogenous and indicate a single upper crustal source of base-metals for these deposits. Synthesis of the geochemical data with geological data suggests that the base-metal mineralization at Jebel Ressas was formed during the Serravallian-Tortonian (or Middle-Late Miocene) Alpine compressional tectonics.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a CretaceousPaleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late CretaceousOligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Structural analysis, clay mineralogy and K-Ar dating of fault gouges from Centovalli Line (Central Alps) for reconstruction of their recent activity

Between the cities of Domodossola and Locarno, the complex ``Centovalli Line'' tectonic zone of the Central Alps outlines deformation phases over a long period of time (probably starting similar to 30 Ma ago) and under variable P-T conditions. The last deformation phases developed gouge-bearing faults with a general E-W trend that crosscuts the roots of the Alpine Canavese zone and the Finero ultramafic body. Kinematic indicators show that the general motion was mainly dextral associated with back thrusting towards the S. The <2 mu m clay fractions of fault gouges from Centovalli Line consist mainly of illite, smectite and chlorite with varied illite-smectite, chlorite-smectite and chlorite-serpentine mixed-layers. Constrained with the illite crystallinity index, the thermal conditions induced by the tectonic activity show a gradual trend from anchizonal to diagenetic conditions. The <2 and <0.2 mu M clay fractions, and hydrothermal K-feldspar separates all provide K-Ar ages between 14.2 +/- 2.9 Ma and roughly 0 Ma, with major episodes at about 12,8, 6 and close to 0 Ma These ages set the recurrent tectonic activity and the associated fluid circulations between Upper Miocene and Recent. On the basis of the K-Ar ages and with a thermal gradient of 25-30 degrees C/km, the studied fault zones were located at a depth of 4-7 km. If they were active until now as observed in field, the exhumation was approximately 2.5-3.0 km for the last 12 Ma with a mean velocity of 0.4 mm/y. Comparison with available models on the recent Alpine evolution shows that the tectonic activity in the area relates to a continuum of the back-thrusting movements of the Canavese Line, and/or to several late-extensional phases of the Rhone-Simplon line. The Centovalli-Val Vigezzo zone therefore represents a major tectonic zone of the Central-Western Alps resulting from different interacting tectonic events. (C) 2011 Elsevier B.V. All rights reserved.

The thermal circuits of the Argentera Massif (western Alps, Italy): An example of low-enthalpy geothermal resources controlled by Neogene alpine tectonics

This work presents geochemistry and structural geology data concerning the low enthalpy geothermal circuits of the Argentera crystalline Massif in northwestern Italian Alps. I n this area some thermal springs (50-60 degreesC), located in the small Bagni di Vinadio village, discharge mixtures made up of a Na-Cl end-member and a Na-SO4 component. The latter is also discharged by the thermal springs of Terme di Valdieri located some kilometres apart within the same tectonic complex. Both end-members share the same meteoric origin and the same reservoir temperature, which is close to 150 degreesC. Explanations are thus required to understand how they reach the surface and how waters of the same origin and circulating in similar rocks can attain such different compositions. Sodium-sulphate waters discharged at both sites, likely represent the common interaction product of meteoric waters with the widespread granitic-migmatitic rocks of the Argentera Massif, whereas Na-CI waters originate through leaching of mineralised cataclastic rocks, which are rich in phyllosilicatic minerals and fluid inclusions, both acting as Cl- sources. Due to the relatively low inferred geothermal gradient of the region, -25C/km, meteoric waters have to descend to depths of 5.5-6 km to attain temperatures of similar to 150 degreesC. These relevant depths can be reached by descending meteoric waters, due to the recent extensional stress field, which allows the development of geothermal circulations at greater depths than in other sectors of the Alps by favouring a greater fractures aperture. The ascent of the thermal waters rakes place along brittle shear zones. In both sites, the thermal waters emerge at the bottoms of the valleys, close to either the lateral termination of a brittle shear zone at Terme di Valdieri, or a step-over between two en-echelon brittle shear zones at Bagni di Vinadio. These observations attest to a strong control operated on the location of outlet regions by both brittle tectonics and the minima in hydraulic potential inside the fractured massif.

Minerais, métaux, isotopes : recherches archéométriques sur les mines de plomb et d'argent en Valais, Suisse

RESUME Les nombreuses mines de plomb et d'argent du Valais témoignent d'une activité minière importante par le passé, sans toutefois dévoiler ni l'importance des minéralisations, ni l'ancienneté de l'exploitation. La présente recherche a pour but de comprendre pourquoi les grandes mines sont concentrées dans une région, et de déterminer la chronologie de leur exploitation. L'originalité de ce travail réside dans son interdisciplinarité, plus précisément dans l'application des méthodes minéralogiques pour résoudre une problématique historique. Afin d'évaluer les ressources minières en plomb et en argent du Valais, 57 mines et indices ont été repérés et échantillonnés. Les signatures isotopiques du Pb (74 analyses) et les compositions chimiques élémentaires (45 analyses) ont été déterminées. Les plus grandes exploitations se situent dans la nappe de Siviez-Mischabel, au Sud d'une ligne Vallée du Rhône / Val de Bagnes ainsi que dans le Lötschental. Elles sont liées, d'après leur signature isotopique de plomb, à des minéralisations d'âge calédonien (408 à 387 Ma) ou tardi-hercynien (333 à 286 Ma). À ces périodes, l'ancien continent est très lourd et subit une subsidence thermique. Des premières fractures d'extrême importance se forment. Comme il s'agit d'accidents tectoniques majeurs, des gisements de grande extension peuvent se former dans ce contexte. D'autres minéralisations se situent dans les domaines helvétiques (Massif des Aiguilles Rouges, Massif du Mont Blanc et couverture sédimentaire), couvrant une région au Nord de la Vallée du Rhône et du Val d'Entremont. D'âge post-hercynien à tardi-alpin (notons qu'il n'y a pas de minéralisations d'âge tertiaire), elles sont pour la plupart liées à des intrusions granitiques, sources de plomb juvénile. Les mines situées dans ces unités tectoniques sont nettement moins étendues que celles de la nappe de Siviez-Mischabel, ce qui permet de penser que les minéralisations correspondantes le sont également. Les périodes d'exploitation des mines peuvent être déterminées par quatre approches différentes l'archéologie minière, la lecture des textes historiques, l'étude des déchets métallurgiques et la comparaison de la signature isotopique du plomb, que l'on mesure dans un objet archéologique bien daté (monnaie, bijoux etc.), avec celles des minerais. Cette dernière méthode a été appliquée et développée dans le cadre de la présente recherche. Pour ce faire, 221 échantillons d'objet en plomb ou en argent datés entre l'Âge du Fer et le Moyen Age ont été analysés par la méthode des isotopes de plomb et comparés à environ 1800 signatures isotopiques de minerais des gisements les plus importants en Suisse et en Europe. Avant l'époque romaine et jusqu'au 1 er siècle de cette époque, le plomb provient principalement des mines de la péninsule ibérique alors en pleine activité. Un apport des mines d'Europe tempérée, notamment des Vosges, reste à confirmer. A partir du 1" siècle de notre ère, le plomb a principalement été importé en Suisse occidentale de grands centres de productions situées en Allemagne du Nord (région d'Eifel). Les mines de plomb valaisannes, notamment celles de Siviez, débutent leur exploitation en même temps, principalement pour couvrir les besoins locaux, mais également pour l'exportation jusque dans l'arc lémanique et, dans une moindre importance, au-delà. À partir du 4ème siècle, le besoin en plomb a été couvert par un apport des mines locales et par la refonte d'objets anciens. Ce changement d'approvisionnement est probablement lié aux tensions créées par les invasions germaniques durant la seconde moitié du 3' siècle ; le marché suisse n'est dès lors plus approvisionné par le nord, c'est-à-dire par la vallée du Rhin. Quant à l'argent, l'exploitation de ce métal est attestée à partir de la fin du La Tène, peu après l'apparition de ce métal dans la région valaisanne. L'échantillonnage ne couvrant pas l'époque romaine, rien n'est connu pour cette période. A partir du 5" siècle, une exploitation d'argent est de nouveau attestée. Cependant, l'exploitation d'argent des mines locales ne gagne en importance qu'à partir du Moyen Âge avec les frappes monétaires, notamment les frappes carolingiennes et épiscopales valaisannes. Les sources d'argent sont différentes selon leur utilisation : à part quelques exceptions notamment vers la fin du La Tène et au tardo-antique, les bijoux et objets de cultes ont été souvent créés à partir d'argent refondu, contrairement aux monnaies pour lesquelles l'argent provient des mines locales. On note un approvisionnement différent de ce métal pour les objets, notamment les monnaies, selon leur lieu de fabrication : on peut clairement distinguer les objets valaisans de ceux du Plateau Suisse. SUMMARY The many lead and silver mines of the Valais testify of an important mining activity in the past, without however revealing neither the importance of the mineralizations, nor the era of the exploitation. The purpose of this research is to understand why the large mines are concentrated in one region, and to determine the history of their exploitation. The uniqueness of this work lies in its interdisciplinarity, more precisely in the application of mineralogical methods to solve historical problems. In order to evaluate the lead and silver mining resources of the Valais region, 57 mines and ore deposits were located and sampled. The isotope signatures of Pb (74 analyses) and the compositions of the chemical elements (45 analyses) were determined. The largest activities are in the Siviez-Mischabel area, located in the South of the boundary formed by the Rhone, Bagnes and Lotschental valleys. According to their lead isotope signatures, they are linked to mineralizations of the Caledonian (408 to 387 my) or tardi-Hercynian (333 to 286 my) orogenies. In those times, the old continent was very heavy and underwent a thermal subsidence. First fractures of great significance were formed. Through these major tectonic events, large extended ore deposits can be formed. Other mineralizations are found in the helvetic regions situated north of the Rhone and the Entremont valley (the Aiguilles Rouges basement, Mount Blanc basement and the covering sediment). Because they are from post-hercynien to tardi-alpine age (there are no mineralizations of tertiary age), they are mainly linked to granite intrusions, the sources of juvenile lead. The mines found in these tectonic units are significantly less extensive than those of the Siviez-Mischabel area, leading to the assumption that the respective mineralizations extend accordingly. The history of exploitation of the mines can be determined by four different sources: mining archaeology, historical texts, metallurgical waste, and the comparison of the isotope signature of the lead from accurately dated archaeological objects (currency, jewels etc), with those of the ores. This last approach was applied and developed within the framework of this research. The lead isotope signatures of 221 lead or silver objects from the Iron Age to the Middle Age were compared with approximately 1800 samples of ore of the most important ore deposits in Switzerland and Europe. Before the Roman time up to the 1st century, lead comes mainly from the mines of the Iberian Peninsula then in full activity. A contribution of the mines of Central Europe, in particular of the Vosges, remains to be confirmed. From the 1st century on, lead was mainly imported into Western Switzerland from Northern Germany (Eiffel region). The lead mines in the Valais region, in particular those of Siviez, begin their exploitation at the same time, mainly to meet the local needs, but also for export to the lemanic basin and of lesser importance, beyond. As from the 4th century, the need of lead was met by the production from local mines and the recycling of old objects. This change of supply is probably related to the tensions created by the Germanic invasions during second half of the 3rd century; as a consequence, the Swiss market is not supplied any more by the north, i.e. the Rhine valley. Silver production is confirmed starting from the end of La Tene, shortly after the appearance of this metal in the Valais region. Since no objects of Roman origin were analyzed, nothing is known for this period. From the 5th century on, silver production is again confirmed. However, significant silver production from local mines starts only in the Middle Age with the coinage, in particular Carolingian and Episcopal minting from the Valais region. The sources of silver differ according to their use: besides some exceptions in particular towards the end of La Tene and the tardi-Roman, the jewels and objects of worships were often created from recycled silver, contrary to the coins the silver for which comes from the local mines. A different source of silver is observed according to the location of coin manufacture: Objects originating from the Valais region are clearly distinguished from those from the Plateau Suisse. ZUSAMMENFASSUNG Die grosse Zahl von Blei- und Silberminen im Wallis ist Zeugnis einer bedeutenden Bergbautätigkeit, es fehlen aber Hinweise über ihren Umfang und den Zeitraum ihrer Ausbeutung. Die vorliegende Arbeit sucht zu ergründen, warum grosse Minen sich in einer eng begrenzten Region häufen und in welchem Zeitraum sie genutzt wurden. Die Besonderheit der Studie liegt in ihrer Interdisziplinarität, genauer in der Anwendung von mineralogischen Methoden zur Beantwortung historischer Fragestellungen. Zur Beurteilung der Lagerstätten wurden von 57 Minen und Aufschlüssen Proben entnommen oder Nachweise erbracht und mittels 74 Isotopen-Analysen von Blei und 45 chemischen Gesamtanalysen ausgewertet. Die wichtigsten Vorkommen liegen in der Siviez- Mischabel- Decke südlich der Linie Rhonetal- Val de Bagnes, sowie im Lötschental. Die Bleiisotopen- Alter weisen ihre Entstehung der kaledonischen (408 - 387 Mio. J.) oder der spät- herzynischen (333 - 286 Mio. J.) Gebirgsbildungsphase zu. In dieser Periode ist die kompakte Landmasse sehr schwer und erfairt eine thermische Absenkung. Es bilden sich tektonische Brüche von kontinentaler Ausdehnung. Die grossen tektonischen Bewegungen ermöglichen die Bildung von ausgedehnten Lagerstätten. Andere Vorkommen finden sich im Bereich der Helvetischen Alpen (Aiguilles Rouges Massiv, Mont-Blanc-Massiv und Sediment-Decken) im Gebiet nördlich des Rhonetales bis zum Val d'Entremont. Altersmässig sind sie der nach-hercynischen bis zur spät-alpidischen Orogenese zuzuweisen (auffällig ist das Fehlen von Vorkommen im Tertiär) und haben sich meist in der Folge von Granit- Intrusion, dem Ursprung von primärem Blei ausgebildet. Die Bergwerke in diesem Bereich sind deutlich weniger ausgedehnt als jene in der Siviez-Mischabel-Decke und entsprechen wahrscheinlich dem geringen Umfang der zugehörigen Vorkommen. Die Nutzungsperioden der Minen können mit vier verschiedenen Methoden bestimmt werden: Minenarchäologie, Historische Quellen, Auswertung von metallischen Abfällen (Schlacken) und Vergleich der Bleiisotopen-Zusammensetzung von Erzen mit jener von zeitlich gut datierbaren archäologischen Gegenständen (Münzen, Schmuckstücke). Die letztere Methode wurde im Rahmen der vorliegenden Forschungsarbeit entwickelt und angewendet. Zu diesem Zweck wurden an 221 Proben von Blei- oder Silberobjekten, die in die Periode zwischen Eisenzeit und Mittelalter eingestuft werden können, Bleiisotopen- Analysen durchgeführt und mit ca. 1800 Proben aus den wichtigsten Lagerstätten der Schweiz und Europas verglichen. Vor der Römerzeit und bis ins 1. Jahrh. stammt das Blei vornehmlich aus den in jener Zeit in voller Ausbeutung begriffenen Minen der Iberischen Halbinsel. Der Beitrag von Mitteleuropa, besonders der Vogesen, muss noch bestätigt werden. Ab dem 1. Jahrh. nach Chr. wurde die Westschweiz hauptschlich mit Blei aus den grossen Produktionszentren Norddeutschlands, vorwiegend der Eifel, versorgt. In dieser Periode setzt die Ausbeutung der Bleiminen des Wallis, besonders von Siviez, ein. Sie dienen der Deckung des örtlichen Bedarfs aber auch der Ausfuhr in das Gebiet des Genfersees und in einem bescheidenen Rahmen sogar darüber hinaus. Ab dem 4. Jahrhundert wurden vermehrt alte Objekte eingeschmolzen. Dieser Wechsel der Versorgungsquellen war vermutlich eine Folge der Wölkerwanderung in der zweiten Hälfte des 3. Jahrhunderts. Ab diesem Zeitpunkt war Helvetien der Zugang zu den Versorgungsquellen des Nordens, besonders des Rheinlandes, verwehrt. Der Abbau von Silber ist ab dem Ende des La Tène nachgewiesen, nur wenig nach dem Auftreten dieses Metalls im Wallis. Über die Römerzeit können wegen dem Fehlen entsprechender Proben keine Aussagen gemacht werden. Eine erneute Abbauperiode ist ab dem 5. Jahrhundert nachgewiesen. Die Produktion der örtlichen Minen erreicht aber erst im Mittelalter eine gewisse Bedeutung mit der Prägung von Mnzen durch die Karolinger und die Walliser Bischöfe. Die Herkunft des Silbers ist abhängig von dessen Verwendung. Mit wenigen Ausnahmen in der Zeit des La Tène und der späteren Römerzeit wurde für Kunst- und Kult- Gegenstände rezykliertes Silber verwendet, für Münzprägungen neues Silber aus den örtlichen Minen. Von Einfluss auf die Herkunft war auch der Produktionsstandort: Die Objekte aus dem Wallis unterscheiden sich deutlich von jenen des Mittellandes.

Rift-related inheritance in orogens: a case study from the Austroalpine nappes in Central Alps (SE-Switzerland and N-Italy)

The Austroalpine nappe systems in SE-Switzerland and N-Italy preserve remnants of the Adriatic rifted margin. Based on new maps and cross-sections, we suggest that the complex structure of the Campo, Grosina/Languard, and Bernina nappes is inherited largely from Jurassic rifting. We propose a classification of the Austroalpine domain into Upper, Middle and Lower Austroalpine nappes that is new because it is based primarily on the rift-related Jurassic structure and paleogeography of these nappes. Based on the Alpine structures and pre-Alpine, rift-related geometry of the Lower (Bernina) and Middle (Campo, Grosina/Languard) Austroalpine nappes, we restore these nappes to their original positions along the former margin, as a means of understanding the formation and emplacement of the nappes during initial reactivation of the Alpine Tethyan margin. The Campo and Grosina/Languard nappes can be interpreted as remnants of a former necking zone that comprised pre-rift upper and middle crust. These nappes were juxtaposed with the Mesozoic cover of the Bernina nappe during Jurassic rifting. We find evidence for low-angle detachment faults and extensional allochthons in the Bernina nappe similar to those previously described in the Err nappe and explain their role during subsequent reactivation. Our observations reveal a strong control of rift-related structures during the subsequent Alpine reactivation on all scales of the former distal margin. Two zones of intense deformation, referred to as the Albula-Zebru and Lunghin-Mortirolo movement zones, have been reactivated during Alpine deformation and cannot be described as simple monophase faults or shear zones. We propose a tectonic model for the Austroalpine nappe systems that link inherited, rift-related structures with present-day Alpine structures. In conclusion, we believe that apart from the direct regional implications, the results of this paper are of general interest in understanding the control of rift structures during reactivation of distal-rifted margins.

The Caribbean-North America-Cocos Triple Junction and the dynamics of the Polochic-Motagua fault systems: Pull-up and zipper models

The Polochic-Motagua fault systems (PMFS) are part of the sinistral transform boundary between the North American and Caribbean plates. To the west, these systems interact with the subduction zone of the Cocos plate, forming a subduction-subduction-transform triple junction. The North American plate moves westward relative to the Caribbean plate. This movement does not affect the geometry of the subducted Cocos plate, which implies that deformation is accommodated entirely in the two overriding plates. Structural data, fault kinematic analysis, and geomorphic observations provide new elements that help to understand the late Cenozoic evolution of this triple junction. In the Miocene, extension and shortening occurred south and north of the Motagua fault, respectively. This strain regime migrated northward to the Polochic fault after the late Miocene. This shift is interpreted as a ``pull-up'' of North American blocks into the Caribbean realm. To the west, the PMFS interact with a trench-parallel fault zone that links the Tonala fault to the Jalpatagua fault. These faults bound a fore-arc sliver that is shared by the two overriding plates. We propose that the dextral Jalpatagua fault merges with the sinistral PMFS, leaving behind a suturing structure, the Tonala fault. This tectonic ``zipper'' allows the migration of the triple junction. As a result, the fore-arc sliver comes into contact with the North American plate and helps to maintain a linear subduction zone along the trailing edge of the Caribbean plate. All these processes currently make the triple junction increasingly diffuse as it propagates eastward and inland within both overriding plates.