Confinement and soliton solutions in the SL(3) Toda model coupled to matter fields

We consider an integrable conformally invariant two-dimensional model associated to the affine Kac-Moody algebra sl3(ℂ). It possesses four scalar fields and six Dirac spinors. The theory does not possesses a local Lagrangian since the spinor equations of motion present interaction terms which are bilinear in the spinors. There exists a submodel presenting an equivalence between a U(1) vector current and a topological current, which leads to a confinement of the spinors inside the solitons. We calculate the one-soliton and two-soliton solutions using a procedure which is a hybrid of the dressing and Hirota methods. The soliton masses and time delays due to the soliton interactions are also calculated. We give a computer program to calculate the soliton solutions. © 2002 Published by Elsevier Science B.V.

Apical and periapical repair of dogs' teeth with periapical lesions after endodontic treatment with different root canal sealers.

The aim of this study was to evaluate the apical and periapical repair after root canal treatment of dogs' teeth with pulp necrosis and chronic periapical lesion using different root canal sealers. After periapical lesion induction, forty-four root canals of 3 dogs were submitted to biomechanical preparation using 5.25% sodium hypochlorite as an irrigating solution. A calcium hydroxide dressing (Calen PMCC) was applied for 15 days and the root canals were filled using the lateral condensation technique with gutta-percha points and Sealapex, AH Plus or Sealer Plus for sealing. After 180 days, the animals were sacrificed by anesthetic overdose and the obtained histological sections were stained with hematoxylin-eosin for optical microscopic analysis of the apical and periapical repair. The groups filled with Sealapex and AH Plus had better histological repair (p < 0.05) than the group filled with Sealer Plus, that had unsatisfactory results.

Transverse cylindrical grinding of a eutectic alloy

We report herein on a comparison of the performance of two different grinding wheels (conventional and CBN) in the transverse cylindrical grinding of a eutectic alloy. Three cutting conditions were tested: rough, semi-finishing and finishing. The parameters of evaluation were the cutting force, roughness and wheel wear. The optimal cutting force and roughness values were obtained when grinding with the conventional wheel, due to the superior dressing operation performed under every cutting condition tested. Although the CBN wheel presented the best G ratio values, they were lower than expected owing to the inappropriate dressing operation applied. Excessive wheel corner wear was detected in both wheels, caused by the grinding kinematics (transverse grinding) employed. In terms of cutting force and roughness, the conventional wheel proved to be the better choice under the conditions tested. However, in terms of the G ratio, a cost analysis is crucial to determine whether the differences between the wheels justify the use of the CBN wheel, in which case the dressing operation requires improvement.

Desempenho e características da carcaça de tourinhos santa gertrudes confinados, recebendo dietas com alto concentrado e níveis crescentes de polpa cítrica peletizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de carcaças de suínos da raça large white utilizando medidas convencionais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of CSN3 and LGB gene polymorphisms on production traits in beef cattle

The objective of the present study was to estimate the allele and genotype frequencies of the CSN3/Hinfl and LGB/HaeIII gene polymorphisms in beef cattle belonging to different genetic groups, and to determine the effects of these polymorphisms on growth and carcass traits in these animals, which are submitted to an intensive production model. Genotyping was performed on 79 Nelore, 30 Canchim (5/8 Charolais + 3/8 Zebu) and 275 crossbred cattle originating from the crosses of Simmental (n = 30) and Angus (n = 245) sires with Nelore females. Body weight, weight gain, dressing percentage, longissimus dorsi area and backfat thickness were fitted using the GLM procedure, and least square means of the genotypes were compared by the F test. The results showed that the CSN3/Hinfl and LGB/HaeIII polymorphisms did not have any effect on growth or carcass traits (p > 0.05). Copyright by the Brazilian Society of genetics.

Efeito da calagem e sulfato de amônio no algodão. I - Transporte de cátions e ânions no solo

Applying lime on the soil surface in soils managed under no-tillage has caused an excess of basic cations in the most superficial layers of the soil profile. On the other hand, subsoil acidity is considered a constraint to the development of deep plant roots. The objective of this study was to evaluate Ca 2+, Mg 2+, NO 3- and SO 4 2- leaching in the soil profile as affected by liming and top dressing nitrogen fertilization in cotton, grown with straw cover on the soil surface. Cotton plants (Gossypium hirsutum) were grown for 60 days in PVC columns filled with a Distroferric Red Latosol (sand loam Rhodic Oxisol) with liming applied over the straw on the soil surface, incorporated liming 0-20 cm deep, or without liming. Nitrogen was applied at rates of 0, 50, 100 and 150 kg ha -1 as ammonium sulfate. The PVC columns were set up in layers of 0-5, 5-10, 10-20, 20-30 and 30-30 cm, totaling 15.71 dm 3. The ammonium sulfate application caused intense leaching of SO 4 2- in the soil, irrespective of the lime application method. Liming increased the concentration of NO 3 in the 0-20 cm soil layer, whereas the correction of the soil acidity did not affect the NO 3- concentration in the 30-50 cm soil layer. The influence of ammonium sulfate on Ca 2+ leaching below 20 cm was only observed in the soil with incorporated lime. Nitrogen application resulted in extensive Mg 2+ leaching from the soil, regardless of the lime application method. In the soil layer below 30 cm, SO 4 2- presented a higher correlation than NO 3- in the formation of ionic pairs with Ca 2+ and Mg 2+.

Clinical and radiographic evaluation of pulpotomies employing calcium hydroxide and trioxide mineral aggregate

This study utilized clinical and radiographic examinations to compare the effectiveness of calcium hydroxide paste and mineral trioxide aggregate (MTA) for pulpotomies of primary molars in children. Ninety primary molars that showed clinical and radiographic indications for pulpotomy treatment were selected. The pulpotomies were performed in two sessions, using a corticosteroid/ antibiotic solution as therapeutic dressing. The sample was divided into two groups of 45 teeth, in which the pulpal remains were protected with either calcium hydroxide paste (Group 1) or MTA (Group 2). Radiographs were taken immediately and at 3-, 6-, and 12-month follow-up appointments. Three teeth in Group 1 failed after three months, while two cases failed after six months and one more failed at one year. Two failures were found in Group 2 at the 12-month follow-up. These results indicate that both materials may be utilized for pulpotomies in primary teeth.

Associação do hidróxido de cálcio e metronidazol no tratamento de dentes de cães com lesão periapical crônica

One of the primary objectives of endodontic treatment of teeth with pulp necrosis is the elimination of microorganisms from the root canal system, as effectively as possible, especially in cases with chronic periapical lesions. AIM: The purpose of this study was to analyze the response of the periapical tissue of dogs' teeth with chronic periapical lesions to endodontic treatment performed with utilization of metronidazole, calcium hydroxide, and an association of both as root canal dressings. METHODOLOGY: Forty root canals were submitted to pulpectomy and the root canals were kept exposed to the oral environment for 6 months. Then, they were submitted to biomechanical preparation and divided into 4 study groups with 10 specimens: group I - no root canal dressing; group II - calcium hydroxide; group III - metronidazole; group IV - calcium hydroxide associated to metronidazole. After 15 days, the root canals were filled with Fill Canal sealer. After 90 days, the animals were killed and the especimens processed for histological analysis. RESULTS: Calcium hydroxide dressing provided a significantly better outcome compared to other experimental groups (α = 0.01). Also, the results of the association of metronidazole and calcium hydroxide were similar to those observed for the metronidazole group. The worst results were obtained by the no root canal dressing group. CONCLUSION: The use of metronidazole alone or associated with Calcium hydroxide, did not improve periapical healing when compared to Calcium hydroxide dressing.

Use of fibrin glue derived from snake venom in the repair of deep corneal ulcers - Experimental study in dogs (Canis familiaris, Linnaeus, 1758)

Fibrin glue has been researched as an alternative method for tissue synthesis and is known for its capability to promote hemostasis at the application site, good approximation of wound edges and fast healing. The current study consisted in the application of fibrin glue derived from snake venom as treatment for experimental corneal ulcers. Twenty-one dogs had their corneas experimentally prepared through lamellar keratectomy (of standardized diameter and depth). Animals were divided into seven groups of three animals each. Six experimental groups were periodically evaluated and collection was carried out on the 1st, 3rd, 7th, 15 th, 30th and 60th post-operative days, whereas one control group was evaluated throughout the experiment. Analyses consisted in the clinical evolution and in the histopathological study of all operated on eyes. Results indicated that fibrin glue was efficient in repairing keratectomy wounds in dogs and contributed to an earlier healing phenomenon, avoiding edema formation and keeping corneal clearness. The use of fibrin glue derived from snake venom showed to be easy to apply, feasible with animal models and of low cost, avoiding the lesion progress and allowing fast and appropriate corneal healing.

Parcelamento da adubação nitrogenada na cultura do milho irrigado em sistema plantio direto

The purpose of this study was to evaluate the best time for application of N for an irrigated corn crop in a no-tillage system in the State of Alagoas. Three corn hybrids were used (TORK, FORT and BRS-3003) with four application times (days after sowing - DAS) for fertilizing with nitrogen as top dressing, consisting of the following treatments: 1) 120 kg ha-1 at 15 DAS, 2) 60 kg ha-1 at 15 DAS and 60 kg ha-1 at 30 DAS, 3) 120 kg ha-1 at 30 DAS, 4) 60 kg ha-1 at 30 DAS and 60 kg ha -1 at 45 DAS and 5) control treatment without N fertilization. The experimental design was in randomized blocks with four replications in a subdivided plot scheme. The components of the production studied were: final population of plants ha-1, numbers of corn ears ha-1 length of corn ears and number of rows of grains of corn and mass of 1000 grains. The productivities of grains obtained did not present significant differences among the treatments that received fertilization with nitrogen, independent of the time of application and number of split applications. It is concluded that in the notillage system in Alagoas spliting the manuring with nitrogen (top dressing) is not necessary.

Modulation of insulin secretion by physical training during recovery from protein malnutrition in rats

Objective: The purpose of the present study was to examine insulin secretion in rats submitted to protein restriction and nutritional recovery associated or not to physical training. Methods: The experiment was designed in two sets of five weeks each. In the first set the rats were fed a nonnal-protein diet(17%-control group) or a low-protein diet (6%-malnourished group) for five weeks. After this, all animals were fed the 17% protein diet and separated into four groups: sedentary control(SC); trained eontrol(TC); sedentary recovered(SR) and trained recovered(TR). TC and TR rats performed swimming exercise. Results: The results indicated efficiency of the 6% protein diet in producing signs of malnutrition, as reduction in body weight gain and serum albumin levels, as well as liver fat. Serum insulin in the fed state and insulin secretion by isolated pancreatic islets in response to glucose were Keduced,but peripheral sensitivity to insulin was increased and glucose tolerance was not changed in the protein deficient rats, indicating adaptation to malnutrition. Diet protocol for nutritional recovery was efficient in repairing body weight gain, serum albumin and liver fat levels of the previously malnourished rats. Glucose induced insulin release by pancreatic islets remained low after nutritional recovery. Insulin secretion by the islets isolated from rats submitted to exercise training during nutritional recovery was improved when compared with the sedentary animals. Conclusion: This indicates that exercise training may be useful in the treatment of protein calorie malnutrition, concerning to glucose induced insulip secretion.

Fatigue behaviour study on repaired aramid fiber/epoxy composites

Aramid fiber reinforced polymer composites have been used in a wide variety of applications, such as aerospace, marine, sporting equipment and in the defense sector, due to their outstanding properties at low density. The most widely adopted procedure to investigate the repair of composites has been by repairing damages simulated in composite specimens. This work presents the structural repair influence on tensile and fatigue properties of a typical aramid fiber/epoxy composite used in the aerospace industry. According to this work, the aramid/epoxy composites with and without repair present tensile strength values of 618 and 680MPa, respectively, and tensile modulus of 26.5 and 30.1 GPa, respectively. Therefore, the fatigue results show that in loads higher than 170 MPa, both composites present a low life cycle (lower than 200,000 cycles) and the repaired aramid/epoxy composite presented low fatigue resistance in low and high cycle when compared with non-repaired composite. With these results, it is possible to observe a decrease of the measured mechanical properties of the repaired composites.

Nitrogênio em cobertura e molibdênio via foliar em feijoeiro de inverno no sistema plantio direto II - Características agronômicas e produtividade

Nitrogen is the nutrient most uptaken by common bean plant, and molybdenum besides its importance to N fixation process, it is associated to N metabolism. The objective of this work was to evaluate, on common bean crop Pérola cultivar, the effect of N levels application at side dressing (0, 30, 60, 90 and 120 kg ha-1) as well as the leaf application of Mo (0, 80 and 160 g ha-1) at development stadium V3 or V4 under no tillage system. The experimental design was the randomized blocks with 30 treatments and 4 replications. The research was conducted in Selviria-MS on soil previously cropped with corn. The application of nitrogen levels at side dressing provided increasing on dry mass weight, number of pod and seeds per plant and grain yield, in the 2004; the Mo application at V3 or V4 stadia did not effect the production components and grain yield; as well as different doses of Mo depended on the N application at side dressing, in the 2004.

Finishing of flat parts led by lapping kinematics on abrasive disc dressed in agreement with overlap factors

This paper discusses the investigation of an abrasive process for finishing flat workpieces, based on the combination of important grinding and lapping characteristics. Instead of loose abrasive grains between the workpiece and the lapping plate, a resinoid grinding wheel of hot-pressed silicon carbide is placed on the plate of a device resembling a lapping machine. The resin bond grinding wheel is dressed with a single-point diamond. In addition to keeping the plate flat, dressing also plays the role of interfering in the behavior of the process by varying the overlap factor (Ud). It was found that the studied process simplify the set-up and can be controlled more easily than in lapping, whose is a painstaking process. The surface roughness and flatness deviation proved comparable to those of lapping, or even finer than it, with the additional advantage of a less contaminated workpiece surface with a shiny appearance. The process was also monitored by acoustic emission (AE), which indicates to be a promissing and suitable technique for use in this process. Copyright © 2008 by ASME.