KrF pulsed laser deposition of chromium oxide thin films from Cr8O21 targets

Chromium oxides, CrxOy, are of great interest due to the wide variety of their technological applications. Among them, CrO2 has been extensively investigated in recent years because it is an attractive compound for use in spintronic heterostructures. However, its synthesis at low temperatures has been a difficult task due to the metastable nature of this oxide. This is indeed essential to ensure interface quality and the ability to coat thermal-sensitive materials such as those envisaged in spintronic devices. Pulsed Laser Deposition (PLD) is a technique that has the potential to meet the requirements stated above. In this work, we describe our efforts to grow chromium oxide thin films by PLD from Cr8O21 targets, using a KrF excimer laser. The as-deposited films were investigated by X-ray diffraction and Rutherford backscattering spectrometry. Structural and chemical composition studies showed that the films consist of a mixture of amorphous chromium oxides exhibiting different stoichiometries depending on the processing parameters, where nanocrystals of mainly Cr2O3 are dispersed. The analyses do not exclude the possibility of co-deposition of Cr2O3 and a low fraction of CrO2.

Femtosecond laser ablation of dentin

The surface morphology, structure and composition of human dentin treated with a femtosecond infrared laser (pulse duration 500 fs, wavelength 1030 nm, fluences ranging from 1 to 3 J cm(-2)) was studied by scanning electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The average dentin ablation threshold under these conditions was 0.6 +/- 0.2 J cm(-2) and the ablation rate achieved in the range 1 to 2 mu m/pulse for an average fluence of 3 J cm(-2). The ablation surfaces present an irregular and rugged appearance, with no significant traces of melting, deformation, cracking or carbonization. The smear layer was entirely removed by the laser treatment. For fluences only slightly higher than the ablation threshold the morphology of the laser-treated surfaces was very similar to the dentin fracture surfaces and the dentinal tubules remained open. For higher fluences, the surface was more porous and the dentin structure was partially concealed by ablation debris and a few resolidified droplets. Independently on the laser processing parameters and laser processing method used no sub-superficial cracking was observed. The dentin constitution and chemical composition was not significantly modified by the laser treatment in the processing parameter range used. In particular, the organic matter is not preferentially removed from the surface and no traces of high temperature phosphates, such as the beta-tricalcium phosphate, were observed. The achieved results are compatible with an electrostatic ablation mechanism. In conclusion, the high beam quality and short pulse duration of the ultrafast laser used should allow the accurate preparation of cavities, with negligible damage of the underlying material.

KrP laser CVD of chromium oxide by photodissociation of Cr(CO)(6)

This work reports on the synthesis of chromium oxide thin films prepared by photodissociation of Cr(CO)(6) in an oxidizing atmosphere, using a pulsed UV laser (KrF, lambda = 248 nm). The experimental conditions, which should enable the synthesis of CrO2, are discussed and results on the deposition of CrxOy films on Al2O3 (0001) substrates are presented.

Projecto de reabilitação do edificado como ferramenta de dinamização da zona histórica da vila de Sintra

A actual crise mundial tem tido forte impacto nas economias dos países da União Europeia, nomeadamente no sector de prestação de serviços e das obras públicas. A consequente diminuição do poder de compra e as ameaças que pairam sobre a classe média, têm provocado uma forte estagnação no sector imobiliário, da construção civil e no comércio, motores-chave da economia nacional. O objectivo deste trabalho, mais do que procurar uma solução global, foi o encontrar, a nível regional/autárquico e das PME’s, do sector da construção, uma forma de optimizar os recursos e permitir um novo rumo estratégico empresarial. A prossecução deste objectivo levou à criação de um modelo de negócio viável, para Centros Históricos de cidades e vilas, com custos operacionais reduzidos, e para dinamizar o comércio local no seu todo, tendo por base a contratualização de serviços. O conceito de reabilitar edifícios dos Centros Históricos, instalando unidades de negócio com valor acrescentado, obriga para a sua concretização: 1º) Criar o conceito de unidade de negócio descentralizada, originada a partir da reabilitação dos edifícios urbanos degradados, englobando e compatibilizando serviços e facilidades já existentes no Centro Histórico. 2º) Estudar um modelo conceptual que recorra à reabilitação e conversão de várias construções, em pequenas unidades de alojamento turístico, de apoio a uma unidade central (conceito de Hotel-Resort), pequenos comércios artesanais com valor acrescentado, efectuando nestes edificados as adaptações necessárias com respeito pelas estruturas, enquanto Património local. 3º) Contratualizar, com o comércio local (Associação de Comerciantes) a regulamentação de procedimentos similares aos dos Centros Comerciais, com o objectivo de trabalhar em rede, e não isoladamente, na satisfação dos utentes e turistas do Centro Histórico. Criamos desta forma um novo paradigma para o sector, estabelecendo pontes entre a construção, a reabilitação, o comércio e o turismo em zonas históricas.

Reabilitação de um edifício situado na zona histórica do Bairro Alto, Rua da Rosa nº 15

Embora o título desta Dissertação seja “Reabilitação de um edifício situado na zona histórica do Bairro Alto, Rua da Rosa, nº15”, serão apresentados associados a este tema diversos sub-temas a saber, tais como: O enquadramento histórico que deu origem ao estado actual do Bairro Alto, desde os primórdios do nascimento do aglomerado urbano. Inventariação e levantamento das tipologias representativas dos edifícios que constituem o núcleo central do Bairro Alto. Inventariação e levantamento das patologias representativas dos edifícios com a identificação da sua origem e contribuição para a degradação do edificado. As motivações que concorreram para a construção neste Bairro de edifícios de base Monumental, de uma riqueza patrimonial que chegou aos nossos tempos, fruto das trocas comerciais no advento da época dos Descobrimentos e referências aos condicionamentos legais que são colocados às operações reabilitação dos edifícios deste bairro. Abordagem à evolução demográfica no Bairro, assim como ao seu enquadramento, em termos sócio-profissionais e da regeneração da sua população, com base em resultados apurados nos censos à população. Numa fase posterior, apresentar-se-á um estudo síntese de reabilitação de um edifício situado na Rua da Rosa, nº15, que não inclui a elaboração de projecto específico, integrado em quarteirão tipo. Serão apresentadas conclusões finais, através da extrapolação da solução para o edifício em estudo, em primeiro lugar para o quarteirão onde o edifício se encontra integrado e depois para a restante área central do Bairro Alto. Serão também efectuadas referências aos constrangimentos a uma adequada requalificação dos edifícios, que deveria ter por base a unidade “quarteirão”, fruto em grande medida da excessiva densidade de construção, assim como da ocupação excessiva dos solos, que ultrapassa todos os limites admissíveis do ponto de vista urbanístico e que entra em “conflito” com os actuais regulamentos urbanísticos aplicáveis às novas zonas a urbanizar, pelo que e em face da transparência, é urgente a elaboração de um Regulamento que não levantasse duvidas aos promotores imobiliários, quando tencionassem intervir em operações de reabilitação no edificado.

Ageing effects on the wettability behavior of laser textured silicon

In the present work we investigate the ageing of acid cleaned femtosecond laser textured < 100 > silicon surfaces. Changes in the surface structure and chemistry were analysed by Rutherford backscattering spectrometry (RBS) and X-ray photoelectron spectroscopy (XPS), in order to explain the variation with time of the water contact angles of the laser textured surfaces. It is shown that highly hydrophobic silicon surfaces are obtained immediately after laser texturing and cleaning with acid solutions (water contact angle >120 degrees). However these surfaces are not stable and ageing leads to a decrease of the water contact angle which reaches a value of 80 degrees. XPS analysis of the surfaces shows that the growth of the native oxide layer is most probably responsible for this behavior. (C) 2010 Elsevier B.V. All rights reserved.

Desilication of MOR zeolite: Conventional versus microwave assisted heating

MOR zeolites were modified via desilication treatments with NaOH, under conventional and microwave heating. The samples were characterized by powder X-ray diffraction, (27)Al and (29)Si NMR spectroscopy. TEM and N(2) adsorption at -196 degrees C. The acidity of the samples and the space available inside the pores were evaluated through a catalytic model reaction, the isomerization of m-xylene, for which the profiles of the coke thermal decomposition were also analyzed. Powder X-ray diffraction and (29)Si and (27)Al MNR results show that in comparison with conventional heating, microwave irradiation (a less time consuming process) leads to identical amount of Si extraction from the zeolite framework. With this treatment. in addition to the customary mesopores development promoted by conventional heating, a partial conversion of the zeolite microporosity into larger micropores, is observed. The microwave irradiated and conventionally heated samples show different catalytic behavior in the m-xylene isomerization model reaction. It was observed that, by controlling the experimental conditions, it is possible to obtain samples with catalytic properties closer to the parent material, which is also confirmed by the respective coke analysis. (C) 2011 Elsevier B.V. All rights reserved.

Methods for automatic and assisted image annotation

Personal memories composed of digital pictures are very popular at the moment. To retrieve these media items annotation is required. During the last years, several approaches have been proposed in order to overcome the image annotation problem. This paper presents our proposals to address this problem. Automatic and semi-automatic learning methods for semantic concepts are presented. The automatic method is based on semantic concepts estimated using visual content, context metadata and audio information. The semi-automatic method is based on results provided by a computer game. The paper describes our proposals and presents their evaluations.

Estimativa de populações canina e felina domiciliadas em zona urbana do Estado de São Paulo

OBJETIVO: Dada a importância do conhecimento acerca da população de cães e gatos domiciliados para o adequado planejamento e avaliação das ações de controle da raiva em áreas urbanas, propõe-se a utilização de um valor preciso de estimativa dessas populações com base em indicadores populacionais humanos. MÉTODOS: Foi calculada a razão entre as populações humana e animal (canina e felina) por meio de inspeções domiciliares, no Município de Taboão da Serra, SP. O município foi dividido em duas áreas homogêneas distintas socioeconomicamente, de acordo com o algoritmo da média k, de modo a permitir a comparação das razões homem:animal (cão e gato) das áreas homogêneas. RESULTADOS: A razão entre a população humana e a população canina foi 5,14 e a entre a humana e a felina foi 30,57. Não foi observada diferença significativa ao comparar-se as razões entre as populações humana e animal das áreas homogêneas. CONCLUSÕES: A adoção de uma metodologia de estimativa populacional canina e felina domiciliada, baseada em indicadores populacionais humanos, é a mais indicada e facilmente exeqüível quando comparada ao censo canino.

Avaliação do risco cardiovascular global numa população da zona Norte do País

As doenças cardiovasculares lideram as causas de mortalidade em Portugal. Os factores de risco (FR) associados são sexo masculino, idade avançada, hipertensão arterial, tabagismo e dislipidemias, cuja sinergia amplifica o risco cardiovascular global (RCG). Realizou-se um rastreio em indivíduos da região Norte de Portugal, com o objectivo de determinar o RCG, pela tabela derivada do projecto SCORE. Verificou-se excesso de peso e pressão arterial elevada em mais de metade da amostra. Observou-se que RCG passa a alto risco acima dos 50 anos. O RCG permite estimar a interacção de FR individuais, permitindo definir estratégias interventivas, com potenciais ganhos em saúde.

Novel method using a laser scanning cytometer for detection of Mycobacteria in clinical samples

In order to evaluate the capacity of laser scanning cytometry (LSC) to detect acid-fast bacilli directly on clinical samples, a comparison between Kinyoun-stained smears analyzed under light microscopy and propidium iodide-auramine-stained smears analyzed by LSC was performed. The results were compared with those for culture on BACTEC MGIT 960. LSC is a new, reliable methodology to detect Mycobacteria.

Are known cyanotoxins involved in the toxicity of picoplanktonic and filamentous north atlantic marine cyanobacteria?

Eight marine cyanobacteria strains of the genera Cyanobium, Leptolyngbya, Oscillatoria, Phormidium, and Synechococcus were isolated from rocky beaches along the Atlantic Portuguese central coast and tested for ecotoxicity. Strains were identified by morphological characteristics and by the amplification and sequentiation of the 16S rDNA. Bioactivity of dichloromethane, methanol and aqueous extracts was assessed by the Artemia salina bioassay. Peptide toxin production was screened by matrix assisted laser desorption/ionization time of flight mass spectrometry. Molecular analysis of the genes involved in the production of known cyanotoxins such as microcystins, nodularins and cylindrospermopsin was also performed. Strains were toxic to the brine shrimp A. salina nauplii with aqueous extracts being more toxic than the organic ones. Although mass spectrometry analysis did not reveal the production of microcystins or other known toxic peptides, a positive result for the presence of mcyE gene was found in one Leptolyngbya strain and one Oscillatoria strain. The extensive brine shrimp mortality points to the involvement of other unknown toxins, and the presence of a fragment of genes involved in the cyanotoxin production highlight the potential risk of cyanobacteria occurrence on the Atlantic coast.

Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces

The aim of the present work was to investigate the wetting behaviour of biomedical grade Ti-6Al-4V alloy surfaces textured by a femtosecond laser treatment. The material was treated in ambient atmosphere using an Yb: KYW chirped-pulse-regenerative amplification laser with a wavelength of 1030 nm and a pulse duration of 500 fs. Four main types of surface textures were obtained depending on the processing parameters and laser treatment method. These textures consist of: (1) nanoscale laser-induced periodic surface structures (LIPSS); (2) nanopillars; (3) a bimodal roughness distribution texture formed of LIPSS overlapping microcolumns; (4) a complex texture formed of LIPSS overlapping microcolumns with a periodic variation of the columns size in the laser scanning direction. The wettability of the surfaces was evaluated by the sessile drop method using distilled-deionized (DD) water and Hank's balanced salt solution (HBSS) as testing liquids. The laser treated surfaces present a hydrophilic behaviour as well as a high affinity for the saline solution, with equilibrium contact angles in the ranges 24.1-76.2. for DD water and 8.4-61.8. for HBSS. The wetting behaviour is anisotropic, reflecting the anisotropy of the surface textures. (c) 2012 Elsevier B.V. All rights reserved.

Structural, electrical and magnetic studies of Co:SnO2 and (Co,Mo):SnO2 films prepared by pulsed laser deposition

Here we report on the structural, optical, electrical and magnetic properties of Co-doped and (Co,Mo)-codoped SnO2 thin films deposited on r-cut sapphire substrates by pulsed laser deposition. Substrate temperature during deposition was kept at 500 degrees C. X-ray diffraction analysis showed that the undoped and doped films are crystalline with predominant orientation along the [1 0 1] direction regardless of the doping concentration and doping element. Optical studies revealed that the presence of Mo reverts the blue shift trend observed for the Co-doped films. For the Co and Mo doping concentrations studied, the incorporation of Mo did not contribute to increase the conductivity of the films or to enhance the ferromagnetic order of the Co-doped films. (C) 2012 Elsevier B.V. All rights reserved.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating. (C) 2013 Elsevier Ltd. All rights reserved.