Obtenção e caracterização de suporte de regeneração óssea de dióxido de titânio

Due to complications caused by metallic implants in the replacement of bone tissue, the biological application of ceramics raised and became a viable alternative. The titania has the ability to promote bone tissue regeneration based on its structure, mechanical and biologically properties compatibility. The present work aims at obtaining and characterization of Titania (TiO2) porous ceramics produced by the polymeric sponge method (replica method). Polyurethane sponge with 10 ppi and 15 ppi (pores per linear inch) were used. The process differentiation is the air blower used to remove excess slurry. The ceramics sponges were dried in an oven, then pre-sintered at 1000 o C and sintered at 1450 o C. The effect of direct sintering at 1450 o C was also assessed. The percentage of solids used to prepare the slurry was 40 to 45% by weight. To increase the surface porosity of the sponge, 20% of starch was added. There was difficulty on controlling the thickness of the slurry layers on the sponge which resulted in the variation of samples mechanical resistance. Despite this, the results obtained are quite promising for the proposed use, indicating that it is possible to obtain titania sponges with an apparent porosity of around 60%, a bulk density ranging from 40 to 47% and a compressive strength resistance – that with better control of layers depositions – can vary from 1 to 4 MPa

Modelo tectono-estrutural dos campos de petróleo Namorado, Cherne e Albacora

The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation

Produção de eletrodos em carbono vítreo monolítico e reticulado a partir da resina furfurílica dopada com cobre

The glassy carbon is a material with a huge technological evolution. Due to its lightness, biocompatibility and their thermal and electrical properties this material finds applications in several industrial fields such as electronics, medical, aerospace and chemical. In order to explore the conductive properties of glassy carbon for use as modified electrodes, the present work aims the processing of monolithic and reticulated glassy carbon with colloidal copper for use in electrochemical applications. First, the best parameters for the cure of furfuryl alcohol resin doped were established through viscosimetry measurements and pressurized differential scanning calorimetry. The analysis of the micrographs of the cured resins show that copper concentrations above 3% weight, generate higher porosity in the material. The characterizations of the monolithic and reticulated glassy carbon resulting from carbonization were performed by scanning electron microscopy (SEM), Raman and Electrochemical impedance spectroscopy, and although it was not possible to detect the presence of copper by SEM, the influence of these particles have been observed by Raman and FT-IR spectra and electrochemical behavior of the material. The decrease in conductivity of monolithic and reticulated glassy carbon in the presence of copper may be related to the defects caused by the presence of copper in the structure of the material.

Vitrocerâmicas porosas via conformação e consolidação com amidos

The search for new methods of manufacture of glass-ceramics with controlled porosity and permeability is interesting of the industrial and commercial point of view, and a challenge of great complexity. Porous glass-ceramics produced by sintering and crystallization of glasses can find applications, for example, as filters, materials with bactericidal properties, bio-implants, as catalytic and enzymes supports, among others. An alternative and low cost method of ceramic manufacture reaching different levels of porosity, for diverse purposes, is the conformation assisted by addition of starch, known as consolidation with starch. The objective of this project is to study the process of conformation with starch for making porous glass-ceramics from a commercial glass in the system Na2O-CaO-SiO2, whose kinetics of sintering by viscous flow and surface crystallization are known. The method of conformation with starches is innovative for glass-ceramics and its development opens the way for obtaining a new class of materials. We found a possible route for the production of porous compacts of glass particles, from the powder preparation to the removal of starch. It was observed that a glass powder obtained by dry milling in a ball mill with alumina balls for 24 h, afterwards mixed with water in an eccentric ball mill for 2 h, without the addition of a deflocculant, and subsequently mixed with starch also in an eccentric ball mill for 5 min resulted in slurries stable against sedimentation

Preparação de substratos de carbeto de silício para fins aeroespaciais

This conclusion thesis has the objective of produce substrates of Silicon Carbide from the powder of SiC for aerospace use. The powder of SiC was pressed in cylindrical form by the process called “wet way”. For the inicial pressing process was used a uniaxial squeezer and after that was used a isostatic squeezer, after that the samples were synthesized. The next step was the machining and polishing to improve the features of the surface of the sample. Then the roughness was measured, as also the Arquimedes method and optical microscopy and scanning eletron microscopy. Some innovations were done, in one of the lots little vacancys were done with organic material or silicon to reduce the weight of the sample; and the other innovation were the use of a slip film of SiC on the surface of the sample, that were after synthesized with LASER to reduce the roughness, in this samples the roughness were reduce in 50 % if compared with the other samples

Efeito do fornecimento de diferentes níveis de alumínio dietético na qualidade óssea de codornas poedeiras (Coturnix japonica)

O alumínio está presente de forma marcante em nosso cotidiano, com várias possibilidades de contaminação para o ser humano e animais, através da ingestão de alimentos ou aditivos presentes nos alimentos ou, também, através do uso de medicamentos. Por apresentar uma forte carga elétrica, um forte poder de polarização e características similares com elementos da hidroxiapatita, o alumínio age como um competidor de nutrientes na matriz óssea, Por isso, ele pode ser causa danos à saúde dos seres vivos, como a osteoporose. Diante disso, a presente pesquisa teve como objetivos estudar a influência de diferentes níveis de alumínio na dieta de codornas poedeiras, sobre as características físicas e químicas de seus ossos. A densidade e a porosidade óssea foram determinadas pelo método de imersão em água, utilizando o princípio de Arquimedes. Os resultados obtidos mostraram que concetrações até 20 mg de alumínio por kg de ração fornecida causa uma diminuição na densidade óssea e volta a aumentar para concetrações maiores que este limiar. A porosidade óssea, segue o inverso da densidade. Ela aumenta com concetrações até 20 mg de alumínio por kg de ração fornecida e volta a diminuir para concetrações menores

Litofácies e relações estratigráficas da formação Aquidauana no nordeste da Bacia do Paraná - São Sebastião do Paraíso (MG)

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Análise física da estrutura do tecido ósseo bovino

There are diseases in vertebrates associated with the structure of bone tissue that directly affect the locomotor system of the animal. Being a endoskeleton, the diagnosis of these diseases becomes difficult in vivo. The characterization of the physical structure of the bone tissue of healthy animals becomes a major tool in the diagnosis comparison of live animals. Thus, the objective of this work is to determine the average value of the key physical properties of the bone structure used in the clinical diagnosis, such as: bone density, porosity, and mass attenuation coefficient of 59.6 keV photons of bone tissue and bovine and equine check variations in these values. The samples were provided by the pathology department of the Faculty of Veterinary Medicine and Zootechny of Botucatu-SP, which are of one male equine and one female bovine animals, using the radio and metacarpus, together with these materials were supplied the historic them. They were withdrawn ten samples in cuts of 10cm over the bone . These samples were submitted to the wet method of immersion in water for the density, by the method of attenuation of gamma radiation of radioisotope 241Am, it is estimated the mass attenuation coefficient, and then were dried in the oven for determining the content moisture. In determining the porosity of the samples was tight ground, in order to obtain the density of particles. The results for the mass attenuation coefficient of gamma radiation to the levels of saturated humidity, environment humidity, dry humidity respectively 0289 ± 0039; 0286 ± 0040 and 0297 ± 0042. And the density of particles was 2.2691 g/cm3

Estudo dos parâmetros físicos na fluidização em um leito gás sólido

Through measurements of basic parameters for determining the fluidization regime, as particle size, minimum fluidization velocity, bed porosity, etc., This paper analyze the mass distribution of the phases of the bed to be discussed in relation to: the flow gas physical properties of the solid particles and the forces acting on the solid particles circulating within the bed, as the weight force, buoyancy and drag forces (Stokes' Law). Due to the weight force is constant, open up the discussion about which of the other two forces, buoyancy and drag force, influencing the behavior of the bed. We used the photographic method to realize the statistical analyzes. Therefore, we can conclude what changes can be made more convenient in fluidizing the bed to obtain the highest efficiency for a good mixing used in industrial processes

Sintese e caracterização da resina fenol-furfurílica para a obtenção de carbono vítreo monolítico

The monolithic glassy carbon is a carbonaceous material, isotropic, non graphitizable obtained by means of carbonization of resins up to 1000 °C. The good physicochemical properties make this material applied in several areas such as aerospace, medicine, electronics, chemistry, among others. It has generally been processed from the use of phenolic and furfuryl alcohol resins. These resins have high crosslink density and high fixed carbon content and are therefore widely applied in aerospace. The combination phenol / furfuryl alcohol resins search for obtaining the most suitable process for the glass-like carbon processing with phenolic resins currently available and of lower cost and easier to synthesize than the furfuryl alcohol resin. The main objective of this work is to obtain a phenol-furfuryl resin with high fixed carbon content combined with low porosity of the material. Different synthesis routes have been adopted along with thermal analysis techniques, FTIR and image analysis. The resin obtained through partial synthesis process presented the characteristics sought in this work

Análise das propriedades físicas em estrutura do tecido ósseo de eqüinos

This project has several objectives: To determine medium values and variations of the density, porosity, humidity, shrinkage volume and the coefficient of mass attenuation of gamma radiation of 59,6 keV of the radioisotope 241Am, using samples of equine radio, in growth and adult. The samples of bones were supplied by the Department of Pathology of University of Veterinary Medicine and Zootechnics - UNESP campus Botucatu. Bones of the paws front left of two males were used. Of each bone ten samples were removed. Those samples were prepared to just obtain compact bony fabric, being submitted to the rehearsal of determination of the density by the immersion method in water and determination of the coefficient attenuation lineal for the method of attenuation of the radiation of the 241Am, also obtaining your humidity content. Still, they were obtained new samples starting from the ground samples and verified the density of the particles present in that, obtaining the medium value of the coefficient of mass attenuation. The results showed the medium values and significant statistical variations of the density, porosity, humidity, shrinkage volume and coefficient of mass attenuation of gamma radiation of 59, 6 keV of the radioisotope 241Am in the samples, establishing some relationships between of the certain physical parameters with biological aspects and possible existent influences between them

Determinação de manganêsem águas no entorno de minerações de urânio

The studies of this work aimed to determine the labile fractions of manganese (Mn) in natural and drainage water samples collected around the Osamu Utsumi uranium mine, located in the municipality of Caldas, south-central region of Poços de Caldas- MG, using the technique of diffusion gradient in thin films (DGT). The DGT devices were mounted with Chelex-100 resin, polyacrylamide-agarose hydrogel (conventional porosity) and cellulose acetate membrane. The device were deployed up to 48 hours in six water samples collected from different areas around the uranium mine (075, 076, 022-E, 025-E, 014, and 041). The DGT devices immersed in each sample were gradually removed after 4, 8, 12, 24 and 48 hours. The pH of the samples ranged from 3.0 to 10.5, which influenced the lability and the sampling of the analyte by the Chelex-100 resin. The results showed a linear relationship between accumulated mass and sampling time (immersion curve) for samples 014 and 025-E (pH between 6 and 8) suggesting the ability of the DGT technique for sampling the analyte. The results obtained for samples 075 and 076 (pH<5) and samples 041 and 022-E (pH around 10) were characterized by nonlinear relationships. The values obtained by DGT were compared with Solid Phase Extraction (SPE) technique using Chelex-100. For samples 014 and 025-E, there was a good agreement between the results obtained by both techniques

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)